bending presse used for sale

Diaphragm press Friz type MFP 15/27 • Cover table size (mm): 2700 x 1500

Here are the technical data of the offered machine: Technical data + information: • No-load speed up to 40 mm/sec • Opening speed up to 40 mm/sec • Starting press speed 5–15 mm/sec • Table size/heating plate size 600 × 600 mm • Plunger size/heating plate size 600 × 600 mm • 2 heating plates, electrically heated, up to 250 degrees – as OPTION • Total size approx. 2000 × 1000 × 2800 mm height • OIL temperature monitoring • Automatic lubrication • Free positioning of the plunger • SICK/LEUTZE light barriers 14.1 mm on the front • Circulating oil cooling • Pressure holding valve 0 to 1800 sec. • Rear monitored door • Pressure adjustment from 30 T to 120 T • Travel limitation either by pressure or position • Programming set-up mode, single stroke (adjustable via rotary switch) • Control panel permanently installed in the wall  ...

Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts

FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications Maximum pressure: 9 tons Pressing force: 2.76 kg/cm² Bale size: 650x500x580 mm Power supply: 400V/4kW Year of construction: 1996 Productivity: approx. 3 bales/hr Machine is fully functional, after technical supervision.

Press Schüco Model 290124 Type 2 Specifications: •pneumatic • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Enclosed tool: included (see photos)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 18 S Year of construction: 2013 Serial No.: 116398 Specifications: Pressing force: 18t Engine: 4 kW Connection voltage: 400/50 V/Hz Cycle time: 22 s Pressing time: 12 s Insertion opening: W x H 107 x 62 cm Height from floor: 98 cm Bale ejected: W x H x D approx. 110 x 70 x 70-80 cm Bale height adjustable Bale weight: 120 – 180 kg depending on the material to be pressed Machine width: 152 cm Machine depth: 95 cm Machine height: 197 cm Weight: 850 kg (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113653 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

used cabinet press Manufacturer: Maschinenfabrik Bermatingen GmbH & Co. Type: DIXI 25 S Year of construction: 2012 Serial No.: 1113652 specifications: Pressing force: 25 t Filling opening: 1,200 x 670 mm (W x H) Height from the ground: approx. 940 mm Split egg filling opening: 1,070 x 260 mm Bale size: 1,200 x 800 x max. 800 mm Bale weight: up to 250 - 320 kg Drive power: 5.5 kW Cycle time: approx. 24 sec. Pressing time: approx. 13 sec. Binding: 4-fold - vertical with poly strap Machine dimensions: 1,600 x 1,300 x 3,170 mm (W x D x H) Machine weight: 2,180 kg Transport height: 2,240 mm (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 10 / 2004 Machine No.: 6114.734. S Serial No.: 250143017 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Specifications Maximum pressure: 36 tons Pressing force: 46.75 tons/m² Duct cross-section: 700x1100 x reg mm Bale weight: 380 kg Power supply: 400 V/ 15 kW Year of construction: 2009-2010 Number of ties: 4 vertical Dimensions of the tailgate: 1030x1100 mm Weight: approx. 3.9 tonnes Bale tying: manual

Rotary indexing table with 12 stations Automatic ejector three pressing stages Pressure capacity 1,000 KN Stroke 12-120 mm Stroke rate 30-60 1/min Plunger adjustment 80 mm Total weight 9,500 kg

automatic baler Manafacture: PAAL Type: PACOMAT IS Year of construction: 1993 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Duct format: 700 x 700 mm Filling opening: 800 x 650 mm Drive power: 18.5 kW Throughput: 80 m³/h with additional manual feed hopper Wire passage seen in the direction of pressing on the left side

Press for paper or plastic Pressing pressure 5 tons 400 V 16 A Length 80 cm Width 80 cm Height 2 m

Hand screw press, used Balancier, used Typ/ type: PSHZ 25/I Presskraft / rated pressure: 25 t Hub/ stroke: 250 mm Tischgrösse/ table size: 400x 500 mm Ram: 200 x 500 mm Tischöffnung / hole in table: 140 mm Weight/ weight: 0,9t

Universal stamping machine Max impact power 50 KN Total stroke 80 mm Stroke sequence per hour 1500 Pneumatic Data

Inv. Num. : 6700 Type: 3000 kN Producer: Loire Created: 1992 GO 2008 Parameters: Control system: SIEMENS SIMATIC OP17 Compressive force: 3000 kN Table length: 2495 mm Table width: 1505 mm Maximum distance between the table and the ram (when the ram is low): 1200 mm Stroke: 800 mm Working speed: 64 mm/s

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Hot press Adkins OM 1000 Government machine Baujar 2015

Stock Number: 3785 ECCENTRIC PRESS Manufacturer: PMB, Type: EPFT 100 Machine NO.: 004301, Year of manufacture: 2002 Specifications: Table size 780 x 590 mm Stroke length 8-120 mm Number of strokes per minute 55 Projection 300 mm Operating height 395 mm Total power 7.5 kW Pneumatic clutch. Gear ratio. Hydr. Overuse protection. Weight: 5500 kg

SPECIFICATIONS: 01 Hydraulic press ORMA LS/R-45/13 Dimensions: 4500 x 1300 mm 08 Piston Ø 70 mm 02 Piston with rack-and-pinion plunger Stroke: 200 mm 01 Loading roller conveyor 4500 x 2200 mm 01 Unloading roller conveyor 4500 x 1300 mm (with stop) ACCESSORIES: 01 Generator HF with 40 Kw 01 Double roll gluer 01 Manipulator ELEPHANT 200 kg Length: 4000 mm

Press pressure up to 900 KN Hint: without ripcord

SPECIFICATIONS: Suitable for processing backrests Number of spindles: 06 Speed: 10,000 rpm variable Max. machining depth: 50 mm Bending radius of the working table min - max: 300 - 900 Pneumatic workpiece clamping

SPECIFICATIONS: Installed power (hydraulic pump): 4 Kw Double pump GR2+GR2 14 cm³+14 cm³ Dimensions: 3500 x 1300 x 2200 mm Output per hour: 100 chairs/h Safety precautions

Machine for the production of backrests of chairs.

SPECIFICATIONS: Double frame press for chair production Hydraulic operation Dimensions: 3500 x 1300 x 2200 mm Protective devices Production: 100 chairs/h

Machine type: Toggle press Manufacturer: unbek. Condition: used / good Offer will only be sent if a complete imprint is provided! Price 125 Euro incl. 19% VAT Location Warstein , Germany Reference M-SCH-SCH-0623-6 DESCRIPTION We offer you a used toggle press, see pictures. Another 60 presses on offer. Availability: immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!

I sell a heavy briquetting press RUF RB400. Year of construction 11/2012 Engine power 22kW Productivity Number 400 pcs. Wood briquettes / hour Wood briquette RUF 150 x 60 x 40-110mm (Depends on material) Material moisture up to 15% Nominal pressure 14200 N/cm2 Oil cooler included. Dimensions: 3000 x 1800 x 2000 mm Combined weight 3000kg Equipment on the right - right entrance box. Condition after full remont/500Mtstd warranty as new. Available right away. With full documentation and CE.

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs

Maplan Injection Moulding Machine Model: MTF400/80C 80 Ton Safety distance 162mm Run-on time 81ms Follow-up 5mm Pattern size 510mm x 410mm Touch screen control Year 2010

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs

Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Used tablet press made by KORSCH, model PH 343. New 1977.

Used tablet press made by KORSCH Pharmapress 300 series. Model PH 343. Tablet diameter 6-13mm. 43 stations. 4 pieces available (2 x 1984, 1 x 1989, 1 x 1990)

New hydraulic pump QX61-250/63-100R88 for PAAL channel baler. Can be used in systems with a 75kW motor.

Brand new gear pump, with internal gearing for PAAL Konti, Pacomat channel baling press. Can be used in systems with a motor of at least 22 kW