138,030 used machines on RESALE, but how to find them? Machine Search
Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons
Key data: 50 t, 270 mm, 850 mm
Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.
! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!
Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!
! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!
Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1050 mm, H=1240 mm two-tone powder-coated Housing : gentian blue structure (RAL 5010) Extracts : grey-white structure (RAL 9002) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 410 kg As a set, approx. 26 linear metres of bending tools are fully assembled. Available in different sizes and with many accessories!
Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!
! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!
! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!
! KNIFE RETURNS! Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!
Directly from the manufacturer, the original from the patent holder of Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing : black-grey structure (RAL 7021) Extracts : black-grey structure (RAL 7021) Payload per extension 900 Kg Product code: 94032080 Swiss Commodity Code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 lfd meters of bending tools fully assembled. Available in different sizes and with many accessories!
WKS003 Tool cabinet set for bending Directly from the manufacturer, the original from the patent holder of Apfel GmbH. with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm two-tone powder-coated (Trumpf) Case: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 Kg net (475Kg gross) Pre-assembled as a set for approx. 33 linear metres of bending tools. Available in different sizes and with many accessories!
! KNIFE RETURNS! WKS003 Tool cabinet set for bending Directly from the manufacturer, the original from the patent holder of Apfel GmbH. with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm two-tone powder-coated (Trumpf) Case: gentian blue structure (RAL5010) Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 Kg net (475Kg gross) Pre-assembled as a set for approx. 33 linear metres of bending tools. Available in different sizes and with many accessories!
! KNIFE RETURNS! WKS003 Tool cabinet set for bending Directly from the manufacturer, the original from the patent holder of Apfel GmbH. with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm two-tone powder-coated (Trumpf) Case: gentian blue structure (RAL5010) Uyjcshalsf Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 Kg net (475Kg gross) Pre-assembled as a set for approx. 33 linear metres of bending tools. Available in different sizes and with many accessories!
Specifications: Working length: 4100 mm Max. bending power: 10.0 mm Bend: 8.0 mm Diameter upper roller: 310 mm Diameter of lower rollers: 285 mm Hardened rollers hydraulic snap roller bearing Conical bending device Control panel with digital display CE mark Dimensions (length x width x height)): approx. 5100 x 1250 x 1400 mm Weight: approx. 6.2 tons Condition: very good, almost mint condition The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Specifications: 2 castors hydraulically adjustable 3 rollers driven Bending moment: 48 cm/3 Roll diameter: 360 mm Main motor power: 7.5 KW Dimensions (length x width x height): approx. 2000 x 1300 x 1900 mm Weight: approx. 5.5 tons Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.
Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight
Offer 25059 Specifications: - Bending capacity pipe at 45 kg / mm² to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Bending tools , Ø 1/2" R 67 mm, Ø 1" R 67 mm ,
Offer 23250 Specifications: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Max. bending angle 180 ° - Max. bending radius 145 mm - Drive 400 V / 1.7 kW - Space requirement approx. W 900 x H 1100 x D 1400 mm - Weight approx. 600 kg -with - Pipe circular saw - Inside and outside tube end burr device - Pipe collaring device - Without tools
tube diameter: 4-20 mm wall strength: 2 mm bending radius min.: 10 mm bending radius max.: 75 mm bending speed: 35 mm/min pull up length of tube: 2000 mm Control: total power requirement: 7,5 kW weight of the machine ca.: 1,1 t dimensions: ca. 3100x1000x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max tube diameter 76 mm Max Tube thickness 3 mm Max lenght 6000 mm
weight: 200 kg : 931855500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: ja positioning automatic: ja documentation: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible.
tube diameter: 12-54 mm (Kupfer / Edels. mm serial number: EBD 022 99 002 mode of operation: Schneiden/ Entgraden / Re speed: Rollen 450 U/min m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: bis 60 mm weight of the machine ca.: 1,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 75 (800) mm : 60 (750) mm L-beam: 80 x 80 x 8 (800) mm T - beam - web outwards: 100 x 11 (1000) mm Axis diameter: 80 mm work speed: 6,0 m/min Tool diameter: 242 mm total power requirement: 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm L-beam: 20 x 20 x 4 mm flat steel: 25 x 6 mm Axis diameter: 20 mm work speed: 11 U/min total power requirement: 0,2 kW weight of the machine ca.: 80 Kg dimensions of the machine ca.: 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: max. 16 mm square edge steel: 16 mm round bar steel: 16 mm weight: 45 Kg : 180 ° dimensions: 0,4 x 0,4 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: Handbetrieben weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 420 Kg dimensions of the machine ca.: 1600 x 800 x 1200 mm Motorized sheet metal bending machine with: - Foot switch for left / right - manually adjustable rear roller - Hardened rollers - Conical bending - Swiveling top roller - Safety device emergency leash - Documentation currently only in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2070 mm plate thickness: 4 mm distance between columns: 2100 mm diameter of upper rolls: 140 mm total power requirement: KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1270 mm plate thickness: 3,0 mm distance between columns: 1300 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 2,0 mm distance between columns: 1100 mm diameter of upper rolls: 76 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 x 8 mm square edge steel: 12 mm round bar steel: 15 mm weight: 0,025 t : 51 x 31 x 22 cm dimensions: 135 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 (600) mm : 35 (900) mm L-beam: 50 x 50 x 5 (800) mm T - beam - web outwards: 60 x 7 (600) mm Axis diameter: 50 mm work speed: 4,5 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 35 mm : 35 mm bar material dia. max.: 70 x 2 mm rectangle: 60 x 60 x 3 mm flat steel: 60 x 10 mm Axis diameter: 50 mm work speed: 4,3 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,9 x 0,95 x 1,4 m Profile bending machine with: - Foot pedal right/left rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: max. 3 Zoll wall strength: 3 mm pressure: 16 t weight of the machine ca.: 45 Kg dimensions: 0,8 x 0,6 x m : 0,65 x 0,60 x 0,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1000 mm plate thickness: 3,3 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,39 t dimensions of the machine ca.: 1,4 x 0,9 x 1,2 mm Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1070 mm plate thickness: 3,0 mm distance between columns: 1100 mm diameter of upper rolls: 95 mm tube diameter: 140 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,35 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 100 x 5 mm square edge steel: 16 x16 mm round bar steel: 18 mm L-beam: 100 x 8 mm dimensions: 400 x 290 x 280 mm weight: 35 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate thickness: 8 mm pre-bending: total power requirement: 7,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3600x1250x1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 40 mm pre-bending: 32 diameter of upper rolls: 460 mm diameter of lower rolls: 420 mm side roll diameter: 360 mm power capacity: 30 kW min. bending diameter: 1380 mm weight of the machine ca.: 30,1 t dimensions of the machine ca.: 6,3 x 2,3 x 2,6 m 4 Rolls Hydraulic Bending Machine Standard Features: - hardened and polished rolls - complete body made of ST-52 steel - hydraulically opened/closed drop end controlled from control panel - digital readout for side rolls - top and bottom rolls are driven by hydraulic and gearbox. Bottom rolls vertical movements are hydraulic powered - separate control panel - oil cooler - conic bending - in accordance to CE-norm - Warranty 12 months Optional Accessories: - variable speed of rotation (5.858,00 Euro) - material feeding table (5.100,00 Euro) - center support (18.750,00 Euro) - 2 x side supports (15.000,00 Eur ...
tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 30 mm : 30 mm flat steel: 50 x 10 mm L-beam: mm Axis diameter: 30 mm work speed: 6,0 U/min roll diameter -toolpieces: 132 mm total power requirement: 0,75 kW weight of the machine ca.: 0,25 Kg dimensions of the machine ca.: 0,6 x 0,8 x 1,3 m Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
