bi material injection used for sale

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -10°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2021 Tested at 37°C and -10°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 2019 Tested at 37°C and -2°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2010 Tested at 37°C and -2°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the rear wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2008 Tested at 37°C and -10°C Slightly deformed sheet metal at the front

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 2003 Tested at 37°C and -2°C

BINDER KB-115 incubator/refrigerated oven with forced convection 100°C Model: KB115 Refrigerated & Ventilated Capacity: 115 liters Temperature range: -5°C to 100°C Interior glass door Built-in digital temperature display 2 shelves Cable routing: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of Manufacture: 1999 Tested at 37°C and -2°C

Description Bickel HK 3-68 green model with tool for perforating and creasing Working width 700 mm

Substructure for conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor, roller conveyor, roller conveyor stand, frame for roller conveyor -Manufacturer: Soco System, base frame height adjustable -Type: Width 475 mm -Height: 535 to 900 mm, continuously adjustable -Quantity: 1 piece base available -Transport dimensions: 475/180/H535 mm -Weight: 8 kg/pc.

Description Konica bizhub PRO C1060 Used device Machine number: 1819287410 Meter reading as of 02.11.2022: 00942571 from 12-2015 Controller option VI-507 Interface Kit for EFI Fiery IC-308 / IC-415 Print processing IC-415 EFI Fiery integrated print controller bizhub GPRS modem incl. SIM (KPN) Interface to remote maintenance system via mobile radio, modem incl. SIM card f DF-626 Automatic original feeder Paper input PF-707 Large capacity magazine with suction system technology Finishing FS-532 All-In-One-Finisher RU-509 Cooling/smoothing unit Konica bizhub Pro C1060-tech data

Thermalcycler PTC-200 DNA Engine block 96 well Pcr BIO-RAD Temperature range: approx. -5°C to 105°C Heating/cooling speed: up to 3 °C/s Temperature accuracy: 0.3°C to 90°C Capacity: 96 wells (double block) Dimensions (W x D x H): approx. 30 x 35 x 30 cm Weight: approx. 12 kg Power supply: 100-240 V, 50/60 Hz With Alpha BioRad PTC DNA Engine Systems Thermal Cycler PCR Lab Unit Block (Serial No.: AL057123)

Size: 680 mm Equipments: with 1x perforating tools with 1x creasing tools perforating machine with electric motor

Size: 610 mm Equipments: with 1x perforating tools with 1x creasing tools perforating machine with electric motor

Excellent condition - Fully operational - Loading / Transport possible! power: 25.6 kW Air supply: 6.5 - 7.5 bar suction flow rate: 30 m/sec Travels: X-axis: 3060 mm Y-axis: 1080 mm control system: NC 500

BIG adapter Manitou to Euro, Own weight: approx. 170 kg, Dimensions:, Bolt top: Ø 80 mm, Bolt bottom: Ø 36 mm, Bolt spacing (center to center): 350 mm

BIG adapter Manitou to Euro, - Self-weight: approx. 170 kg, Dimensions:, Bolt top: Ø 80 mm, Bolt bottom: Ø 36 mm, Bolt spacing (center to center): 350 mm

Applied Biosystems Hitachi 3130XL Genetic Analyzer 16-capillary electrophoresis instruments for medium-throughput laboratories. It is fully automated, from polymer loading and replacement to DNA data separation, detection, and analysis. Technical specifications: Voltage: 220-240 V External dimensions (W) x D x H: 74 x 51 x 82 cm Untested equipment, without a computer

Belt width: 300 mm, Speed: max 250 slices/min, Slice thickness: 0.5 - 30 mm, Infeed length: max 600 mm, Product diameter: max 210 x 180 mm, Stacking height: max 60 mm, Blade diameter: 420 mm, Power: 3 x 400V, 50Hz, 2.3kW, DImensions: 2350 x 800 x 1850 mm, Weight: 420 kg

This 3-axis Biglia B301 SM was manufactured in 2006. It features a robust Hainbuch collet chuck for both the main and counter spindle, ensuring precision in your turning operations. The machine has a weight of 3760 kg and operates at a spindle speed of 504 RPM. If you are looking to get high-quality turning capabilities, consider the Biglia B301 SM horizontal turning machine we have for sale. Contact us for further details.

BIG adapter Euro to three-point, - with adjustable lower link hooks and removable trailer coupling, - Net weight approx. 190 kg, - KAT 3

This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details.

BIG Adapter Genie/Terex on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details.

BIG Merlo ZM2 adapter for three-point hitch,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

BIG adapter Euro to three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

SML heavy-duty dump bucket 240cm with JCB Q-Fit mounting, - Net weight: approx. 443 kg, - Volume: 1.56 m3

BIG SUN Swivel dump bucket 240 cm with Merlo ZM2 mount, - Net weight: approx. 351 kg, - Volume: 1.01 m3

BIG SUN Swivel discharge bucket 240 cm with case mounting, - Net weight: approx. 351 kg, - Volume: 1.01 m3

SML Heavy-duty tipping bucket 240cm with Manitou mounting, - Self-weight: approx. 443 kg, - Volume: 1.56 m3

SML heavy-duty dump bucket 240cm with Merlo ZM2 mount, - Net weight: approx. 443 kg, - Volume: 1.56 m3

BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable hitch, - Net weight approx. 190 kg

BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable trailer coupling, - Net weight approx. 190 kg, - KAT 3

BIG suitable for Volvo BM / Liebherr 514, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 61.5 mm, Bottom bolt: Ø 51 mm, Bolt center-to-center distance: 617 mm, Further recordings also available!

Total height 2.10 m incl. castors, lockable for max. big bag format: 90 x 90 x 180 cm Colour: white

- electr. grooving and perforating machine - with the existing accessoies

- Working width: 680mm, Working width: 680mm

A double-turret and double-spindle turning center Biglia including peripherals is available. Spindle power: 11kW/11kW, speed: 7000rpm, bar capacity: 36mm-37.5mm, max. turning diameter: 100mm, max. turning length: 140mm, tool stations: 2×12, Y-axis travel: +/-25mm, X/Z-axis travel: 85mm/300mm, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 3700mm/1450mm/1900mm, weight: approx. 5000kg, control: Mitsubishi M730 with editor, power-on hours: approx. 47000h. Including FMB turbo 3-36 bar loader, Knoll KF10 coolant system, 700l tank, air cleaning unit and an extensive package of collets and tools. Documentation available. An on-site inspection is possible. Expected to be available starting October 2026.

Binder KT 53 53L Cooling incubators - Temperature operation range: 4 °C to 100 °C - Volume: 53 liters are stackable - Internal dimensions (WxHxD): 400 x 400 x 334 mm - External dimensions (WxHxD): 660 x 635 x 630 mm Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

This 3-axis BIESSE Rover 24S was manufactured in 2002. It features a length of 3390 mm and an overall width of 1500 mm, with a conveyor speed ranging from 28 to 140 m/min. The machine has a weight of 710 kg and is equipped with a powerful 1.1 kW motor. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover 24S machine we have for sale. Contact us for further details.

Manufacturer: Bizerba Model: GLM-I Year of Manufacture: 2006 Condition : Regularly serviced unit. Major components professionally refurbished by a certified Bizerba technician. Machine was fully operational until replaced and was used daily. Technical Specifications - Maximum weighing capacity: 6 kg - Minimum weighing capacity: 20 g - Scale interval (e=d): 1 g - Power supply: 230 V / 50 Hz / 2.4 A - Calibration zone: 2 - Approved for use as control measuring device for packages up to 50 e up to maximum load Calibration:Calibration expired December 2025. Find more here - / Contact us at -

II sell a BITZER screw compressor. Fully functional. The compressor has 18470 working hours. It worked in a production hall on a chiller with a water condenser. The compressor has a power supply of 660 - 720 V The compressor worked with R 134a refrigerant.

: neu : ca. 10 Wochen ab Auftrags : Italien : 10860 € : 208.51 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 370x140 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 830 mm : 1650 mm : 1200 mm : 1850 mm : 390 kg hydraulicvice saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking, Quick bow pull-down hydraulically operated, Blade rotation and cooling liquid start-up, Working pull-down, end of the cutting cycle, Stop of blade rotation and supply of cooling liquid, Quick bow lift-up, Stop of bow upwards movement, vice unlocking if selected. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bickel Slotting and Perforating Machine E. Bickel K.G. Heilbronn Type: H1/50 Machine No.: 21153 / Bauj. 1985 Tabletop device with 50 cm working width Groove comb with 2 groove thicknesses Perforating comb ( functional / difficult to use ) Cleaned and tested 950,00 € plus 19 % VAT Bickel grooving and perforating machine E. Bickel K.G. Heilbronn Type: H1/50 Serial: 21153 / YOM: 1985 Tabletop device with 50 cm working width Grooving comb with 2 groove thicknesses Perforating comb (functional / difficult to install) Cleaned and tested 950,00 € ( Tax free Intra-Community supply / VAT number needed )

Bickel Slotting and Perforating Machine E. Bickel K.G. Heilbronn Type: H1/50 Machine No.: 21153 / Bauj. 1985 Tabletop device with 50 cm working width Groove comb with 2 groove thicknesses Perforating comb ( functional / difficult to use ) Cleaned and tested 950,00 € plus 19 % VAT Bickel grooving and perforating machine E. Bickel K.G. Heilbronn Type: H1/50 Serial: 21153 / YOM: 1985 Tabletop device with 50 cm working width Grooving comb with 2 groove thicknesses Perforating comb (functional / difficult to install) Cleaned and tested 950,00 € ( Tax free Intra-Community supply / VAT number needed )

NEW, - 240 cm width, - 0.90 m³ capacity, - 440 kg net weight, - with Merlo mount, - crocodile shovel / pelican shovel with 2 hyd. Cylinders, - strong double stiffened hold-down device, available in different working widths and with different mounts

Rated power: 20 kW, voltage: 400 V AC, includes a silo. On-site viewing is available, the system is fully operational.

: neu : ca. 10 Wochen ab Auftrags : Italien : 11070 € : 212.54 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 m/min : 280 mm : 240 mm : 420x200 mm : rund 260 mm, quadrat 240 : rund 170 mm, quadrat 160 : rund 200 mm, quadrat 180 : 830 mm : 1600 mm : 1400 mm : 1800 mm : 438 kg manual vice with lever for quick clamping gravity downfeed with adjustable damper 2 speeds coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Control MITSUBISHI M 700 Bar Passage 37.5 mm 2 x 12-speed revolver with attached revolver Wkz. 2 x C-axis 2 x Y-axis Main/sub-spindle FMB Bar Loading Magazine turbo 3-36 Knoll Coolant Preparation KF 10 Chip conveyor Renishaw Probes Parts catcher Conveyor belt for precast elements Air filter 2 x Collet Chuck Tool holders and collets