135,042 used machines on RESALE, but how to find them? Machine Search
In good working condition. Weighs at least 100kg. Complete with extra sanding belts. Auction-ID: A3-46133-6195
Description: Pontoon construction for floating bands Type: Floating Type: 6-part station Dimensions per pontoon (length/width/height): 1,500 x 1,200 x 1200 mm Overall dimensions station (length/width/height): 5,260 x 4,980 x 1200 mm Weight per pontoon: 552 kg Steel sheet thickness: 6 mm SPECIFIC COMMENT - Remnants from a gravel plant - Without conveyor belts - 8 x full pontoon constructions available
Wide belt sanding machine with two sanding units, conveyor feed table, pneumatic belt tensioning assemblies and overhead extraction connections. Equipped with a front control panel and emergency stop button. Year of manufacture: 2002. Serial number: AL/024026. Electrical supply: 400 V, three-phase, 50 Hz. Rated current: 59 A. Maximum pneumatic pressure: 8 bar. Approximate weight: 2,200 kg. Made in Italy. Auction-ID: A1-50699-40
Table dimensions: L x B 2.800 x 950 mm throat: r & l 550 x 310 mm motor power: 4,0 kw sanding belt measurements: 150 x 7.800 mm : : : 2.600 mm Working width: 1.000 mm Motor output: kW Length of sanding paper: mm Dust suction hood: 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Can be dismantled by the customer up to extraction. Reading hours: 61h, complete with some sanding belts. Auction-ID: A1-50226-3
Belt width 500 mm. Height adjustable. Viewing by appointment. Auction-ID: A1-40324-170
Pouring height: 200 cm Sold with small conveyor. Auction-ID: A1-50867-37
Complete with some various sanding belts Auction-ID: A1-50226-58
Specifications: - Product type: conveyor / belt conveyor - Version: horizontal conveyor belt - Tire type: rubber/plastic treaded tire - Belt surface: coarsely profiled / non-slip - Frame: steel construction - Frame colour: green - Electrically powered - CE components available - Length and bandwidth: to be measured Drive: - Engine brand: Transtecno - Engine type: TS711-4 - Engine serial number: 1705001 - Version: 3-phase asynchronous electric motor - Operating mode: S1 - Protection class: IP55 - Insulation class: F - Motor weight: approx. 5 kg - Cos φ: 0.73 Motor data at 50 Hz: - Power: 0.25 kW - Speed: 1,395 rpm - Voltage: 220–240 V Δ / 380–415 V Y - Current: 1.38–1.27 / 0.80–0.73 A Motor data at 60 Hz: - Power: 0.30 kW - Speed: 1,680 rpm - Voltage: 264–288 V Δ / 456–498 V Y Equipped with, among other things: - Profiled conveyor belt - Electric drive motor - Drive roller ...
Hydraulic spreader / straw distributor with cross belt – quick-change pickup Specifications: Brand: unknown Version: hydraulic spreader / straw distributor Large Stock/Cargo Box Hydraulically driven Internal horizontal dosing roller Dosing roller equipped with cleats Hydraulic cross/conveyor belt Green rubber conveyor belt Robust welded steel construction Suitable as an attachment for shovel, telehandler or front loader with suitable mounting Suitable for agricultural use and bedding of stables Features: Hydraulic hoses and quick couplings Quick-change pickup on the back Particularities: Condition: used, with signs of wear and wear Operation not tested Can be loaded. Auction-ID: A1-47393-351
Function: for surface cleaning/structuring/marking or for cutting/welding Laser 1: Part number. 3248890 Laser 2: Part number: 3248890 Laser power: 100 W Wavelength: 1064 nm Computer Datec: with Windows 11 Pro 64 bit, type: CLX 24-06232 Auction-ID: A7-50858-3
Hours: 01940,02 Power supply: 400 V, 3-phase, 50/60 Hz Largest Heater Load: 14.5 A Short Circuit Interrupting Capacity: 5,000 A CE marking Technical data: The 1707 MKIII has 7 upper and 7 lower heating zones with hot air convection. The heated process section is approximately 1.85 m, the maximum process temperature is 350 °C. As standard, printed circuit boards can be processed approximately 50–460 mm wide; the maximum transport speed is about 1.88 m/min. Please note: Lot 2 and lots 51-56 are sold only with reservations. The seller still has to confirm the bid Lot 2: the complete processing line. There you will also find a video on the individual process steps and machines Lot 51-56 Individual parts of the machining line. These are the same parts as Lot 2. Either Lot 2 OR Lot 51-Lot 56 is sold Auction-ID: A7-50858-55
Fitted: Bearings and rubbers replaced 7 years ago, and feeding trays replaced about five years ago Auction-ID: A1-47393-211
Tipper with discharge belt and cross conveyor for the food processing industry, This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away., The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/foodeq-tvb400-4350/, Type: Tipper with discharge belt and cross conveyor, Belts: Blue food-safe ...
Inclined conveyor for moving product in food processing lines, This Eillert TR-3700-400-425 is an inclined belt conveyor with a stainless steel frame and a blue plastic belt fitted with cleats. It stands on a mobile frame with adjustable feet, allowing the conveyor to be levelled and repositioned on site. The drive runs on 400V three-phase power and is fitted with its own control box with start-stop button. Eillert, based in Ulft in the Netherlands, is known as a manufacturer of processing machinery for the vegetable, fruit and potato sector., Located in Emmeloord, the Netherlands. Immediately available. Asking price: EUR 7,000., More photos and full specifications: stcfoodsolutions.nl/en/machine/eillert-tr-3700-400-425/, Type: Inclined belt conveyor, Belt: Blue plastic belt with cleats, Frame: Stainless steel, mobile, adjustable feet, Power supply: 400 V, three-phase, Controls: Own cont ...
with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-486
with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-485
with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-487
MABO SPECIAL professional long belt sander, equipped with a long sanding table, an abrasive belt and an integrated suction system. Manufacturer: MABO, Rimini (Italy) Power supply: 380 V Equipment: long work table, abrasive belt, suction and emergency stop Visual condition: used workshop machine with visible signs of use. Auction-ID: A1-50714-4211
with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-484
Ribbon departer Maja Skinny, with table for open use, Connection 400V, dimensions LxWxH approx. 80x82x123cm, weight approx.: 200kg, good used condition, fully functional
• Electronic sectioned sanding pad with 56 sectors for wide belt sander • Dimensions of the unit: approx, 1600 x 150 x 260 mm • Sanding pad length approx, 1500 mm • It includes 2 control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-204
Belt dewarper Weber ASB 600/2, with ribbon and open use, 2 speeds, for an extra charge, the belt and the pressure wheels can be renewed, Connection 400V, dimensions LxWxH approx. 85x77x125cm, weight approx. 220kg, very good used condition, fully functional
Transport system, consisting of, - transport belt, rubber belt, belt width: 600 mm, - steel platform, working height: 4800 mm, total dimensions platform: 2600 mm x 2270 mm x 5800 mm - platform with 2 bunkers, dimensions bunkers: (2x) 410 mm x 2250 mm x 600 mm, working height: 3300 mm, dimensions platform: 7100 mm x 6200 mm x 4400 mm.
• Lot of 2 electronic sectioned sanding pads with 56 sectors for wide belt sander • Dimensions of each unit: approx, 1600 x 150 x 260 mm • Sanding pad length approx, 1500 mm • They include the control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-199
Stacker + buffer table Ø 1250 mm. Includes steel stacking bin/stacker and 4 belts transport trolleys. This lot is part of the final combination 53 (Lots 48 to 52) Auction-ID: A1-50060-52
2-head, with 1 Galli drying tunnel, type: TGV 20, 1x Firanko Techniek e.g. belt stacker, connection: 380 volts. Includes 4 belts of transport carts Auction-ID: A1-50060-6
Vietmac PL-84 Wide Belt Sander/Combi Working width 1100mm Working height 3-160mm Number of generators 1 Agregat combi Grinding unit blowing Main motor with a power of 8.8/11kw Feed speed adjustable by variator
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50799-236
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50796-236
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50799-136
consisting of: 1x Galli server (14.16), year of manufacture: 2000, 1x A+A stamping machine (20.05) model: FS 90, maximum working width: 50mm, belt speed infinitely adjustable (1998), 1x Bibo punch crosscut cutting machine (20.07), model: FCA 93N (2013), 1x A+A linkage machine (15.04), 1x belt stacker (14.19) 1x buffer table, Ø 1250mm, 1x stacking box and 4 belt transport trolleys. Auction-ID: A1-50060-47
consisting of: 1x paint / polishing machine (13.04), model: FCE (2001), 1x drying tunnel (14.07), type: TGV 20 (1998), 1x paint polishing machine (13.03), 1x drying tunnel (14.05), type: TGV-20 (1998), 1 conveyor belt (14.09), model R1, (1995), 1 grinding machine, model: RC 50 and double steel material tray. The final combination is part of the lots (54 to 58) Auction-ID: A1-50060-59
consisting of: 1x Galli belt server (14.15), year of manufacture: 1996, 1x Galli stamping machine, model: FS 90 (20.04), maximum working width: 50mm, belt speed infinitely adjustable (1998), 1x Fezer vacuum pump, type: 040-138, 1x Bibo punch crosscut cutting machine (20.08), model: FCA 93 S (2011), 1x linkage machine (15.01), 1x belt stacker (14.17) 1x buffer table, Ø 1250mm and 4x belt transport cart. The final combination is part of lots 48 to 52 Auction-ID: A1-50060-53
buffer table Ø 1250 mm. Includes steel stacking bin/stacker and 4 belts transport trolleys. This lot is part of the final combination 47 (Lots 42 to 46) Auction-ID: A1-50060-46
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50796-136
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50799-36
in various versions; including tire dimensions. approx. 3850x100 mm; 400V Auction-ID: A1-50542-14
mobile. Including 1x Fezer vacuum pump (28.01). This lot is part of the final combination 53 (Lots 48 to 52) Auction-ID: A1-50060-48
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50796-36
in various versions; including tire dimensions. approx. 5000x120 mm; 400V Auction-ID: A1-50542-15
Gilles ASC-A 48-32 6 rows 45 centimeters with TR 24 for defoliation with polisher shaft and conveyor belt. With shells for the bottom of the tractor. Remote control available. Auction-ID: A3-46138-17282
Technical description : 2 UNITS SCRAP CONVEYOR SYSTEMS consisting of: - First unit being approx. 35 meters length - Second unit being approx. 40 meters length - Each having a drive unit, gearbox, reversing station - Conveyor width is approx. 1100mms - Conveyor height is approx. 1200mms. Both units were professionally dismantled, cleaned and stored carefully into containers in our warehouse in D-57258 Freudenberg some 140 km north of Frankfurt International Airport
maximum number of results exceeded
please refine your search
100 € 
