bending press used for sale

Tarzan, Working width 65mm, lever length 740mm. Auction-ID: A1-45188-218

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A1-45681-881

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard  ...

Offer 24407 Technical data: - 2 motor-driven rollers - Hydraulic. Feed of the upper roll Pressure capacity 18 t - Shaft diameter 60 mm - Shaft rotation 6 rpm - Roller diameter 215 mm - Bending performance - flat steel R 300 upright 80 x 15 mm - R 300 flat 120 x 25 mm - Square R 300 50 mm - Round tube R 900 100 x 2 mm - Drive 400 V / 1.5 kW - with: - separate control panel with digital display + foot switch - right / left – run - Lateral straightening rollers - Standard bending kit for flat and angle material - Weight approx. 1200 kg - Space requirement approx. W 1000 x H 1750 x D 1250 mm

Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-45761-892

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions L x W x H 400 x 290 x 280 mm Weight 35 kg Auction-ID: A7-45761-869

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 220 C Year of manufacture: 2012 Edge thickness: approx. 0.4 – 6 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 10 – 11 m/min Control: Electronic control panel (Brandt / HOMAG) Infeed: Manual infeed with driven conveyor chain Edge magazine: Rotary edge magazine (visible) Processing units: - Pre-milling unit - Gluing unit (hot-melt) - End trimming unit - Trimming unit - Radius scraping unit - Buffing unit Extraction: Extraction hood with multiple connections Glue system: Hot-melt glue application Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 16 A Full load current: 14 A Control voltage: 24 V Machine number: 0-261-09-2410 Remarks: Compact single-sided edge banding machine for straight edges with standard processing units ...

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 430 C Year of manufacture: 2014 Edge thickness: approx. 0.4 – 8 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 11 m/min Control: Electronic control system (Brandt / HOMAG control) Processing units: Pre-milling, gluing unit, end trimming, trimming, radius scraping, buffing Glue system: Hot-melt glue unit (EVA / optional PU) Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 20 A Full load current: 18.5 A Control voltage: 24 V Machine number: 0-261-04-6048 Remarks: One-sided edge banding machine for processing straight edges with automatic edge feeding and post-processing units; suitable for industrial woodworking applications :contentReference[oaicite:0]{index=0} Approx. own mass: 1700 kg Approx. dimensions (LxWxH): 4800 x 1200 x 1600 ...

sheet thickness: 1.25 mm, 400V power supply, additional stones, left and right rotation, speed ​​control, pressure: 40 kp/mm², machine visually refreshed, ready for operation Auction-ID: A7-45896-1

UD = double bending; complete with set of tools; CNC controlled backgauge; hydraulic top clamping Auction-ID: A1-45793-1

including various tools; Extra option profile bending unit Auction-ID: A1-45793-25

Edge banding machine for sale by purchasing new machine. Machine is currently still in use and still fully operational. It is a very solid machine with return system included. Very stable and always with the right finish! Equipment: Nozzles Format cutters with a diameter of 100mm Blow-off unit Heat unit PUR bonding with warming station for cartridges Pressure rollers 7pcs Hacksaws, straight and angled Brutfmilling top and bottom profile milling radius 1/2mm Scrapers profile/flat Nozzles Brushing brushes -Machine with bottom and top belt (very stable). -Height adjustable at the front (automatic). -Profile milling cutters can be set automatically with program -Cutting saws automatic -everything can be turned on/off via the screen in front -Return options can be operated from the front -------------------------------------------- Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Y ...

Offer 25503 Technical data: - Manual operation + CNC controlled operation - Max. working width 1740 mm - Max. material thickness at 40 kg strength per mm² 0.50 mm - Roller diameter 90 mm - All 4 rollers are motor-driven - Working speed up to 10.5 m/min - Safety Chucks - Swivel control panel with CNC control - E-footswitch - Drive 400 V / 0.75 kW - Space requirement approx. W 2000 x H 1250 x D 850 mm - Weight approx. 850 kg

Key data: 2000 mm, 500 mm, 500 mm

Manual bending bench, 2 m long, with extendable base frame for installation in transporter

EDGETEQ S380 – Edge Banding Machine General data: Model: EDGETEQ S380 Year of manufacture: 2021 Serial number: 0-261-73-9063 Operating hours: 17486 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The EDGETEQ S380 is suitable for high-quality woodworking applications, ensuring efficient and accurate processing in production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40553-13

AMBITION 1650 FC EDITION – Edge Banding Machine General data: Model: Ambition 1650 FC Edition Year of manufacture: 2018 Serial number: 0-261-71-2179 Operating hours: 25189 h Condition: Very good, in working order Weight: approx. 3000 kg Dimensions (L x W x H): 2500 x 1555 x 2300 mm Description: Industrial edge banding machine designed for precise finishing of panel edges. The Ambition 1650 FC Edition ensures efficient and high-quality processing, making it suitable for demanding woodworking production environments. Additional information: For further technical data, please refer to the attached PDF file. Auction-ID: A7-40553-15

Stored in working condition with numerous accessories, digitally adjustable with control box. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17029

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17028

Stored in working condition, buyer must provide transport himself. No elevator available. Auction-ID: A3-43519-17020

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

Pneumatic press, pneumatic press BOSCH type 0840 002 002Fabr. No. 041 Year of construction 1980Compressive force 18 KN = 1,8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 barprojection 100 mmram stroke 70 mmtable surface 245 x 200ram area 45 mminstallation height max. 235 mmClamping pin hole 20 mm with clamping screwCompressed air requirement 5 bar- Press force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger

used membrane chamber filter press / filter press Passavant Noggerath 1200 x 1200 frame size: K1200 / 110 format of the filter records: 1200x1200 execution: unanimously (filtrate derivation by a collective management) material of the filter records: PP material of the membrane records: PP number of the filter chambers: 100 max. / 33 strength of the filter cake: 30 mms mix pack filtration surface: 230 max. / 76m? filtration volumes: 2985 max. / 985 litres filtration pressure in the chambers: 8 cash max. pressure under the membrane: 15 cash max. temperature with filtration: 20 °C max. material of the filter cloth: PP working pressure in the hydraulic cylinder: 400 cash max. dimension of the chamber filter press: Length: 9,786 mms, width: 2,550 mms, height 2,100 mms weight of the chamber filter press without mud: 18,210 kg of MAX hydraulic oil: OH-HM 32  ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800 x 800 Plate size: 800 x 800 mm Chamber number: 100 pieces Filter pressure: 15 bar

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 (Mix) Plate size: 1200 x 1200 mm Membrane plates: 54 pieces Chamber plates: 55 pieces Membrane pressure: 15 mm Filter pressure: 10 bar Closing pressure: min. 350 bar, max. 380 bar Total filter area: 242 m2 Cake volume totalling: 4320 litres Number of filter presses: 2 pieces

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEH 800 x 800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 20 mm Filter pressure: 15 bar Closing pressure: Min. 240 bar / max. 300 bar Total filter area: 64 m2 Cake volume totalling: 640 litres

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 80 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 30 mm Useful length: 3500 mm Chamber number: 58 pieces Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Total filter area: approx. 1.8 m3 Expiration: closed Plate material: PP Filter cloth cleaning system: optional Filter cloths: optional

used chamber filter press / filter press Passavant A 1500 record size: 1500 x 1,500 mms benefit length: 10,510 mms chamber number: 160 pieces cake thickness: 30 mms cake contents: 8.4 m3 filter pressure: 16 cash Schliessdruck: 380 volts expiry: unanimously whole filter surface: 614.5 m² engine tension: 380 volts / 50 hertz

Used chamber filter press / filter press Rittershaus & Blecher / R & B 500 x 500 Side holm guided Plate size: 500x500mm Cake thickness: 25 mm Useful length: 2200 mm Chamber number: 47 pieces Filter pressure: 15 bar Closing pressure: min. 220 bar / max. 260 bar Cake volume: approx. 3.9 m3 Total filter area: approx. 17.4 m2 Expiration: closed Plate material: PP Plate transport: manual Filter cloths: optional Pump: Abel diaphragm pump optional

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 71 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: automatic Filter cloth cleaning system: yes Filter cloths: optional Membrane mix package incl. control cabinet, filling pumps, membrane pressure pumps The facility is in very good condition.

used chamber filter press / filter press Netzsch 1200 x 1200 record size: 1200x1200mm cake thickness: 30 mms benefit length: 8,200 mms chamber number: 120piece filter pressure: 15 bars record transport: at the side automatically

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 30 mm Useful length: 5300 mm Number of plates: 72 pieces Filter pressure: 15 bar Expiration: closed Plate material: PP Filter cloth cleaning system: optional Filter cloths: optional

Used chamber filter press / filter press Rittershaus & Blecher / R & B 2000 x 2000 Plate size: 2000x2000mm Cake thickness: 20 mm / 30 mm Useful length: 12000 mm Chamber number: 121 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 320 bar Cake volume: approx. 8.1 m3 Expiration: closed Plate material: PP

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 90 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 118 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used membrane chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Number of plates: 35 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: automatic Filter cloths: optional Product-contacting stainless steel contactee ropes ! The facility is in very good condition.

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 Plate size: 1200x1200mm Cake thickness: 40 mm Useful length: 5300 mm Number of plates: 40 pieces expandable to 51 Filter pressure: 8 bar Expiration: closed Plate transport: automatic Filter cloths: optional

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800x800 Plate size: 800 x 800 mm Useful length: 3500 mm Chamber number: 64 pieces Cake thickness: 30 mm Filter pressure: 15 bar Closing pressure: min. 380 bar / max. 440 bar

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Chamber number: 128 units Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP

Used membrane chamber filter press / filter press Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 15 times !

Used membrane chamber filter press / filter press Rittershaus & Blecher /1000x1000 ( Mix Package) Plate size: 1000x1000mm Cake thickness: 40 mm Useful length: 5500 mm Number of plates: 60 pieces Filter pressure: 8 bar Membrane pressure: 15 bar Expiration: closed Plate transport: manual Filter cloths: optional Membrane mix package The plant is in good condition. The system is available 8 times !

Rittershaus & Blecher / Membrane Filter Press Chamber Filter Press 1000x1000 Detailed Description Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a good condition and 8 machines like this availabe.

The BTS-Drum Crusher is ideal for compacting 30 to 220 Ltr drums / barrels, but also plastic and cardboard drums can be easily reduced to their minimum of volume. In many cases this compacted material can then even be marketed again. The drum press impresses with its ease of use, safe operation and high throughput quality. By crushing these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 24 Ton Machine size: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction rate: 8:1 Cycle times: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB User-friendly lever control Compaction head with spikes to punch the drum to drain out any residual liqui ...