bending presse used for sale

Wire Bending Machine WAFIOS AG BM 30 – 2017 | Very Good Condition For sale: high-class CNC wire bending machine WAFIOS BM 30, year of manufacture 2017. The machine is in very good technical condition, with low operating hours – ready for operation without additional investment. Key parameters: Wire diameter range: 2.0 – 6.5 mm Working range: 600 N/mm²: 2.0 – 6.5 mm 1,200 N/mm²: 2.0 – 4.5 mm 1,900 N/mm²: 2.0 – 4.0 mm Optional: capability to process wire from 1.5 mm Maximum feed speed: 120 m/min Bending torque: approx. 250 Nm Number of CNC axes: 7 Equipment: Decoiler Safety fencing Drive rollers (3 pairs of feed rollers) Functionality and capabilities: Unlimited rotation angle of mandrel axis and bending shaft Precise bending head operation (vertical and lateral movements) Possibility to extend functionality (e.g. CNC support plate) High pro ...

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Dimensions in the pictures -Tool: for press brake -Tool: with radius 1500 mm -Beading height: 8 mm -Tool gap: 2.5 mm -Tool: is guided -Tool intermediate dimensions: 900 mm -Transport dimensions: 1200/200/H230 mm -Weight: 210kg

Base for press brake tool, bending tool, die, bottom knife, lower tool, prism tool, reversible prism, 1-piece die block for die bending machine, die tool, folding tool -Support for bending tool: from Promecam STPC 250 40 121 press brake -Length: 4200 mm -Dimensions: see drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 kg

Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Manufacturer: Betschke Wegerhoff, lower tool: for press brake 4 pieces -Total length: 3320 mm / 3 x 835 mm 1 x 815 mm -Prisms: 12 mm x 37° / 8 mm x 35° -Dimensions: see drawing in the photos -Transport dimensions: 835/290/H65 mm -Weight: 77 kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts -Length: 3x 1050 mm -Dimensions: see drawing in the photos -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg

Pressing tool, sheet metal former, forming tool, bending tool, folding tool, bending tool, die, die-casting tool -Bending tool: Pressing tool for press brake / press, 5 pieces -Length: 2x 300 mm / 1x 275/200/175 mm each -Groove width: 58/52 mm -Angle: 90° Dimensions: see photos / technical drawing -Price/Fee: complete -Transport dimensions: 450/300/H115 mm -Weight: 48.3 kg

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, hand-operated -Max. sheet width: 1600 mm -Max. sheet thickness: 2 mm -Roller diameter: 90 mm -Dimensions: 2000/1125/H1370 mm -Weight: 405 kg

Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Roll bending machine: 3-roll roll bending machine, electrically driven -Bending adjustment: electric -Max. sheet width: 2040 mm -Max. sheet thickness: 4 mm -Roller diameter: 150 mm -Dimensions: 1080/2880/H1370 mm -Weight: 1770 kg

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC bending machine Type: Biegemaster BM 6,15 Manufacturer: Sperr & Lechner Year: 2016 The bending machine can bend sheets up to a thickness of 1.5 mm steel sheet, in the case of aluminum sheet the maximum thickness is 2 mm. The maximum length of the bent sheet is 6200mm and the width is 915mm. Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

sheet width: 2040 mm plate thickness: 4,0 mm distance between columns: 2100 mm roll diameter: 150 mm total power requirement: 7,0 KW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,95 x 1,0 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Rear roller electrically adjustable - Conical bending - Foot switch - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 500 mm, 500 mm

Manual bending bench, 2 m long, with extendable base frame for installation in transporter

bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 11-axis Finn-Power SG6 12.61 was manufactured in 2010. It features a maximum punching force of 300 kN and can handle sheet thicknesses up to 6 mm. The machine includes a thick turret with 20 stations and an integrated CNC right-angle shear for efficient part separation. If you are looking to get high-quality punching capabilities, consider the Finn-Power SG6 12.61 punching and bending machine we have for sale. Contact us for further details.

Roll bending machine manufactured in 2021. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details.

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

plate thickness: 4 mm plate length: 200 mm total power requirement: 3 kW weight of the machine ca.: 550 kg dimensions of the machine ca.: 1,0 x 0,8 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 260 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop dimension 5600 x 2200 mm weight 8 ton

Faceplate bending machine, profile bending machine, bending machine, angle bending machine, pipe bending machine, ring bender, ring former -Diameter of faceplate: 1330 mm -Clamping disc diameter: 775 mm -For an additional charge: other round shapes can be produced -Geared motor power: 1.5 kW -Speed: 86 rpm -Dimensions: 2440/1330/H1400 mm -Weight: 1420 kg

Offer 26148 Technical data: - Pressure capacity 420 KN / 42 t - Stroke length 0 - 300 mm - Lifting speed 0 - 0.6 m/min - Tool height 200 mm - Bending performance - with prism MW 125 flat approx. 200 x 16 mm - with prism MW 240 flat approx. 200 x 24 mm - Tube bending up to 2 inches - CNC control SIEMENS SIMATIC HMI TOUCH - For angle programming + length programming - Controlled length stop 3000 mm - Various bending tools - Operating hours (read) 1404 h - Drive 400 V / 4.0 kW - Space requirement approx. W 850 x H 1250 x D 1250 mm - Weight approx. 1200 kg

Inv. Num. : 9163 Type: MAH 40/3 CNC Producer: AMOB Created: 2022 Parameters: Diameter of the cylinders: 148 mm Length: 1200 mm Width: 770 mm Height: 1450 mm Weight: 540 kg Hydraulically controlled upper roller feed Can be used vertically and horizontally 3 mechanically driven rollers Side rollers (manually adjustable) Adjustable control pedal 3 standard rollers

This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information.

wire diameter 10-16 mm feed legth 100-250 mm pitch 5x dia. output pieces/min 25-50

wire diameter range 10 mm width of band 100 mm feeding length 250 mm

wire diameter 2-7 mm output - pieces/min 100

Fasti - Round bending machine / type 2040x2mm -GS / Identifier -Roller diameter 105mm -Max. sheet thickness over the entire length 2mm -Footswitch -Safety device Dimensions: LxWxH 3x1x1.3 meters / Weight 1400Kg Hebjvdnahskn Au S Tsl

wire diameter range 0,5 -5,0 mm width of band max 70 mm feeding length max 320 mm output pieces/min max 132 number of slides 5

STIERLI - Bender 300 U / Horizontal bending machine -Year of construction 2011 -CE marking -Max. working pressure 300KN -Stroke length 300mm -Motor power 4 KW -Hand switch -Footswitch -Various matrices -Bending tools -Stop -Documentation Dimensions: LxWxH 1.5x1.2x1.3 meters / Weight 800Kg

dia. range 1-4 mm width of band 20 mm output pieces/min 80-150 feeding length 240 mm

dia. range 0,5-2,5 mm width of band 50 mm feeding length 170 mm number of slides 5 punching power 5 to output - pieces/min 225

Tube bending machine Tubend TB 42 hydraulic new machine - Capacity: 42 × 3 mm - Hydraulic drive - Adjustable stroke - Emergency stop function - Includes 3 tool sets: 33.7 mm, 26.9 mm, 21.3 mm - Documentation available - Connection: 400 V

Key data: 3200 , 8 , 490

The dual servo pump controllde press brake adopts a dual servo drive pump control system. Compared with the electro-hydraulic synchronous press brake, it’s hydraulic synchronization work relies on high-power dual servo pumps and does not need to rely on a throttle valve to control the cylinder. The temperature of the hydraulic oil will not rise during operation, which extends the working life of the hydraulic system. Therefore, this model has the following advantages: electro-hydraulic synchronization, as well as high efficiency, energy saving, quietness, durability and other properties

Offer 26165 Technical data - Two driven rollers, each roller hydraulically adjustable - For bending and conical rolling - Operation of separate control panel, with digital actual value display - and manual operation - Max. working width 1300 mm - Max. sheet thickness at 400 N/mm² without bending - With a bending diameter of 370 mm, 30 mm inside - With bending at bending diameter 370 mm, inside 25 mm - without bending with a bending diameter of 380 mm inside and - Width of 370 mm 45 mm - Upper roller diameter each 300 mm - Side roller diameter each 310 mm - Working speed 4.5 m/min - Drive 400 V / 30 kW - Required space W 5800 x H 1900 x D 2200 mm - Weight 8500 kg

Key data: 6000 mm, 6 mm

Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of construction 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 atü - Column passage: 4100 mm - Max. bending length: 6000 mm - Projection: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance of the tool holding surface: 300 - 800 mm Hydraulic pumps: - Main pumps: 2x 22 kW - Idle flow rate: 2x 153 l/min - Full load flow rate: 2x 33 l/min - Control pump: 0.75 kW Installation: - Footprint WxD: 6960 x 3250 mm - Height above ground: 4100 mm - Underfloor front: 2200 mm - Underfloor rear: 600 mm - Operating voltage: 3x 400 V / 50 Hz - Machine weight: 51000 kg

sheet width: 2050 mm plate thickness: 4 mm total power requirement: 3 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 9273 Type: APK 61 Producer: AKYAPAK Created: 2015 Parameters: Number of driven rollers: 3 pieces Shaft diameter: 61 mm Weight: 1080 kg

Automatic bending center designed for precise and maintenance-free bending of panels and sheet metal. Bending length: up to 1800 mm Material thickness: typically from 0.4 to 3.2 mm ABT system: The ABT (Auxiliary Bending Tool) option allows for up and down bending without the operator having to turn the sheet. SN: 2100889

A hydraulic 4-roll plate rolling machine Promau (Prümau) is available. Working width: 3000mm, bending capacity: 13mm, pre-bending capacity: 10mm, rolls: 4. An on-site inspection is possible.

Offer 26174 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours read 972 h -with - Digital bending angle display + bending angle fine adjustment - With control SIEMENS SIMATEC Touch Panel - Mandrel bending device 4.5 m. with hydr. Withdrawal - Sawing unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6 ,8 , 10 , 12 , 16 , 20 , 22 , 28 , 30 mm , - Partly possibly incomplete

A BPR ring bending machine is available. Shaft diameter: 40mm, max. roller diameter: 162mm, center distance: 300mm, shaft speed: 7.5rpm, max. flat steel bending capacity: 100mm/15mm, max. edgewise steel bending capacity: 60mm/10mm, max. bending diameter: 35mm, machine dimensions X/Y/Z: approx. 950mm/650mm/1400mm, weight: approx. 500kg. An on-site inspection is possible.

A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible.

A Wafios CNC wire and tube bending center is available. Axes: 9, wire diameter range: 1.5mm-8mm, tube diameter range: 3mm-10mm, wire tools: 2.5mm/4mm/5mm, tube tools: 6×1mm, feed speed: 120m/min, feed roller pairs: 3, bending head transverse stroke min./max.: -200mm/200mm, bending head stroke min./max.: -120mm/25mm, bending head orientation: 0°/30°, return length range: 400mm-1300mm, bending moment: 520Nm, upsetting force: 10kN. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2300mm, weight: approx. 5800kg. Documentation available. An on-site inspection is possible.

Ref.Nr. 00928 Name of the system Biegomat Post III 3D bending machine For sale is a Biegomat Post III 3D bending machine for the production of wire and bent parts. The machine is suitable for the flexible production of complex geometries. Manufacturer Biegomat Model Post III Year of manufacture 2001 Condition: Under power Technically Ok Demonstration Remark Bending machine for thin wires 3D bending machine Control: The programming works with G and M codes, all program lines have to be written completely by hand Recommendation: Overhaul of the hydraulics with hose, valves, seals would be recommended

Key data: 1020 mm, 6 mm

Max. sheet thickness: 6 mm steel Upper roller diameter: 150 mm Motorized rear roll infeed Clockwise and counterclockwise rotation via footswitch Safety rope pull switch Conical rounds possible Weight: 1200 kg

sheet width: 1250 mm plate thickness: 1.5 mm roll length: 1270 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 400 kg range L-W-H: 1730 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.