128,673 used machines on RESALE, but how to find them? Machine Search
Frame dowel and slotted hole drilling machine from Hofmann HT 200 U with angle adjustment Special drilling machine for staircase construction, window construction and universal use by pneumatic height adjustment. Angled dowels and picket holes are easy thanks to the rotatable drilling unit realizable. Motor pole-switchable, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Start of the motor with practical handle switch Precision Chuck with Two Inserts 16mm and M10 Thread Table size approx. 1100 x 240mm Linear laser for exact positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the processing height, dowels on two levels without changing The desired drilling heights can be achieved for each drilling level with a handwheel and digital counter , the changeover is then pneumatically done from the front Transve ...
Offer 25461 Technical data: - Max. pressing force 30 t - Press pressure regulation - Stroke infinitely adjustable up to 200 mm - Lifting speed adjustable - Max. installation height 450 mm - Machine table with T slots W 800 x D 500 mm - Penetration between the columns 600 mm - Usable table surface W 800 x D 500 mm - Drive 400 V / 11 kW - Space requirement approx. W 1000 x H 2300 x D 1600 mm - Weight approx. 2500 kg
Dear Sirs, We are pleased to offer the following Used Open Die Forging Press, manufactured by Kawasaki (Japan), a well-known and reputable Japanese OEM. EQUIPMENT OVERVIEW Equipment: Open Die Forging PressManufacturer: Kawasaki (Japan) Manufacturing Year: 2012 Condition: Used, in production until May 2025 Application: Forging of rings and heavy forged components The press owner supplied forged parts (mainly rings) for power plant applications to leading OEMs such as Mitsubishi, Toshiba, GE, Hitachi, Fuji, etc. TECHNICAL SPECIFICATIONS General Press Capacity: 2,000 ton System Pressure: 30.0 MPa Pulling Capacity: 1,000 kN (100 ton) at 19.5 MPa Number of Cylinders: 3 Main Cylinder Diameter: 796 mm Press Weight: Approx. 130 ton Stroke & Daylight Stroke: 1,500 mm Daylight: 2,300 mm Table Fixed Table Size: 1,650 mm (R.L) × 2,400 mm (F.B) ...
pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 060 t stroke: 350 mm table surface area: 750x344 mm dayligth: 197/750 mm distance between columns: 750 mm diameter of piston: 75 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 50 t, 1100 mm, 800 mm
Used spotting press, manufacturer Reis, type TUS 80, built in 1999, For more data, see machine map. The sale takes place from the site without dismantling.! The machine was fully functional until the end.
Rotary table press for the production of single-layer concrete panels with 5 stations Pressing force: 900 tons
Manufacturer: REDMER Model: 3-K10/200 Year of Manufacture: 1989 Press Force: 1000 kN (10 Ton) Motor Power: 3.74 kW Find more here - / Contact us at -
Manufacturer: Bobst Model: Flexo 200 Feeder type: Vacuum sheet feeder with pneumatic pressure plate Anilox rollers: All used, ceramic Printing units 1–4: 160 lines/cm, maximum feed volume 8.5 cm³/m² Printing unit 5: 100 lines/cm, maximum feed volume 10.5 cm³/m² Doctor blade system: Ceramic anilox rollers with metal doctor blade Vacuum sheet transport: Yes, 2007 vacuum transport (modified stainless steel suction plate) System upgrades: Sheet cleaning and warm air dryer, both Type 2 200 from DUO-TECHNIK; steam pressure reduction station from Helmut Herbert GmbH The running speed of the system is approximately 4,000 sheets per hour. Spare parts: ST= pieces Bezeichnung Lief.Artikelnr. Bestand BasisME Freilauf FK 24 AP BSA1101010400 2 ST Freilauf FB 44 SF BSA1101047600 2 ST Rutschnabe kplt. M. Kettenrad 16H7 Z20 RN 250M-1/KR 2 ST Reibscheibe RN 250/RS RN 250/RS 8 ST Tell ...
Press modul for production of CLT panels. Used for test production of different CLT and hybrid panels.
From the Gütersloh site, we offer a well-preserved eccentric press Pressure 100 t Projection 330 mm Stroke 10-130 mm Stroke rate 56 stroke/min Plunger adjustment 80 mm Table surface 830x600 mm Plunger area 250x130 mm Table height 870 mm Peg hole in plunger 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm
The machine is in good technical condition, testing is possible after prior agreement. We have a video of the machine available.
Key data: 40 t
Reis TUS 60 40kn spotting press On offer is a used, but very well preserved spotting press of the Reis brand. The TUS 60 40kn model has proven to be extremely reliable and powerful since it was manufactured in 1981. With an impressive 40 tonne locking mechanism, this machine is perfect for demanding tasks. Details: Year of Make: 1981 Tumbler: 40 tons Although used, this machine is in good condition. It is immediately ready for use and a valuable addition to any workshop.
used
Technical data Pressure: 4.5 kN Table surface: Length: 170 mm Width: 145 mm Depth of throat: 100 mm Overall dimensions machine: Length: 380 mm Width: 300 mm Height: 700 mm
Veneer press Bürkle With 2 floors Type S 100 250/130 Panel size 2550 mm x 1300 mm Deck press with 2 shelves Maximum opening between the panels approx. 350 mm Hydraulic Press Cold Press Press force 100 tons. Surface pressure 3.1 kg/cm Number of cylinders 6 pieces Piston diameter 80 mm Rack and pinion guide Rated current 5.4 A Frequency 50 HZ Current type 3 PH Operating voltage 3 PH Dimensions approx. 3350 mm x 1525 mm x H 1845 mm
Briquette press WEIMA C150, year of construction 09/2008, Masch-Nr. 910-483, 5.5 kW, briquette diameter approx. 50 mm, with agitator discharge (only bottom with screw and agitator) 3370x2995 mm, without side walls Machine is fully functional (MP4 video with the machine running on request)
Manufacturer: HSM Model: VK 5512 Year of Manufacture: 2018 Pressing force: 560 kN Find more here - / Contact us at -
Four-column press SP 60 / 670 - Achtermann & Co. Stuttgart -Compressive force 60 tons -Passage between the columns 670mm -Passage between the columns/laterally 400mm - Table size 900x750mm -Height clearance 520mm -6x T-slots in the upper beam -6x T-slots in the table Dimensions: LxWxH 2x1.5x2 meters / Weight 3000 kg
General SKU226P207 LocationBarneveld Make BUCHER-GUYER SA (CH) TypeKHL 50 No.70903 Pressure Working pressure0.51 Bar Main Features Size length500 mm Sizes width500 mm Stroke290 mm Specified Features - Laboratory press Laboratory presscheck Stroke+/- 290mm Upper plate dimensions500x500mm Dimensions lower plate500x500mm Number of platens2 Column presscheck Number of columns:4 Column diameter60mm Electric heated platens(2x)1720watt Platens can be cooledcheck With hydraulic unitcheck Motor2,2 KW, 220/380 Volt Electric capacity18 KW Information Year of construction1979 With switchgearcheck Floorspace2,3x1,4 M Total height2,7 M Weight2600 KG Extra Specificationspressplate size: 500x500 mm press force: 50 Mp press force at 200°C: 5 kp/mm² press force at 250°C: 2,5 k/mm² Technical specs Extra informationindicated size is platen sizeLaboratory pressesBucherP ...
used
WMW PYE 250 ton Capacity: 250 ton Depth of throat -- ramcentre: 360 mm Max ram adjustement: 500 mm Drawning speed: 200 mm/sec Returning speed: 110 mm/sec Distance between table - ram: 1000 mm Ram area (L x D): 900 x 630 mm Eletric motor (power): 20,5 kW Weight: 8,2 ton
Panel dimensions 2.2x1.25 m The machine is functional, but the cylinders are leaking. The sale is in the condition as it is, excl. Warranty, from our warehouse in Düsseldorf, freely loaded.
Used Used PET Preform ENGEL 21.900 pz/h: Year: 2004 Condition: Good Used PET Preform ENGEL: Model: MacPET 4550-320 maszyna nr 52892 Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 110 More details: https://bottlingscout.com
Used Used Husky preform press: Year: 1989 Condition: Good USED HUSKY PREFORM PRESS Year: 1989 Model: XL225PET Press to 32 cavities Stamp: 31,8 Gr (made by husky in 2010) Safety protections Code: W 95 More details: https://bottlingscout.com
Beutler P96-C630 - Eccentric Press - Mobile control panel - Infinitely variable drive - Clutch/brake combination - Overload protection in the ram - Light barrier - Gooseneck Lamp - Year of construction 1998 Technical data - Pressure: 630 kN - Stroke: 12 - 120 mm - Stroke rate: 30 - 130 rpm - Max. delay time: 96 ms - Projection: 300 mm - Distance table/plunger: 495 mm - Passage between body walls: 270 mm - Plunger area: 450 x 360 mm - Plunger adjustment: 120 mm - Table surface: 800 x 560 mm - Opening in the table: Ø 100 mm - Working height: 880 mm - Min. safety distance: 192 mm - Drive power: 5.5 kW - Operating voltage: 3x 400 V / 50 Hz - Machine dimensions WxHxD: 1800 x 2600 x 1600 mm - Dimensions control cabinet WxHxD: 800 x 1700 x 450 mm - Weight: approx. 5500 kg
Key data: 200 t
Capacity: 2000kN Year: 2017 Serial: 17X00095 Max Daylight: 1700mm Stroke: 1200mm Max Tooling Base Size: 2500x1500mm Max Advance Speed: 200 mm/s Electrical Supply: 415 Volts Phase: 3 Motor Rating: 50kW Continuous Approx. Net Weight: 25,000kg Max. Top Tool Weight: 10,000kg
Dowel and slotted hole drilling machine GANNOMAT JUNIOR 320 LBM very good condition, as good as new, the machine comes from a very small carpenter's shop and was used there very little the machine is in its original condition, it has only been cleaned, the paint has not been touched up this allows slotted holes to be milled and dowel holes to be drilled on 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1993 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible t ...
Joos Veneer Press HP 65/2 Panel size 1100 x 2500 mm ges. Pressing pressure: 650 kN Press height: 400 mm Number of cylinders: 4 Basic dimensions: 2900 x 1300 x 2040 L-W-H Used machine Condition: super Prices: free loading plus VAT
- Brand:AMADEO FARELL - To make bullets - Loading mouth: 1200 x 500 - Tunnel size: 800 x 600 - Motor: 15hp (11kw) - With electrical panel
Briquette press Spänex SHB 250 Year of construction 2019 Briquette size: 72 x 127 mm - 8 square Pressing capacity: 250 kg/h (depending on material) Oil cooler System pressure: 280 bar Total connected load: 14 Kw Control: Siemens Simatic HMI Hours: 7900 Material silo Spänex type R III-F Dimensions: 2.20 m x 2.20 m x 1.80 m (without feet and blow-in housing) Total body height: 3.50 m Including rotary valve and agitator
Key data: 3550 mm, 2250 mm
Frame press Hess Type SPEEDY Built in 1995 Crimping dimension 3550 mm x 2250 mm Insertion depth 100 mm Electric height adjustment of the press cylinders Hydraulic 160 bar pressure capacity Hydraulic power unit 2.2 kW 3 vertical cylinders: 1000 mm stroke, 20,000 N pressing force per cylinder 2 horizontal cylinders: 80 mm stroke, 12,500 N pressing force per cylinder Smallest dimensions without medium pressure beam horizontal 380 mm, vertical 320 mm Dimensions 4500 mm x 950 mm x H 2600 mm Weight 1,800 kg Loading dimensions Length 4500 mm x Height 2450 mm Width approx. 2400 mm
Wemhöhner VOF2-250/2 continuous press line complete from location 98693 Ilmenau OT Langewiesen for sale.
Hydropneumatic mode of operation Profile height: 200 mm under hold-down Max. Punch Height: 150 mm Wither height: 150 mm Weight: approx. 400 kg
ORMA 3-deck press NPC 26/14-3V + Höllenholscher Kühlstern discharge from site for sale.
Slotted Hole Drilling Machine Panhans Type 116 Year of manufacture 1997 With dowel device Two-jaw drill chuck 1-20 mm Table fixed, drilling support movable 1 eccentric clamp on the table Table size 700 mm x 380 mm Maximum drilling depth 145 mm Maximum elongated hole length 240 mm Height travel 135 mm Motor power 1.5 kW Speed 3000 rpm. Weight approx. 200 kg
Hello, We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Hours 15606 Hours Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block replaced) and tested on the fly, in manual and automatic mode. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if ...
Key data: 20 t, 160 mm
Hello, We hereby offer you a used workshop press from Rodkraft, type WP 20F. Manufacturer: Rodcraft Pneumatic Tools GmbH & Co. KG Type WP 20 F Year of construction 2000 Machine No. P18096N Hydraulic stroke 160 mm Pressing force 20 t Machine dimensions 2150 x 960 x 660 mm Transport dimensions 2150 x 980 x 750 mm Machine weight 180 kg Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used workshop press Rodkraft, type WP 20F Area of application and condition: The machine was used sporadically in a company locksmith's shop for squeezing / squeezing bearings, etc. The machine is fully functional and in good condition. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein Gm ...
We sell a WP roll press type Rotamat EN . Bakery condition
Key data: 100 t
For sale is a hydraulic single-column press (C-frame) from the manufacturer Durendus with an adjustable press force of up to 100 T. The machine has a table size of 800 × 600 mm, a maximum installation height of 700 mm and an adjustable stroke of up to 500 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. Here are the technical data of the offered machine: Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Title: Hydraulic Single Column Press - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15–100 T (adjustable) - Max. installation heigh ...
Key data: 100 t
For sale is a used spotting press from the manufacturer Reis with an adjustable press force of up to 100 t. The 4-column press has a table size of 1600 × 1300 mm, a maximum open height of 950 mm and an ejector in the table, making it particularly suitable for spotting, tuning and tool work in mould and tool making. Here are the technical data of the offered machine: Technical data + information: Spotting press – REIS TUS 80-100 Allgemeine Disclosures - Name: spotting press - Manufacturer: REIS - Type: TUS 80-100 - Type: 4-column press - Year of construction: 1998 - Press force: 26–100 T (adjustable) - Retraction force max.: 45 T - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Open height max.: 950 mm - Overall dimensions (WxDxH): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm Hydraulik - Hydraulic pum ...
For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...
SORMEC heat press with: - 3000x1300mm assembled tops - 2 intermediate shelves / 3 load compartments - 6 lower hydraulic pistons, 600m stroke - Hydraulic pistons for blockboard mounted on the 1300mm side - with electric water boiler Machine not compliant with CE regulations, for export VISIBLE INSTALLED AND OPERATING UNTIL JUNE 2026
(1992) 125t Müller Eccentric Press Versatile Mechanical Forming Solution This eccentric press offers a nominal pressing capacity of 125 tons, designed for reliable and efficient mechanical forming operations. With an adjustable ram stroke range of 20–120 mm and an additional 80 mm ram adjustment, the machine provides flexible setup options for various tooling and production requirements. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 3010 Year of Manufacture: 1992 Model: EPR/RH125ST Nominal Capacity: 125t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustment: 80 mm Total Weight: 9,000 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 185 mm
(1983) 125t Müller Eccentric Press Heavy-Duty Mechanical Press Robust Eccentric Press from 1983 with a 125 t nominal force and adjustable ram stroke, ideal for precision forming and heavy-duty production. Technical Details Machine Type: Eccentric Press Manufacturer: Müller Machine Number: 1204 Year of Manufacture: 1983 Model: EPR/R125 Normal Nominal Force: 125t Maximum Nominal Force: 135t Ram Stroke (Adjustable): 20 – 120 mm Ram Adjustability: 80 mm Weight: 8,250 kg Motor Power: 11 kW Operating Voltage: 380 V Safety Distance: 205 mm Brake System: Equipped with an Ortlinghaus auxiliary brake system
(1975) 100t IWK Eccentric Press Industrial Eccentric Press for High-Capacity Stamping This 100-ton eccentric press from 1975 features a robust electrical configuration designed for versatile industrial manufacturing. Technical Details Machine Type: Eccentric Press Manufacturer: IWK Model: PEDRS 100 Year of Manufacture: 1975 Machine Number: 22/20076/3 Circuit Diagram Number: 911 871 Nominal Force: 100t Mains Connection 1: 380 V, 3-Phase, 50 Hz, 36 A Mains Connection 2: 220 V Max. Back-up Fuse: 80 A Control Voltage: 220 V (AC) / 24 V (AC) / 24 V (DC) Lighting Voltage: 220 V
(1961) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1961 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.174 Seconds Safety Distance: 278 mm Motor Power: 11 kW
(1963) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1963 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height Range (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.154 Seconds Safety Distance: 246 mm Motor Power: 11 kW
(1970) 200t Müller-Weingarten Eccentric Press Heavy-Duty Eccentric Press for High-Capacity Industrial Forming This powerful 1970 mechanical press is engineered for heavy-gauge metalworking, offering a significant 200-ton pressing capacity and a maximum sheet thickness of 28 mm. Technical Details Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: AR 200 Year of Manufacture: 1970 Nominal Force: 200t Max. Thickness: 28 mm Stroke Rate: 32 strokes/min Ram Stroke: 40 – 180 mm Ram Adjustment: 110 mm
(1985) 630t Gräbener Knuckle-Joint Press High-Performance Knuckle-Joint Press This 1985 Gräbener knuckle-joint press is a high-capacity machine engineered for applications requiring extreme force at the bottom of the stroke, such as coining and cold forming. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GKN 630 Year of Manufacture: 1985 Nominal Force: 630t Stroke: 112 mm Stroke Rate: 55 strokes/min Shut Height: 800 mm Tool Holder Adjustment: 80 mm Motor Output: 25 kW Pneumatic Connection Pressure: 5.5 bar Operating Voltage: 3x 380V / 220V, 50Hz
(1973) 180t Gräbener Knuckle-Joint Press Precision Knuckle-Joint Press for Detailed Cold Forming This 1973 Gräbener model utilizes a knuckle-joint mechanism to deliver high pressing force with controlled ram speed, making it ideal for precision coining and embossing tasks. It features a compact design with a 180-ton capacity and is equipped with a 5.5 kW motor for reliable industrial operation. Technical Details Machine Type: Knuckle-Joint Press Manufacturer: Gräbener Model: GK 180 Year of Manufacture: 1973 Nominal Force: 180t Stroke: 50 mm Stroke Rate: 40 strokes/min Shut Height: 305 mm Tool Holder Adjustment: 40 mm Clearance Between Uprights: 390 mm Table Area (Width x Depth): 370 mm x 450 mm Tool Holder Mounting Surface (Width x Depth): 360 mm x 200 mm Tool Holder Shank Hole (Ø x Depth): 40 mm x 75 mm Motor Output: 5.5 kW Motor Speed: 1,450 ...
(1974) 160t Edelhoff Eccentric Press Eccentric Press for Heavy Stamping and Forming This 1974 Edelhoff mechanical press offers a robust 160-ton capacity and a highly adaptable stroke range, making it suitable for a wide variety of industrial metalworking applications. Technical Details Machine Type: Eccentric Press Manufacturer: Edelhoff Model: AZR 160 Machine Number: 8069 Year of Manufacture: 1974 Nominal Force: 160t Stroke Adjustment: 30 – 160 mm Ram Adjustment: 75 mm Stroke Rate: 45 strokes/min Electrical System: 380 V
maximum number of results exceeded
please refine your search
