bending wire used for sale

Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard  ...

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-45761-892

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions L x W x H 400 x 290 x 280 mm Weight 35 kg Auction-ID: A7-45761-869

Press brake Amada Astro HDS 1030 / NTR BJ 2010

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 220 C Year of manufacture: 2012 Edge thickness: approx. 0.4 – 6 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 10 – 11 m/min Control: Electronic control panel (Brandt / HOMAG) Infeed: Manual infeed with driven conveyor chain Edge magazine: Rotary edge magazine (visible) Processing units: - Pre-milling unit - Gluing unit (hot-melt) - End trimming unit - Trimming unit - Radius scraping unit - Buffing unit Extraction: Extraction hood with multiple connections Glue system: Hot-melt glue application Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 16 A Full load current: 14 A Control voltage: 24 V Machine number: 0-261-09-2410 Remarks: Compact single-sided edge banding machine for straight edges with standard processing units ...

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 430 C Year of manufacture: 2014 Edge thickness: approx. 0.4 – 8 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 11 m/min Control: Electronic control system (Brandt / HOMAG control) Processing units: Pre-milling, gluing unit, end trimming, trimming, radius scraping, buffing Glue system: Hot-melt glue unit (EVA / optional PU) Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 20 A Full load current: 18.5 A Control voltage: 24 V Machine number: 0-261-04-6048 Remarks: One-sided edge banding machine for processing straight edges with automatic edge feeding and post-processing units; suitable for industrial woodworking applications :contentReference[oaicite:0]{index=0} Approx. own mass: 1700 kg Approx. dimensions (LxWxH): 4800 x 1200 x 1600 ...

sheet thickness: 1.25 mm, 400V power supply, additional stones, left and right rotation, speed ​​control, pressure: 40 kp/mm², machine visually refreshed, ready for operation Auction-ID: A7-45896-1

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

UD = double bending; complete with set of tools; CNC controlled backgauge; hydraulic top clamping Auction-ID: A1-45793-1

including various tools; Extra option profile bending unit Auction-ID: A1-45793-25

Edge banding machine for sale by purchasing new machine. Machine is currently still in use and still fully operational. It is a very solid machine with return system included. Very stable and always with the right finish! Equipment: Nozzles Format cutters with a diameter of 100mm Blow-off unit Heat unit PUR bonding with warming station for cartridges Pressure rollers 7pcs Hacksaws, straight and angled Brutfmilling top and bottom profile milling radius 1/2mm Scrapers profile/flat Nozzles Brushing brushes -Machine with bottom and top belt (very stable). -Height adjustable at the front (automatic). -Profile milling cutters can be set automatically with program -Cutting saws automatic -everything can be turned on/off via the screen in front -Return options can be operated from the front -------------------------------------------- Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Y ...

Offer 25503 Technical data: - Manual operation + CNC controlled operation - Max. working width 1740 mm - Max. material thickness at 40 kg strength per mm² 0.50 mm - Roller diameter 90 mm - All 4 rollers are motor-driven - Working speed up to 10.5 m/min - Safety Chucks - Swivel control panel with CNC control - E-footswitch - Drive 400 V / 0.75 kW - Space requirement approx. W 2000 x H 1250 x D 850 mm - Weight approx. 850 kg

Key data: 2000 mm, 500 mm, 500 mm

Manual bending bench, 2 m long, with extendable base frame for installation in transporter

EDGETEQ S380 – Edge Banding Machine General data: Model: EDGETEQ S380 Year of manufacture: 2021 Serial number: 0-261-73-9063 Operating hours: 17486 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The EDGETEQ S380 is suitable for high-quality woodworking applications, ensuring efficient and accurate processing in production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40553-13

AMBITION 1650 FC EDITION – Edge Banding Machine General data: Model: Ambition 1650 FC Edition Year of manufacture: 2018 Serial number: 0-261-71-2179 Operating hours: 25189 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The Ambition 1650 FC Edition ensures efficient and high-quality processing, making it suitable for demanding woodworking production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40553-15

Stored in working condition with numerous accessories, digitally adjustable with control box. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17029

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17028

Stored in working condition, buyer must provide transport himself. No elevator available. Auction-ID: A3-43519-17020

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...