berg und schmid used for sale

thread dia.: 1/4 bis 3 / 75 mm threading length: ? mm thread pitch: ? mm turning speeds: 33 U/min total power requirement: 1 kW voltage: 230 V weight of the machine ca.: 0,074 t dimensions of the machine ca.: 1,20,81 m 2 Die heads,4 sets of cutting dies,Pipe cutter, Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 305 mm capacity 90 degrees: flat: 350 x 200 mm capacity 45 degrees: round: 250 mm capacity 45 degrees: flat: 230 x 200 mm capacity 60 degrees: round: 175 mm capacity 60 degrees: flat: 170 x 100 mm cutting speed: 18 - 110 m/min vice: max. 350 mm dimensions of saw-band: 3370 x 27 x 0.9 mm engine output: 1.5 / 1.8 kW weight of the machine ca.: 880 kg range L-W-H: 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic . pressure cut-off when idling - Stationary base frame with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF) The data for  ...

cutting diameter: 305 mm saw band length: 3375 mm cutting width: 350 mm dimensions of saw-band: 3375 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,5 x 1,8 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: Berg & Schmidt, double miter band saw with roller conveyor left/right -Type: GBS 250 Super AutoCut 2-stage -Drive: 1.7 kW -Miter cuts: 60° left and 45° right -Cutting capacity 90°: Round 255mm, Square 230mm, Rectangle 300x180mm -Cutting capacity 45° left: Round 210mm, Square 190mm, Rectangle 200x160mm -Cutting capacity 60° left: Round 135mm, Square 110mm, Rectangle 130x100mm -Cutting capacity 45° right: Round 180mm, Square 176mm, Rectangle 180x100mm -Saw band speed: 37/74 m/min -Band saw: 2765 x 27 x 0.9 mm -Coolant system: CoolmaticPlus micro-spray system -Quick-release clamping device: adjustable in T-slot for quick position changes -Roller conveyor: 2370/360/H960 mm / 3120/325/H960 ...

cutting diameter: 305 mm saw band length: 3370 mm cutting width: 350 mm dimensions of saw-band: 3370 x 27 x 0,9 mm : 305 mm : 260 mm : 350 x 200 mm : 250 mm : 230 mm : 230 x 200 mm : 175 mm : 155 mm : 170 x 100 mm total power requirement: 1,5 / 1,8 kW weight of the machine ca.: 600 kg dimensions of the machine ca.: 1700 x 1500 x 1950 mm Features: - Semi-automatic operation via automatic saw frame lowering - Miters: left 60°, right 45° - 2 speeds: 40 and 80 m/min - Solid material support table - Operatorâs manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: Ø 255 mm capacity 90 degrees: square: 230 mm capacity 90 degrees: flat: 300 x 180 mm dimensions of saw-band: 2765 x 27 x 0,9 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm cutting speed: 18- 110 m/min power requirement: 1,5/ 1,8 kW dimensions: 1,7 x 1,95 x 1,83 m weight of the machine ca.: 0,8 t full automatic one side miter bandsaw NC- controlled - miter cut left 45° full automatic mode - miter cut left 60 half automatic mode - CNC- controll for 10 saw programms and 99 subroutine - automatic lenght movement with ballscrew - roller conveyor feed side - stepless cutting speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200 x 88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,4 t dimensions: 1,2 x 0,9 x 1,5 m Display machine - Never used - 45° left/right miter - Head tilts up to 45° for bevel cuts (compound cuts) - Pneumatic dual quick-clamping system - Includes micro-spray system - Includes carbide saw blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylinder head, Bergen BRM Lower OD 430 mm, upper OD 420 mm Draw. no. 528/15-1 Reconditioned Part no: 403690 Part no: 528/15-1

Piston Bergen B Gudgeon pin Ø145 mm RR No. 702513

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

TO WHOM IT MAY CONCERN WE VE 3 PCS BERGEN KRG-9 COMPLETE ENGINES AT OUR STOCK. ENGINES HAS BEEN REBUILT ON 2006. ENGINES PRESENT CRANK SHAFTS HAS STANDARTS SIZE CLASS HARD STAMP ON IT. ENGINES MAINTENED WELL. ENGINES ARE TURNING W?TH GOOD SUCT?ON ALL ENGINES READY TO TRANSPORT TYPE KRG-9 ENGINE NO 3186-3187-3188 BUILT YEAR 1986/REBUILT 2006 KW 1825 SPEED 750 MADE IN NORWAY ENGINES TURBO CHARGERS ARE ABB VTR 254-P11 IF YOU VE ANY FURTHER QUEST?ONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST Regards; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Manufacturer: BERGER Type: KL-29 Power supply: 230 V / 50 Hz Silvana 4 x 20 W = 80 W Electrical insect gear / insect killer BERGER type KL-29 (2 pieces) Ask for an offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Bia�a USt-IdNr.: PL547-17-47-669 ABC.inter-wiba.com.pl Info@inter-WIBA.com.pl Tel. 0048 33 8125860

Spreader pad width 1810 mm ex miner dung-and compost spreaders M 92 SG,. with 2 scatter shaft diameter approx. 520 mm. used part, bearing i.O. More parts available. -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Manufacturer: Übergangstreppe, FREETEXT1: Gesamtlänge ca.4 Meter, FREETEXT2: Überganghöhe ca 1,6 Meter, FREETEXT3: seitliches Geländer,

Manufacturer: Berges Umrichter , Type: ACM-D2 11,0kw, Serial number: I 95072401, mH/Hz: 0-50 Hz/380 Volt,

1998 model 2725 bhp 2005 kw Exwork delivery Aliaga/Turkey caglar@dortelgemi

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

With Electrical motor

Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...

Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...

Servomotor, 230V, 12000 rpm, 0,55KW, SER366/3L3SS0CO, Berger Lahr, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - Berger Lahr is now Schneider Electric, - shaft D9mm, centering d50mm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Berges Electronic ACM-D2 3.0 KW

Bergen L 32:40 P cylinder head covers complete. 6 pieces available also available all other major parts like: connecting rods, pistons, crank shaft, turbo charger, camshaft piece , fuel pumps etc. In our stock in Istanbul Turkey Please contact us at: info@fin-marine

Chip motor for wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks, power chucks hydraulic motor electric clamps -Berg: clamping technology chip motor type FSP 140 U -Shaft: M22 x 1.5 -Dimensions: Ø 140/490 mm -Weight: 24.5 kg

Rolls Royce Bergen B32:40 L6P engines for sale in our stock in Istanbul Turkey Bergen B32:40 L6P complete engine with turbo charger In our stock in Istanbul 3 pieces available year: 2002 3000 kw 750 RPM in good condition please contact : info@fin-marine.com

TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE CYLINDER LINERS OF BERGEN B 32:40 A AT OUR STOCK PART NO IS 102001 WE VE 2 PCS AT OUR STOCK. EX STOCK IZMIR TURKEY ADDITIONALLY WE VE MANY MANY OTHER MAJOR PARTS OF THIS TYPE ENGINE BERGEN B 32:40 A AT OUR STOCK PLS REFER LIST ON ATACHE IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ;

Dear's Sale, used 2 diesel engine Ulstein Bergen BVM-12 Brgds Hakan KUSCU +905323642509

Cold room stainless steel inside and outside, 3-part, quick assembly fasteners, dimensions approx. L=3m, W=1.1m, H=2.2m, including cooling unit (is extra installed), condition good, was in operation until the last

Three-jaw chucks, three-jaw lathe chucks, power chucks -Chuck size: Ø 250 mm -Short taper mount for: bayonet mount, taper size 8 -Weight: 41 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WD5-008.151-00 -Quantity: 2x controllers available -Price per piece -Dimensions: 310/60/H180 mm -Weight: 2.5 kg/pc.

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Power resistor, wire potentiometer, resistor, braking resistor, tube fixed resistor -Manufacturer: Frizlen, power resistor type RZM20-1K/4.7K -Synchronous motor: Berger Lahr RSM 47/8 -Voltage: 220V 50Hz 375 rpm -Dimensions: 220/110/95 mm -Weight: 0.9 kg

Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg

Variator pulley, Vario adjustment pulley, Vario pulley, PIV gearbox, Vario gearbox, variable speed pulley, variable pulley, expansion pulley, V-belt pulley adjustable -Manufacturer: Berges, Vario pulley -Type: 280 -Outer pulley diameter: 295 mm -Hole: Ø38 x 160 mm -Dimensions: Ø295 x 170 mm -Weight: 7.8 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tires 2 pieces -Tire size: 250-15 RIM 7.00F-15 -Bolt circle: Ø 225 x 28 mm -Recess: Ø 175 mm -Price/Delivery: complete -Dimensions each: Ø 700 x 215 mm -Weight: 90 kg/piece

three-jaw chuck, three-jaw lathe chuck -Manufacturer: Bergmans, three-jaw chuck type 4110 chuck size Ø 255 mm -Passage: Ø 65 mm -Bolt circle: Ø 140 mm / M12 -Dimensions: Ø 255 x 140 mm -Weight: 31 kg

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tire with rim -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Quantity: 1x tire available -Dimensions: Ø 430 x 160 mm -Weight: 30 kg

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100/21 Machine no.: 1286.1541.1324 Year of construction: 12/1986 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1210 x 1605 x 2200 mm Weight : 780 kg Bale volume: 1m³ Machine weight: 730 kg

Tires, solid rubber tires, forklift tires, complete wheel -Manufacturer: Bergougnan, solid rubber tires with rim 2 pieces -Tire size: 18x7-8 -Bolt circle: Ø 145 x 18 mm -Recess: Ø 110 mm -Shipping/Price: complete -Dimensions: Ø 400 x 160 mm -Weight: 24 kg/piece

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 09-BE001521-05 Year of construction: 10/2005 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 pmax: 100 bar Drive power: 2.2 kW, 85.1 A Dimensions: 1210 x 1605 x 2200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100 Machine No.: 08-BE003665-07 Year of construction: 08/2007 System: Rotating Waste Compactor The packing station captures, shreds and compacts the material to be filled by means of a specially fitted steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Weight : 860 kg Bale volume: 1m³

Packstation / Roller Compactor Manufacturer: Bergmann Type: PS 8100-? Machine No.: unknown Year of manufacture: unknown System: Rotating Waste Compactor The packing station captures, tears and compacts the product to be filled by means of a specially equipped steel roller. Compression ratio: 9 : 1 Drive power: 2.2 kW Dimensions: 1,210 x 1,605 x 2,200 mm Bale volume: 1m³ Weight: approx. 750 kg

Roller compactor, miner - used - : Price from location: only 950.-€ (net) Manufacturer: Bergmann Type: PS 8100E Year of Make: 1990 Serial number: 05 3658 2845/90 Press pressure: to Net weight: 750kg 400V, 5.5kW, Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, crushing and compaction of the waste, reducing its volume by up to nine times. Continuous filling: The machine allows continuous filling by all users. The feed chute can also be left open during the work process, which facilitates and accelerates waste compaction.

Size: 530 mm

approx. 554 pieces of shelves for shelving / Berger, type Bert, 1m and 1.30m x 0.50m, 150kg, various - used - : Price per shelf: 9.-€ (net)! Minimum order: 50 pieces Manufacturer: Regalwerk / Berger Type: Bert Year of construction: approx. 2019 Depth: 49cm = Field depth: 50cm Width: approx. 1.28m (bay width 1.30m) = 434 pieces Width 1m = approx. 120 pieces Height: approx. 4cm Load capacity: 150kg Per pallet approx. 100 - 120 pieces Condition: good Available: now Location. Frankenberg / Saxony

Berger Lahr Servomotor IFS93/2DP0-DS/3DI-I54/O-001RPP41 4.5Nm 36VDC Imax 5A 14mm shaft. If desired, I can also pull the belt drive from the shaft.

Pressure silo 29 m³ volume, payload 46 to, dead weight 3000 kg Diameter 2500 mm, height 8600 mm Spout height 1250 mm / 900 Ball valve DN 65 Inspection Cover NW 500 Blow-in line, vent line