Bending Machines used for sale (62)

Rok produkcji: 2007 Waga: 20,000 kg Maksymalna długość robocza: 2560 mm Maksymalna grubość blachy (stal miękka): 2.0 mm Maksymalna grubość blachy (stal nierdzewna): 1.5 mm Maksymalna grubość blachy (aluminium): 3.0 mm Dodatkowe wyposażenie: podajnik wykrojów, narzędzia

Tarzan, Working width 65mm, lever length 740mm. Auction-ID: A1-45188-218

Max. bending capacity: 300 kN (30t) Cylinder stroke: 250 mm Pressure adjustable from 0-300 kN Tool height: 200 mm Bending capacity:140 x 20 mm for V125; 200 x 18 (19) mm at V200 straightening capacity Wy200 at straightening block spacing 1,000 mm Length stop with several stop flaps Automatic and manual mode possible Weight: approx. 700 kg

Auction-ID: A1-45188-238

Schechtl MA 300\1 electronic bending bench with foot pedal and hand depth stop in top condition with two new bending rails with legal warranty. Performance 1.25 mm Steel/ Alu 2 mm Usable length 3 meters Weight 1.5 tons Foot pedal Delivery possible Net price 13900.plus VAT There is an invoice with VAT shown If you have any questions, please contact us at 0160/7838365

Auction-ID: A1-45239-2154

Roller bending machine Dimensions: LxWxH 0.9x0.6x1.1 meters / Weight 250Kg

El/hydraulic bending machine Auction-ID: A1-44726-27

Trumpf Servo Amplifier New Part

Working width 100mm. Auction-ID: A1-45188-85

Truma Bend V85X 2 meters wide, 2.90 high Year of manufacture 2005 25,000 hours

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A1-45681-881

Offer 26016 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic follow-up control for a complete workflow - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - The lower beam 100 mm - Upper bolster drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Accessories - motorized bending beam adjustment - Backgauge adjustable with handwheel - E-foot button - Space requirement with back gauge - approx. W 3200 x H 1650 x D 2100 mm - Weight approx. 4500 kg

Including various bending dies, on and including 1 pallet. Auction-ID: A1-44726-28

Material width 150 mm, material thickness 0.5 -3.0 mm Colour: green Total power requirement: 380 V Weight: 350 kg Dimensions: 800 x 1200 x 1350 mm Roller diameter: 24 mm Machine number 700257

Auction-ID: A1-45188-30

Workforce: 300 kN/30 t Tool height: 200 mm Stroke length: 0 - 300 mm Bending capacity with prism tool MW 125/240: 200 x 16/200 x 24 mm Bending speed: 0 - 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Footprint: 1250 x 820 x 1120 mm

Auction-ID: A1-41275-21

The all-electric servo bending machine is one of the products with independent intellectual property rights developed by our company. Special high-load screw and guide rail structure, imported bearing installation, high load-bearing capacity, high positioning accuracy, long life, machine tool rigidity, precision retention, and reliability are close to perfection. By introducing advanced design concepts and scientific design methods, the shortcomings that traditional designs cannot avoid have been solved. This bending machine is fast and simple to program, can realize concurrent linkage of multiple axes, fast feed positioning, and significantly improves the efficiency, accuracy and consistency of bending, which is far superior to traditional hydraulic bending machines, and does not require the use of hydraulic oil, is environmentally friendly and pollution-free. Compared with traditional ...

Auction-ID: A1-41990-90

Bending length / working length 2,500 mm Press force / bending force 1,500 kN (≈ 1500 kN) Max. sheet thickness (steel) approx. 2.0 mm Max. sheet thickness (aluminium) approx. 3.0 mm Max. sheet thickness (stainless steel / higher tensile strength) approx. 1.25 mm Max. bending height approx. 300 mm (depending on model) Power / Capacity (Electrical) 24 kW Machine dimensions: 4,050 × 1,600 × 2,400 mm Weight ~ 13,000 kg

machine ready for transport and to be assessed on viewing day PLC program problem Auction-ID: A1-44905-143

TBF controller card Trumpf bending machine suitable for Trumpf bending machine year 1998-2004

Flat bar bending machine >br>>br>flat bar 100 x 5 mm>br>square steel 16 x16 mm>br>round steel 18 mm>br>angle steel 100 x 8 mm>br>Dimensions 0.9 x 0.25 x 0.3 m>br>weight 0.025 t>br> >br>Condition: never used / new (5) Auction-ID: A7-44817-191

DM01 control module for Trumpf Suitable for Trumpf built between 1998 and 2004

Hand bending machine >br>flat bar max. 16 mm>br>square steel 16 mm>br>round steel 16 mm>br>weight 45 Kg>br>bending angle max. 180 °>br>Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-44817-242

DM05 control module for Trumpf Suitable for Trumpf built between 1998 and 2004

Hand bending machine >br>height 100mm>br>weight 60 Kg>br>Dimensions 0.8 x 0.6 x 0.3 m Auction-ID: A7-44817-49

Trumpf Motherboard Control Board DELEM DA 65/69 SNA 4891 Control Motherboard Board DA 65/69 Trumpf bending machine built 2001-2004 including flat screen and front control panel

Hand bending machine >br>>br>flat bar 30 x 8 mm>br>square steel 12 mm>br>round steel 15 mm>br>weight 0.025 t>br>pack size max. 51 x 31 x 22 cm>br> >br>condition: never used / new (5) Auction-ID: A7-44817-161

DM02 control module to Trumpf. Suitable for Trumpf built between 1998 and 2004

Combi-machine, sheet metal roller, bending and cutting>br>bending max. 1 mm.>br>rollers max. 1 mm.>br>cutting max. 1 mm.>br>width of segments 25 - 50 - 75 - 75 - 105 mm.>br>Maximum working width 305 mm.>br>diameter of rollers 38 mm.>br>Maximum bending angle 90 degrees. >br>condition: never used / new (5) Auction-ID: A7-44817-113

Safety control for Trumpf. Suitable for V50 to V200 without Bendguart.

Flat Steel Bending Machine>br>The following bending tools are included:>br>1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" >br>>br>bending tools diameter 1\" to 3\" mm>br>wall thickness max. 16 mm>br>machine weight approx. 26 Kg>br>pack size max. 0.6 x 0.3 x 0.3 m >br> condition: never used / new (5) Auction-ID: A7-44817-171

gebr. CNC press brake Darley, type EHP 200, built in 1989 Press force: 2000kN Working width: 5200mm Power: 15kW Oil capacity: 160l Weight: approx. 20,000kg Tools & Accessories Included

Combined sheet metal processing machine with:>br> bending, tool widths 25 - 50 - 75 - 150 - 200 - 250 - 300 mm.>br> rolls, roll diameter 42mm>br>- shears, max. 1015 x 1mm>br>>br>material width 1015 mm>br>material thickness 1 mm>br>speed by hand >br>weight 0.25 t>br>Dimensions L x W x H 1.4 x 0.6 x 0.75 m>br> >br>Condition: never used / new (5) Auction-ID: A7-44817-65

Key data: 100 t, 215 mm, 3100 mm

Ref.Nr. 00882 Name of the system: Used press brake Manufacturer: Beyeler Model PR4 1000 KN x 3100mm Year of construction 2000 Machine hours Not visible Power 100 tons Working range 3100mm DNC 80 control system Mains voltage 400V Connected load 5.5kW Machine weight 7000 kg Mains Frequency/Frequez 3~50Hz Max Pre-Fuse 20 AT Max Compressed Air 8Bar Max closing speed mm/s 200mm/s Pressing speed 1-10 Max stroke 215mm Max stop time 110mS Min safety distance 350mm Technical condition Fully functional

Pressure 20 t>br>stroke 200 mm>br>table size 550 x 550 mm>br>Working speed: 10 mm/ sec.>br>Working height 940 mm>br>Tool height max. 200 mm>br>Total power requirement 2.2 kW>br>Bending power 200 x 10 mm>br>Weight 650 kg>br>Dimensions 1.1 x 0.6 x 1.22 m >br>Condition: never used / new (5) Auction-ID: A7-44817-16

Offer 25995 Specifications: - Pressure capacity 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm -Max. Installation depth with straightening beam 1050 mm -Max. Installation depth without straightening beam 1400 mm - Lifting speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. W 3600 x H 1400 x D 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening beam 1300 x 400 mm with over - Threaded spindle laterally adjustable rebearings

: neu : ca. 6-8 Wochen ab Auftrag : Türkei : 7300 €: 140.89 €: 10 to: 185 mm: 150x8 mm: 450x900 mm: 150 mm: 60 mm: 10 mm/s: 10 mm/s: 1.1 kW: 915 mm: 900 mm: 450 mm: 1130 mm: 250 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 t, 270 mm, 850 mm

Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D controller. Automatically controlled side stop for convenient machining of your sheet metal parts from single part production to series production.

: neu : 2025 : 090089 : prompt, Zwischenverkauf v : Türkei : 8900 €: 171.77 €: 1 : 20 to: 185 mm: 200 x 12 mm: 480 x 1060 mm: 200 mm: 80 mm: 10 mm/s: 10 mm/s: 2.2 kW: 930 mm: 1150 mm: 480 mm: 1200 mm: 530 kgProgrammable stroke and retraction pointAdjustable speed and pressureManual jog operation and automatic operating modeHolding pins and tools hardened and ground3 holder pinsBending toolManual stop 400 mmFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The HKB series swivel machines are used for bending thin sheet metal. Due to their compact design, they fit easily into small workshops and cover a wide range of applications with their segmented upper tool. With an adjustable angle stopper, these swivel machines are also suitable for the production of small batches. Compact and torsion-resistant Segmented upper tool for many bending options Integrated, manual bend compensation Adjustable angle stop for series production Hands free Foot control of the upper bolster clamp Workspace Working length 1270 mm Sheet thickness (max.) – 400 N/mm² 2 mm Dimensions (length x width x height) 1.6 m x 0.9 m x 1.18 m Weight 330 kg Angle range of the bending beam 135°

: neu : ca. 4 Wochen ab Auftragse : Italien : 20960 €: 402.43 €: 40 to: 250 mm: 200 x 20 mm: 1100 x 620 mm: 55 mm: 4,7 - 9,1 mm/s: 45 mm/s: 45 l: 3 kW: 950 mm: 1250 mm: 900 mm: 1000 mm: 750 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Haeusler Type: VRM HY 4000 x 45 Stock number: 0973 Year of construction: 2001 Bending length: 4000 mm Bending strength: 45 mm Bending (cold): 38 mm Drive power: 100 kW Number of reels: 4 Adjustable rollers: 3 Type of adjustment of the rollers: hydraulic Top roll diameter: 710 mm Underroll diameter: 640 mm Side roller diameter: 520 mm Working speed: 2+4 m/min (up to 8m/min) Machine weight (with roller): 78 t Accessories Electronic synchronization Air-cooled oil cooler Upper support device Side cylinder support device (10t) Inlet table (20t) hydr. Bubble storage Cone bending device

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21900 €: 420.48 €: 80 to: 285 mm: 300x25 mm: 750x1425 mm: 300 mm: 105 mm: 10 mm/s: 10 mm/s: 10 kW: 930 mm: 1430 mm: 750 mm: 1450 mm: 1700 kgStroke adjustment with digital displayManual and automatic operation modeTool holder pins and tools hardened and groundBending toolFoot pedalOPTIONS:Cutting-, punching- or pipe bending tools on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We sell on behalf a pipe and profile bending machine of the company Knuth (type KPB 50 ). The condition is AS NEW and has a lot of accessories. Pictures to follow

: neu : ca. 4 Wochen ab Auftragse : Italien : 15330 €: 294.34 €: 22 to: 200 mm: 150 x 10 mm: 1100 x 630 mm: 120 mm: 55 mm: 4,6 - 8 mm/s: 70 mm/s: 45 l: 1.5 kW: 925 mm: 1200 mm: 900 mm: 1050 mm: 630 kg2 holder pins, height 110 mm (higher ones on request)Manual stop 500 mm with millimeter scaleAdjustable speed2 handwheels for adjusting the stroke and retraction pointPrecise hydraulic stroke adjustment, even under pressureTwo-hand operationHuge range of tools, prices on requestALTERNATIVE:Version with CNC controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale we offer a bending machine. It is a Demonstration machine used for prototypes in our production department. Therefore, a few operating hours of approx. 154.1 Bh technical data: Bending force: 40T Bending length: 1600mm Distance between columns: 1200mm Stroke (Y-axis): 150mm Open height: 390mm Table width: 120mm Working speed: 15mm/s Fast speed: 150mm/s Return speed (up): 100mm/s Control axis (8 + 1 axis): Z1,Z2, Z1, Z2, R1, R2+V Power: 5.5 kW Control - Delem-DA-66T (Multilingual) Operating Instructions: English Number of strokes: 10645 Price net: 35.000â?¬ Visit possible by prior arrangement. If you are interested, please contact us.

pressure: 36.0 tstroke: 250 mmflat steel: 200 x 10 mmworking feed: 6.0 - 24.0 mm/minreturn speed: 60.0 mm/minwork height max.: 900 mmtable:: 580 x 1170 mmtotal power requirement: 4.1 kWmotor: 400 Volt 50 Hzoil volume: 60.0 ltr.weight: 1100 kgrange L-W-H: 680 x 1170 x 1130 mm Current list price approx. € 28.000 Special price on requestFeatures:- Electro-hydraulic horizontal bending machine- Large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting- Several/various bending tools- Infinitely variable adjustment of bending speed and pressing force- 1x freely movable double foot switch- Operating instructionsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.