bending press used for sale

A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible.

working table size: 3000 mm x 1500 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 40 m³/h; pump capacity: 1,5 kW; noise level: 70 Db; heating system temperatur: max. 200 °C; heating system: 16 kW; machine length: 3100 mm; machine width: 1650 mm ; machine height: 1100 mm; weight: 850 kg; Membrane vacuum presses of TF series are specially designed for preheating and shaping of solid surface materials (Corian, Hi Macs, Staron, Hanex, Kerrock and others), as well for acrylic material and for thermoplastic forming. TF series vacuum presses are combined solution of including functions of two separate machines: vacuum press and preheating oven, and this greatly increases functionality of the press.  Thermoforming Preheating and 2D and 3D vacuum forming of thermoplastic and acrylic materials. Production of worktops, sinks, shells, bar counte ...

Pressing area: 3000 mm x 1800 mm; Design: free-standing; Working Area: 1460mm x 2900mm; Number of manual hydraulic cylinders: 4; Pressing pressure per cylinder: 2000 kg; Cylinder stroke: 70 mm; Hold-down: 1; Machine length: 2900mm; Machine width: 900mm; Machine height: 2000mm;

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 480kg;

table size: 3000mm x 1500mm; pressure: -0,85 bar; machine length: 3100mm; machine width: 1450mm; weight: 425kg;

Pressing area: 3000 mm x 1800 mm; Number of manual hydraulic cylinders vertical: 4; Number of manual hydraulic cylinders horizontal: 2; Press pressure: 1500 kg; Machine length: 4000 mm; Machine width: 750 mm; Machine height: 2250 mm; Chassis on wheels, two of which are steeredManual hydraulic cylinders height-adjustableVertical sliding posts

pressing area: 3000mm x 1900mm; pressing units vertical: 3; pressing units horizontal: 2; pressing system: elctro - hydraulic; machine length: 3500mm; machine width: 1000mm; machine height: 2600mm; waight: ca. 900kg;

pressing area: 2550mm x 1250mm; opening: 400mm; heating: elektric; plate surface: ALU - eloxiert; Emergency stop switch: yes; pressure: 80t; number of cylinder: 4; electricity: 32,2A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

Press length: 3000mm; Crimping depth: Pressing elements vertical: 6; Horizontal press elements: Pressure build-up: pneumatic; Press pressure: per cylinder; Cylinder stroke: mm; Hold-down: no; Machine length: 2700mm; Machine width: 1000mm; Machine height: 1400mm; Weight:

pressing area: 2500mm x 1100mm; opening: 400mm; heating: elektrisch; plate surface: ALU - Gold eloxiert; Emergency stop switch: yes; pressure: 65t; number of cylinder: 4; electricity: 22A; machine length: 3500 mm; machine width: 1300mm; weight: 3000kg;

pressing area: 2500mm x 1250mm; opening: 360mm; heating plate top: elektric; heating plate bottom: defective; plate surface: ALU - anodized; pressure: 90t; number of cylinder: 4; electricity: ca. 33A; machine length: 3000 mm; machine width: 1500mm; weight: 4000kg;

pressing area: 3000 mm x 1350 mm; opening: 400 mm; heating: electrically; plate sourface: alu; emergency stop switch: yes / ripcord; pressure: 140 t; number of cylinder: 8; electriticy: 34 A; motor power: 22,4 kW; machine length: 3550 mm ; machine width: 1550 mm;

pressing area: 3000mm x 1300mm; opening: 450mm; heating: electrically / thermo-oil; max. temperature: 120°; plate sourface: stainless steel; press opening: automatically - timer / manual; emergency stop switch: yes / ripcord; pressure: 120t; number of cylinder: 6; electriticy: 36A; motor power: 21 kW; machine length: 3600 mm; machine width: 1800mm; weight: 4500kg;

Pressing Area: 2200mm x1100mm; Aperture: 360mm; Heating: electric; Plate surface: ALU; Emergency shutdown: no; Press pressure: 65t; Number of cylinders: 4; Current consumption: 21A; Machine length: 2500 mm; Machine width: 1300mm; Weight: 2600kg;

Capacity: 40 and 60 kg/h; Automatic start: yes; Oil cooler: Yes; Briquette size: 50mm diameter; Briquette length: 35mm; Tank size: 0.38 m³; Power consumption: 5.5kW; Machine length: 1860 mm; Machine width: 890 mm; Machine height: 1100 mm; Weight: 400 kg;

Capacity: 25 and 40 kg/h; Briquette size: 50mm diameter; Briquette length: 20 - 40mm; Tank size: 0.38 m³; Power consumption: 4kW; Machine length: 1860 mm; Machine width: 890 mm; Machine height: 1100 mm; Weight: 400 kg;

Capacity: 15 - 70 kg/h; Briquette diameter: 60 mm; Automatic start-up: Yes; Oil Preheating System: Yes; Material moisture: max 15%; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 5.5 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg;

Key data: 80 t

DURENDUS 80 T Workshop Press – Single Column Press – 900 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: € 4,990 net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. X-shaped T-slot table top 600 × 900 × 30 mm Pressure adjustment Lateral displacement of the press pisto ...

Capacity: 15 - 55 kg/h; Briquette diameter: 55 mm; Container size: octagonal, diameter 750mm; Hopper height: Dimensions: 1500mm x 900mm x 1065mm (L x W x H); Motor power: 4 kW; Control cabinet: electronically controlled via PLC; Weight: 450 kg; The Nano briquette press is ideal for companies with small production. Due to the compact design, it is also possible to mount the press under an existing extraction system without great effort.

WE ARE SELLING A PRESSTATION WITH A SNAP SYSTEM WITH/WITHOUT ONE CAPACITY, SUITABLE FOR PRESSING RECYCLED RAW MATERIALS! MANUFACTURER - PRESTO GmbH (Germany) Type: SPN15 Year of Manufacture - 2006 CAPACITY - 30 m³ Power - 11 kW Can be sold unpainted or new painted. PRICE ON REQUEST!

PRESSTATION STV1000 FOR SALE OR FOR RENT! Installation STV 1000 Year of manufacture 2016 Dimensions (length x height x width): 3360 x 1561x 1165 mm Pressing force: 300 kN Inlet opening: 1180 x1405 mm Power: 7.5 kW;

For sale or for rent a presstation STV1200 with or without box Technical specifications: Equipment: STV 1200 press station Year of construction: 2009 Dimensions (length x height x width): 3,660 x 1,165 x 1,561 mm Bjbsw S E N Hsqkhkgbeww Pressing force: 320 kN Filling opening: 1,180 x 1,405 mm Pressure piston height: 600 mm Extension piston width: 1,405 mm Pressure clamping depth: 600 mm Power: 11 kW; The station features a Schott Systema+ hydraulic tank hook system! New painted We can Offer 1 or 2 Containers

Key data: 100 t

DURENDUS 100 T Workshop Press – Single Column Press – 1,000 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 5.990 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. X-shaped T-slot table top 650 × 900 × 90 mm Pressure adjustment Lateral displacement of the press pi ...

Key data: 150 t

DURENDUS 150 T Workshop Press – Single Column Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 6.900 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...

PRESSTATION KBW1593 WITH SCHOTT SYSTEM FOR SALE OR RENT! Technical data: Pressing force: 33 t/330 kN; Filling opening: 1,760 x 1,885 mm; Pressing chamber opening: 1,475 x 1,880 mm; Year of production: 2009 Electrical technical parameters: Power: 5.5 kW; Electrical connection: 5 x 2.5 mm² - CEE - plug 32 A; Duration of one working stroke: 55 sec. PRESSTATION CAN WE OFFER WITH 1 OR 2 BOXES.

PRESS DESIGN   drive system: eccentric / crank PRESS FORCES   total force (nominal): 130 to PRESS TABLE   table surface (left-right): 1200 mm   table surface (front-back): 700 mm   thickness of bolster plate: 80 mm SLIDE   table surface (left-right): 750 mm   table surface (front-back): 550 mm   stroke rate (max.): 60 /min SLIDE (MECHAN. PRESS)   slide adjustment: 100 mm   stroke min.: 19 mm   stroke max.: 165 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 525 mm ELECTRICAL SPECIFICATIONS   total power consumption: 11 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1685 mm   space requirements -front/back-: 1910 mm   total height: 3340 mm   total weight approx.: 11000 kg

Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

A four-column stamping press Exner with electronics overhauled in 2011 is available. Press force: 340t, pressure cylinder: 1, pressure cylinder diameter: 380mm, ram stroke: 180mm, stroke adjustment: 100mm, installation height: 400mm, ram diameter: 260mm, table dimensions X/Y: 910mm/610mm, machine dimensions X/Y/Z: approx. 1300mm/1600mm/2950mm, weight: approx. 6500kg. An on-site inspection is possible.

Press force: 135t, bending length: 3000mm, nominal bending length: 2600mm, frame width: 2600mm, throat depth: 250mm, ram stroke: 120mm, working speed: 7mm/s, machine weight: approx. 6800kg. An on-site inspection is possible.

Key data: 180 t

DURENDUS 180 T Workshop Press – Single Column Press – 1,400 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can supply you with this machine from stock or manufacture it from scratch – gladly taking into account individual options. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 8.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral dis ...

Key data: 200 t

DURENDUS 200 T Workshop Press – Single Column Press – 1,500 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 10.750 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of the ...

PRESCONTAINER FOR SALE/RENT LM18 RPK The compactor is suitable for compacting secondary raw materials as well as foodstuffs or other wet waste. Year of manufacture: 2006 Volume: 18 m³ Dimensions of the container (L x W x H): 5800 x 2500 x 2550 mm Filling height without wheels: 1540 mm Compatibility: 370 kN Motor power: 5.5 kW

Press container LM10 ASG Type – LM10 ASG Manufacturer – Ludden and Mennekes Year of production – 2012 Capacity – 10 m³ Power – 4kw

Block Glue Press "Original MÜRO" Mobile undercarriage, Heat air blower: 1100/2150 watts Stack height: 54 cm, press width: 35 cm, press depth: 32 cm Functional with signs of wear 600,00 plus 19% VAT "Original MÜRO" block glue press Mobile base frame, Hot-Air Blower: 1100/2150 Watts Stack height: 54 cm, press width: 35 cm, press depth: 32 cm In working order with signs of wear €600.00 ( Tax free Intra-Community supply / VAT number needed )

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

Table dimensions ( x-y/mm) 5000 x 2500 Slide Dimensions X-Y (mm) 5000 x 2500 Stroke (mm) 1500 Light at T.D.C.(mm) 2000 Shut Height (mm) 500 Accessories shock absorber Cushion number 2 Cushion Area (x-y/mm) 4000 x 1800

Small compactor / crimping device CPD 1.1, Limbacher Maschinenbau GmbH, nameplate not found, (predecessor of container packer CP 1.100)

51,570 liter ice water tank/pressure tank with insulation Material No. V2A Total height 10200 mm diameter 2900 mm Outer diameter 3480 mm Interior surface 2B=IIIC ground Exterior surface 2B=IIIC ground Minimum/maximum operating pressure (HP) 0.4 bar Operating temperature 90 °C Cylinder length 6500 mm Year of construction 1994 dished end/ domed end Cylinder: 15cm insulation 4 x sensors Manhole 440 x 340 oval Underbody: Dished end/domed end with foot ring and crane eye

65,900 liter ZKG tank/ pressure tank/ storage tank LARGE with cooling jacket and insulation Material No. V2A Total height 12400 mm diameter 3000 mm Outer diameter 3480 mm Exterior surface 2B=IIIC ground Interior surface 2B=IIIC ground

Baier GEBA 1/F embossing press, Embossing plate: 70 x 90 mm, Embossed pressure: 600 kg, Work table: 620 x 620 mm, Embossing plate: 70 x 90 mm, Embossed print: 600 kg, worktable: 620 x 620 mm

Press brake manufactured in 2005. This Baykal APH 3110x200 features a bending length of 3100 mm and a capacity of 200 tons. It is equipped with a main motor of 15 kW and has a maximum stroke of 250 mm. If you are looking to get high-quality bending capabilities, consider the Baykal APH 3110x200 machine we have for sale. Contact us for further details.

Laminating press manufactured in 2010. This LIGMATECH MPH 510/25/09 features an integrated assembly line setup with a total length of approximately 26 meters, including an entry section. It includes a cross-transport belt drive, working height adjustment, pre-selection of pressing time, and light curtain safety with 4-way muting. If you are looking to get high-quality laminating capabilities, consider the LIGMATECH MPH 510/25/09 machine we have for sale. Contact us for further details.

It is a used WP bun press type Rotamat CN for sale. The machine is thoroughly cleaned and checked, it works perfectly. The Rotamat CN is suitable for dividing and rounding doughs with a wide variety of consistencies and recipes, e.g. classic roll doughs, mixed and special doughs, pretzel doughs, doughnuts, sweet doughs. The weight range is 30gr. - 70gr. If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates. Price: 1780,--€ ecxl.VAT from stock Straubenhardt (Germany)

Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Hours: 5812 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Climbing tape Length: 7931 mm Belt width: 1400 mm Overall width: 2026 mm Gradient: 29° Speed: 0.6 m/s Materials: paper, cardboard, foil, PET bottles Please note: All technical data refer to the manufacturer's spec ...

Long fence model LZT-UK-20-So Lower piston press for pressing composite components. Max. press force 20 t Press table 1400 x 1000 mm Opening speed 65 mm/s Closing speed 65 mm/s Press speed 2 mm/s Shelf width 600 mm Max cylinder stroke 600 mm Hydraulics System pressure 300 bar Safety distance 404 mm Delay time 202 ms Max weight lower tool 500 kg. 2 pieces of refrigerators GWK teco cs 90.Very good condition immediately available.

Offer 26027 Technical data: - Max. pressing force 32 t - Max. ram stroke approx. 250 mm - Max. installation height 350 mm - Pitch per revolution of the handwheel approx. 48 mm - Stand width / passage approx. 575 mm - Table support surface with 4 diagonal T grooves 575 x 475 mm - Printing plate area 500 x 260 mm - Tool holder at the top 30 mm - Through-hole in the table 200 mm - Space requirement approx. W + D 1000 / 1500 x H 2000 / 2400 mm - Weight approx. 1000 kg

Code: 0374 Brand: ITALPRESSE Model: V/4 Mechanical cold press for wood, panels, doors, furniture, composite materials, technical materials, plastics, aluminium and various other materials Working dimensions 2200 x 1000 mm Platen dimensions: n° 2 platens 1100 x 1000 mm NEW aluminium sheets Option to work on a single table or on separate tables Opening 650 mm N° 4 pressure screws N°2 motors 0,75 Hp each Overall dimensions mm 2550 x 1000 x 1650 h Weight kg 870

Bed dim. approx. 1600x2250 mm; including new bedding for the beds; Has been used in printing blackboards Auction-ID: A1-41994-12