beton station used for sale

Turning station, turning table, turning station, turntable, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press -without: hydraulic unit (can be delivered at an additional cost) -Turning station for: turning workpieces -Interior width: 1075 mm -Inside height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Turning station, turning table, turning station, turntable, transport system, roller conveyor -for: edge banding machine, edge banding machine, edge banding machine -Turning station: for turning workpieces -Roller conveyor: wide -Roll width: 2900 mm -Roller conveyor length: 1500 mm -Turning head roller: rubberized -other roller conveyors available for an extra charge -Transport dimensions: 1500/3850/H1950 mm -Weight: 969 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Execution: stable -Drive: electric -Drive motor roller conveyor: 0.37 kW 71 rpm -Drive motor conveyor belt: 0.37 kW 88 rpm -Roll width: 1440 mm -Conveying length: 1400 mm -Transfer of conveyor belts: 1400 mm -pneumatic lifting -Diameter roller: 105 mm -Rollers: rubberized -Diameter shaft: 25 mm -Delivery height: 2150 mm adjustable -driven: via toothed belt -Dimensions: 1600/1750/H2150 mm -Weight: 500 kg

Soldering station, soldering iron, chip solder, soldering system -Temperature adjustable: 100-375 ° -Dimensions: 200/105 / H90 mm -Weight: 2.7 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -Drive: electric -2x drive motor roller conveyor: 0.75 kW -without drive motor conveyor chain -without conveyor chain -without raising -Roll width: 840 mm -Conveying length: 2300 mm -Transfer of conveyor chain: 4700 mm -Diameter roller: 50 mm -Delivery height: 400 mm adjustable -Dimensions: 2400/5400/H400 mm -Weight: 1200 kg

Corner transfer unit, roller conveyor, roller conveyor, powered roller conveyor, roller conveyor, roller conveyor with extraction conveyor -stable execution -without drive motor roller conveyor -can be installed at an additional cost -Roll width: 700 mm -Conveying length: 1780 mm -Diameter roller: 80 mm -Transfer of conveyor chain: 880 mm -Transfer of conveyor chain width: 950 mm -1x drive motor conveyor chain: 0.37 kW -Speed: 11.4 m/min -pneumatic lifting -Delivery height: mm adjustable -Number: 1x stations available -Price: per piece -Dimensions: 1850/1450/H550 mm -Weight: 386 kg

Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg

Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current bra number only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for th ...

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Hydroelectric power station - Power 790 kW composed of: 1 Turbine Pelton / Effective gradient 223m / Water volume 400 l/s / 1 piece generator 1 shut-off device 1 hydraulic power unit 1 piece transformer

Used three-station slat banding machine by KURZ model LS101. New 1998. Allows trimming of three sides of the profile in one pass.

Dear Ladies and Gentlemen, we have transformer stations 250KVA 20KV on 400V built in 1992 See photos If you have any further questions, please call 00491727265324

3-axis welding station including 6-axis robotic arm complete with extraction hood and torch cleaning fume purification

TFT FCS 720 - 3 Station Thermoforming Machine The machine working hour is 73.000. Year 1994. Max Tooling Area : 685x500150 Min Tooling Area : 350250 Max Forming Area ( ROLL ) : 720500 Maximum Cycyle : 35 Maximum Material FOR FORMING : 1,5mm. It’s avaliable for PS,PET,PVC, PET. It has tauten but we advice pre-heater for PP.

Used CIP station composed of: - 4 tanks with a capacity of 3000 L each: fresh water, acid, lye, hot water - 2 disinfectant tanks - 2 steam-water heat exchangers for heating media - 1 steam-water heat exchanger for heating secondary water - 2 gu30/30 pumps, 1 gh 20 pump - 1 control cabinet – Siemens PLC control - pipes + valves + meters + sensors

Silberhorn 6-Station Rotary Table System In this rotary table cleaning system, the cleaning processes run in parallel and in the highest quality: Station 1: Loading and unloading Station 2: Cleaning with tank 1 Station 3: Rinsing with tank 2 Station 4: Rinsing with tank 2 Station 5: Pre-drying with side channel compressor Station 6: Vacuum drying This is what makes this 6-station rotary table system so powerful and ideal for cleaning large series. Installation area: approx. 3,600 mm x 3,530 mm x 6,900 mm (W x H x L) Goods window: approx. 450 mm x 300 mm x 150 mm Areas of application: Cleaning of series and large series Doors of the stations equipped with safety glass – this facilitates process observation Cleaning cycles of less than 30 seconds can be achieved Goods windows also for large parts Very robust and precise design of the system. This makes it possible to ...

Wing stop center Make: ITS Fenstertechnik Type FAZ 2800 No. 526 Built in 1991 With screw feeder Powasert Type ADS-UF Table support with brush strip Table length 2800 mm Table width 1400 mm Table height 950 mm Table can be tilted by approx. 15° Total length 2950 mm Width 2000 mm Height 1000 mm + Screw feeder

Key data: 600

MWM TCG 2016V12 600 kW el. power, 50 Hz after main overhaul with, also prepare TC, Intercooler, alternator) genset. Fully completed - also possible option add: control panel, power switch automat, container, cooling an heat system.

Year of construction 2008 Pumping and control station Previously used on Heidelberg machines Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Falzwerk 3. Station Eigensteuerung  / Folding Unit 3. Station SelfControl MBO T79-3-46/2 Baujahr / Year 1994 - Serial-No. 940114747 2 Taschen Falzwerk / 2 buckles folding unit Arbeitsbreite max. 460mm / Working width  max. 460mm Eigensteuerung / SelfControl   Nachgelagterte Messerwelle /  rear mounted slitter shaft -Online-Video-Inspection by Skype-Video-   -We would be very pleased with your visit - more machines on Stock-   -Available Immediately - Can be inspect-   -On Stock Emskirchen / Nuernberg - Can be test-

Banderolieranlage fuer Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3 Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Falzwerk 2. Station Eigensteuerung  / Folding Unit 2. Station SelfControl MBO T79-2-81/4 Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width  max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle /  rear mounted slitter shaft -Online-Video-Inspection by Skype-Video-   -We would be very pleased with your visit - more machines on Stock-   -Available Immediately - Can be inspect-   -On Stock Emskirchen / Nuernberg - Can be test-

Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel

Compressed air screwdriving station 4 PCS available Price per piece VAT not deductible Please inquire with location and postcode.

Modular cell culture station in hypoxia Biospherix X2-072514-1-00 1. Isolated workstation for cell culture work under controlled conditions. 2. Multiple incubation chambers, with independent O2/CO2/RH programming. Various sizes and configurations. 3. The incubation sub-chambers have doors that open into a large glove handling area with an aseptic and temperature, O2 and CO2 controlled environment. 4. O2 control from 0.1% to 99.9% is possible in each incubator. 5. Low humidity interior atmosphere in the crop handling chamber that reduces the risk of contamination. 6. Heated interior atmosphere and work surface. 7. Chambers for housing equipment (microscopes, bioreactors, centrifuges, pipetting stations, refrigerators, lyophilizers, cell sorters, robots, FACS, etc.) also with controlled atmospheres. 8. Control of the O2 level also in the SAS or input/output exchange airlock for ...

Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

TF Winding Technology Rewinding Station TFU 1202 The rewinder can be programmed via a hand-held terminal and offers a fully automatic winding process. It can be rewound from left to right or right to left, with or without a loop. The torque is also adjustable. The device is fully functional and has hardly been used. Feel free to contact us if you have any further questions.

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/3F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 2002

SECOND-HAND CARROUSEL FOR CORNER BLOCKS WITH 4 WORKING STATIONS

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor -Transfer station: roller conveyor with conveyor belt, solid base frame, height adjustable -Speed: roller conveyor 51 m/min / conveyor belt 45 m/min -Conveyor rollers. Ø86 x 1415 mm rubberized wheels -Roller distance/axle distance: 205 mm -Belt spacing: 200 mm -Conveyor belt length: approx. 2290 mm, dimensions see technical photo. drawing -Drive/gearbox: 2x Nord, see photos of nameplates -Raising: hydraulic, without drive unit -Transport dimensions: 2480/2380/H810 mm -Weight: 1180 kg

Inv. Num. : 5843 Type: MBS 6000 Producer: FUCO-HEG Created: 2019 Parameters: Control system: Siemens Gas flow: 7-15 l/min Carburetor Head: Steel Crane Systems ST1004 Headstroke: 4 m/min Weight: 800 kg Length: 1000 mm Consumables: nitrogen and argon Purpose: Degassing and purification of aluminium melts with nitrogen or argon with a maximum pressure of 5 bar

PME inline embossing station for integration into an existing laminating line (coarse linen): - Rubber counterpressure roller (diameter: 250mm) - A water-heated embossing roller (diameter: 254mm) - Web tension control with load cell - Pneumatic adjustment of the counterpressure roller - Pitching pressure in the pinch gap 100kN - Main drive with 5.5 KW - Maximum mech. Speed: 60m/min. - Maximum working width: 800mm - Connected load: approx. 30KW - Power consumption: approx. 20KW - Compressed air requirement: approx. 2.5 Nm³/h at 6 bar - Easy to change the embossing roller - Year of construction 2013

Description: Dimensions of the washbasin: 650 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 900 mm, weight approx.: 200 kg

Key data: 130 , 200

MAN gas generator enclosed in sound proof chamber, in good condition. It has the following specifications: Manufacturer: MAN Fuel: Gas Manufacture year: 2010 Kva: 200 Power: 130 kW Other specs: Turbo included. Control panel included.

Corner transfer, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor, roller conveyor with puller conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base: solid base frame, height adjustable -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller track: conveyor track rollers. Ø63 x 2500 mm, conveyor belt 17 x 2815 mm -Conveyor track: 6 belts 17 x 2830 mm -Drive/gearbox: North, see photos of nameplates -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Dear Ladies and Gentlemen, We now have used transformer stations available Year of construction : 2004 Power : 1000KVA Primary voltage : 20kV Secondary voltage: 400V, Groupset: DYN5 Switchgear: SF6 Station Dimension : Length: 250 cm Width: 240 cm Height: 245 cm Weight: 11 ton At call Nationwide cheap delivery. If you have any further questions, please do not hesitate to contact Mr. Schmidt. Available Monday to Saturday from 8 a.m. to 8 p.m. CLOCK and in case of emergencies 24 hours

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Scania Schnell Engine in good condition with the following specifications: Power: 250kW Mfy: 2006 Fuel: Gas /Diesel (Dual fuel) Voltage: 400V

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg

Bohle stationary column for drums and containers, suitable for feeding tablet presses etc. Maximum weight 600kg.

Available 2 units of this tranformer center on container with the transformer and his cell. Power:1600KVA Rate: 400-20000V YOM:2009-2007

Key data: 790 KW, 738 kVA, 400 V

Deutz / MWM Gas CHP (Container) TBG 620 V12 Landfill gas generator from 1999 with 150,200 operating hours, E40 12/22, complete (container) with cooling. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2-CG, 1,100 KVA Gas engine Deutz / MWM TBG 620 V12 Manufacturer: Deutz / MWM Model: TBG 620 V12 Type: Gas Engine (Landfill Gas) Serial Number: 2200633 Power [KW]: 790 Year of construction: 1999 Hours: 150,200, E40 12/22 Weight motor and generator [kg]: 7.800 Dimensions LxWxH [cm]: – AC Generator Stamford HC I634K2-CG Manufacturer: Stamford Model No.: HC I634K2-CG Type: AC Synchronous Generator Serial number: 0103530/01 Power [KVA]: 1,100 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1602 Speed [1/min]: 1,500 Year of construction: 1999 Weight [kg]: 2.513

Limitec mobile container tipping and emptying device, for turning and emptying containers with a volume of approx. 70 litres, a diameter of 378 mm and a height of 604 mm, lifting weight max. 80 kg, electr. connection 400V/ 50Hz/ 0.6KW, machine dimensions 1300 x 730 x 1816 mm (L x W x H), machine weight approx. 200 kg.

Key data: 2000 KW, 2500 kVA, 10000 V

Deutz / MWM Gas CHP (Container) TBG 620 FV 20 Gas-fired power generator (mine gas) from 2003 with 95,000 operating hours, 22,000 operating hours after major maintenance, complete (container) with cooling. 1 available, 1,938 KWel x 1,500 rpm, 10,000 V/50 Hz (transformer 400 V optional). AC generator: AVK DIG 130 l/4, 2,500 KVA Manufacturer: Deutz / MWM Model: TBG 620 FV 20 Type: Gas Engine (Mine Gas) Serial Number: 2204013 Power [KW]: 2,000 Year of construction: 2003 Operating hours: 95,000 / 22,000 after major maintenance Weight motor and generator [kg]: 18.500 Dimensions LxWxH [cm]: – AC generator AVK DIG 130 l/4 Manufacturer: AVK Model: DIG 130 l/4 Type: AC Synchronous Generator Serial Number: 84 25722 A101 Capacity [KVA]: 2,500 Voltage [V]: 10,000 Frequency [Hz]: 50 Electricity [A]: 44 Speed [1/min]: 1,500 Year of construction: 2003 Weight [kg]: 7.100

Description: Consisting of polishing stand with brush, polishing stand with sanding plate, double bench grinder from the manufacturer SOLID (type: DS0, speed: 2990 rpm) Total table dimensions: approx. 1000 x 650 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 950 x 1,300 mm, weight approx.: 600 kg

weight approx.: 400 kg, Approx. Onsite Dimension. (l x w x h): 2,800 x 1,500 x 1,250 mm

Approx. Onsite Dimension. (l x w x h): 2,300 x 1,900 x 1,200 mm, weight approx.: 500 kg