bending wire used for sale

Manufacturer: Mitsubishi Model: W30FV2-2 Type: Wire EDM machine (Wire erosion) Date of Manufacture: November 2006 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Mitsubishi Model: FX20K Type: Wire EDM machine (Wire erosion) Year of Manufacture: 1999 Workpiece and Table Specifications - Maximum workpiece size (W x D x H): 1,050 x 800 x 295 mm - Maximum workpiece weight: 800 kg - Table dimensions: 780 x 630 mm - Axis travel (X / Y / Z): 500 x 350 x 300 mm - Maximum table feed rate: 1,300 mm/min Wire and Cutting Specifications - Wire diameter: 0.2 to 0.3 mm - Maximum wire feed rate: 250 mm/sec - Wire tension: 2 to 25 N Machine Dimensions and Weight - Overall machine dimensions (W x D x H): 1,810 x 2,310 x 2,050 mm - Machine weight: 2,550 kg Filter System - Tank capacity: 635 litres - Filter flow rate: 30 l/min - Filter fineness: 3 micrometres - Filtration: Paper filter (2 units) - Conductivity control: 0.5 to 100 x 10 ohm/cm - Filter unit dimensions (W x D x H): 800 x 1,700 x 1,720 mm - Filter unit weight (empty): 230 kg Ge ...

Manufacturer: Mitsubishi Model: W30FAS-2 Type: Wire EDM machine (Wire erosion) Year of Manufacture: 2006 Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Wire EDM machine Sodick AQ 537L with few operating hours

working direction: left-right, single head. working direction: left-right electrical power supply kW: 420

This 5-axis Mitsubishi MV2400R wire-cut EDM machine was manufactured in 2017. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm, accommodating workpieces up to 1050 × 820 × 305 mm and weighing up to 1500 kg. If you are looking to get high-quality wire-cutting capabilities, consider the Mitsubishi MV2400R machine we have for sale. Contact us for further details.

A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible.

Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-axis: 350 mm y-axis: 250 mm z-axis: 256 mm U-axis: +/-70 mm V-axis: +/-70 mm dimension of workpiece: 750 x 550 x 256 mm Working hours: 29.559 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -edm hours 29559h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine very well maintained, operating in a clean workshop and used for small-series production. Hard drive recently replaced. Inspection possible.

This 5-axis AGIE Classic 3s wire EDM machine was manufactured in 2002. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. The machine is equipped with a submerged head and includes a chiller, resin filters, and a wire feed/recovery system. If you are looking to get high-quality wire EDM capabilities, consider the AGIE Classic 3s machine we have for sale. Contact us for further details.

Used industrial machine offered by IBEXTRA.

This 5-axis +GF+ AgieCharmilles AGIECUT PROGRESS V4 was manufactured in 2007. It features a maximum workpiece dimension of 1,300 mm x 1,000 mm x 510 mm and can handle a maximum workpiece weight of 3,000 kg. The machine offers impressive axis travels, including X-axis travel of 800 mm and Y-axis travel of 550 mm. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AgieCharmilles AGIECUT PROGRESS V4 machine we have for sale. Contact us for further details.

Used industrial machine offered by IBEXTRA.

This 5-axis Brother HS-70A wire EDM machine was manufactured in 2003. It features a CNC-A50 control, working strokes of 410 x 260 x 170 mm, and can handle workpieces up to 350 kg. The wire diameter ranges from 0.1 to 0.3 mm, supporting precise cutting. If you are looking to get high-quality EDM capabilities, consider the Brother HS-70A machine we have for sale. Contact us for more information about this machine.

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

AGIE AGIECUT PROGRESS 2 Wire EDM machine Workpiece height: approx. 250 mm Workpiece weight: approx. 400–500 kg Table size: approx. 600 x 400 mm Supply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA. Wire EDM technology, automatic wire feed, hydraulic systems, robust construction. Control panel, emergency stop, sensor monitoring.

wire EDM machine, year 2006, CNC W30FAS-2. Used machine in good condition. More info & price on IndustrialBuyer.

EDM machine Sodick AQ 327L BJ 2006 EDM machine Sodick AG 60L BJ 2020

wire diameter 3,1-5,2 mm nail length 13-150 mm capacity - pieces/min 370

diameter range 3,8-6 mm nail length 25-200 mm output - pieces/min 200

diameter range 3,1 - 5,2 mm nail length 13 - 150 mm output - pieces/min 370

diameter range 2,2-3,8 mm nail length 13-110 mm output - pieces/min 350

wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

Key data: 320 mm, 220 mm, 255 mm

Inv. Num. : 9242 Type: Alpha-0iC Producer: FANUC Created: 2005 Parameters: Control System: FANUC Series 180-is-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (-): 120 mm Feed length in the V-axis (-): 120 mm Max. workpiece weight: 500 kg Machine weight: 1200 kg

3:1 Wire punching and locking system, Stamping tool 3:1, round hole 4 mm, Working width up to 420 mm, Max. stamping capacity per the manufacturer: 30 sheets/80 g/m², foot switch, operation manual, A small palette with 3:1 wire-binding elements is included in the delivery.

with assembly device for head plates wire diameter 2,2-3,8 mm nail length 13-110 mm capacity - pieces/min 350

diameter range 2.8-4.2 mm nail length 60-103 mm output - pieces/min 950

diameter range 2,2-4,2 mm nail length 13-105 mm output - pieces/min 430

wire diameter 2,2-4,2 mm nail length 13-105 mm capacity - pieces/min 430

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

diameter range 2,0-4,0 mm nail length 50-100 mm output - pieces/min 800

diameter range 1,8-3,4 mm nail length 13-80 mm output - pieces/min 550

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

wire diameter 1,8-3,1 mm nail length 10-75 mm output - pieces/min 420

diameter range 1,8-3,4 mm nail length 10-80 mm output - pieces/min 550

diameter range 2,1-3,1mm nail length 32-51mm output - pieces/min 1600

diameter range 1,8-2,5 mm nail length 32-57 mm output - pieces/min 2000

diameter range 1,0-2,4 mm nail length 10-50 mm output - pieces/min 700

diameter range 1-2,2 mm nail length 10-50 mm output - pieces/min 520

diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

line wire diameter 1,6-2,8 mm point wire diamter 1,4-2,5 mm output - meter/min 25-38

straight through inlet wire diameter 2,5 mm finished wire diamter 0,8 mm number of drafts 8 diameter of capstan 400 mm speed -meters/sek 15 m

We are offering for sale a complete cable assembly line composed of the following equiptment: - Komax Alpha 433 L Fully Automatic - Komax ADS 123 Wire Storage - Safety Enclosure - Extraction System (AAT 260) - Operating Computer and Control - Various Crimping and Processing Modules - Further Accessories Available Upon Request Condition : Fully Functional Year - in between 2008 - 2012 Find more here - .ucymachines/ Contact us at - sales@ucymachines

wire dia.: 5 - 17 mm wire length: max. 5.000 mm straightening feed: stufenlos bis ca. 60 m/min : 11 kW, 380 V, 50 Hz : 45 kW, 1480 U/min, 380 V, 50 Hz total wight: ca. 15 t : Typ DZA/20 f. 1000kg Coil Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Mitsubishi MV1200S wire EDM machine was manufactured in 2017. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 220 mm. The machine is equipped with automatic wire threading and the Mitsubishi D-CUBES control system, ensuring efficient and stable production. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200S machine we have for sale. Contact us for further details.

This 5-axis Mitsubishi FA20 wire EDM machine was manufactured in 2004. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine can handle workpieces up to 1050 mm x 800 mm x 295 mm and has a maximum workpiece weight of 1500 kg. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA20 wire EDM machine we have for sale. Contact us for further details.

This 5-axis Sodick AG 600 L wire EDM machine was manufactured in 2011. It features a maximum workpiece size of 800 × 570 × 340 mm and a robust table size of 1,050 × 710 mm. With a wire feed speed of 20 mm/s and a dielectric tank capacity of 800 L, this machine is designed for precision and efficiency. If you are looking to get high-quality wire EDM capabilities, consider the Sodick AG 600 L machine we have for sale. Contact us for further details.