bending presse used for sale

Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm

Used machine in good condition. Available for immediate delivery. - Operating hours: 16.304 - Pressure force: 150 t - Bending length: 3.100 mm - Axes: Y1, Y2, X, R, Z1 & Z2 - Distance between uprights: 2.750 mm - Working speed: 10 mm/seg - Returning speed: 150 mm/seg - Locking speed: 150 mm/seg - Throat: 315 mm - Stroke max: 215 mm - Power: installed max: 11 + 15 kW - Weight: 9.800 kg - Dimensions (long x wide x high): 3.910 x 1.900 x 2.660 mm

Used machine in good condition. Available for immediate delivery. - Type: TASC 6000 - Pressure force: 86,68 t - Bending length: 2.720 mm - Axes: 6 - Working area: 860 x 2.210 mm - Working speed: 25 mm/seg - Control: 24 - Stroke max: 215 mm - Weight: 8.200 kg - Dimensions (long x wide x high): 3.100 x 1.740 x 2.840 mm

Used machine in good condition. Available for immediate delivery. - Open Height: 1.000 mm - Inclination of beam: +- 3 mm - Backgauge movement: 800 (X) mm - Operating hours: 21.428 - Type: hydraulic - Pressure force: 120 t - Bending length: 3.110 mm - Axes: X, Y, R, Z1 & Z2 manual - Working area: 200 (Y), 600 (X), 880 (max. X), 320 (R) mm - Distance between uprights: 2.690 mm - Working speed: 200 (Y) / 500 (X) / 250 (R) / 1.000 (Z) mm/seg - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T 3000 - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 8.300 kg - Dimensions (long x wide x high): 3.600 x 1.750 x 2.330 mm

Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 105 t - Bending length: 3.050 mm - Axes: 8 - Working area: 200 - 2.880 mm - Distance between uprights: 3.150 mm - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Frame type: O-frame - Returning speed: 110 mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 7.700 kg - Dimensions (long x wide x high): 4.406 x 2.555 x 2.555 mm

with BendMaster - Operating hours: N/A - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 6 (Z1, Z2, X1, X2, R1 y R2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm - Weight: 11.250 kg

Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 55 t - Bending length: 2.050 mm - Axes: 8 - Working area: 200 - 1.770 mm - Distance between uprights: 2.100 mm - Returning speed: 180 mm/seg - Frame type: O-frame - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 5.000 kg - Dimensions (long x wide x high): 3.388 x 2.385 x 2.555 mm

Machine fully revised with basic maintenance realised: Including: folding crowning - Operating hours: 38.498h - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 4 (X+R, Y1/Y2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Weight: 11.250 kg - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm

Used machine in good condition. Available for immediate delivery. - Pressure force: 130 t - Bending length: 3.230 mm - Axes: 4 - Distance between uprights: 2.690 mm - Working speed: 10 mm/seg - Throat: 420 mm - Control: TRUMPF TASC 6000 - Power: installed max: 28 kW - Dimensions (long x wide x high): 3.980 x 1.740 x 2.835 mm - Weight: 10.900 kg

Used machine in good condition. Available for immediate delivery.

Used machine in good condition. Available for immediate delivery. - Table width L -R: 200 mm - Operating hours: pending - Pressure force: 400 t - Bending length: 6.000 mm - Axes: X-R-Z1-Z2-X - Working area: 0 mm - Distance between uprights: 5.050 mm - Working speed: 11 mm/seg - Returning speed: 120 mm/seg - Throat: 400 mm - Stroke max: 300 mm - Oil tank capacity: 500 l - Power: installed max: 42 kW - Weight: 37.000 kg - Dimensions (long x wide x high): 0 mm

WILA Table - Stroke max: 200 mm - Working area: 3.100 mm - Pressure force: 160 t - Bending length: 3.100 mm - Axes: 6 - Working speed: 10 mm/seg - Control: CYBELEC ModEva 10S - Weight: 10.500 kg

Only 12.500 working hours. Included options: ASP = Additional Short Blades. ATC = Automatic Tool Change. AUT = Auxiliary Upper Tool. - Bending length max: 2.550 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Number of bends per side max: 20 - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2,2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: 40 C? +- - Bending angle: 0,2 C? - Straightness and parallelism: 0,6 mm - Bending tolerance: 0,2 mm +- - External bending radius min: 1,5.../2 mm - Compressed air pressure: 6 bar - Power: installed max: 66 kW - Main switch: 160 A  ...

Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Voltage: 380 V Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Weight: 2,5 T

chamfer lenght: 3050 - 4020 mm 2 pieces of upper tools for press brake: Deer foot upper tool No.1, picture. No. 2: Dimensions: 3000 x 75 mm, price = 670,-- Deer foot upper tool No.2, picture. No. 3: Dimensions: 3000 x 120 mm, price = 670,-- Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter Capacity 3-10 mm Bending arm lenght 755 mm

Wire diameter between 3-8 mm

tube diameter: 45 mm wall strength: 2 mm bending radius min.: . mm Control: total power requirement: kW weight of the machine ca.: 1,7 t dimensions of the machine ca.: 5x0,85x1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bending Device, Round Bending Device PAGUS Bending Diameter: Ø 41, 55, 58, 84 mm Jaw Height: 50 mm Step Insert: Ø 87/75 mm Fastening in Vise ! Dimensions: 760 x 200 x 200 mm

- Working area pipe steel  up to 30 mm x 2 mm - Pipe working area stainless steel  up to 30 mm x 1.5 mm - Pipe extension length 2,000 mm - Bending angle up to 180° + 10° overbending - Automatic bending sequence ( bending, twisting, longitudinal ) - CNC control - Input PC with software Transpro V2 + Tanspro V2 package (indication of previous owner) - Function triggering via hand switch - Clockwise bending direction - Radius range max. 125 mm mm -Auto. Mandrel lubrication - Laser scanner for security area - Incl. existing used tool for stainless steel pipe 1 mm  15, 18, 22, 28 mm Bending radius 1.5 D (various wrinkle smoothers, mandrels

Progress MSR 20/6 Straightening and Bending Machine - Year of Manufacture: 2015 - Wire Diameter: 8 mm - 20 mm - Straightening Length: 500 mm - 14,000 mm - Rotor Straightening System: Equipped with a feed unit - Automatic Wire Diameter Changeover - Max Feeding Speed: 160 m/min - Stationary Shear - Includes: 6 reels, each with 5-ton coil capacity The 2015 PROGRESS MSR 20/6 is a specialized bending machine used primarily in the construction and manufacturing industries for processing reinforcing steel bars and wire. Manufactured by Progress Maschinen & Automation AG, this model is designed for high efficiency and precision in bending and cutting operations, particularly useful for creating structural reinforcements. Key Specifications and Features - Bending Capabilities: The MSR 20/6 is typically equipped to handle multiple wires simultaneously, up to six wires with a diameter around 6  ...

1992 Günzburger Werkzeugmaschinenfabrik GmbH H 100-2 100t An oil-hydraulic die-bending press, manufactured by Günzburger Werkzeugmaschinenfabrik GmbH. The machine has already been completely overhauled once. It is still fully functional. Type: H 100-2 Year of construction 1992 Lifting force 100 t Pressing force: Max 1000 kN Stroke: Max 200 mm Operating pressure: Max 290 bar This is an oil-hydraulic die-bending press, commonly used in metalworking for bending and shaping metal sheets. Find more here - / Contact us at -

Manufacturer: Faccin Model: 4 HEL 2128 Type of Machine: Round Bending Machine Condition: used Find more here - / Contact us at -

Key data: 2040 mm, 1 mm

with rebate groove in the upper shaft, with steel wheel and scale, solid, stable construction, with wire inserts, 70 mm feed of the rear roller, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2040 mm Sheet thickness: 1.0 mm Colour: green Machine weight: 600 kg Dimensions: 2200 x 650 mm Diameter:. 70 mm Machine number: 8413105

Specifications: Working length: 3050 mm Max. bending power: 30.0 mm Max. bending capacity length 1500 mm: 42 mm Bend: 25.0 mm Diameter upper roller: 460 mm Diameter lower roller: 460 mm Number of driven rollers: 3 hydraulic snap roller bearing Engine power: 37 kW Dimensions (length x width x height): approx. 5850 x 2550 x 2650 mm Weight: approx. 30 tons Note: Compact design, therefore low space requirement Parts of the hydraulics installed under the machine

Specifications: Working length: 2550 mm Max. bending power: 6.0 mm Bend : 4.0 mm Diameter upper roller: 176 mm Diameter lower roller: 176 mm Control panel with digital display Motor power: 7.5 kW CE mark Dimensions (length x width x height): approx. 4000 x 1400 x 1500 mm Weight: approx. 3.6 tons Note: the machine was used exclusively for straightening coated aluminum sheets Rollers were wrapped in foil, which was removed without leaving any residue Condition of the rollers almost as good as new few operating hours

Specifications: Working width: 1050 mm Max. bending power: 100.0 mm Max. bend: 80.0 mm Diameter upper roller: 530 mm Diameter of side rollers: 530 mm Conical bending device by inclined position of the two side rollers Mobile control panel with digital display Engine power: 37 kW Hydraulic Safety Chucks CE mark Net weight: approx. 16 tons Auxiliary: 2. Roller set : Diameter upper roller: 360 mm Diameter of side rollers: 360 mm

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Key data: 50 t, 270 mm, 850 mm

Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!

Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

WKS003 Tool cabinet set for bending Directly from the manufacturer, the original from the patent holder of Apfel GmbH. with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm two-tone powder-coated (Trumpf) Case: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 Kg net (475Kg gross) Pre-assembled as a set for approx. 33 linear metres of bending tools. Available in different sizes and with many accessories!

! KNIFE RETURNS! WKS003 Tool cabinet set for bending Directly from the manufacturer, the original from the patent holder of Apfel GmbH. with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm two-tone powder-coated (Trumpf) Case: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 Kg net (475Kg gross) Pre-assembled as a set for approx. 33 linear metres of bending tools. Available in different sizes and with many accessories!

! KNIFE RETURNS! WKS003 Tool cabinet set for bending Directly from the manufacturer, the original from the patent holder of Apfel GmbH. with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm two-tone powder-coated (Trumpf) Case: gentian blue structure (RAL5010) Uyjcshalsf Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 Kg net (475Kg gross) Pre-assembled as a set for approx. 33 linear metres of bending tools. Available in different sizes and with many accessories!

Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight

Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,

Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools

Section bending tools included: tubedia 50 mm amp; 80 mm Number of rolls: 3 rolls Roll capacity cold: 2550 x 15 mm Profile bending machine: yes Pre-bending : yes

NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...

Bar diameters 8-10-12 mm Maximum Bending Angle: 180° Maximum Pulling Speed 144m/min Bending lenght : 1650 mm