127,295 used machines on RESALE, but how to find them? Machine Search
Pressure test book not available - sold as a free-fall silo Silo 34 m³ volume, payload 50 to, dead weight approx. 4000 kg Diameter 2500 mm, height approx. 9000 mm Outlet with silo butterfly valve NW 250 Inspection Cover NW 500 Blow-in line, vent line
Specifications Maximum pressure: 56 tons Year of Make: 2016 Press force: 3.8 kg/cm² Number of bindings: 5 Channel cross-section: 1100 × 750 × 600÷1200 mm Dimensions of the tailgate: 990 × 1250 mm Bale weight: 250 - 500 kg Weight: approx. 15.5 - 17.5 t Power connection: 3 × 400 V250 - 500 kg Bale tying: automatic Drive power of the main motor 75 kW Nominal current of the main motor 125.22 A Pump capacity 438 l/min Oil cooler 4kW Oil heating 1 kW Theoretical throughput 535 m3/hour Theoretical flow rate to density 20 kg/m - 10.70 tons/hour Theoretical throughput to density 50 kg/m - 26.75 tons/hour Machine in operational condition, in continuous operation. Courtesy, please contact the seller directly regarding this machine tel. 508 115 007
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
Bipel Tiltmaster 120 Press Closing force 120ton Platen size 458 x 458 Opening force 180KN Ram stroke 100mm With vacuum Max. Daylight between platens 200mm Overall dims: 1195mm wide x 1000mm deep x 2000mm high Weight: 3000kgs
equipped with manual crowning and 1 set of flatbed tools; Recently equipped with new control and laser security
Working capacity 103 mkg at speed 180 1/min, max. stroke 60 mm, stroke adjustment 6-60 mm
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 3-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 25 to 80 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package More dough dividers in stock!
Machine number: 896471 Pressure capacity: 5000 kg Throat: 115 mm Plunger strokes: 165 1/min Adjustable plunger: 40 mm Stroke adjustable: 0 - 50 mm Motor power: 0.75 hp Table dimensions: approx. 280 x 220 mm with pneumatic punching tool installed
Length 3120 mm; WILA NS Recording
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-14 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Sub-range 130 to 400 grams/piece Pitch 14 parts Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Many more dough dividers in stock!
with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame
Semi-automatic dough dividing and weaving machine, Bun press Model: Divobun 4-30 NEW sophisticated technology ... already proven many times over! Stainless steel knife with easy cleaning position! with 3 knitting plates Subrange 40 to 120 grams/piece Pitch 30 pieces Machine mobile DGUV V3 tested Connection 400V, 0.75 kW, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm, WxDxH New machine with 2 years warranty + service package Option: other knitting plates Maintenance contract Many more TOP roll presses in stock!
Stroke: 12 mm Compressive force: 28 kN Delay time: 0.063 s min./max. operating pressure: 3/6 bar Table dimensions: approx. 200 x 160 mm
SPECIFICATIONS: Dimensions of the work table mm: 2500 x 1300 Number of pistons: 4 Diameter Ø 90 mm Piston stroke mm: 470 Complete with intermediate plate Operation with water
The press is function with two adaptor Pressing force max. kN 1800 Pull-off force max. kN 1500 Counterholding force kN 1200 in pressing position Upper punch stroke mm 220 Filling height max. mm 180 Pull-off travel max.mm 90 Pressing path max. mm 90 Distance of upper pressure max. mm 18 Drive motor kW 30 Stroke rate (infinitely adjustable) min-1 6-24 Pre-suspension. Distance max. mm 62 (surcharge). Force max. kN 5.3 Total height mm 4700 Total width mm 2360 without electricity Total depth mm 2700 Hydraulic unit Total weight, net kg 17000
Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site.
Machine: 3-level deck press gluing star Brand: Altec Type: EB3P-6/18 B (Vario) Year of manufacture: 2000 CE Specifications: Press length: 3,740 mm Pressing units per floor: 3 places Insertion depth: 1,080 mm Press thickness: up to 80 mm Minimum press length: 400 mm Pneumatic pressing pressure: 25,000 N to 35,000 N at 10 bar Pneumatic hold-down devices: instead of mechanical (was an optional accessory) 18 pieces Pressure beams per working level: 6 x 600 mm Useful stroke: 50 or 80 mm Star rotatable: with hand crank Height: 1,900 mm Depth: 1,680 mm Length: 4,320 mm Weight: 1,700 kg
used
Used Hermetic Press - Plate Press for Concrete Slabs, Terrazzo Slabs, etc. Manufacturer: OCEM Type: OPA850 Year of Make: 1994 with washout system for exposed concrete, flat storage and steel pallets Used hermetic press - slab press for concrete slabs, terrazzo slabs, etc. Manufacturer: OCEM Type: OPA850 Year of construction: 1994 with washing system for exposed aggregate concrete, flat cycle and steel pallets
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
Order number: 121789A Press force: 100 kN Stroke rate: 55 and 82 per min. Ram stroke: 8 - 140 mm Ram adjustment: 80 mm Table dimensions: 1000 x 720 mm with three grooves
Delivery date: 1961 Press force: 63 t Largest sheet thickness: 10 mm Stroke rate: 65 1/min Ram stroke: 8 - 100 mm Lifter adjustable: 63 mm Greatest distance between table and ram at max. stroke bottom, adjustment top, table bottom: 450 mm smallest distance between table and ram at max. stroke bottom, adjustment top, table top: 180 mm for further technical data see nameplates Table dimensions below: approx. 610 x 470 mm top table dimensions: approx. 310 x 260 mm
Key data: 250 t
Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg
for sale - PROFI Hydraulic Workshop Press HF2 30 tons Clear width 560 mm Hand and foot operation Piston stroke 160 mm Cylinder diameter 115 mm Weight approx. 165 kg further models and inquiries to FSA Maschinen AG
Unused, crimping range 15-63mm, maximum aperture 75mm, 53.5 mpa, force 500 T, 3000W
"Lower counter bearing: 200mm Upper counter bearing: 600 mm Max. pressure: 35 kn"
WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm
20,000 LITERS STORAGE TANK/ PRESSURE TANK/ BEER TANK GRESSER CAT NO: 24-0576EUBA MJ UNI KAR Link to product: https://eurolux.de/product/24-0576euba-20000-liter-lagertank-drucktank -biertank-gresser Specifications Surface outside 2B=IIIC ground Manufacturer: Gresser Surface inside 2B=IIIC ground Material V2A (AISI 304) 1.4301 Volume 20000 L Total height 4600 mm Cylinder height 3000 mm Diameter 2700 mm Operating pressure 0.99 bar Operating temperature range 20 C Vertical design Year of manufacture 1991 Number of feet 4 Last Use Food Technical Documentation No Topsoil: Clapper bottom 2 crane eyes Threaded Sockets Tank cylinder: Manhole oval 440 x 430 mm Tasting tap Ladder hooks CIP line DN 40 pulled down with airlocked casing Subsoil: Clapper bottom forward-drawn residual drain pipe with disc valve DN 50 4 fixed feet
Machine number: 0820592 max. load: 25 kN Throat: 90 mm Plunger strokes: 75 1/min Plunger adjustable: 30 mm Stroke adjustable: 2 - 40 mm Motor power: 0.25 kW Table dimensions: approx. 220 x 150 mm incl. The installed punching tool
Machine number: 3140295 max. load: 250 kN Throat: 190 mm Plunger strokes: 80 1/min Plunger adjustable: 45 mm Stroke adjustable: 10 - 100 mm Motor power: 2.2 kW Voltage: 380 V Table dimensions: 555 x 430 mm
HOT PRESS model OMC PL 90 , with diathermic oil heating second hand machine machine worked very very little excellent working conditions , like new CE compliant machine diathermic oil heating via built-in electric boiler heating power KW 9 / 18 for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3000 x 1300 n.06 cylinders diam.mm.85 max. thrust Ton.90 opening mm.400 hydraulic pump motor power Hp 3 n.4 racks for table lifting guide max. thrust 2.5 kg/cm2 total installed power 21 kW volt. 380/50 net weight kgs. 4500
MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..
Double pressing/folding/product pressing single or shingle flow Condition: overhauled, serviced, fully functional, ready for use Min. format: spine 180 x width 140 mm, number of pages (45g/m2) tabloid 8, two-fold/broadsheet 4 Format max. spine 450 x width 340 mm, number of pages (45g/m2) tabloid 128, two-fold/broadsheet 64 Mechanical speed max.: 10000 revs/h
Equipped with 4 uprights and 8 beams and intermediate slats to place a wooden plate. Complete with side table with dimensions: 105x60x80cm and 4x zinc plate (antra) each with dimensions: 226x100cm
Hydraulic Hose Press; Crimping range: 15-63mm, Max aperture: 75mm, Voltage: 380V, Wattage: 3000W, Pressure: 53.5 Mpa Packing size: 780x540x1350 Weight incl. packaging: 280 kg Unused.
Equipped with shrinkage of 6-45 mm; Manual pump; Shrink force 1000Kn; 7 Sets of molds; Completion indicator light; Maximum opening diameter without mold: 50mm; Maximum opening diameter with mold: 40mm; Hydraulic tank capacity: 1L; Hydraulic oil capacity: 0.5L; Unused
Tablet diam./diagonal max. 60 mm with single mould Output max. 1,800 tablets/h with single tool Infinitely variable speed Filling height max. 40 mm Pressing pressure max. 80 KN Without filling shoe, die table, discharge chute and tableting tools (complete replacement approx. 12,000) Contactor control, electrics new in 2009 Sold as a spare parts repository in present condition
maximum number of results exceeded
please refine your search
