134,704 used machines on RESALE, but how to find them? Machine Search
pressure: 400 t chamfer lenght: 4050 mm distance between columns: 3550 mm control: CYBELEC ModEva 10 S total power requirement: 47 kW weight of the machine ca.: 30.400 kg dimensions of the machine ca.: 6000x3000x3450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1 Bending tools with excellent value for money Induction hardened, with ground working surfaces Standard lengths: 835 mm, 415 mm and 835 mm (split). For tool clamping systems such as: Amada, Promecam, Euro, Durma, Baykal, Ermaksan, Dener, Trumpf, Wila and many more The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic version Includes pallet with spare parts. Auction-ID: A1-47360-274
Ford Bronco Sport Big Bend First registration: 2025 1.5L EcoBoost petrol engine 184 hp Automatic transmission 4x4 all-wheel drive (All Wheel Drive) Left-hand drive Eruption Green Metallic paint Body: SUV Mileage: approx. 34,700 km VIN: 3FMCR9BN2SRE14654 Vehicle starts and drives (Run & Drive) Well-groomed general condition Vehicle already converted to EU standard (EU conform) Salvage Title / US salvage documents available US import vehicle Fuel: Gasoline Vehicle is sold without warranty Condition according to photos and available documents Auction-ID: A1-49582-2187
consisting of three rollers Working length: approx. 1500 mm Reference: STS - Lot 6 Auction-ID: A7-49882-247
Machine number: 4444 incl. foot switch Reference: Steinbach & Holler - Lot 54 Auction-ID: A7-49882-134
Roundo R4S 30 cm3 Dia rolls: 275 mm Dia of die mandrel: 105 mm Rotationspeed: 1 > 5 m/min Motorpower: 5,5 kW - 8,6 HP Length : 1250 mm Depth: 1250 mm Height: 1500 mm Weight: 3 ton
Flens-/kraalmachine voor de productie van drukvaten, silo´s, opslagtanks, tankwagens en spoorwegtankwagens. Max werkstukdiameter: 6 meter De flensmachine start het buigproces door de rand van het werkstuk netjes tussen twee mallen te plaatsen: één mal is bevestigd aan de bovenste reductiekast en de andere is vrijstaand aan de onderkant. Wanneer de bovenste spindel draait, start het draaiproces en wordt hydraulische cilinder nummer 3 omhoog bewogen. De randen van de gebogen uiteinden worden gebogen door de lineaire beweging van hydraulische cilinders 1 en 2. Dit proces wordt twee of meer keer herhaald totdat de gewenste waarden voor dikte, diepte en diameter zijn bereikt.
pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 400 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/min return speed: 165 mm/sec work stroke: ca. 350 mm dayligth: ca. 660 mm oil volume: 450 ltr. table height: 830 / 950 mm table width: 75.0 / 60.0 mm voltage: 400 Volt total power requirement: 18.5 kW weight: 13440 kg range L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control DNC 880 S swiveling control p ...
pressure: 170 t chamfer lenght: 3170 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 620 mm stroke: 350 mm ajustment speed: 160 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec oil volume: 280 L 0: 300 bar controlled axis: 7 Anzahl Number of working hours: ca. 51.500 h total power requirement: 16.5 KW weight of the machine ca.: 12700 kg range L-W-H: 4550 x 2650 x 3150 mm LONG STROKE special version Excellent condition () Original price approx. 200.000 Euro Special price on request ---------------------------------------------- LONG STROKE electro-hydraulic press brake featuring: Increased daylight opening (installation height) = 620 mm Increased cylinder stroke = 350 mm ---------------------------------------------- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control AMNC - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) Swiveling control unit - front lef ...
: gebraucht : 9313B : prompt, Zwischenverkauf v : 1300 € : 1 : 4080 mm MINT CONDITION with manual crowning with single adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 9313A : prompt, Zwischenverkauf v : 2900 € : 1 : 4080 mm MINT CONDITION manual clamping The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 080242 : prompt, Zwischenverkauf v : Italien : 1890 € : 1 Oberwerkzeug 1033/28°/R 0,6/8 mm 4 x 835mm Unterwerkzeug 3000/U 8 mm 3 x 835 mm + 1 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...
Used industrial OF.ME.R. Mechanics TP 24/28 combined reinforcing steel bending machine, manufactured in 2010. Heavy-duty stationary machine intended for bending reinforcing steel/rebar, fitted with a rotating bending table and interchangeable bending pins/tooling. The machine features a control panel with emergency stop, selector switches and push-button controls, as well as a foot-operated control pedal. Various bending pins, stops and tooling/components are included on the machine as pictured. Electrical connection is via an industrial three-phase plug. Operational condition has not been verified; offered in its current condition as pictured. Auction-ID: A7-50083-27
Druckplatten Biegeeinrichtung für Heidelberg SM52 Format - Plate Bending device Heidelberg SM52 Size Druckplatten Biegeeinrichtung - Plate Bending device NELA GS-Biegegerät Baujahr / Year 1997 - Serial-No. 1144/41 Druckplatten Biegeeinrichtung für Heidelberg SM52 Format Plate Bending device Heidelberg SM52 Size
Mobile pipe bender up to max 2\" Tool for 42mm pipe see pictures Auction-ID: A7-50084-58
Pipe bender - Power 3/8\" to 2\" pipe - Tools for 3/8\" - Incl. base frame see pictures Auction-ID: A7-50084-3
Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40
Sheet metal bending machine with: – Electrically adjustable rear roller – Digital display for the movement of the rear roller – Hardened rollers – Conical rolling – Swivelling upper roller – Brake motor – Emergency stop – Documentation – Connection voltage 400V Sheet width 1070 mm Sheet thickness 4 mm Stand width 1100 mm Upper roller diameter 110 mm Total power requirement 5.0 KW Machine weight approx. 1.2 t Space requirement approx. 2.0 x 0.9 x 1.1 mm Auction-ID: A7-50084-137
Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Flat steel 50 x 10 mm Angle steel mm Axle diameter 30 mm Working speed 6.0 rpm Roller diameter - tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Dimensions approx. 0.6 x 0.8 x 1.3 m Auction-ID: A7-50084-106
Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-50084-46
Used, untested. Including additional tools. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-3
Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-50084-161
Hydraulic Pipe Bender Compressive force 16t 8 pieces of bending elements from 1/2\" to 3\" Condition: never used / new (5) Auction-ID: A7-50084-71
Electric profile roller with - 5 set of rolls 2x for round material 20mm and 30mm, 1x for flat material 1x for square material - Foot switch with emergency stop Round material 30 x 1 mm Square material 30 x 30 x 1 mm Round material solid 16 mm Square material solid 30 x 10 mm Speeds: 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Dimensions approx. 0.82 x 0.60 x 1.26 m Condition: never used / new (5) Auction-ID: A7-50084-61
Material / Max Capacity / Min Radius Flat / 1 1/4\" / 10\" C Channel 1x2\" / 60\" Round Tube 1 1/2\" / 20\" Round Tube 2\"/60\" Diameter of rollers 1 1/2\" Maximum tube diameter 38 mm. Condition: never used / new (5) Auction-ID: A7-50084-173
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Digital display - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Angle steel 20 x 20 x 4 mm Flat steel 25 x 6 mm Axle diameter 20 mm Working speed 11 rpm Total power requirement 0.2 kW Machine weight approx. 80 kg Space requirements approx. 0.6 x 0.6 x 1.5 m Auction-ID: A7-50084-77
Sheet metal bending machine 3 rollers - 2 driven rollers - Footswitch - Emergency stop facility Sheet width 2100 mm Sheet thickness 2.0 mm Stand width 2150 mm Roller diameter 90 mm Total power requirement 1.5 KW Machine weight approx. 0.7 t Space requirement approx. 2.5 x 0.7 x 1.3 mm Auction-ID: A7-50084-84
Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-50084-203
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven Round material solid 35 mm Square material solid 35 mm Gross diameter max. 70 x 2 mm Rectangle 60 x 60 x 3 mm Flat steel 60 x 10 mm Axle diameter 50 mm Working speed 4.3 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Dimensions approx. 0.9 x 0.95 x 1.4 m Condition: never used / new (5) Auction-ID: A7-50084-133
Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5) Auction-ID: A7-50084-206
Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0.025 t Condition: never used / new (5) Auction-ID: A7-50084-191
Electric profile roller - Choice of horizontal or vertical work - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm/1\" - Instruction manual - Footswitch left/right and EMERGENCY STOP Round material solid 30 / 900 mm Square material solid 30 / 900 mm Angle steel 35X35X5 / 600 mm T - Steel - Bridge to the outside 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roll diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Condition: never used / new (5) Auction-ID: A7-50084-50
Mobile base, External control panel, Control panel Auction-ID: A1-50085-6
Flat steel bending machine The following bending tools are included: 1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" Bending tools diameter 1\" to 3\" mm Wall thickness max. 16 mm Machine weight approx. 26 kg Package size max. 0.6 x 0.3 x 0.3 m Condition: never used / new (5) Auction-ID: A7-50084-171
Used, untested. Documentation and instruction manual available. Equipped with automatic stop. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-12
Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out upper roller - Safety device emergency exit line - Documentation - 400V Sheet width 700 mm Sheet thickness 4.0 mm Stand width 720 mm Top roller diameter 95 mm Total power requirement 1.1 KW Machine weight approx. 0.37 t Dimensions approx. 0.95 x 0.76 x 1.25 mm Auction-ID: A7-50084-68
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Mount: Shaft 50mm - With digital display - Hardened special steel shafts - 1 set of standard rollers - 2 driven rollers - Top roller can be hydraulically fed up and down - Horizontal and vertical operation - Motor with brake device Round material solid 35 (600) mm Square material solid 35 (900) mm Angle steel 50 x 50 x 5 (800) mm T - Steel - Bridge Outside 60 x 7 (600) mm Axle diameter 50 mm Working speed 4.5 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.1 x 0.8 x 1.5 m Condition: never used / new (5) Auction-ID: A7-50084-29
Pressure 20 t Stroke 200 mm Table size 550 x 550 mm Working speed: 10 mm/sec. Working height 940 mm Tool height max. 200 mm Total power requirement 2.2 kW Bending capacity 200 x 10 mm Weight 650 kg Dimensions 1.1 x 0.6 x 1.22 m Condition: never used / new (5) Auction-ID: A7-50084-16
Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm Auction-ID: A7-50084-41
Press brake, bending machine, swing bending machine, die bending machine -Swivel bending machine: with opening upper jaw for completely closed bent sheet metal profiles -Manufacturer: LOTZE Type HZ 2500/3 -Drive: mechanical, cam control semi-automatic / bending angle preselection -Max. working width: 2500 mm -Max. sheet thickness: 3 mm -Max. intermediate dimension: 470 mm -Connected load: 6 kW Accessories: incl. bending tools/stops, see photos -Dimensions: 4150/1110/H1970 mm -Weight: 5040 kg
Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg
Sheet metal bending machine 3 rollers - 2 driven rollers - Emergency stop facility Sheet width 2040 mm Sheet thickness 6.0 mm Stand width 2100 mm Roller diameter - top 180 mm Roller diameter - bottom 160 mm Total power requirement KW Machine weight approx. 2.4 t Dimensions approx. 3.5 x 0.85 x 1.75 mm Auction-ID: A7-50084-92
Electro-hydraulic mandrel tube bending machine with - Four-fold bending angle preselection - Bending tools 48.3; 42,4; 33,7; 1/2\" - Mandrel length 4500mm Tube diameter 48 mm Bending radius max. 90° Total power requirement 1.5 kW Machine weight approx. 0.5 t Dimensions approx. 1.8 x 0.8 x 4.8 m Auction-ID: A7-50084-60
Folding machine - Manual back gauge max. 830mm - Bending angle preselection via limit switch Sheet width 2000 mm Sheet thickness 3.5 mm Stand width 2050 mm Opening width 355 mm Total power requirement kW Machine weight approx. 2.8 t Space requirement approx. 3.5 x 1.5 x 1.5 m Auction-ID: A7-50084-90
maximum number of results exceeded
please refine your search
250 € 
