bending roll used for sale

Roller conveyor curve 90 degrees Manufacturer: Soco System Condition: Used Model: Rollers Type: 90° degree Total width outside: approx. 1430 mm Total width inside: approx. 820 mm Total width incl. motor: approx. 580 mm Conveyor width: approx. 410 mm Roller spacing: approx. 60 mm Wheelbase: approx. 110 mm Roller Type: Plastic Material: Steel/Plastic Color: Zinc Plated, Light Gray, Orange Including 2 motors Soco 0.12 KW Stock: 4 pieces Price per piece The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Internal Article Number: 2026020302 Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutio ...

Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 470 meters Total width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Conveying height including feet: approx. 250 to 290 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Color: Green & Gray Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available now approx. 470 meters in stock Price per meter Internal Article Number: 2026020502 Thanks to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyor ...

roller conveyor 1500/2500/3000-740-700 RA2294 Make: Blume Roller width (RB): 700 mm Nominal/outer width (NB): 740 mm Length: 1500/2500/3000 mm Roller diameter: 50 mm Roller distance: 100 mm Motor Roller conveyors: no motor Height frame: 60 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: condition: good (used) Nominal / outside width in mm: 760 Roll width in mm: 700 Roll division in mm: 100 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

pressure: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Picot 2100 x 10 mm Number of rolls: 3 rolls Roll capacity cold: 2100 x 10 mm Roll dia upside: Ø 240 mm Dia under roll - side rolls: Ø 180 mm Weight: 3200 kg

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kW Condition: used, completely overhauled, with warranty Specification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit - New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for EMERGENCY STOP - Stainless stee ...

roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 2x 132 kW Condition: used, completely overhauled, with warranty Specification: Pluridrive rolling mill 650 x 2100 mm - used External gearbox model - motor placed on the side of the machine - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - 2 new AC motors: Power 2x 132 kW - 400V, 50 Hz - Cardan joints between gearbox and rolls - New drive gearbox - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushes - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circu ...

Three Broich conveyor belts are available, length conveyor belt 1/2/3: 4400/4070/5500mm, width conveyor belt 1/2/3: 1400/1900/1400mm. An on-site inspection is possible.

Automatic roll stippling machine with pallet magazine Kalcher STA-K - Type: STA-K - Year of construction: 2000 - Pallet magazine with 16 supports - Machine for one-man operation for forming Kaiser, Stern, Salz or Poppy seed (button) and pressure rolls

Technical data: - Galvanized version with collection container + hydraulically operated lifting roof - Load up to 35 t - Volume of double-walled collection container 2000 l - Distance between running track and roof / lateral opening height 1500 mm - Max. interior height 2300 mm - Connection 400 V - Space requirement approx. L 7100 x W 3300 x H 3050 mm - Weight approx. 7000 kg - from warehouse D - 14943 Luckenwalde

Pallet lift table/ pallet turner Manufacturer: Overbeck Year of Make: 2014 Condition: Good (Used) Drive Type: Chain Drive Total length: approx. 1300 mm Total width incl. motor: approx. 1200 mm Total width without motor: approx. 970 mm Roll width: approx. 945 mm / Usable width: approx. 880 mm Roll diameter: approx. 80 mm Wheels: 7 pieces Wheel spacing: approx. 200 mm Stock: 2 pieces Price per piece Internal Article Number: 2026030301 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or t ...

Container roller set, container rollers for moving standard containers, Haacon, 16 to load capacity – used -: Price from location: 7.500.-€ (net) Manufacturer: Haacon Type: 4336.16-231720 Year of Make: 2022 Factory number: 1074982-01-00-001-51 Component Number: 215993 Load/set: (4 units): 160kN Load/Unit: 60kN Rolling speed: max. 6km/h Container castors for moving standard containers Handlebar for handling the roller when dismantled and for resteering with parking brake Castor set consisting of pull linkage, four swivel castors, lockable in the direction of travel Taxiing up to 6 km/h Former new price: 9.907.-€ Available: immediately Condition: like new – only used about 3 times Location: 79183 Waldkirch

Qty. 1 Second-hand 20-Hi Sendzimir Rolling Mill Mfc.: SUNDWIG, PAULY, ABB, Schneider Type: 20-HI – WV 20 SHE Built: 1988 Revamping: 2018 Mechanical & electric including new AGC and X-ray thickness gauge Strip width: 300 – 670 mm Thickness: 0.8 mm Exit: 0.01 mm Rolling speed: 300/500 m/min. Rolling materials: Stainless steel, Copper, Invar, Nickel, Si steel, Mo, Ti

Record Gr.2 Semi-Automatic Roll Press Dough Dividing and Rounding Machine - Manufacturer: Record - Semi-automatic bun press - Size 2 - Weight range: 25- 85 grams - 30 pieces - 380 volts - Machine is completely NEW painted

Erika Record Automatic 3-30 Roll Press Dough Dividing and Casting Machine - Manufacturer: Karl Schmidt GmbH - Model: Erika Record Automat - Type: 3-30 - 30 pieces - Incl. 3 plastic knitting plates - Machine is mobile on castors - Machine is technically and optically in very good condition Technical data: - Weight range : 30gram to 100gram -Dough insert: 900 grams to 3000 grams - Year of manufacture: refurbished 2016 - 400 volts

Compact roll line , for sliced, pressed products There are 3 different tools available. Machine is in good condition and can be tested with dough at any time. More pictures can be sent if desired.

Control: SINUMERIK 840 D rolling power: 800 kn diameter max.: Werkstück: 250 mm work piece width: 80 mm spindle diameter: 110 mm : 100-700 1/min power capacity: 110 kW length: 2600 mm width: 2600 mm height: 2600 mm weight: 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ORT RP12, 2-roll, 12 ton, Thread rolling machine, The machine is in our warehouse, under power

A Krollmann pointing and rolling machine for pointing wire, round, and bar material in preparation for drawing processes is available. Machine body swivel: 90°, shear: available. Wire diameter range: 0.5mm-8mm. An on-site inspection is possible.

Bread roll system Stainless steel clad digital control consisting of: Head machine type K5 Weight range up to 110gr Settling device with long-rolling station Trigger length adjustable 60/40 to 60/100cm mobile - Bakery condition/not cleaned

Support machine with stackerManufacturer: BMTEC GmbHTyp: Care unit stackerYear of construction: 20093x400V 1kWThe condition: Defect must be completely checkedDetails see pictures.

Fortuna Automat A3 Dough Dividing and Forming MachineProduct descriptionManufacturer: Edmund SchröderType: Fortuna Automat A3Condition: used, functional, bakery condition30 divisionDough dividing and knitting machineOuter dimensions: W.: 65 cm, D.: approx. 74 cm, H.: 145 cmDetails see pictures

used pastry forming roller Kalmeijer KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.

Kalmeijer Feed Roller GearKalmeijer Feed Roller Gear NEWHer: KalmeijerType: Gear for Feed RollerCondition: New Gear (KGM):D These gears are part of the machine's drive train. They precisely transmit the power from the motor to the various rollers to ensure synchronized and uniform transport of the dough. Kalmeijer Pastry Machine KGMBhe KGM is a well-known type of machine in the food industry, especially in bakery and confectionery production.Kalmeijer Feed Roller (KGM):D ies is one of the conveyor rollers in the

König Mini Rex 4000 Roll Plant  Product descriptionManufacturer: KönigModel: Mini RexType: 4000 TR/G-S SKG58+RK58Year of construction: 2007Roll plantModel: G 2000Type: SA2König G2000 Compact plant for round-knitted, stamped, oval or folded-long-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeriesCompact pre-proofer system with Mini Rex Futura head machinemax. Hourly output in proofer operation: 2,000-2,500 pieces, infinitely adjustable for higher output

Bread press Werner&, Pfleiderer Rotamat E + 3 WirktellerProduct descriptionManufacturer: Werner&, PfleidererType: Rotamat 3Current type: 3 / N - 50 HzNominal voltage: 380 VNenn operating current: 2.5 AMax. Pre-fuse: 16 ACondition: used, in working order, bakery condition - please clean thoroughly before useWith three red plastic knitted platesThe working room height is adjustableFunctions: For cutting or actingDetails see pictures.

used pastry forming roller Kalmeijer KGM Pretzel Small 1383-912AProduct descriptionManufacturer: KalmeijerType: Pretzel KleinNo.: 1383-912AZstand: usedDough figure:Dimension: 55 mmThickness: 4 mmWeight: 7 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Flowers 1612-900BProduct descriptionManufacturer: KalmeijerType: FlowersNo.: 1612-900Bowant: usedPastry figure:Dimension: 55 mmThickness: 5.5 mmWeight: 15 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM German Männchen 1502-930BProduct descriptionManufacturer: KalmeijerType: German MännchenNr.: 1502-930Bowant: usedDough figure:Dimension: 82x33 mmThickness: 2.5 mmWeight: 8 grRoller width: 250 mmDetails see pictures.

Kalmeijer pastry forming roller KGM Taler small 1120-910AProduct descriptionManufacturer: KalmeijerType: Taler smallNo.: 1120-910AZstand: usedPastry figure:Dimension: 55 mmThickness: 4 mmWeight: 13 grRoller width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Nut Sticks 1263-930BProduct DescriptionManufacturer: KalmeijerType: Nut SticksNo.: 1263-930Bowant: UsedDough Figure:Dimensions: 77 x 25 mmThickness: 3.5 mmWeight: 11 grRoller Width: 250 mmDetails see pictures.

Kalmeijer Pastry Forming Roller KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.

used bread press RotamatManufacturer : WPTyp : Rotamat GS380 Volt, weight range from 30 - to 80 grams30 graduation including 1 knitting plateThe Rotamat GS roll press from the manufacturer WP is a professional machine used in bakeries and other bakeries to form rolls and other pasta. The Rotamat GS enables precise and efficient shaping of the dough to produce uniform and attractive rolls. With this machine, bakeries can optimize production processes and ensure the consistency of their baked goods. The

Bread roll line König Mini Rex G2000 Â Product description Manufacturer: König Model: Mini Rex G2000 Year of construction: 2003 Condition: used, functional, bakery condition - please thoroughly before use König G2000 Compact system for round-knitted, stamped, oval or wrapped-rolled. The compact proofer with an hourly output of approx. 2,500 pieces is the ideal solution for micro and small businesses or in-store bakeries compact pre-proofer system with Mini Rex Futura head machine max. hourly output in proofer operation: 2,000-2,500 pieces, infinitely variable

Fortuna Roll Press Automatic A3 Dough Dividing Machine Product Description Manufacturer: Fortuna Machine Type: Automatic Machine A3 / Size 3 With two red plastic knitting plates The working chamber height is adjustable Functions: Only cut or cut as well as act Details see pictures.

Kemper Sprinkler Dough Spreader with Turntable Manufacturer : KemperFor sesame poppy seeds etc.wCondition: used, baker's conditionMaterial: stainless steelwith turntableon wheels, mobile For details see pictures.

Roll Press Erika Record Semi-Automatic Product Description Manufacturer: Erika Record Type: Semi-Automatic Condition: used, functional, baker's condition Roll press for all doughs for dividing dough and rounding 30-piece Details see pictures.

Roller / Roller for Head Machine Fortuna Primus NewProduct descriptionManufacturer: FortunaType: PrimusCondition: NewRoller width: 37.3 cmDiameter: 5.5 cmSee pictures for details.

Roller for head machine Fortuna Primus 6-row NewProduct descriptionManufacturer: FortunaType: Primus 6-rowCondition: NewRoller width: 44 cmTotal length: 77 cmDetails see pictures.

Roll press Fortuna-Schröder semi-automatic machine size 3â Product descriptionâœ" Manufacturer: Edmund Schröderâœ" Type: Fortuna Semi-automatic machine size 3âœ" 30 divisionâœ" Dough part and knitting machineâœ" Power supply: 400 V, 50 Hz, 1.1 kW For details see pictures.

Roll line Gulliver IRIS 20 Manufacturer : Gulliver Model : IRIS 20 Type : Special-R Year of construction : 2000 Long dough laying belt / infeed belt LED control Stepless cutting length adjustment Machine is mobile with Mehler inlet belt and discharge belt Foldable Weight range: from approx. 25 to 1200 gr depending on the type of dough Connection 400V, 1.5 kW, 16A-CEE Plug Dimensions: L 2200 x D 670 x H 1700 mm Tested and cleaned

Manufacturer : Gulliver Model : IRIS 20 Type : Special-R Year of construction : 2006 Long dough laying conveyor / infeed belt LED control Stepless cutting length adjustment Machine is mobile with Mehler inlet belt and outfeed belt can be folded up Weight range: from approx. 25 to 1200 gr depending on the type of dough Connection 400V, 1.5 kW, 16A-CEE Plug Dimensions: L 2200 x D 670 x H 1700 mm  Details see picture