127,606 used machines on RESALE, but how to find them? Machine Search
Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg
used
Diameter Capacity 3-10 mm Bending arm lenght 755 mm
Key data: 642 t
CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA
used
Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm
Key data: 15 t, 66 mm
Burger Press D07 Length 1.20 m Width 0.60 m Height 1.70 m 2 Hand control Switch to foot control 1 press die
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg
Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg
Inv. Num. : 5648 Type: XOTM 60 Producer: UNIT Created: 2004 Parameters: Minimum tube diameter: 20 mm Maximum tube diameter: 60 mm Machine length: 4900 mm Machine weight: 130 kg
SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.
Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg
Key data: 3100 mm, 2700 mm, 2300 mm
Hydraulic press brake - conventional including paternoster system for uncomplicated tool change with 25 hangers. for export NC Press Brake Heut Lotze Type: PZ 100 - 25 Built in 1973 Pressure 100 t Bending length 2500 mm Stand width 2100 mm Weight approx.: 11.000 kg, Dimensions (LxWxH) approx.: 3,100 x 2,300 x 2,700 mm -------------------------- Paternostar system Schwab Maschinenbau Type: SIB 430/340 Built in 1982 Number of compartments 25 max. shelf load 150 Dpa max. device payload 3750 Press brake and paternoster can be purchased separately Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!
Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg
Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg
Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm -Length: 3500 mm -Weight: 70 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 30 x 90 mm -Tool total length: 2500 mm -Rail length: 2500 mm -Weight: 95 kg
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: not shared -Tool dimensions: 30 x 90 mm -Tool total length: 2000 mm -Rail length: 2500 mm -Weight: 83 kg
- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel
We offer directly on behalf of the owner : Bending press, second-hand Make : Graebener Maschinentechnik (Gräbener) Type : GRNM Year of construction : 2005 Flexural force max.: 16.000 kN ( 1.600 t ) Tool length : 1,600 mm Data at 520 N/mm2 Pipe diameter max.: 1,524 mm Tube diameter min.: 457 mm Sheet thickness max.: 40 mm Max. pipe length: 13.2 m Pipe length min.: 6m Pipe weight max.: 25 t Total power requirement approx.: 245 kW / 400 V / 50 Hz Approx. space: 27 x 3 m Total weight approx.: 90t / basic machine approx. 65t Further technical data and details on request or see data sheets in photos / PDF The machine was built in 2005, worked until 2021 and was professionally dismantled and packed for transport.
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 10 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 32 x 90 mm -Tool total length: 2430 mm -Transport dimensions: 820/90/H96 mm -Weight: 80 kg
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...
Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW ...
Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die
Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.
Key data: 220 t, 4000 mm
with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.
used
Key data: 2000 mm, 1 mm, 2000 mm
Electric bending machine Schechtl 2000x1.25mm with 6-way control, in good condition. The machine can be loaded with a forklift. You will receive a proper invoice with VAT, price net 6900.-. Shipping possible throughout Europe. Please call us or send us a wading app.
used
Key data: 200 mm, 1 mm, 200 mm
Sell here an electric Schechtll bending bench with 6-way control and a matching 2m hand-held guillotine shears. Price net, you will receive an invoice with VAT.
Offer 24361 Specifications: - 3 single mot. Driven rollers manual + controlled operation - Max. torque per roller 1600 Nm - Stroke of the bending roller X – axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm - Shaft diameter 105 mm - Roller diameter up to approx. 260 mm - Useful length of the standard shafts approx. 300 mm - Shaft rotation infinitely variable 1 - 22 rpm - Bending performance e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm - Castors - Drive 400 V / 3 x 1.1 kW - Hydr. Drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. Medical history - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - Control PC 100 in sep. Control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bendin ...
used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992
Control Thrust... 80t Bending length ... 2620mm controlled axes ... 4 Plunger stroke... 200mm Machine weight ... 5750kg The machine is in good condition, possible to test under power.
Used, technically overhauled reinforcing steel bending machine. Rotation of the bending plate 5/7.5/10/15 Power requirement 3.15/3.65 KW 2 footswitches with emergency stop function. Bending capacity max. 1 piece 45mm D. Reinforcing steel or 3 bars 28mm D. The control system is upgraded to Siemens Touch Display CC. Latest standard. 1 set of standard bending tool.
2000mm 66 ton Y1 Y2 R1 Z1 Z2 X1 X2 Excellent condition With tooling
Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90
Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions
P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bendging Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.
Used machine in good condition. Available for immediate delivery.
Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm
Key data: 1000 mm, 1 mm
with rebate groove and wire insertion grooves Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness: 1.0 mm . Colour: blue Machine weight: 45 kg Space requirement: 1200 x 400 x 1000 mm Shaft diameter: 50 mm
maximum number of results exceeded
please refine your search
10 € 
