berg und schmid used for sale

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

5 elevators galvanized or painted, length from 8 to 24 meters, capacity 80 t/h to 200 t/h Tel. 01715213204

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 8.2 m -Connector: 2-pin -Transport dimensions: 380/380/H90 mm -Weight: 3.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 4 m -Connector: 4-pin -Transport dimensions: 320/320/H80 mm -Weight: 2.3 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 3.8 m -Connector: 2-pin -Transport dimensions: 300/300/H90 mm -Weight: 1.8 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 8.3 m -Connector: 4-pin -Transport dimensions: 340/340/H120 mm -Weight: 3.6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Gas-cooled -Length: 7.7 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.7 kg

9482023 Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler features a durable, electronically controlled, water-cooled moving grate, designed to burn a wide range of fuels from wood pellets to wood chips and waste wood. Installed in 2012, the plant operated on wood pellets until December 2022. It is a complete system in good condition, housed in a concrete-element building, with two large pellet silos and a hot water accumulator tank for heat load balancing. These auxiliary components are optionally available to interested buyers. The boiler is equipped with load-controlled primary and secondary combustion air fans, as well as a speed-controlled exhaust gas fan, ensuring high combustion efficiency and low electrical power consumption. The two-stage combustion design minimizes NOx emissions. Its robust triple-layered ceramic and steel combustion ...

2 pieces of grain receiving with trough chain conveyor 150t/h, length 18 meters x 3 meters, 54 gratings drivable 20 tons. Wheel pressure. Tel. 01715213204

Spreading trailer Schmidt pre-wetted salt, up to 24 m spreading width Trailer with Aebi-Schmidt "Stratos" spreader body, solids and brine tanks. Contents: grit 5 m³, liquids, e.g. brine: 5,200 ltr. Spreading width: 6-24 m in increments of 1 m Propulsion: Diesel engine Hatz 3M41 Operating control by remote control including remote engine start/stop and engine monitoring. Curb weight 6,500 kg, gross vehicle weight 20,000 kg, tyres 425/65R22.5 164J, Nato towing eye 76 mm! Built in 2002. Hardly used, min. corrosion, accident-free. Operating manuals with spare parts lists completely available. More winter service equipment in stock - see sample photos! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal,  ...

turning diameter: 400 mm slide adjustment: 62 mm tool adaptor: MK 4 tool taper: Ø 18 mm weight: 8,0 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A hydraulic lifting table Schmidler with a clamping unit for the woodworking industry is available. Machine dimensions X/Y/Z: approx. 12000mm/2550mm/3400mm. Documentation available. An on-site inspection is possible.

The very well-preserved plate apparatus from the manufacturer Schmidt-Bretten GmbH, which can be seen in the pictures, is being sold. The plate cooler is completely stainless steel. Specifications: Manufacturer: W. Schmidt-Bretten GmbH Year: 1994 For more technical data, see nameplate. Milk pipe connections see pictures.

Manufacturer: Schmidt, Type: UTSK, Year: 1995, Heating power in kW: 850, Fuel type: Späne, Flue gas fan: yes, Heating medium water: Warmwasser, Expansion vessel incl.: yes, Boiler system can be separated for transportation: ein, Year :1995

Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3,000 /-40/+130 Temp. range: -40°C to +130°C Program controller: Stange SE - 502 Mains voltage: 400 V Rated current: 32 A Refrigerant: R 404 A / R 23 Year of Make: 2005 External dimensions: W 1600 x D 800 x H 2430 mm TK-16 More items - new and used - can be found in our shop! International shipping costs on request!

centre height: 250 mm total power requirement: 0 kW weight of the machine ca.: 0,250 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic toggle press, pneumatic press SCHMIDT type 34-12Fabr. No. 400160-03 Serial No. 0028 Year of manufacture 2008Compressive force 28 kN = 2.8 ton. Throat depth 130 mmPlunger area 63 x 36 mmPlunger stroke 12 mmPin hole 20 mm with clamping screwCompressed air requirement 2 to 6 bar- Stroke length infinitely variable via adjustable fixed stop for the upper end of stroke position- Fine adjustment for lower end of stroke position with scale 1 tick = 0.05 mm- Stroke triggered via pneumatic valve, triggered by material insertion- Press stand 45 off

Manufacturer: Perfecta Schmid Model: DUPLOMAT 86 N ELTRON III Power Requirements: 3 x 380 V, 50 Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...

Manufacturer: Schmid Model: 25 Year of Manufacture: 2011 Description: Pass Through spray cleaner Accessories :Switch Cabinet. Media Cabinet Condition : Very Good Voltage: 400 V Frequency: 50 Hz Exterior Dimensions - Width 196.850 in (500.0 cm) - Depth 59.055 in (150.0 cm) - Height 250.000 in (635.0 cm) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: SCHMID Model: PremiumLine Year of Manufacture: 2010 Power Requirements : 380 V 93.0 A 50 Hz 3 Phase Exterior Dimensions : - Width 11,500.000 in (29,210.0 cm) - Depth 184.000 in (467.4 cm) - Height 151.000 in (383.5 cm) Accessories: Various spare parts: pumps, brackets, angle pieces for piping, pipes, screws, washers, sensory Complete SCHMID DES-PremiumLine etching system, available from inlet to outlet. The system consists of 14 individual modules, including piping, wastewater buffer tanks, pumps, valves, sensors, control cabinet, PC, and spare parts. The configuration includes two wastewater buffers, one dedicated to the development and stripping modules, and another for the etching modules. Fully equipped and designed for high-precision PCB or semiconductor processing applications. Find more here - .ucymachines/ Contact us at - sales@ucymachines

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

A complete slitting line Burghardt & Schmidt including a Grindingmaster is available. Uncoiler load capacity: 3000kg, expansion range: 375mm-420mm, knife inner/outer diameter: 80mm/180mm, separator disc dimensions X/Y/Z: 130mm/80mm/1.5mm, recoiler load capacity: 2500kg, usable width: 250mm, cutting performance: 0.1/0.3/0.5/0.8, cuts: 25/20/12/25, material strength: 1800N/m². System dimensions X/Y/Z: approx. 11000mm/5600mm/2000mm, weight: approx. 8000kg. Dokumentation vorhanden. An on-site inspection is possible.

: 200 mm mechanical: ja weight: 1,5 t : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine.

General SKU390X1040 MakeAPI Schmidt-Bretten LocationBarneveld CEcheck TypeSigmawig ST30 TDL Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface7.6 m2 Size length995 mm Sizes width450 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface7.6 Capacity15,8 + 16,6 l. Number of platens24 Plate sizes450 x 995 mm ConnectionsDN100 Max. temperature5 / 250 °C MaterialStainless steel 1.4404 (316L) General No.PW-00520 Year of construction2014 Floorspace0,55x0,65 m Total height1,20 m Weight800 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairy ...

General SKU390X1021 MakeSchmidt LocationBarneveld CEcheck TypeSigmawig ST 12 VDN Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Size length348.5 mm Sizes width197.5 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface8,7 m2 Capacity8,912 l. Number of platens64 Plate sizes197,5x348,5 mm ConnectionsDN50 Max. temperature20-180°C MaterialStainless steel 1.4404 (316L) General No.08V000422 Year of construction2008 Floorspace0,213x0,40 m Total height0,770 m Weight161 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal f ...

General SKU390X1007 MakeSchmidt-Bretten GmbH TypeST12-PF-03884 No.17V007820 Year of construction2017 Mounted on framecheck Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Size length1035 mm Sizes width335 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface8.7 m2 Capacity8,91/8,64 l. Number of platens64 ConnectionsDN50 Max. temperature250°C MaterialStainless steel 1.4404 (316L) General LocationBarneveld Floorspace0,335x0,686 m Total height1.035 m Weight332 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnima ...

CONTROLS   electronic controls SCHMIDT PRESS FORCES   total force (nominal): 0.25 to PRESS TABLE   table surface (left-right): 180 mm   table surface (front-back): 150 mm SLIDE   slide force: 0.25 to   stroke: 100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 35 kg This is an assembly press with force-displacement monitoring. • Operating hours: approx. 150 • Condition: very good, almost like new • Features: Press force monitoring, two-hand operation • Stroke: 100 mm • Tool dimensions: 150 x 100 mm • Press force: 0.25 tons

General SKU390X1003 MakeAPI Schmidt-Bretten TypeSigmawig ST12-PF 1148 No.08V000423 Year of construction2008 LocationBarneveld Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface8.7 m2 Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface8.7 m2 Capacity8,45 / 8,71 l. Number of platens64 ConnectionsDN50 Max. temperature0°C/+200°C MaterialStainless steel 1.4404 General Floorspace0,35x0,35 m Total height0,70 m Weight160 kg CEcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeverages ...

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Lifting table, lifting platform, lifting platform, car lifting platform, scissor lifting platform, cleaning bridge, scissor bridge, lifting device, material lifter, lifting device -Manufacturer: Schmidt Handling, lifting device -Load capacity: 100 kg -Lifting height: 725 mm -Platform: 545 x 285 mm, tiltable -Dimension: 400/380 / H1260 mm -Weight: 205 kg

General SKU390X1039 MakeSchmidt-Bretten GmbH LocationBarneveld CEcheck TypeST12-PF 2654 Pressure Working pressure25 Bar Main Features MaterialStainless steel Size length650 mm Sizes width300 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Capacity2,06 / 2,33 Ltr. Plate sizes300x600 mm ConnectionsDN50 Max. temperature5 / 250 °C MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General No.07V002072 Year of construction2007 Floorspace0,36 x 0,25 m Total height0,80 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfe ...

Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper blade, condition as shown in photos (one is missing) -Sign height: approx. 1100 mm -Conversion to three-point linkage for tractors or forklift pockets for forklifts and wheel loaders is possible for an additional charge. -Transport dimensions: 3200/1200/H1200 mm -Weight: 870 kg

Wedge snow plow, snow plug, dozer blade, dozer blade, snow blade -Plow: hydraulically adjustable -Working width: max. 3200 mm -with: plastic scraper condition see photos -Sign height: approx. 1100 mm -A conversion to a three-point attachment for tractors or drive-in pockets for forklifts and wheel loaders is possible for an additional charge -Transport dimensions: 3300/1400/H1570 mm -Weight: 905 kg

General SKU390X997 LocationBarneveld CEcheck MakeTenez / Schmidt Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.3 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,3 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 With jacketcheck General TypeSigmawig ST12-PF-03882 No.12V002702 Floorspace0,34 x 0,45 m Total height0,78 m Weight250 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants &  ...

General SKU390X1056 LocationBarneveld CEcheck MakeTenez/ Schmidt TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 (316L) With jacketcheck General No.17V007270 Year of construction2017 Floorspace0,335x0,45 m Total height0,79 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmetics ...

General SKU390X1048 MakeTenez / Schmidt LocationBarneveld CEcheck TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 With jacketcheck General No.10V000138 Year of construction2010 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubrican ...

Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller conveyor, roller curve conveyor -Manufacturer: Schmid Fördertechnik, roller curve conveyor 90° with drive -Case: stainless steel -Rolls: Ø 55-85 x 500 mm -Speed: 15 m/min -Drive: SEW-Eurodrive, see photo nameplate -Conveyor width: approx. 500 mm -Transport dimensions: 2000/1200/H830 mm -Weight: 141 kg with pallet

General SKU390X1043 LocationBarneveld MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 With jacketcheck General No.12V002703 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleo ...

General SKU390X1030 LocationBarneveld CEcheck MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface16.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface16,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 With jacketcheck General No.12V002703 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubric ...

General SKU390X1026 LocationBarneveld CEcheck MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 (316L) With jacketcheck General No.12V002704 Year of construction2012 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarL ...

General SKU390X1027 LocationBarneveld MakeTenez / Schmidt TypeSigmawig ST12-PF-03882 Pressure Working pressure25 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface5.5 m2 Size length580 mm Sizes width230 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface5,5 m² Capacity5,52 Ltr. Plate sizes230 x 580 mm ConnectionsDN50/DN40 Max. temperature0 / 250°C Capacity35 m³/h MaterialStainless steel 1.4404 With jacketcheck General No.10V000139 Year of construction2010 Floorspace0,34 x 0,45 m Total height0,78 m Weight100 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additives ...

General SKU212T141 MakeSchmidt Bretten TypeSigma 65M SAL No.61/56709/06 Year of construction1991 Mounted on framecheck Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface40 m2 Sizes width485 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface40 m² CapacityRoom 1: 128 Ltr., Room 2: 128 Ltr. Number of platens100 Plate sizes485x1650x4 mm Connectionsdia. 109 mm Max. temperature50 °C MaterialStainless steel 1.4306 (304L) General LocationBarneveld Floorspace1,2x0,8 m Total height1,95 m Weight1450 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersPlate heat exchangersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants ...