bending wire used for sale

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 3600 x 2000 x 2900 mm weight: 11.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 18 kW weight of the machine ca.: 13.000 kg dimensions: 5080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 330 t chamfer lenght: 4100 mm distance between columns: 3600 mm Control: Cybelec VisiTouch 24 Arm length: 500 mm stroke: 300 mm dayligth: 500 mm : 165 mm/s bending speed: 0 - 10 mm/s total power requirement: 32 kW weight of the machine ca.: 21.000 kg dimensions: 4850 x 2300 x 3520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 185 t chamfer lenght: 4000 mm distance between columns: 4100 mm Control: Cybelec VisiTouch 24MX stroke: 300 mm dayligth: 500 mm : 175 mm/s bending speed: 0-12 mm/s total power requirement: 22 kW weight of the machine ca.: 15.500 kg dimensions: 4970 x 3260 x 2090 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 t chamfer lenght: 2050 mm distance between columns: 1550 mm control: CYBELEC DNC 1200 PS Eco stroke: 550 mm table height: 700 mm throat: 405 mm distance between table / ram: 320-870 mm column arm: 405 mm weight of the machine ca.: 14.000 kg Accessories / equipment: - controlled axes: Y1 - Y2 - X - R - Z1 and Z2 can be moved manually - Lasersafe angle measurement - Pneumatically adjustable support table - pneumatic upper and lower tool clamping - 2-hand foot control - manual crowning The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm Control: CYBELEC ModEva Pac throat: 350 mm distance between table / ram: 430 mm table width: 250 mm stroke: 250 mm total power requirement: 18,5 kW weight of the machine ca.: 16500 kg dimensions of the machine ca.: 4400x2100x3200 mm Equipment/accessories: - Control conversion at the end of 2018 - Electric backgauge 1250 mm - 10-stage die displacement - crowning - EHT 26 mm tool holder - Axes controlled: Y1,Y2,X,R - Sheet metal holding table - 4x manually adjustable stop fingers - pneum. Upper tool clamping - Safety light curtain - 3x height-adjustable support arms - Oil cooler - 2-hand foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm Control: Cybelec weight of the machine ca.: 11.600 kg dimensions of the machine ca.: 4000x2000x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 t chamfer lenght: 4050 mm distance between columns: 3550 mm column arm: 420 mm oil volume: 400 l Control: ModEva 10S weight of the machine ca.: 19700 kg dimensions: 5100 x 2160 x 3420 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 225 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC DNC 86 PS total power requirement: 18,5 kW weight of the machine ca.: 18.000 kg dimensions of the machine ca.: 5180x2400x3200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 230 t chamfer lenght: 3060 mm distance between columns: 2690 mm Stroke: 365 mm Control: DELEM DA 65 throat: 410 mm dayligth: 535 mm dimensions: 3660 x 2310 x 3100 mm machine weight ab.: 17.700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 300 mm stroke of ram: 240 mm quantity of oil: 200 l control: CYBELEC Cybtouch 15 range L-W-H: 4500x2200x3000 mm Equipment/accessories: - manual crowning - 3 x manual stop fingers - die displacement - pneum. upper tool clamping - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 160 mm lower roll diameter: 140 mm side roll diameter: 120 mm total power requirement: 2,2 kW Overall size: 4140x1040x1140 mm weight of the machine ca.: 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4100 mm plate thickness: 35 mm pre-bending: 28 mm upper roll diameter: 540 mm lower roll diameter: 541 mm side roll diameter: 440 mm total power requirement: 37 kW weight of the machine ca.: 48.100 kg Machine dimensions approx.: 7670x3000x2930 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm range L-W-H: 4200x2200x3700 mm weight of the machine ca.: 17.000 kg Equipment: - Control conversion 2023 to CYBELEC VisiTouch Pac - controlled axes: Y1, Y2, X, R, crowning - Hydraulic punch clamping - Hydraulic die clamping - 4-stage pneumatic die displacement The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 3200 mm Control: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 t chamfer lenght: 3100 mm distance between columns: 3600 mm Control: Cybelec CybTouch 15 stroke: 250 mm dayligth: 470 mm : 180 mm/s bending speed: 0-10 mm/s : 165 mm/s total power requirement: 15 kW weight of the machine ca.: 12.500 kg dimensions: 4000 x 2000 x 3030 mm Standard equipment: - Cybelec CybTouch 15 Windows CNC control - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system, model GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Optional equipment: - 2 x front support tables - 2 x stop fingers - Wila Style hydraulic upper die clamping - Wila Style hydraulic die clamping - CE Standard compliance YouTube video links: https://www.youtube.com/watch?v=u3sBJxJ3M8g https://www.youtube.com/watch?v=MmZtAJArHA0 https://www.youtube.com/watch?v=mybVan1S2pk The data for this ad was created with ModulMWS - the software solution of LogoT ...

pressure: 125 t chamfer lenght: 3000 mm distance between columns: 3100 mm Control: Cybelec VisiTouch 24 stroke: 300 mm dayligth: 500 mm : 200 mm/s bending speed: 0-12 mm/s total power requirement: 15 kW weight of the machine ca.: 11.500 kg dimensions: 4080 x 3110 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of ram: 274 mm control: Cybelec ModEva Pac weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 16 mm pre-bending: 13 mm upper roll diameter: 330 mm lower roll diameter: 300 mm side roll diameter: 240 mm Control: total power requirement: 11 kW Overall size: 5600x1650x1900 mm weight of the machine ca.: 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 5 mm pre-bending: 5 mm upper roll diameter: 170 mm min. bending diameter: Ø 255 mm bending speed: 4,5 m/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3800x1100x1130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 210 mm lower roll diameter: 190 mm side roll diameter: 170 mm total power requirement: 7,5 kW Overall size: 5200x1400x1300 mm machine weight ab.: 5.400 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 8 mm pre-bending: 6 mm upper roll diameter: 190 mm lower roll diameter: 170 mm side roll diameter: 150 mm total power requirement: 3 kW weight of the machine ca.: 3.450 kg Machine dimensions approx.: 4040x1380x1255 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 25 mm pre-bending: 20 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 18,5 kW weight of the machine ca.: 17.100 kg Machine dimensions approx.: 5800x2100x2000 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

sheet width: 1050 mm plate thickness: 1,8 mm pre-bending: 1,5 upper roll diameter: 70 mm min. dia.: 105 mm total power requirement: 1,1 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1700x700x1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine: 2,8 KW weight of the machine ca.: 320 kg dimensions of the machine ca.: 86 x 90 x 85 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1550 mm : 2,0 mm : 1,5 mm roll diameter: oben 90 mm : 560 kg : 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4.5 mm pre-bending: 4.0 mm roll length: 1550 mm min. dia.: ca. 190 mm roll diam. toproll: 140 mm bending speed: 3.0 m/min engine output: 2.2 kW weight: 1420 kg range L-W-H: 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller The data for this ad was created with Modul ...

tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional  ...

pressure: 120 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of upper beam: 155 mm throat: 350 mm ajustment speed: 100 mm/sec working feed: 9.0 mm/sec return speed: 77.0 mm/sec Control: P 40 work height max.: 878 mm table width: 104 mm oil volume: 150 l total power requirement: 11.0 kW weight: 7550 kg range L-W-H: 3550 x 2150 x 2600 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=bUaEa_nHZ6E Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit P40 New price approx. 4.000 Euro Control / movement of the backgauge - X axis (target/actual input) Control / movement of the depth setting - Y axes (target/actual input) Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) with 2x manually adjustable stop fingers including l ...

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...

sheet width: 1050 mm plate thickness: 2.0 mm roll length: 1070 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 325 kg range L-W-H: 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60.3 x 4.5 mm ST tube diameter: 60.3 x 5.4 mm ALU tube diameter: 2 x 3.91 mm GAS bar material - diameter: 35.0 mm revolutions per minute: 2.0 U/min bending radius min.: 10.0 mm bending radius max.: 270 mm external diameter: min. 5.0 mm external diameter: min. 1/8 Zoll voltage: 230 V total power requirement: 1.5 kW weight: 76.0 kg range L-W-H: 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model M = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3100 mm dayligth: 370 mm stroke of upper beam: 200 mm throat: 500 mm ajustment speed: 100 mm/sec working feed: 9.0 mm/sec return speed: 86.0 mm/sec work height max.: ca. 900 mm back stop - adjustable: max. 500 mm Control: CYBELEC oil volume: 150 l total power requirement: 15.0 kW weight: 12000 kg range L-W-H: 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition () Includes optional equipment - in checked conditions - machinevideo - https://www.youtube.com/watch?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit Swiveling control panel (front right) Tool & program library Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) With 4x manually adjustable stop fingers (Z- ...

sheet width: 3050 mm plate thickness: 3.0 mm ST pre-bending capacity: 3.0 mm ST upper roll diameter: 170 mm lower roll diameter: 170 mm side roll diameter: 180 mm Control: konv. 0: 380 V total power requirement: 3.0 KW weight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Including digital position display - Manual bottom roll adjustment Via hand crank - Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forkl ...

angular steel - leg outwards: -- mm double T-iron on the x-axis: -- mm U-iron on the x-axis: -- mm : 50 mm : 150 mm throat: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 6,2 t chamfer lenght: 285 mm mm distance between columns: 230 mm dayligth: 215 mm throat: 70 mm stroke: 100 mm working feed: 9,8 mm/sec return speed: 50 mm/sec quantity of oil: 10 l Control: DELEM DA 41T total power requirement: 0,7 kW weight of the machine ca.: 250 kg dimensions: 900 x 1300 x 550 mm Demonstration Machine â?¢ Basic C-frame design â?¢ Compact benchtop model â?¢ Ideal for prototypes and small production runs â?¢ Very short setup time â?¢ Functionally simple â?¢ Wide range of applications â?¢ Low noise level â?¢ Low power consumption â?¢ Easy to operate Includes optional equipment: - DELEM DA 41T CNC control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60.0 t chamfer lenght: 1270 mm distance between columns: 1000 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm back stop - adjustable: 500 mm control: DA 66T oil volume: 150 ltr. voltage: 380 V engine output: 7.5 kW Weight: 4320 kg range L-W-H: 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - https://www.youtube.com/watch?v=KRifrqTgkVU ------------------------------------------------ SPEED BEND PRO CNC press brake: increased installation height increased cylinder stroke and increased bending beam speeds ------------------------------------------------ Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T graphics/touchscreen ...

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATS 585 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control ATS 585 Rear stop positioning (X-axis) Depth adjustment positioning (Y1, Y2 axes) Ability to program various programs Swiveling control panel, front left Tool and program library - NC electric-motor-driven material/backgauge (X-axis) With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER RX safety d ...

pressure: 130 t chamfer lenght: 3060 mm distance between columns: 2690 mm column arm: 410 mm stroke: 365 mm dayligth: 535 mm ajustment speed: 200 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec table width: 120 mm table height: 1050 mm tiltable up to: +/- 10.0 mm Number of working hours: ca. 31.800 h compressed air: 5.0 - 7.0 bar oil volume: 250 l operating pressure: 340 bar voltage: 400 V total power requirement: 23.0 KVA weight of the machine ca.: 12950 kg range L-W-H: 3660 x 2310 x 2900 mm Equipment: - CNC electro-hydraulic folding/die bending press - DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front - CNC axis adjustment: Y1 - Y2 - X - R ax ...

length: 3100 mm height: 120 mm width: 120 mm Brand New Die Block List Price: 9.738 Euro Special Price on Request V-Openings: - 80.0 mm / 85° / R 10.0 with guide rollers - 50.0 mm / 85° / R 5.0 with guide rollers - 35.0 mm / 85° / R 4.0 - 22.0 mm / 85° / R 2.5 - 2x Mounting Screws incl. Link Chain The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 140 x 140 x 13 mm I-beam section - upend: 120 x 120 x 13 mm L-beam: 130 x 130 x 12 mm round bar steel: 85 mm bending capacity - flat iron: 125 25 mm flat steel: 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 4900 € : 109.71 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2023 : 8285 : prompt, Zwischenverkauf v : Türkei : 33900 € : 1 : 30 to : 1050 mm : 3 (Y1, Y2, X) : 160 mm : 850 mm : 250 mm : 390 mm : hydraulisch : 10 mm/s : 130 mm/s : 495 mm : 250 mm/s : 835 mm : 104 mm : 75 l : 7.5 kW : 2470 mm : 1250 mm : 2245 mm : 3250 kg demo machine / mint condition net price (price for new machine € 41.200,00) Y1, Y2, X - 3 Axis Control Unit - DT 10 Touch screen 2D graphic (Remote Control) Back gauge: motorized &, linear guide &, ballscrew European clamping system European clamping system top tool European style bottom tool holder Support arms with T-Slot Safety side covers (Non CE) World known electrical equipments OPTION: DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) € 2.110,- BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transp ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 35400 € : 676.14 € : 3030 mm : 6 mm : 6 mm : 4 mm : 220 mm : 5.5 kW : 4750 mm : 1200 mm : 1150 mm : 4920 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1014.93 € : 2050 mm : 16 mm : 16 mm : 13 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1550 mm : 6100 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 49900 € : 953.09 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 4300 mm : 1600 mm : 1470 mm : 5450 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 60600 € : 1145.34 € : 3100 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1550 mm : 7685 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...