We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
123,814 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Technical details: - Min. blade length: 4,330 mm - Max. blade length: 4,430 mm - Possible saw blade widths: 6 - 25 mm - Max. blade thickness: 0.6 mm - Cutting speed: 1,168 m/min - Roll diameter: 600 mm - Cutting height: 360 mm - Cutting width: 570 mm - Table length: 580 mm - Table width: 580 mm - Diameter of suction nozzle: 100 mm - Mobile on wheels, 1 x wheel brake available - With motor brake, can be unlocked for changing the saw blade Engine data: - Power: 2.2 kW - Voltage: 380 V - Current: 5.5 A - Frequency: 50 Hz - Speed: 2,890 rpm Accessories: - incl. 1 x saw blade 9 x 4,430 mm - incl. 1 x saw blade 15 x 4,430 mm - incl. 1 x saw blade 25 x 4,430 mm (already mounted on machine!) - incl. 1 x saw blade 30 x 4,430 mm (Note: Use is not recommended by the manufacturer.) Dimensions (LxWxH): 1,118 x 750 x 2,113 mm Transport Dimensions = Machine Dimensions ...
used
Technical data Circulary table diameter: 400 mm Overall dimensions machine: Length: 700 mm Width: 600 mm Height: 1800 mm
used
Technical data Execution: Single polishing machine Speeds: from: 1300 / 2600 rpm up to: 4000 rpm Voltage 50 Hz 3x: 380 Volt Power: 1 kW Machine´s weight about: 50 kg Overall dimensions machine: Length: 800 mm Width: 400 mm Height: 1200 mm Various accessories: Cast-iron base
used
Technical data Polishing disc: 4 x Voltage 50 Hz 3x: 380 Volt Power: 5 kW Overall dimensions machine:
used
- According to layout bottle transporters - According to layout carton transporter - With central control
used
CONSTANT SPEED FOOD GRADE CONVEYOR BELT (SUITABLE FOR HAND PRODUCT REMOVAL) Equipment / Additional information: Size (cm): 310x70x90 // 150 KG Belt width: 55
used
width of the strips: 100 mm band length: 920 mm engine output: 0,35 kW saw band speed: 7 m/sec. Table surface: 300 x 150 mm roll diameter: 58 mm dimensions: 460 x 400 x 210 mm voltage: 380 V weight of the machine ca.: 15 kg Equipment: - Table model - 1 grinding belt - Steel grinding table with planed surface - Belt alignment via two Threaded rods with star grip The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Flender drive gearbox from a tunnelling conveyor belt mill Gearbox, output speed approx. 44 rpm (1.5 m/s with drum diameter 630mm) Drive motor 75 kW Turbo clutch
used
Product number: 2351J Type: ATG1200/2500 Serial number: 03422230 Year of construction: 2020 Belt width: 1000 mm Length: 3400 mm Power: 3 x 400V, 50Hz, 0.5kW Dimensions: 3400 x 1600 x 1200 mm Weight: 325 kg With 600 mm manually retractable infeed piece
used
Conveyor belt tensioning drum with shaft Diameter 830mm Drum width 1300 mm for conveyor belt 1200 mm
used
Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of construction: 2016 Max.: 215 mm Cutting height passage max.: 250 mm Table dimensions: W46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 5 pieces of new saw blades Left-hand delivery Protection Engine Brake Function tested, machine ready for immediate use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493
used
I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.
used
Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort
used
Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort
used
Volume: 3500 L Suction: 3500 m?/h Electrical load: 136 kVA Base frame with integral floor tray according to German water Management Act Sound-insulating enclosure for 78dB(A), painted Water-tight treatment chamber of stainless steel Integrated bottom tank Oil skimmer with integrated oil seperator (bath1) Chain conveyor with cross bars and wire hooks Silhouette plates with part sensors Silhouette plates (stainless steel) for zone partition Vertical process pump Make-up water supply connection 1 Compressed-air supply connection 1 water meter and dirt trap 1 Tank level control Heating element with temprature control Drain pump unit 2 Mesh wire basket filter per bath SIEMENS S7-300 control, SIEMENS KP 700 comfort
used
Bone Band Saw KOLBE K260 Specifications: Type: Kolbe K 260 400 V / 50 Hz / 1.1 kW / 3.1 A Year of construction: 2017 Max.: 215 mm Cutting height passage max.: 250 mm Table dimensions: W46 x D70 cm Machine dimensions: H160 x W60 x D70 cm Saw blade size: 2170 x 16 mm Weight: approx. 115 kg Equipment: Device completely stainless steel Stainless steel base on 2 swivel castors with brake & 2 fixed castors Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 5 pieces of new saw blades Left-hand delivery Protection Engine Brake Function tested, machine ready for immediate use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493
used
Bone Band Saw KOLBE K330 Specifications: Type: Kolbe K 330 400 V / 50 Hz / 1.5 kW / 3.4 A Year of construction: 2008 Max.: 260 mm Cutting height passage max.: 310 mm Table dimensions: W59 x D76 cm Machine dimensions: H161 x W72 x D80 cm Band saw size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) including 5 pieces of new saw blades Left-hand delivery Protection Engine Brake Function tested, machine ready for immediate use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493
used
Bone Band Saw KOLBE K330 S Specifications: Type: Kolbe K 330 S 400 V / 50 Hz / 1.5 kW / 3.4 A Year of construction: 2014 Cutting side passage max.: 280 mm Cutting height passage max.: 300 mm Table dimensions: W59 x D76 cm Machine dimensions: H180 x W75 x D80 cm Band saw size: 2490 x 16 mm Weight: approx. 155 kg Equipment: Device completely stainless steel Stainless steel base, height-adjustable Work table can be folded out for easier cleaning (optional equipment!) Material pusher (removable) Side guide (removable) Bone flour container is included (it is missing in the pictures) Left-hand delivery Protection Engine Brake Function tested, machine ready for immediate use Stock machine, immediately available! Condition & accessories see original pictures. If you have any questions, email or call. 03423-706493
used
500 m belt conveyor Dematic, driven Used goods built in 2019, very good condition, see pictures Conveying width: from 49 to 60 cm Lifting heights: from 80 and 150 cm Partly with sensor technology Module lengths from 100 cm to 350 cm available. Various designs and curved conveyors available. Negotiation price: from € 180,- / rm net ex location depending on the purchase quantity and design Dismantling will take place from April to June 2024. Location: Northern Italy. Viewing possible by appointment. Further information on request. Partial sale possible. Systems are professionally dismantled and loaded. Transport and customs clearance can be carried out by us. Assembly and programming can be carried out by partner companies. EVERYTHING HAS to go! - from location to max. End of June 2024 The following products of the plant are also available for sale: 30 ...
used
Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C
used
ID3275 Shore Belt Plant/Conveyor System year approx. 1995-2000? Approx. 470 m conveyor belt system, with covers, off-road, ascending with roadway crossing, fully hot-dip galvanized, year of construction unknown - probably 1995-2000. Estimated active working time approx. 10 years. Length approx.: 470 m, intended belt width 500 mm, discharge and drive-through height approx. 5.7 m, without conveyor belt, dismantled in transportable units, discharge station with railing and walkway, drive power 18.5kW approx. 470 m land conveyor system, with covers, following the terrain, ascending with road crossing, fully hot-dip galvanized, year of construction unknown - probably 1995-2000. Estimated active service life approx. 10 years. Length approx.: 470 m, intended belt width 500 mm, discharge and drive-through height approx. 5.7 m, without conveyor belt, dismantled in transportable units, dischar ...
used
Technical data/equipment: - Working width 1350 mm, grinding from above, with 2 grinding units: Contact roller unit 15 kW with calibration device and height-adjustable contact roller 65° Shore Combined contact roller pressure shoe unit, drive power 11 kW, with higher adjustable contact roller 85° Shore and through the workpiece electr.pneum. controlled air cushion pressure shoe - Sanding belt dimensions W x L 1360 x 1,900 mm - Cleaning brush in the spout - Belt feed device, speed 3-15 m/min - Roller table in the inlet - Display of workpiece thickness - Air requirement machine control 60 NL/min - Suction nozzle Ø 3 x 200 mm - Extraction capacity 7,600 - 8,200 m³/h, Machine resistance 800 Pa - Total connection value 28 kW (380 V, 50 Hz) - autom. Star-triangle start-up - Braking device - pneum. Strip tension - optical airless belt control - pneum. spring-loaded centre ...
used
Kronen GS10 Vegetable Belt Cutter For cutting of cabbage, lettuce, leafy vegetable, etc.
used
For slicing of cabage, lettuce, leafy vegetable, etc.
new
VSA 38 L Feeder Feeder VSA 38 L 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz 2-stage gearbox Weight 85kg G&STÜ-5114500
new
Working width: 1100 mm; Working height: 140 mm; Min. workpiece length: Height adjustment: electric; Workpiece thickness display: digital; Aggregates: 2; 1. Aggregate: Contact Rolling Unit Steel; 2.Aggregate: Combination Aggregate (Roller/Shoe) Rubber Roller; Textured brush: Yes, brass; Sanding belt dimension: 1120 x 2150; Motor power: 11kW; Current consumption: A; Extraction connection: 3 x 160 mm; Machine length: 1500mm; Machine width: 1700mm; Weight: 1500; WORKING WIDTH mm 1100 ABRASIVE BELT DIMENSION WIDTH x LENGTH mm 1120 x 2150 MAX MACHINING HEIGHT MM 160 CALIBRATING STEEL ROLLER à ̃ 150 Steel GRINDING ROLLER WITH RUBBER COATING à ̃ 150 Rubber ABRASIVE BELTS MOTOR POWER HP 15 SANDING BELT SPEED m/sec. 18 - 16Insert-controlled sanding pad VARIABLE FEED SPEED MOTOR POWER HP 0.75 FEED SPEED M/MIN. 4 / 20 LIFTING OF THE WORK TABLE MOTOR POWER HP 0.33 SELF-CENTER ...
used
Horizontal belt sander Italian makeBandwidth: 130 mmPad size: 500 x 130 mmDrive power: 0.9 hpPower connection: 380 V, 50 HzDimensions L x W x H: 800 x 400 x 1000 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Flat belt grinding machine make MAFAC type NT 300 SFabr. -No: 417643 Year 1986Tape dimensions: 2000 x 300 mmBelt speeds: 6, 8, 10, 12, 16, 20 m / srequired air pressure: 5 - 6 barDrive power: 9.3 kWDimensions L x W x H: 1440 x 1200 x 2047 mmWeight approx: 500 kgWith- Table motorized vertical and horizontal- wet grinding device- pneum. belt tension- Deburring and chamfering deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Contact grinding machine / contact belt grinding machine make SOLDER type KS 350Make -No: 1520Sanding belt length: 3500 mmGrinding belt width: 5 - 75 mmDrive disc Diam: 180 mmBelt speed: 13.5 + 27 m / minDiameter of the pipes: 3 - 180 mmFeed rate: 0 - 25 m / minDrive power: 3.2 / 4 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Belt sander, make UNKNOWNTechnical specifications:Band width: 40 mmSupport table: 400 x 265 mmExternal dimensions: 550 x 700 x 1500 mmWeight approx: 80 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Max. working width / belt width 210 mm; minus. thickness 0.2 mm; Max. thickness 3 mm; Max. roll Ø 80 mm; v.v. supply roller conveyor; Length approx. 700 mm
used
Wet three-roller belt grinding machine make LÖSER type KS 355Machine -No: 503Technical specifications:Abrasive belt length: 3500 mmMax. contact roller width: 120 mmContact washers: 200 x 80 mmNumber of contact rollers:3Power connection: 380 V / 50 HzDrive power: 2.2 kWWith- Wet grinding device- Sanding belt with one sanding position- pneumatic belt tensionusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Belt grinding machine make GRITTechnical specifications:Tape Width: 150mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Equipped with 2 forming rollers 30 and 40mm.
used
Max. working width approx. 195 mm; v.v. (7x) straightening rollers; (4x) transport rollers; rollers diameter 80 mm; Supply table dim. approx. 900x400 mm; v.v. control box and control cabinet; electric/pneumatic; incl. loop control device
used
Excluding Boxes
used
SPECIFICATIONS: Flywheel blade mm: 600 Engine power KW: 3
used
including forming rollers
used
Wide belt Sander Brand: Bütfering Model: AWS 3 Year of construction: 1989 Working width: 1350 mm 1 x Calibration roller 1 x Combi unit ( roller + grinding shoe ) 1 x Sanding shoe 1 x Cleaning brush Location of the machine: Customer location / Abroad
used
ORDER NO. 6556 TECHNICAL DATA - max width of the workpiece 1100mm - max height of the workpiece 160mm 2 aggregates: 1) corrugated rubber roller for calibration 2) pneumatic shoe +2 metal rollers in advance: - 2 rollers, metal, slip - pressure - aggregate - 2 slip metal rollers - aggregate - 2 rollers, metal, slip - cleaning brush bottom: - 2 rubber rollers, slip rollers - pulling tape - oscillation of pneumatic tapes on photocells - lifting the electric table - 2 types of feed speed - working pressure 8-10bar - diameter of the extraction connection 2x200mm - total power 30kW - overall dimensions L/W/H 2230x2020x2050mm - weight about 3000kg Net price: 25900 PLN Net price: 5756 EUR depending on the price 4,50 EUR (Prices are subject to change with higher fluctuations)
used
including forming rollers
used
SPECIFICATIONS: Diameter of flywheel mm: 1000 Width mm: 60 Installed capacity KW: 8.5 Complete with mechanical device type "re-cutting saw"
used
SPECIFICATIONS: Diameter of flywheel mm: 800 Installed capacity KW: 3.3 Made entirely of cast iron Complete with saw blade clamping device
new
width of the strips: 50 mm band length: 940 mm band speed: 3 - 22 m/min turning speeds: 1450 U/min tube diameter: 16 - 114 mm radius: 180 ° total power requirement: 4,75 kW weight of the machine ca.: 265 kg. range L-W-H: 1.000x750x1.300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180 (angle). - Manual work possible without feed - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Type: Conveyor with modular belt Condition: after renovation Length: 5000 mm Available quantity: 2 pieces Width: 440 mm Belt width: 410 mm Band thickness: 16 mm Pitch: 52 mm Shaft for gear motor: 30mm Prepared for legs: 60mm Price: 2900 EUR per piece
used
Belt width 560 mm.
used
used
Belt sander Casolin Avant RRT 1100 Machine No. 9632007 Maximum sanding width 1100mm Min/max sanding height 3-150mm Sanding belt size 2150x1140mm Throughput 6-12m/min Required extraction capacity 3500m³/h Motor 11kW 15kW, 27Amp, 380V Transport dimensions: 2000x1900x2100mm (LxWxH), Weight +/- 1350kg With 1st sanding belt, oscillating does not work.
used
Belt sander Boere Merite 1000 KC Maximum sanding width 1000mm Maximum sanding height 150mm Sanding belt dimensions 10101900mm Variable flow rate min-max 3-16.5 m/min Output roller conveyor 300mm 1st Sanding unit Kontactrol 2nd Abrasive unit Kombi Motor 18.5kW 380V Transport dimensions: 1800x1600x2100mm (LxWxH), Weight 1500kg
used
Engine 15Hp Throughput min/max 4-20 m/min Roller conveyor entry 300mm Roller conveyor output 300mm