bending 6 m used for sale

Dito-Sama mixer, model: BM20S PNC 601227, number: 19482 0345 002, 380-415 V, 3 Ph, 50 Hz, 750 W, 1.8 A, volume: 20 liter, dimensions: 500 mm x 700 mm x 940 mm.

Grote slicer, model: 613, serial number: 1125094, 230 V, 1 Ph, 50 Hz, 9.8 A, clearance: 390 mm x 330 mm, total dimensions: 1020 mm x 650 mm x 1710 mm. Missing knife.

Submersible pump, Coolant pump, Emulsion pump, BRINKMANN TH 618A590-MVX+215 Q: 80 l/min H: 114 m immersion depth: 590 mm pump foot: Ø 140 mm pump flange: Ø 180 mm Motor: 2,6 kW 2850 rpm 220 - 240 / 380 - 420 V 3AC 50 Hz IP55F New ! Dimensions: 880 x 260 x 185 mm

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox Lenze type: 11.431.10.08.1 -Manufacturer motor ATB type: ERFY 0.55 / 4-7 -Motor power: 0.37 kW -Speed range: 111 to 617 rpm -adjustable -Height of shaft axis: 50 mm -Drive shaft: Ø 16 mm -Number: 2 motors available -Price: per piece -Dimensions: 370/254/H190 mm -Weight: 14.5 kg

Stephan Combicut TC 600 for cutting, mixing, dispersing, heating, cooling, deaerating and emulsifying, type: TC 600, machine number: 714.629, year of construction: 1989, 380 V, 3 Ph, 50 Hz, 71 kW, 145 A, dimensions: 3600 mm x 1600 mm x 2900 mm, Stephan microcutter, machine type: MCH-D40P, machine number: 722.838.01, year of construction: 1996, 400 V, 50 Hz, 2950 rates per minute, dimensions: 1400 mm x 900 mm x 1050 mm, Rittal s/s switch cabinet with Siemens touch screen panel and Danfoss frequency invertor, dimensions switch cabinet: 1200 mm x 600 mm x 2200 mm, peg with some tools.

Alfa Laval milk cream separator, type: HMRPX 618 HGV-74C-50, fabrication number: 4072398, year of construction: 1995, inner bowl diameter: 644 mm, capacity: 30-36000 l/h, dimensions separator: 1800 mm x 1400 mm x 2000 mm, dimensions switch cabinet: 600 mm x 300 mm x 600 mm. Tools are not included.

Treif Maschinenbau GmbH slicer, model: DIVIDER 660+, machine number: 660003.244831.146031, year of construction: 2021, 380/480 V, 3 Ph, 50/60 Hz, 14 A, 7.5 kW, weight: 850 kg, plastic outfeed belt, belt width: 380 mm, total dimensions: 1850 mm x 1000 mm x 2410 mm. Including parts and extra knife.

Treif Maschinenbau GmbH slicer, model: DIVIDER 660+, machine number: 660002.219125.136225, year of construction: 2018, 380/480 V, 3 Ph, 50/60 Hz, 14 A, 7.5 kW, weight: 850 kg, plastic outfeed belt, belt width: 380 mm, total dimensions: 1850 mm x 1000 mm x 2410 mm. Including parts and extra knife.

CFS Bakel B.V. forming machine, type: MLF 600, machine number: 800, year of construction: 2004, 400 V, 3 Ph, 50 Hz, 48 A, 23 kW, weight: 1782 kg, dye: (6x) 235 mm x 35 mm, total dimensions: 2400 mm x 1200 mm x 2600 mm. Incomplete.

Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW ...

Electro-hydraulic. Mandrel bending machine make TRANSFLUID type DB 628 ST SPSMasch. -No: 7507/2/2000 year 2000Technical specifications:Pipe diameter 6 - 30 mmMax. Wall thickness 2 mmSolid material up to 20 mmBending radius min. 10 mmBending angle up to 190 °Bending time at 90 ° 3.0 sec.Mandrel length / pipe pushing length 3000 mmRadius range max. 85 mmBending height 1050 mmfreestanding bending head 850 mm lg.Head for clear width between 2 bends of 300 mm distanceNominal pressure 250 barOperating pressure 200 barDrive power 2.2 kWDimensions L x W x H 3500 x 900 x 1300 mmWeight approx 800 kgWith- PLC control, bending process semi-automatic or manually selectable- Storage of 500 tubes with 20 different positions each- hydraulic drive, right-bending- Triggering optionally via foot or hand switch- Bending direction clockwise, hollow shaft for small radii- Tool reset by hand, hydraulic count ...

Transfluid EDB 642CNC Tube Bender Year 2020 ROUND TUBING MILD STEEL 1.65" X 0.118" ROUND TUBING STAINLESS STEEL 1.65" X 0.059" MAXIMUM MOMENT OF RESISTANCE 3.4 CM3 (S235) BENDING ANGLE UP TO 180 DEGREES +10 DEGREES SPRING BACK BENDING TIME MAXIMUM 180 DEG./SEC (FRONT FEED) SPEED OF FRONT FEED 1600 MM SEC SPEED OF ROTATION MAXIMUM 450 DEGREE/SECOND REPETITION TOLERANCE BENDING +/-0.05 DEGREES REPETITION TOLERANCE LENGTH +-0.05 MM REPETITION TOLERANCE ROTATION +/-0.05 DEGREES ARBOR LENGTH/USABLE LENGTH 120" RADII MAX. 6.61" BENDING HEIGHT 45.27" BOOSTING FORCE LENGTH POSITIONING 2.5 KN APPROXIMATE DIMENSIONS 296" X 63" X 63" APPROXIMATE WEIGHT 12,100 LBS. EQUIPPED WITH: TRANSFLUID CNC CONTROL WITH WINDOWS 10 OPERATING SYSTEM AND 22" WIDESCREEN MONITOR SERVO ELECTRIC POWER BENDING AXIS SERVO ELECTRIC POSITIONING OF THE ROTATION LENGTH ALL OTHER AXIS SERVO ELECTRIC  ...

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m

- Pipe diameter 6 - 28 mm - Wall thickness max. 2 mm - Bending radius 2 x D - Bending angle max. 190 - without tools

sheet width: 610 mm plate thickness: 1,0 mm distance between columns: 620 mm diameter of upper rolls: 38 mm total power requirement: Handbetrieben weight of the machine ca.: 40 Kg dimensions of the machine ca.: 950 x 270 x 360 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic rebate bending machine FASTI Type 606 - 11 - 1.0 Folding machine for sheet metal folding Pre-bending For making a rebate bend Fabr. No. 9166002 Year of construction 1991 Working length: 1100 mm Material thickness at 45 kg/mm² 1 mm compressed air requirement 6 bar - pneum. Foot switch roller lining via threaded toggle screws Space requirement L x W x H 1600 x 300 x 1050 mm Weight approx. 250 kg good condition The fold is the doubling of the sheet in the edge area, i.e. 1x turned over to increase the rigidity of the sheet. The envelope creates a rounded edge, which reduces the risk of injury by cutting at the sharp edge of the sheet. Ideal for sheet metal processing of sheet metal furniture, cladding panels or for ventilation and silencer construction.; used

Bending capacity: 6-42mm, connected load: 4kW.

Inv. Num. : 5263 Type: DB 642 ST Producer: Transfluid Created: 1999 Parameters: Minimum tube diameter: 6 mm Maximum tube diameter: 42 mm Maximum bending angle: 190 h Machine height: 1150 mm Machine length: 4000 mm Machine width: 650 mm

AYEL-TECH MAGNETIC FOLDING MACHINE TYPE 650E -Capaciteit 650 x 1.6 mm -Voetbediening -Measure 4 sets -Documentatie -230V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Profile bender, bender, angle bender, tube bender, ring bender -Manufacturer: self-made -Motor: 0.25 kW/20 rpm -Rollers: Ø 177/116 x 70 mm -Roller spacing: 145mm -Dimensions: 660/510/H1670 mm -Weight: 186 kg

Machine will be sold with all tools from 32 mm to 63 mm Mandrel lenght : 2500 mm

pressure:10 t table::350 x 350 mm stroke:10 mm Description: Rotary embossing machine, for labeling or identification of parts like flanges or tubes as for flange descriptions for example ( pressure, material, nominal diameter.. ) The machine is new and unused Made in Germany incl. charsets and symbol set under power Original price in 2007 : ? 33.500,--

Bending machine FAVRIN 3100×30 PHLS CNC (A3708) Type: hydraulic Max worklength: 3100 mm Eletric motor (power) 75 HP Courant needed 380V Weight 32 ton Machine was previously used to bend Hardox workpieces. bending capacities examples: – 3100 x 25 mm > multi stage bending for large radiuses – 2500 x 30 mm > multi stage bending for large radiuses – 3100 x 17 mm > single stage bending – 2500 x 25 mm > single stage bending full CNC corner + backgauge control upper hydraulic clamping of tools clamping force: 220 ton max bending angle: 110° max open: 500 mm Tooling included for radius bending Also 2 new extra cilinders included

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 36800 € : 747.04 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, b ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 35000 € : 710.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 0,75+1,1 kW : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the ...

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm Tracto Technik - TUBOMAT 642 Tube bending center Ø 6 - 42mm bending / cutting / deburring / flairing MACH - ID 6326 Make: Tracto Technik Type: TUBOMAT 642 Max.Tube Ø    42 mm Min. Tube Ø     6 mm Max. Wall thickness       3 mm Max. Bending radius     180 mm Min. Bending radius      10 mm Max. bending length       3.000 mm Deburring attachment      Yes Sawing attachment          Yes Flair attachment               Yes Power                               1, ...

4 ROLL HYDRAULIC MODEL 1000 x 22mm CNC EVO GRAPHIC 4AXIS PROG PLATE BENDING ROLL PLANETARY DOUBLE PRE-PINCH PLATE PRE-BENDING capacity: -Width of plate: 1000 mm -Thickness of plate rolling 22 mm -Thickness of plate pre-bending 16 mm minimum bending diameter ID 280 mm depending on the plate thickness vs. yield strength Rolls -Surface length mm. 1050 -top roll mm. 250 -lower roll mm. 260 -Power electric 15Hp on centralized hydraulic unit , voltage 3ph Vac 400/50 Configuration installed • Hardening of the 4 rolls , very high resistance against wear. • Central rolls both driven powered with axial gearbox and direct drive hydraulic motor. • Calibration system for the re-rolling of welded shells rounding unwanted flat spots. • Console electric on wheels with centralized commands joysticks CNC position r ...

4 ROLL HYDRAULIC MODEL M2008 EVO_4.0 CNC GRAPHIC CAD-CAM Machine serial number 2022 PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING Capacity -Width of plate: 2000 mm -Thickness of plate rolling 8 mm -Thickness of plate pre-bending 6 mm -top roll 190 mm -lower roll 170 mm minimum rolling shell ID 220 mm -Power 5,5 Hp to run the hydraulic unit Voltage 400/50 – 480/60 -Weight of the machine 3400 Kg Configuration installed Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling Dual pre-pinch, with adjustable force upon the input of plate thickness Conical bending hydraulic attachment - hardened contrast pad. Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. Calibration system f re-rolling of welded shells rounding. Console electric in ...

Outside diameter maximum: 90 mm Inside diameter maximum: 5 mm Pipe length maximum: 195 mm Angle degrees maximum: 40 Wall Thickness: 7 mm CNC Brand: _Unknown / Other CNC Model: CNC TOUCH Tube bending machineMacri - Provar 5 - 90 UD Controlled 5 axis A,B,Z,X,Y Axis Y,X,Z,B Accuracy 0,1 Gr Y, X, Z, B Maximum speed 6 M/Min Large tooling package with collet and die blocks Tooling 25.4 / 26.7 / 31.7 / 33.7 / 38.1 / 42.2 / 46.3 / 48.3  Tooling for steel & stainless steel  Max.Tube Ø:        90mm Min. Tube Ø:       5mm Max. Wall thickness:7mm Max. Bending radius:195mm Min. Bending radius:5mm Max. bending length:3600mm Length:            6000mm Width:             2400mm Height:            2400mm Weight:  &nbs ...

Plate bending roll Capacity 3000x75 mm MG model 4ROLL Hydraulic machine with double pre-pinch -plate width up to 3000 mm -plate rolling thickness 75 mm Prebend 55 mm Tightest bending dia ID 800 mm Rolls length 3100 mm Upper roll 680 mm Lower roll 620 mm hydraulic unit power 100 Hp Hardened surface of the 4 rolls Pre-pinching with adjustable load to perform best roundness on edges Driven rolls powered with gear units axial and hydro motors each Cone plates bending, hydraulic conical plate rolling Electric commands joysticks and position readout with 4 axis cnc Drop-end hydraulic front open to unload closed shells. Digital readout of the 4 bending rolls. Variable speed rolling control. Central support can be added to support large dia. Shell forming Side arm can be added to hold in place think plate sheet being formed Weight of the machine ...

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

: gebraucht : 2022 : 9632 : prompt, Zwischenverkauf v : Italien : 2900 € : 1 : 38 mm : 245 mm : 300 mm : 320 mm : 23 kg : 19 cm³ : 38 x 1,5 mm : 38 x 1,5 mm : 35 x 3 mm : 30 x 2 mm : 35 x 1,5 mm : 42 x 1,5 mm : 42 x 1,5 mm : 50 x 2 mm : 50 x 2 mm : 50 x 4 mm : 20 mm : 10 x 25 mm : 25 x 20 (stehend), 25 x 1 mm : 180 mm : 36 mm : 10 mm : 2,8 U/min : 0,9 kW / einphasig kW DEMO MACHINE - MINT CONDITION digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools (sample photo) OPTIONAL EQUIPMENT: tripod € 220,- ALTERNATIVELY ALSO AVAILABLE AS FOLLOWING MODELS: (Time of delivery approx. 6 weeks) MD 071M (faster version) € 4.140,- MACHINE KIT WITH TOOLS: (time of delivery a ...

Outside diameter maximum: 50 mm Inside diameter maximum: 6 mm Pipe length maximum: 4500 mm Angle degrees maximum: 0 Wall Thickness: 3 mm Transfluid - DB 648K Tube bender Ø 50 x 4500 mm MACH - ID 6314 Make: Transfluid Type: DB 648K YOP: 1998 Max.Tube Ø   50 mm Min. Tube Ø    6 mm Max. Wall thickness     3 mm Max. Bending radius    125 mm Min. Bending radius     10 mm Max. bending length     4.500 mm Power      1,5 kW Number of tools      2 Dimensions Length      5.600 mm Width         800 mm Height     1.550 mm Weight     700 kg

Outside diameter maximum: 42 mm Inside diameter maximum: 6 mm Pipe length maximum: 3000 mm Angle degrees maximum: 0 Wall Thickness: 0 mm MACH-id    5390 MAKE        Tracto Technik TYPE          TUBOMAT 642 YOP            2008 SPECIFICATIONS Max.Tube Ø        42 mm Min. Tube Ø        6 mm Max. Wall thickness         4 mm Max. Bending radius       84 mm Min. Bending radius        2 mm Bending length           3000 mm Deburring attachment          yes Sawing attachment          yes Flair attachment       yes Power                  ...

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working length: 2050 mm Round bending: 5 mm Bending: 4 mm Top roller: Ø 150 mm Under-roll: Ø 225 mm Equipped with: - Profile iron bending device - Sentences Profielrollen -Operating instructions Motor power: 3 kW Machine LxWxH: 3300 x 1050 x 700 mm Machine weight: 2000 kg

CNC Plate Bending Roll Year 2021 Approx. 100 hours Number of Rolls 4 Rolls length 10’ 2” Top Roll diameter 18.2” – less deflecting thanks to Planetary Guide Technology Bottom Roll Diameter 16.6” Side Rolls diameter 14.2” Smallest possible diameter 21” thank to planetary guide technology Rolling Speed 20 ft/min (imperial) Installed power HP 72 (Energy Saving Technology) Power Supply V., 60 Hz Rolls material High resistance, heat treated, tested & certified Carbon Steel Rolls Hardening Induction surface up to 48 – 62 HR Rockwell C, according to Customer’s application and rolls materials Rolls Periph, Speed compensation Automatic (no torque loss, no operator setting needed) Rolls Crowning Top and lower (clamping) rolls are standard crowned to compensate Rolls deflection Rolls guiding Friction-free, mill-scale-proof, lubrication-less planetary guides R ...

Mot. - Ring - Bow - Bending machine Offer number: 15252 Make: KNUTH Type: MSB 30 Machine No: 121217 Built: 2000 Technical data: - horizontal working position - 2 mot. driven rollers - manual vertical delivery of the upper roller - Lifting top roller up to 30 mm - Shaft diameter 40 mm - Wave length 35 mm - Wave rotation 12 rpm - Roll diameter 76 - 88 mm - Drive 400 V 1.1 kW - Bending power approx. - Round tube 30 x 1.5 mm - Flat steel 30 x 10 mm - E - foot button for right / left - run - Round tube roller set approx. 23 mm - Weight approx. 150 kg - Space requirement approx. W 700 x H 1150 x D 650 mm

: R10-R260 : 210 ° bending speed: 2 U/min : 1 1/4 x 3,5 mm : einphasig - 230 V drive motor: 1,1 kW : < 70 dB weight of the machine ca.: 80 kg dimensions of the machine ca.: 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm weight: 1050 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 kN stroke length max.: 235 mm : 200x24 mm bending capacity max. - round: 60x4,0 mm toolpiece height max.: 250 mm : 660x1250 mm work height max.: 900 mm return speed: 20 mm/sec working feed: 10 mm/sec total power requirement: 3 kW weight: 950 kg Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 200 kN stroke length max.: 200 mm working feed: 10 mm/sec return speed: 20 mm/sec : 480x1060 mm work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200x12 mm bending capacity max. - round: 48x4,0 mm weight: 500 kg Overall size: 1010x480x1120 mm Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 mm, R = 5 mm - Quick change monometer 85 °, H = 200 mm, V = 63 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I-beam section - flat steel: 220 bei Dm 1200 mm I-beam section - upend: - mm angular steel - leg outwards: 110x110x14 bei Dm 1000 mm angular steel - leg inwards: 80x80x10 bei Dm 1000 mm flat steel flat: 100 x 20 bei Dm 1000 mm T-steel / side out: 120x120x13 bei Dm 1200 mm U-iron on the x-axis: 22 bei Dm 1200 mm pipes: 102 x 6 bei Dm 900 mm round material: 75 bei Dm 700 mm square material: 60 x 60 bei Dm 600 mm bending speed: 3,5 m/min No. - Rolls: 3 Drive: 7,5 kW shaft diameter: 125/135 mm weight: 6,4 t dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m Condition: ready for operation: Electric 380 Volt: Set of standard rolls: I + H Motorized adjustable rollers: Control panel: Central lubrication: autom. Rolls for round material: 100 mm Machine manual: Heavy ASYMETRIC ring bending machine with mot. adjustment of both infeed rollers and mot. adjustment of the two lateral guide rollers,  ...

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 35300 € : 723.65 € : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4,2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to  ...

Working width: 2000 mm bending capacity: 72.0 mm Bend: 66.0 mm Number of driven rollers: 3 Diameter top roll: 500 mm Diameter lateral underrollers: 420 mm conical bending device by inclination of the two side rollers hydraulic folding bearings Motor power: 56 kW mobile control panel with digital display Net weight: approx. 28 tons

profile bending roll model Femar PF22 year 1985 machine in working condition refurbished mechanical operated motorized electric pinch roll pyramid mechanical operated gear unit motorized electric rolls rotation position bending readout gauge adjustable rollers height to seat and bend the different shape of profiles Capacity ( see chart in enclosed ) angle 120 x13 mm flat bar on edge 120x30 mm flat iron 140x45 mm square iron bar 70 x70 mm T-section 100 mm C-section 160 mm IPE beam 160 mm dimension 2170 x1650 x H 1200 mm 8 ton

: neu : 2023 : 8298 : prompt, Zwischenverkauf v : Türkei : 42730 € : 867.42 € : 1 : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 3800 mm : 2350 mm : 1650 mm : 2500 kg : 1000 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s Grafic control 2D -15,6", touchscreen controller on swivel arm - LBL editor: tabular programming by entering the axes values - 2D part editor: programming by drawing in graphic mode and 2D visualisation - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - autorisiation with password - 128GB HDD allows almost unlimited data storage - detailled alarm, tool and paramter page back gauge 1000 mm with servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, ball casters upper tool in one pice, 20° manual height ...