129,353 used machines on RESALE, but how to find them? Machine Search
Refrigerant compressors system Bitzer -Type: 4NES-20Y-40P (x2), 4NCS-20.2Y-40P (x2) -Volume: 56.2 m3/h (x4) -Cooling capacity for R404A: 154 kW at -5°C/40°C, 125,6 kW at -10°C/40°C, 61,4 kW at -25°C/40°C -Dimensions: 2100 x 900 x 1830 mm -Items in magazine: 1 -Reference number: Z114 -Condition: Used in very good condition, ready to work
MODITEC shredder type BIGGER 10 Year: 08-2004 Voltage: 400V Power: 5.5 KW Weight: 1800 kg
A fully equipped bistro is available. Components: 1) Dish conveyor dishwasher. 2) Furniture. 3) Small and large kitchen equipment. 4) Customer furnishings such as tables, chairs, and self-service counters. 5) Refrigerators. 6) Deep fryers and grills. 7) Cash registers and scales. 8) Dishes, plates, etc. 9) Extraction and filtration technology. Documentation available. An on-site inspection is possible.
A non-automated BITO pallet racking system is available. Bay width: 3600mm, max. shelf load capacity: 2300kg, shelf spacing: 1725mm, upright type: P20, load carrier: Euro pallet, pallet dimensions X/Y: 1200mm/800mm, pallet weight: 500kg, max. bay load at 1725mm buckling length: 16000kg. Documentation available. An on-site inspection is possible.
A mobile pallet racking system BITO is available. Upright type: P20, compartment distance FA1/FA2: 1725mm/1725mm, bay width 1/2: 2700mm/3600mm, beam type 1/2: PT27.82LN/PT36.127LN, load carrier: Euro pallet, dimensions X/Y: 1200mm/800mm, weight: 500kg, max. compartment load: 1500kg/2000kg, max. bay load at 1725mm buckling length: 12000kg/16000kg, top storage level: 5175mm+215mm, max. carriage load: 120000kg, mobile racks: 6, carriage depth: 2650mm, carriage length: 27966mm, transfer carriages: 2, max. travel speed: 4.5km/h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026.
We have a unit with Bitzer compressors for sale. System wit R744 refrigerant (CO2) The unit capacity is 22kW -35C To and -5C Tc. Control panel with frequency inverter.
Two drying and heating ovens Binder for laboratory use are available. 1) Binder ED 400, usable volume: 400L, internal dimensions X/Y/Z: 1000mm/800mm/520mm, levels: 2, max. load per level: 35kg, max. total load: 90kg, recommended wall clearance rear/side: 160mm/100mm, max. temperature variation: +/-3K, max. temperature: 300°C, power: 3.4kW, machine dimensions X/Y/Z: approx. 1250mm/1050mm/800mm, weight: approx. 125kg. 2) Binder KBF 115, usable volume: 100L, max. temperature: 100°C, power: 1.7kW. Documentation available. An on-site inspection is possible.
Key data: 650 mm, 1500 mm
Manufacturer : Okuma Multus U 4000 1 SC 1500 Big Bore Control : OSP P 300 S with 3D-M-E kit; IGF Advance M-E kit Year of construction : 07/ 2014 Switch-on hours : approx. 19500 h Spindle hours : approx. 12500 h Availability : direct from location Specifications Turning Ø over bed: 650 mm Distance between tips: 1,500 mm Maximum turning diameter: Ø 650 mm Maximum rotatable length: 1,500 mm Rod passage (main spindle): Ø 112 mm ( Pull tube 90 mm ) Spindle Nose (Type): JIS A2-11 Spindle speed: 45 - 3000 rpm Motor: 30/22 kW (30 min/cont) Max. torque : 955 Nm X-axis: 695 mm Z-axis: 1,600 mm Y-axis: 300 [± 150] mm B-axis: -30° to +210° (0.001° ) as full NC axis C-axis: 360° (0.0001° increment) Milling spindle: Tool holder : Capto C 6 Number of tools: 80 positions Spindle speed: 50 - 12,000 rpm Engine: 22/11 kW Dimensions and weights: F ...
Key data: 380 mm, 650 mm, 3000 1/min
CNC lathe with driven tool stations Manufacturer : Biglia Model : B 658 MB CNC Control: FANUC Series 18i-TB Year of manufacture : 2004 Condition : good , fully functional Location : Hultsfred -Sweden Availability : in stock Specifications Maximum turning diameter: 380 mm Maximum rod diameter: 80 mm Maximum passage: 620 mm Maximum turning length: 650 mm Feed in the X/Z/B axis: 220/650/660 mm Rapid traverse in the X/Z/B axis: 20/24/12 m/min Spindle speed: 30-3000 rpm Spindle bore diameter: 90 mm Spindle tip height: 1055 mm Inner diameter of the front bearing: 130 mm Spindle End: ASA 8" Spindle drive power: 26/22 kW Diameter of the lathe chuck: 315 mm 12-position bidirectional turret Outer lathe chisel shank: 25×25 mm Shaft of the internal turning tool: ⌀ 40 mm Indexing of the turret (by 1 position): 0.1 s Driven tool stations 12 positions Max. speed driven ...
Reference Num.: 4228 Brand: Konica Minolta Type: bizhub PRESS C1100 Construction year: 2018 Impressions: 1 mio Available: directly Status: In production Location: Deutschland Equipment: - Finisher FS 532 - RE-511 Kühl-/Glättungseinheit - Großraummagazin PF-708 - IC-308 EFI Fiery external Controller
Key data: 40000 KG, 3600 mm, 4500 mm
242 pieces Frame P6 / Height 4,500mm / Depth 1100mm / Max. bay load 10,000 kg / Galvanized 880 pieces trusses PT150S / length 3600mm / 4000kg with equal distributor load, blue painted incl. locking pins
Key data: 80000 KG, 3600 mm, 4500 mm
484 pieces Frame height 4,500mm / depth 1100mm / Max. bay load 10,000 kg / galvanized 1760 pieces trusses length 3600mm / 4000kg with equal distributor load, blue painted incl. locking pins Total 9600 pitches
NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Dieci Agri Farmer intake
Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife including original Bizerba sander medium-sized carriage for a maximum of 40 cm of food to be cut Stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2009 Function checked, machine ready for immediate use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.
Inclined Slicer Slicer / Slicer BIZERBA GSP H Specifications: 230 Volt / 50 Hz / 1.79 A / 0.360 kW Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife including original knife sharpener Luminous flux Year of Make: 2017 Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Fully automatic slicer Bizerba Type: A404 Specifications: 230/400 volts, 50 Hz, 2.5/1.4 A Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife medium-sized carriage for a maximum of 40 cm of food to be cut Stainless steel base frame Power current Output: between 30-55 strokes/min 99 different programs can be saved Year of Make: 2009 Function checked by a specialist, machine immediately ready for use! Stock machine, immediately available! Condition, see original pictures! If you have any questions, email or call.
Offer 25146 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 6 m - EWM water-cooled burner package with 4 m extraction function - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg
Offer 25147 Specifications: - Portable version suitable for CrNi steels - Air volume flow approx. 200 m³/h - Max. vacuum 19000 Pa - Filter area approx. 0.8 m² - Filter separation efficiency 99.9% - Extraction connection 60 mm - Suction hose 5 m - Burner package water-cooled with suction function 4 m - Start-stop automatic - Dust drawer - Drive - Fan 230 V / 1.1 kW - Space requirement approx. W 650 x H 600 x D 250 mm - Weight approx. 25 kg
NEW, 219 kg weight, 2 cylinders, with Euro mount
NEW, 240 cm width, 1.01 m³ capacity, SUN version - with welded-in Hardox scraper bar 150 x 16 mm, 351 kg dead weight
Cone splitter JSK-350-MS01, splitting cone, drill cone, log splitter, 1x hydraulic earth boring device HBG-1500 (for mini excavator, tractor, front loader), 1x adapter, quick coupler MS-01 (for HBG-1500 and HBG-2000), 1x Jansen splitting cone, 1x jansen fixation adapter splitting cone
Pallet fork 2 t with Bobcat 90 cm holder, FEM2, tine carrier 102 cm
volume bucket for Genie / Terex attachment, 200 cm width, 1.60 m³ capacity, many other attachments on stock
2.0 t capacity, 80x40x1200 mm tines, with Bobcat T30.60 & T35.105 telescopic handler mount
NEW, width 200 cm, 250 kg net weight, 0.70 m³ capacity, with Genie/Terex mount
NEW, width 220 cm, 266 kg dead weight, 0.75 m³ capacity, with JCB Q fit mount
Dimensions LxWxH: 40x45x39 cm
NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount
NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount
60 cm working width, with teeth, with Martin M10 mount
110 cm working width, suitable for 20 t excavator
Working width 35 cm, with Martin M10 mount
BIG backhoe bucket 80 cm working width and teeth, fixed bolted, dimensions of the pick-up:, bolt diameter front [handle side]: 70 mm, bolt diameter rear [bone side]: 60 mm, handle/pick-up width: 280 mm, pick-up width at the bone: 260 mm, bolt spacing [center - middle]: 380 mm, suitable for 14-22 t excavators, further assortment of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Despised, JCB, Geith, etc. available.
NEW, 70 cm width, with Martin M03 mount, 99 kg dead weight, suitable for 2.8 - 3.9 t excavators
NEW, 80 cm width, with Martin M03 mount, 125 kg dead weight, suitable for 2.8 - 3.9 t excavators
NEW, 50 cm, with Martin M10 mount, 163 kg dead weight, suitable for 5.6 - 9 t excavators
NEW, 30 cm width, with Lehnhoff MS01 Symlock mount, 44 kg dead weight, suitable for 1.9 - 2.7 t excavators
NEW, 30 cm width, with Lehnhoff MS03 Symlock mount, 89 kg dead weight, suitable for 4 - 5.5 t excavators
NEW, 100 cm width, with Lehnhoff MS03 Symlock mount, 207 kg dead weight, suitable for 4.0 - 5.5 t excavators
NEW, 30 cm width, with Lehnhoff MS08 Symlock mount, 121 kg dead weight, suitable for 5.6 - 9.0 t excavators
NEW, 50 cm width, with Lehnhoff MS08 Symlock mount, 163 kg dead weight, suitable for 5.6 - 9 t excavators
NEW, 150 cm width, with Lehnhoff MS08 Symlock mount, 196 kg dead weight, suitable for 5.6 - 9 t excavators
NEW, 250 cm width, 2.15 m³ capacity, 585 kg dead weight, with Merlo ZM2 attachment, Also other recordings such as Atlas, Avant, Bobcat, Cat, Claas, Deutz Fahr, Dieci, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Manitou, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Terex, Volvo, Weidemann, Zettelmeyer available!
NEW, Genie / Terex adapter with Euro mount, 140 kg dead weight
maximum number of results exceeded
please refine your search
