beton station used for sale

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

Pumping station for external system cooling, specifically for LEYBOLD sputtering systems H 3200 the sputtering is one other offer on ebay offered and is not included in this offer the facility had not made it to production, is as good as new

Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed on the fly. Foam applicator with mixer • Dynamic foam mixer with online dosing of 5 products + water • 5 dosing pumps • A direct inlet for the mixture • Product monitoring for chemicals • Air dosing valve • Dynamic foam mixer with adjustable speed • PLC control • Foam applicator • For one-piece carpets up to 1 m wide Uses Stain Blocker Dirt, water and oil repellents Fluorocarbons Anti-Static Chemicals Plasticizer Flame retardant Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agent Resins for wrinkle prevention and dimensional stability Specificat ...

Screws station from the PV or solar industry, which gets just Aufwindabsolut as new ca 30 BetriebsstundenNeupreis for both plants, lt invoice 256.000,-€ to the mount out of so-called carrier frame inserts Graphitzum coat 2 stations in this range of solar modules for subsequent thermal treatment are Duennschichttechnologiees, are hardly separable, there is only a control or control cabinet for the whole SystemUnterlagen are available

Installation 2020 Plant shut down after 6 months and short test runs Original price 166.000,00 € Dosing and screening station Products - Product Name: Spices - Bulk density: approx. 0.4 - 0.7 kg/itr (AZO assumption) System characteristics Electrical characteristics Operating voltage: 230/400 V; 50 Hz. Control voltage: 24 VDC Degree of protection: IP 54 Compressed air characteristics Operating pressure: min. 5 bar /max. 6 bar Connections > 1/2" Compressed air quality class according to ISO 8573-1 Solid impurities: quality class 1 Humidity - at ambient temperature > 3°C: quality class 2/3 - at ambient temperature 10 mJ - KST value < 200 bar m/s - ignition temperature > 300 °C - Smoldering temperature > 275 °C - Contact Resistivity > 10° Ohmm

Soco System packing station system 14800mm Double Deck Roller Conveyor with 800mm Steel Rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9850 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm with drive and two continuous flaps Curve with conical rollers 90° with two drives for high loads 6000 mm roller conveyor with plastic rollers 600 mm Ø 48 mm with drive 9750 mm Roller conveyor with plastic rollers 600 mm Ø 48 mm without drive 6 x Rocholz Packing and Work Tables System Flex Cardboard magazine Workplace lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Shelf Width 2000 mm Depth: 800 mm 6 x 1000 mm transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers  ...

Big Bag Station

Leybold pump stand Consisting of: pump 1 Leybold Sogevac SV 300 (optionally with water cooling or air cooling) pump 2 Leybold Ruvac WAU 1001 H The individual pumps or the entire frame can be transferred. A service is 12 months in a general recovery. Several frames, versions available!; ready for use

Key data: 2500 KW, 10500 V

New industrial gas generator set based on MTU Series 4000 engine. Designed for reliable continuous power generation in industrial facilities, CHP plants, and energy projects. Key specifications • Engine: MTU 20V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 2500 kW • Frequency: 50 Hz • Speed: 1500 rpm • Configuration: V-20 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Energy projects and microgrids Condition: New Availability: On request Location: Europe Contact for detailed technical documentation and price PM: infobscgroup.eu

Pump station VR 0632 B consisting of: 2 pieces rotary vane vacuum pump circulating Manufacturer: Busch Type: R5 RA 302 D Transferables: Mineraloil Delivery time: ex-stock; ready for use

Power supply: 230V 50Hz (1-phase) very good condition - nearly new; ready for operation

Mueller Martini 351.0412 unwinding station Built in 2000; working condition

Key data: 2000 KW, 10500 V

New industrial gas generator set based on the MTU Series 4000 engine platform. Designed for reliable continuous power generation and combined heat and power (CHP) applications. Key Specifications • Engine model: MTU 16V4000 L64 FNER • Fuel: Natural gas / biogas • Electrical output: approx. 2000 kW • Speed: 1500 rpm • Frequency: 50 Hz • Configuration: V-16 gas engine • Electrical efficiency: up to 44 % Applications • CHP power plants • Industrial power supply • Data centers • Distributed energy systems and microgrids Condition: New Availability: On request Location: Europe Contact for price, delivery time and detailed technical documentation PM : infobscgroup.eu

Station consists of two cylindrical tanks arranged one above the other and fixed via pipes with a funnel system "vacuum" to dissolve the solids, with the pump and heat exchangers. The capacity of pickle station is 1000 – 1 000 l/h.

Roll-up station 0422 year 1996; ready for operation

5,000 litre storage containers According to DIN 6616/D, above ground, double-walled, incl. officially recognised test certificate. The tank has two saddle feet, a manhole DN 500 with domed lid, is used, inside empty and professionally cleaned and is equipped with the following fittings: 1 nozzle with TW closure (filler cap) and dip tube,. 1 sounding pipe provided with dip stick and sounding Rod seal, 1 vent pipe with vent hood, 1 new limit switch with type approval (AIII), 1 head and 1 spare socket for harvesting purposes, 1 optical leak display device with type approval and leak fluid. The container is outside new primed and painted. L = 2.80 m / D = 1.60 m / weight CA. 1.3 tons. / free charged ex works. Description PTO pump: Non calibratable type eco-box-55- Capacity up to approx. 55 l / min. suitable for diesel fuel, incl. -Automated fuel dispenser with PC softwa ...

Key data: 2300 KW, 10500 V

High-efficiency industrial gas generator set based on the proven MWM TCG 3020 V20 engine platform. Designed for reliable continuous operation in power generation and combined heat and power (CHP) applications. The unit offers high electrical efficiency, long maintenance intervals, and excellent fuel flexibility, making it suitable for natural gas, biogas, landfill gas, and other gaseous fuels. Key Specifications • Engine model: MWM TCG 3020 V20 • Configuration: V-20 gas engine • Electrical output: up to 2300 kW • Rated speed: 1500 rpm • Frequency: 50 Hz • Fuel type: Natural gas / Biogas / Landfill gas • Electrical efficiency: up to 45 % • Total efficiency (CHP): up to 87 % Technical Highlights • Proven MWM TCG 3020 series engine platform • Long service intervals (up to 80,000 operating hours overhaul interval) • Optimized for high-effi ...

Robotic storage station Manufacturer: Stäubli Type: MPS360 Built in 2006 Height: 1500 mm Number 4

Pump station VR 0632 B includes: 2 piece rotary vane vacuum pump Oelumlaufgeschmiert Manufacturer: Busch Type: R5 RA 302 D Beriebsmittel: Mineral oil Delivery time: In stock; ready for operation

Key data: 1500 KW, 400 V

New industrial gas generator set based on the reliable MTU Series 4000 engine platform. Designed for continuous power generation in industrial facilities, CHP plants, and distributed energy projects. Key Specifications • Engine: MTU 12V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 1500kW • Frequency: 50 Hz • Speed: 1500 rpm • Engine Configuration: V-12 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Distributed energy systems and microgrids Condition: New Location: Europe Availability: On stock Please contact us for price, detailed technical documentation, and delivery conditions. PM : infobscgroup.eu

LEYBOLD pump stand consisting of: Pump 1 LEYBOLD Sogevac SV 300 (optional with water cooled or air cooled) pump 2 LEYBOLD Ruvac WAU 1001 H Each pump or the entire frame can be readmitted. A warranty is a complete overhaul of 12 months. Multiple racks, versions available!; ready for operation

Machine name: BI Pack Manufacturer: OPEM Year of construction: 2006 max speed/power: 200 pads / minute Dimensions: approx. 2m x 2, 3m height: 2m Weight: 1000kg Power supply: 400 v & 50 Hz Compressed air consumption: 0,6MPa Detailed machine function: new double Schlachbeutelmaschineum to for example: coffee pods individually through print mark control in foil to pick. Each bag can be individually printed by the attached printer. 2 seperate treadmills incl. Counter is also available. PLC manufacturer/model: OMRON more info: new price â?¬120,000

Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours! Operation is done with heating oil ! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc. av ...

Aerospace telephone system, radio network -Manufacturer: Cisco, Aironet BR1310 -Type: AIR-BR1310G-E-K9-R -Dimensions: 205/205/H80 mm -Weight 1.1 kg

Ladies and gentlemen, we have and now available used transformer stations Built: 2000 Power: 1000KVA Primary voltage: 20kV Secondary voltage: 690V, Switching group: DYN5 Switchgear: SF6 Immediately ready for use and available, nationwide good delivery. If you have any further questions, Mr. Serhan is here for you, available Monday to Saturday from 8 a.m. to 10 p.m. and 24 hours in case of emergency

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

Soldering station, soldering iron, chip solder, soldering system -Temperature adjustable: 100-375 ° -Dimensions: 200/105 / H90 mm -Weight: 2.7 kg

Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

Soldering station, soldering iron, chip solder, soldering system, desoldering station -Manufacturer: Weller, desoldering station type WDD 81V -Voltage: 230/24 V -Operating pressure: 4-6 bar -Dimensions: 190/120/H110mm -Weight: 2.3 kg

to turn the cans by 180° for example before and after the pasteurizer/can warmer/can coding suitable for all can types: Standard, Sleek, Slim

Battery charging station, compressed air breathing apparatus -Cabinet made of: Battery charging station for Adflo system -Item No.: 833706 -Charging station: for 6 battery chargers (without charger) -Connection: 16 A / 250 V -Output: 16A / 250V / max 4000W -Dimensions: 485/200/H310 mm -Weight: 6.3 kg

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

complete 230kW

EPSM / Biological Safety Station ESCO AIRSTREAM PLUS (AC2-5E8-TU) 1.5m New equipment in its original packaging Complete package including: PSM ESCO Airstrem plus class II AC2-5E8-TU with a length of 150cm (1.5m) A UV-30A UV lamp A fixed stand with levelling feet Height: 71cm SAL-5A0 GEN2 2 internal sockets TüV NORD EN 12469 certified model Automatic regulation and malfunction alarm and dry contact for alarm reporting Economical dual motors ensure permanent and stable flow control Removable stainless steel worktop, with a large work surface and inclined undermount for liquid retention LED lighting Control panel with clear flow display, glass position Quiet operation The PSM are equipped with 2 electrical outlets and a UV lamp Depth without armrest: 767 mm / with armrest: 823 mm Motorized front window, stops at working position External stainless steel arm rest on  ...

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

Jungheinrich charging station for industrial trucks Industrial Charging Station, Battery Maintenance Stand If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has three charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Length: 4.15 m Width:  ...

We offer a Liebherr G944 for sale.

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne

Jungheinrich charging station for industrial trucks 2 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has two charging bays with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufacture: ...

Rademaker Bestreungslinie Stainless steel cladding Stainless steel band analog control can be controlled together or individually 269 operating hours Dimensions individually: 1st table: 92x110x120cm W/D/H 2nd table: 92x107x110cm W/D/H

0: 2750 mm Working height: 2500 mm 0: 300-1000 mm RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up window with applied (closed) turning device Equipment demonstration machine, alternative/optional equipment on request! Pos. 1.0: Item no.: 1000000 RU-SW3-90° vertical work table for Wooden window with ...

Jungheinrich charging station for industrial trucks 4 x charging station, maintenance stand for battery maintenance If you use electric industrial trucks in your business, they rely on accumulators or batteries as an energy source. With the installation of a battery charging station, you benefit from a compact solution that significantly simplifies the charging of batteries. The system serves as a charging station for industrial trucks (such as forklifts). It has four charging stations with Tecna spring balancers that hold the charging cables in place. Construction: The yellow steel structure includes a metal frame with integrated ram protection on the ground to protect the system from damage by vehicles. Spring balancers are mounted at the top, which enable ergonomic handling of heavy cables. Jungheinrich battery charging station for ground mounting Year of manufac ...

1 of used Kisters filmstation for potential use as training module. Ex a Kisters 197/100 D. Can be supplied with ancillaries such as vacuum fan, film-reel spindle and film brake, etc. Modules for various KHS/Kisters/ZVT machine types in stock!

Diesel tank system - company filling station - consisting of: 1 x Storage container, 10.000 liter capacity, used 1 x fuel pump, type Eco 75, brand new Description container: according to DIN 6616-D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome cover, is used, emptied inside and professionally cleaned and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is reprimed and painted on the outside. (RAL sound). L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex wo ...

General Description Complete robotic MIG/MAG welding cell integrated by VARSTROJ d.d. and equipped with an OTC Daihen FD-B4L six-axis robot. The system includes a twin-station positioner, VARSTROJ VPS 4000 DIGIT welding power source, torch cleaning station, robot controller, safety enclosure and operator station for automated welding production. Technical Details Integrator: VARSTROJ d.d. (Slovenia) Robot: OTC Daihen FD-B4L (6 axes) System model: FD-B4L-2DM/1G/MIG Year: 2013 System No.: 1026312 Welding process: MIG/MAG Power source: VARSTROJ VPS 4000 DIGIT (400 A @ 50%) Positioner: HZP300/EO / P250 NV Power supply: 3 × 400 V / 50 Hz Connected load: 50 kVA Compressed air: 6 bar Torch cleaning station: J. Thielmann TFC-4000/DE Condition Good used industrial condition. Complete robotic welding cell with robot arm, welding power source, positioner, torch cleaner, safety ...

Mobile plasticizer for pressing processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulic PN: 150 bar Pn: 16.5 kW P Heating:8 kW 400 V Single STW 150/1-3-10-K Temperature control unit 3.9 kVA Heating capacity 3 kW 380 V Hydraulic pump Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines