bending roll used for sale

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 40 mm -Material: Stainless steel -Transport width: 365 mm -Wave: Recording M8 -Quantity: 1x transport roller available -Overall dimensions: Ø 40 x 395 mm -Weight: 1.2 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 305 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 46x transport casters available -Price: per piece -Dimensions: 350/80/H80 mm -Weight: 1.9 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 68 mm -Transport width: 305 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 4x transport wheels available -Price: per piece -Dimensions: 350/80/H80 mm -Weight: 2.2 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 40 mm -Transport width: 250 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 3.2 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 255 mm -Photography: see photos -Number: 1x transport wheels available -Dimensions: 300/80/H80 mm -Weight: 1.9 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 32 mm -Transport width: 305 mm -Receiver: single-sided, ball-bearing mounted (see photos) -Number: 8x transport wheels available -Price: per piece -Dimensions: 395/70/H70 mm -Weight: 1.6 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 60 mm -Transport width: 305 mm -Socket: M10 single-sided, ball bearing -Number: 5x transport wheels available -Price: per piece -Dimensions: 330/60/H60 mm -Weight: 1 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 80 mm -Transport width: 360 mm -Photography: see photos -Number: 1x transport wheels available -Dimensions: 410/80/H80 mm -Weight: 5 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 32 mm -Transport width: 305 mm -Socket: M10 single-sided, ball bearing -Number: 24x transport casters available -Price: per piece -Dimensions: 330/32/H37 mm -Weight: 0.7 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 90 mm -Transport width: approx. 660 mm -Mounting: ball bearings on both sides, see photos -Shaft: Ø 30 mm -Number: 1x transport wheels available -Dimensions: Ø 90 x 750 mm -Weight: 6.8 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 103 mm -Transport width: approx. 645 mm -Mount: ball bearings on both sides with bearing block (see photos) -Shaft: Ø 30 mm -Quantity: 1x transport roller available -Dimensions: Ø 103 x 845 mm -Weight: 8.7 kg/pc.

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: approx. 500 mm -Wave: Dimensions see photos -Quantity: 118x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 540 mm -Weight: 1.3 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 50 mm -Transport width: 410 mm -Shaft: Ø 10 mm, dimensions see photos -Quantity: 15x transport rollers available -Price: per piece -Overall dimensions: Ø 50 x 475 mm -Weight: 0.6 kg/piece

Welding Rotator for Flanges – Motorized and Idle Rollers General data: Machine type: Welding rotator Weight: approx. 2000 kg Technical details: Motorized rollers for controlled rotation Idle rollers for supporting and aligning workpieces Control system for adjusting rotation speed and direction Heavy-duty steel frame suitable for high load capacities Description: Industrial welding rotator designed for rotating heavy cylindrical workpieces such as pipes, tanks, and flanges during welding operations. The combination of motorized and idle rollers ensures stable positioning, smooth rotation, and improved welding precision and efficiency. Auction-ID: A7-45351-20

Welding Rotator for Flanges – Motorized and Idle Rollers General data: Machine type: Welding rotator Weight: approx. 2000 kg Technical details: Motorized rollers for controlled rotation Idle rollers for supporting and aligning workpieces Control system for adjusting rotation speed and direction Robust steel frame suitable for heavy loads Description: Professional welding rotator designed for handling and rotating heavy cylindrical workpieces such as pipes, tanks, and flanges. The system ensures stable positioning and smooth rotation during welding operations, improving precision, efficiency, and operator safety. Auction-ID: A7-45351-19

including label size 100x50 mm; 110x170 mm; in 10 different boxes including opened boxes; without pallet; Auction-ID: A1-43992-220

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers, curved roller conveyor -Conveyor belt rollers: Transport rollers, carrying rollers, curved roller conveyor, diameter 50/86 mm -Transport width: 575 mm -Wave: Dimensions see photos -Material: Plastic, galvanized steel -Quantity: 41x transport rollers available -Price: per piece -Overall dimensions: Ø 86 x 620 mm -Weight: 1.8 kg/piece

Type: KS-SW-2-50-R-2-400-SPT-1400-12, consisting of, 1x Sander” winder type AFW-1-1400-1200-12-B with BSTgroup” digitial controller (2022), edge cutting system, 1x Sander” winder ABW-1-1400-1200-12-B with Siemens” touchpanel BSTgroup digital controller (2022), 2-door switch cabinet HSS-sara, used floor space approximately 7.500x2200mm, total weight approximately 5000kg Auction-ID: A1-43459-13

Type Selen-Y Electric, consisting of, 24x infrared heater module, 1x transverse bridge with double printing head, 1x transver bridge with 1 printing head, 1x winder Sander” AFW-1-1400-1200-12B (2022), 1x winder Sander” ABW-1-1400-1200-12-B with Siemens” touchpanel (2022), 2x Basler” machine vision camera with led lightning, 1-door switch cabinet with monitor (camera control unit), 1-door switch cabinet JAC de Vries” R324 (2022), 1-door switch cabinet Rimas” Pamela 1400 (2023), 2-door switch cabinet Sander” HSS-Pamela (2022) used floor space approximately 19.000x3000mm Auction-ID: A1-43459-11

Type LAMB 1400, 2-layer, laminating pressure 4-6N/cm, laminating temperature 30-80°C, coating weight 3-5g/m2, production speed 1m/min, consisting of, 3x winder, 1x \"TSK LIA\"-brushing unit (2023) s/n 1311, horizontal wet proces cleaning unit, 3x IBC for demineralised water, 1x water treatment unit, overhead travelling crane with abus electrical chain hoist capacity 2000Kg, 1x \"Technotrans\" heating / cooling unit type teco tt 140.27.058, nominal heating/cooling capacity 27/200kW (2022), 1- \"Technotrans\" heating / cooling unit type teco wtd 150.09.25 nominal heating/cooling capacity 9/600kW (2022) 1x air-handeling cabinet, 1x 7-door switch cabinet. Used floor space approximately 13.000x7100mm Auction-ID: A1-43459-9

Type Reco 800, consisting of: roll unwinding system with portal crane and Abus” electric chain hoist capacity 1000kg, Kroenert” applicator unit, laminator unit, overhead ir heater, 3-zone drying tunnel, pulling station and rewinder, 3 Pfeiffer” vacuum pumps type HiScroll 12, Wiltec” glue mixing and dosing unit type 46.2Kgluemix VR, Technotrans” modular temperature control unit type teco wd 150, heating / cooling capacity 9/600kW, 1 pneumatic switch cabinet, 11-door electrical switch cabinet, used floor space 19.000x4200mm, total weight approximately 30.000kg Auction-ID: A1-43459-14

Type D350H.1, consisting of amongst others: retractable side panel, 7x Ebara” dry pump type AAS200/100/70WN, 1x Edwards” mechanical booster type EH 2600 IND, 5x Trumpf” RF generator type PFG5000RF, 2x type PFG1000RF and 1x type PFG1600RF, 1X Marx” transformer, 4x 2-door electrical switch cabinet, 3x i-chamber gas cabinet, 1x Single” temperature controller type STO 1-24-24-D2/ZGD (2010) and 2x type STO 1-6-12-D0/D2 (2010), combined piping and steel structure with platform and stair, used floor space approximately 9000x8500mm Auction-ID: A1-43459-4

Type PV-ODW 1462/80 operating height 0-80mm, operating speed max. 6 m/min., max. Press force 100kN, temperature max. 200°C, complete with: unwinder unit, Bürkle” glue top-bottom applicator type EKM, 2KM” glue metering mix module type PGM320, unwinder unit, Sander” roll winder type AFW-1-1400-1200-12-B (2021) with 2-door switch cabinet, 3x Bürkle” oil heater unit, central switch cabinet with Siemens” touchscreen panel and Siemens” simatic mobile panel,”Bürkle” 6-door switch cabinet and fixed crane portal with SWF” electric chain hoist capacity 1000kg. Used floor space approximately 20.000x6000mm, total weight approximately 62.000kg Auction-ID: A1-43459-7

Unused!, Consisting of: steel chamber hull with various fixtures like sensors, valves and piping, steel structure with platform and stairs 5x vacuum valve manifold cabinet, lot of steel structures (not mounted), casco dimensions approximate, 13.000x5000x4000mm, total used floor space approximately 12.000x20.000mm Auction-ID: A1-43459-5

Type D1340, Roll-to-Roll top cel deposition line, consisting of amongst others: (ground floor) 11x Trumpf” RF generator TruPlasma RF series type 3000 G2 (2022), 5x Edwards” vacuüm - booster combination Drystar vacuümpump type GV250 -” type EH2600IND Booster 380 (2008), 2x Druschke” vacuüm - booster combination vacuümpump type A70561900 - Druschke” booster type A307-51-935, 4x Single” high temperature control unit type STO 1-9-42, coolingsystem with 2 x Grundfos” pump type DE7309BE, UV light, pressure vessel, Alfa laval” plate heat exchanger, 1x retractable side panel. On the first floor, consiting of: 7x water manifold, 10x 2-door electrical switch cabinet, 1x 1-door electrical switch cabinet, 2x Edwards” booster type EH4200 IND, various messuring equipment. On the second floor, consisting of: 1x pressure valve cabinet, 4x Single” high temperature control unit typ ...

Consisting of: 4-zones with 8 connected process modules : feeding, brush, blow-off, ultrasonic cleaning, blow-off/tensioning/blow-off, 4-step cascade rinsing, blow-off and drying module, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2009), 2x winder / unwinder unit equipped with Boschert” safety-chucks and enclosure, one side has built-in cooling fans, with 2-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, 3-door electrical switch cabinet, used floor space approximately 18.500x6000 Auction-ID: A1-43459-19

Consisting of: Branson” welding unit type MWX100 built on transversal system with control module type VersaGraphix and spare welding unit MWX100, 2x Sander” winder types ABW + AFW-2-1400-1200-12-B with 1x Siemens” touchscreen panel, both equipped with cooling ventilation and enclosure, Sander” 2-door switch cabinet, used floor space approximately 7.800x3600mm, total weight approximately 5000kg Auction-ID: A1-43459-12

Consisting of: 8 connected process modules : feeding, pre-rinse, blow-off, caustic bath, blow-off, flush bath with 4-step cascade rinser, acid, flush with 4-step cascade rinser, isolation and drying module, 2x Kampf” winder / unwinder unit with Boschert” safety chucks, 2-door electrical switch cabinet, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2008), powder dosing / mixing unit, 6-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, used floor space approximately 17.500x6000mm Auction-ID: A1-43459-18

Consisting of: 14 connected process modules : feeding, blow-off, 3x lye bath, blow-off, 4-step cascade rinser, flush, acid, flushing, brush, flush, inspection, drying and output module, 2x winder / unwinder unit equipped with Boschert” safety-chucks and enclosure, one side has built-in cooling fans, 4x Becker” vacuüm pump type SV1100/1 enclosed in soundproof stainless steel cabinet (2022) 5-door electrical switch cabinet, walking platforms with stair, used floor space approximately 26.000x6000mm Auction-ID: A1-43459-17

Type: AHT 2150-ek-so, with 3 Annealing-drums, max. temperature 200°C, heated by electric tube radiators, capacity 84kW (24 x 3,5 kW) , flowrate 50.000m3/h, build in isolated housing, dimensions approximately 6800x4600x4000mm, 2-door switch cabinet with ”Siemens” touchpanel, 1x Sander” multi position winder type AFW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 1x Sander” guidance unit type ABZ-1400-1200-12 (2023), 1x Sander” (un)winder type ABW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 4-door switch cabinet, Used floor space approximately: 15.500x6000mm. Auction-ID: A1-43459-8

Consisting of: 1x BZT” 3-axes bridge milling machine type PFU-S 1020-G with Siemens” touchscreen panel and Vevor” industrial chiller type CW-5200, 1x Rösler” transversal blasting head with Rösler” dry blasting unit combined with Nederman” dust collector type MJC-MINI (2023), 1x brush-roller cleaning unit with Milltech” dust collector type HVU solo 18 performance, 2x Sander” winder type AFW-2-1400-1200-12-B 1x equipped with Siemens” touchscreen panel and 2-door switch cabinet, used floor space approximately 12.500x6200mm Auction-ID: A1-43459-10

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece

hydraulic concrete steel Benders Krupp Futura B 703 steel bending machine with accessories and complete instructions Tech. Data performance table - steel 50-55 kp/mm2 Diameter 22 mm - 6 bars per bending, 28 mm-4, 32 mm 3,. Mtfgtw 50 mm 2 speed 4-12 / min Operation - with control or manual, operating dial - HAND - machine with possibility of 3 bending angle set - every page - 3 links + 3 right complete documentation, operating instructions much accessories more info upon request You can edit, flat, round steel accessories - various bending rollers, bolts, reducing roll, Overarm and the machine has device for Pipes. Bulk 2.3 x 1 x 1 m, Btto 1500 kg

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Hydraulic press brake, used Hydraulical press brake, used type / model: D 160-25 Make / make: GWF Year / year of make: 1993 Pressure / force: 160 t Bending length / working length: 3,050 mm Stand width approx. / distance b/n standards: 2.550 mm Table width: 220 mm Stand RADIUS / depth of Cap: 280 mm height / shut height: 440 mm working stroke ca / stroke. Max 250 mm Hubgeschw. / speed of stroke: down: down; 90 mm / s Press down 11 mm / s Expensed. / upward: 90 mm / s Machine weight / weight: approx. 13 t Power consumption / connected load: 22 kW Spec/specif.: 2-hand/foot control / 2 foot switch - manual

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßer CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Schroeder & Bauer WB 32-1 Universal wire and belt bending machine Wire feed Plain text display Press force monitoring Wire straightener Bosch stripping devices Bracket and brush motor with mounted tool W32/1-32 Soundproof cabin Fäßerb CU wire with stamped parts Switchboard Item condition: very good Description of the manufacturer, deviations possible. You purchase the machine as it can be seen in the pictures. The punch bending machine is located in Hildesheim and can be dismantled and picked up by the customer there. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race

Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg

Technical data: 4 bending rolls Max bending range: 3,000 mm external switching and Control Panel, as well as counter holder

Round bending machine

Tube bending machine

Original MINGORI® Model OB40 - Mobile hydraulic tube bending machine with manually operated hand pump, suitable for bending pipes according to DIN, API and ASA standard, as well as coated PE-HD pipes. The machine works in the compression bending process. The greatest surmountable material resistance torque that can be overcome with the machine is about 28 cm³. Maximum bending force 18 tons Maximum bendable pipe diameter 88.9 mm Smallest possible bendable pipe diameter 17.2 mm Smallest bending radius depending on the radius of the bending punch from 46.5 mm to 330 mm Smallest bending angle 110° (this machine also available for bending angles up to 180°) Weight of the basic machine approx. 140 kg The machine is delivered in a storage chest – Dimensions of the chest approx. 102 x 32 cm x H 41 cm Weight basic machine 140 kg With electrically operated hand pump (as mo ...

Bending length: 1070 mm Bending capacity: 3.0 mm Reel diameter: 95 mm Roller speed: 9 RPM Engine power: 1,1 kW Weight: 370 kg Dimensions: 1350 x 760 x 1250 mm

Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"

Max bending length: 1020 mm Max. sheet metal rod: 2 mm steel motor upper cheek adjustment via foot switch manual rear stop diverse bending rails