bending wire used for sale

The electric wire rope hoist can lift up to 300 kg Auction-ID: A7-50799-44

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-50798-65

Key data: 400 mm, 300 mm, 220 mm

Manufacturer: SODICK Model No.: VL 400Q Year: 2020 Condition: Used Stock number: 9621 Max. travel length of the X-axis: 400 mm Max. travel length of the Y-axis: 300 mm Max. travel length of the Z-axis: 220 mm Feed length in U-axis (+-): 80 mm Feed length in the V-axis (+-): 80 mm Maximum wire gauge: 0.1 -0.3 mm Tank dimensions: 860 x 690 mm Machine height: 2020 mm Machine length: 1990 mm Machine width: 2310 mm Machine weight: 2750 kg

Charmilles Robofil 510 Wire EDM & Eroding Machine Type: Wire EDM and eroding machine Manufacturer: Charmilles Model: Robofil 510 Year of manufacture: 1995 Workpiece weight max.: 300 kg Electric connection: 380 V Approx. machine weight: 3350 kg Table dimensions: approx. 700 x 500 mm Maximum workpiece height: approx. 310 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-68

Specifications: Engine: 6-cylinder \"Deutz\" diesel engine Transmission: Hydrostatic Maximum driving speed: approx. 40 km/h Superstructure: Duport Tank capacity: approx. 6 m³ Tank Material: Plastic Working width: approx. 12 meters Number of sections: 5 Tyre size: 710/60 R38 Number of wire wheels: 48 Hours: approx. 14,942 hours Drive: 4x4 Steering: 4-wheel steering Features: Duport superstructure Double piping system Autopilot Automatic section closure via ISOBUS Variable output control via ISOBUS New ISOBUS installation Fine dust filter per section Double filling pump Variably adjustable oil pressure of discharge pump for pot pressure control Pressure gauge per section Lifting for ground pressure control Track gauge adjustment Air suspension Front weight set, approx. 1,200 kg Automatic lubrication Recently renewed/fitted: Discharge pump Section C ...

Batch of Betafence chicken wire green / galvanized – 154 rolls Specifications: Brand: Betafence Product: Chicken wire Number of rolls: 154 pieces Version: Green and galvanized Mesh sizes: 13 mm, 25 mm and 40 mm Heights: 50 cm and 100 cm Roll lengths: 10 meters and 25 meters Total length: 2,140 meters Features: 54 rolls of 13 mm galvanized – 100 cm high x 10 meters 15 rolls of 25 mm galvanized – 100 cm high x 25 meters 13 rolls of 13 mm galvanized – 50 cm high x 25 meters 12 rolls 13 mm green – 50 cm high x 25 meters 10 rolls 25 mm green – 100 cm high x 10 meters 50 rolls of 40 mm galvanized – 50 cm high x 10 meters Particularities: Lot consisting of a total of 154 rolls of Betafence chicken wire Total specified length is 2,140 meters Batch consists of green and galvanized versions Different mesh sizes, heights and roll lengths available Suitabl ...

Verathon BladderScan 0570-0193 – Wireless Battery Charger / Hub Manufacturer: Verathon Model: BladderScan 0570-0193 Part Number: 0570-0193; Battery Part Number: 0400-0066 Included: 1 Wireless Battery Charger / Hub, 1 Battery, 1 Power Supply Condition: Like New Auction-ID: A1-51275-184

JRI Spy RF N1 – Wireless Temperature Logger Manufacturer: JRI Model: Spy RF N1 Part Number: 06428 Type: RF Wireless Temperature Data Logger with LCD Display Usage: Cold Chain, Refrigerators/Freezers, Laboratories, Pharmacies Condition: Very Good Condition Auction-ID: A1-51275-166

Spoon length 1020 mm, equipped with display + control system Auction-ID: A1-50597-112

including on a roll; electrodes; Auction-ID: A1-50707-180

wire EDM machine, year 2019, CNC 31i-WB. Used machine. More info & price on IndustrialBuyer.

wire EDM machine, year 2005. Used machine. More info & price on IndustrialBuyer.

Fanuc Tape Cut Model WO CNC Wire EDM Machine Manufacturer: Fanuc Ltd. Model: Tape Cut Model WO Type: A04B-0248-B042 Equipment type: CNC Wire EDM Machine Year: 1991 Serial number: P918W0443 Country of manufacture: Japan CNC wire electrical discharge machining (Wire EDM) machine designed for precision cutting of electrically conductive materials using a continuously fed wire electrode. Technical specifications: X-axis travel: 200 mm Y-axis travel: 350 mm Z-axis travel: 160 mm Connected load: 9 kVA Electrical supply: 200–550 V, 50/60 Hz Equipment / features: Fanuc CNC control Automatic wire-feed system Wire tension/feed equipment Dielectric / flushing system Enclosed machining tank and work area Operator control panel Approx. dimensions (L × W × H): 1,800 × 1,600 × 2,000 mm Approx. weight: 1,800 kg Condition: Used. Main machine, CNC control, ...

Type: A04B-0312-B001#E5. Power: 13 KVA. Auction-ID: A1-51529-18

Type: A04B-0309-B001/E5. Power: 13 KVA. Auction-ID: A1-51529-19

wire EDM machine, year 2006, CNC W30FAS-2. Used machine. More info & price on IndustrialBuyer.

table length: - mm table width: - mm ampere: A total power requirement: kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Including 3 shelves. Dimensions per section: 100x64x200 cm. This lot must be collected by the buyer himself. Auction-ID: A1-51062-395

Auction-ID: A1-51062-48

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

Industrial diamond wire sawing machine manufactured by Pellegrini Meccanica S.p.A., Italy, designed for quarry and natural-stone cutting applications. The TDI 65 Super is a medium-power wire saw with variable wire speed and controlled machine travel, suitable for granite, marble and other dimensional stone cutting. Independent references also identify the TDI 65 Super specifically as a quarry diamond-wire cutting machine. Approx. 2,400 × 1,500 × 1,700 mm (L × W × H), excluding loose rails and accessories. Weight: 1,700 kg. The rails and loose accessories should ideally be measured and listed separately for collection planning. A reference describing this model's quarry equipment configuration specifically mentions 3 m additional rails, Ø385 mm pulley pairs and horizontal-cutting equipment as accessories for a TDI 65 Super Auction-ID: A1-51282-2

AGIE AGIECUT Progress 2 CNC Wire EDM Machine | Year of manufacture 2004 For sale is an AGIE AGIECUT Progress 2 CNC wire EDM machine in industrial design. The machine comes from a production plant and has been professionally dismantled. The AGIECUT Progress series is one of AGIE's proven wire EDM machines and is suitable for tool and mould making, precision manufacturing and general mechanical engineering. Technical data Manufacturer: AGIE Model: AGIECUT Progress 2 Year of Make: 2004 Control: MC Progress Operating voltage: 3 × 400 V Frequency: 50 Hz Connected load: 12.1 kVA Rated current: 17.5 A Machine weight: approx. 2,650 kg Facilities CNC control MC Progress Automatic wire threading AGIE Wire Feeder System Original AGIE Generator Complete dielectric system Original control panel Precision Work Table Complete protective enclosure Condition The machine comes from an industrial co ...

AGIE AGIECUT 150 HSS Wire EDM Machine – Year 1995 For sale is an AGIE AGIECUT 150 HSS CNC wire EDM machine. The machine comes from an industrial company and was taken out of service due to a change in operations. AGIE is one of the most renowned manufacturers of wire EDM machines and stands for the highest precision and reliability. Technical data Manufacturer: AGIE Model: AGIECUT 150 HSS Year of Make: 1995 Control: AGIEMATIC CF 50 SE Generator: AGIEPULS HSS Voltage: 3 × 400 V Frequency: 50 / 60 Hz Operating hours: approx. 69,713 h Travels X: 300 mm Y: 200 mm Z: 250 mm Workpiece Max. workpiece weight: approx. 550 kg Facilities CNC control AGIEMATIC CF 50 SE AGIEPULS HSS Generator Automatic Wire Threading (HSS) Dielectric tank Complete machine bed Control panel Control cabinet Cooling and filtration system Condition The machine is sold as used. It comes from a production hall ...

AGIE AGIECUT Progress 2 CNC Wire EDM Machine | Year of manufacture 2003 For sale is an AGIE AGIECUT Progress 2 CNC wire EDM machine in industrial design. The machine comes from a production plant and was professionally dismantled. AGIE is one of the world's leading manufacturers of wire EDM machines and stands for the highest precision, reliability and process reliability. The AGIECUT Progress series is ideal for tool and mould making, precision parts, stamping tools and general mechanical engineering. Technical data Manufacturer: AGIE Model: AGIECUT Progress 2 Year of Make: 2003 Control: MC Progress Operating voltage: 3 × 400 V Frequency: 50 Hz Connected load: 12.1 kVA Rated current: 17.5 A Machine weight: approx. 2,650 kg Facilities CNC control MC Progress Automatic wire threading Original AGIE Generator Complete dielectric system Automatic wire feeder Wire Coil System Complete ...

Wireless bilirubinometer, never used Condition: new, never used Non-invasive device to monitor jaundice, precision bilirubinometer that determines, transcutaneously, the level of bilirubin, in newborns before, during and after phototherapy One of the specificities of this device is that it is battery-powered, which makes it the bilirubinometer of choice for home visits, ideal device for private midwives, for early discharges after childbirth in order to detect hyperbilirubinemia! Device without problems of battery wear and too long charging time due to the fact that the biliflash works on battery. Bilirubinometer which has an excellent correlation between the blood sample and the measurement of the device. This medical device is a regulated health product that bears the CE mark under this regulation. Auction-ID: A1-51618-498

Wireless bilirubinometer, never used Condition: new, never used Non-invasive device to monitor jaundice, precision bilirubinometer that determines, transcutaneously, the level of bilirubin, in newborns before, during and after phototherapy One of the specificities of this device is that it is battery-powered, which makes it the bilirubinometer of choice for home visits, ideal device for private midwives, for early discharges after childbirth in order to detect hyperbilirubinemia! Device without problems of battery wear and too long charging time due to the fact that the biliflash works on battery. Bilirubinometer which has an excellent correlation between the blood sample and the measurement of the device. This medical device is a regulated health product that bears the CE mark under this regulation. Auction-ID: A1-51618-497

Used ROBINO & GALANDRINO RECORD 10000 wirehooder machineTechnical Specifications & Performance DataThe Robino & Galandrino RECORD 10000 is a wirehooder designed for the application of wire cages on bottles used in sparkling wine and champagne-style beverage production. Built in 2017, this industrial packaging machine supports the final closure stage after cork insertion, securing the cork with a correctly applied wire cage.Manufacturer: Robino & GalandrinoModel: RECORD 10000Machine type: WirehooderYear of manufacture: 2017Electrical supply: 400 V, 3-phaseFrequency: 50 HzCurrent marking: 6 AElectrical diagram: REC377Advanced Automation & Control SystemsThis wirehooding machine is configured for industrial bottle handling and cage application. Its three-phase 400 V electrical supply is suited to integration within an automated bottling and industrial packaging environment. The machine can  ...

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg

Bending tool, die, lower knife, lower tool, lower jaw -Tool: for swivel bending machine -Widthen: for lower cheek -Dimensions: 59 x 19 mm -Length: 1452 mm -Weight: 10 kg

Bending tool, die, upper blade, upper tool, upper jaw, claw bar -Tool for swivel bending machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Bending tool, die, lower knife, lower tool, lower jaw -Bending tool: from Lotze HDZK swivel bending machine -Widthen: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimensions: 2487/100/H30 mm -Total weight: 29.4 kg

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg

Tube bending machine - mandrel bending machine TRACTO-TECHNIK Type Transfluid DB 2060 KSerien. No. 70173 Year of construction 2004Bending capacity (steel) max. 76.1 x 3.0 mmBending capacity (stainless steel) max. 76.1 x 1.65 mmBending tool max. 70 x 2 mm (for stainless steel)Pipe slide length 4572 mm (4300mm)Bending radius max. 150 mmBending direction clockwise (right)Bending angle max. 190Bending head speed at 90 8 sec. Hydraulic operating pressure 200 barEngine power 3 KWnet connection 400 Volt, 50 Hz, 15

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5Hand swivel bending machine, bending benchYear of construction approx. 1985Working length 650 mmSheet thickness at 40 kg/mm2 1.5 mmUpper beam opening approx. 60 mmBending beam adjustment approx. 0-25 mmBending angle 0-180- Upper beam adjustment via hand crank- Pilot rail for the bending brace- One-piece sharp rail 135Space requirement L x W x H 1200 x 600 x 1100 mmWeight 160 kggood condition; used

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145

B50 - Mech. Bending machine/reinforcing steel bending machine New / Unused Year of construction 2026 -Technical data see data sheet Dimensions LxWxH 1.4x1.3x1.5 meters / Weight 500Kg

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder