136,406 used machines on RESALE, but how to find them? Machine Search
Conveyor belt, belt conveyor, conveyor belt, belt conveyor, conveyor belt -Body: made of stainless steel -1x conveyor belt speed: 16 m/min -1x conveyor belt speed: 8 m/min -Drive: 0.55 kW -Transport belt: with carrier -Belt width: 695 mm -Length: 4500 mm -Number: 2x conveyor belts available -Price: per piece -Transport dimensions: 4550/1000/H1630 mm -Weight: 450 kg
workpiece height: max. 940 mm total power requirement: 6 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 910 mm Number of sanding units: 1 st. Workpiece thickness max.: 3 - 160 mm sanding belt measurements: 2.200 x 1.010 mm Feed motor: 0,55/0,75 kW Feed speed: 4,5 / 9 m/min. Weight: 1.210 kg : 18,5 m/sec output: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SCM Sandya Uno Wide Belt Sander Working width 900mm Working height 3-160mm Number of generators 2 Aggregate in rubber shaft Combi unit with boot 11kw main motor Pneumatic Oscillation Sandpaper Dimensions 930×1525 Two feed speeds of 4.5-9m/min Machine Dimensions:1560 x 1280 x 1920mm Weight about 1100kg Net price
Usable width: 500mm, infeed: 1100mm straight, 45° center section: 2500mm, outfeed: 900mm straight, conveying element: smooth plastic belt, cleat spacing: 200mm, cleat height: 50mm, drive drum diameter: 108mm, return roller diameter: 108mm, conveying speed: 0.2m/s, drive: 1 unit, without brake, drive arrangement: left side, construction height H1: 400mm, construction height H2: 2000mm, supports: mobile frame with swivel casters, guards: fully covered from below, from above only the inclined section, side guides: on both sides, length: 4500mm, width: 500mm, height: 1985mm, the belt conveyor is unused and new, with documentation. On-site inspection is possible.
Number of sanding units: 2 st. sanding width: 180 mm Sanding height max.: 150 mm MAWEG Robert Hildebrand Saturn Duo Professional two-belt finish sanding machine with brushing unit Double-sided, sands from top and bottom Pneumatic belt oscillation Pneumatic belt tensioning Feed via top and bottom conveyor belts with spring-loaded hold-down rollers, infinitely variable speed (5–15 m/min) Workpiece thickness adjustment with pre-selectable stock removal amount at machine infeed, based on sensing the raw timber thickness Adjustment to wood thickness via motorized positioning of the machines upper section Digital thickness setting via mechanical counter with 0.1 mm display and zero-point adjustment Safety switch for oversized wood thickness at machine infeed Double-sided brushing unit with integrated workpiece blow-off Sanding belt blow-off (top and bottom) Belt breakage monitoring switch wi ...
Conveyor belt conveyor belt conveyor 4500 mm length 100 mm width Condition: very good (used) Description: 4.5 meter length of the conveyor belt 100 mm belt width Overall dimensions: 4500 x 270 mm x 1550 mm incl. motor Perfectly functional
Number of sanding units: 4 St sanding width: 190 mm Sanding height max.: 4-180 mm weight: 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians -------------------------------------- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geom ...
Serial number: 1851 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 16 A Connection: 5 kW Belt width: approx. 100 mm incl. roller devices right: 2900 mm Length left: 2900 mm Length incl. extraction system from the manufacturer HASCON, type: PULSATRON COMPACT, year of construction: 2014 Auction-ID: A7-49089-385
Wide belt sander SCM Sandya 7S Working width 1100 mm Sanding height 4-160 mm 1 metal generator 11kw 2 combi unit 11kw Combi speed adjustable by inverter Electric height adjustment Optical Oscillation Feed speed adjustable by variator 3-17m/min VACUM pump Technical documentation and CE certificate Year of manufacture 2004
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Bridge spacing 30 mm, bridge height 5 mm Conveyor belt made of plastic white, as good as new Tilt adjustable 1 Speed Dust compartment Mobile Drive 400V/50Hz
Manufacturer: HOUFEK Model: SPB 800 MAXX 2 Year: 2024 Condition: Used Stock number: 9516 Max. workpiece height: 0.5 - 160 mm Vacuum belt width: 800 mm Weight: 2100 kg
SCM Sandya Win Wide Belt Sander Working width 630 mm Grinding height 3 – 140 mm 1 combi unit Electric height adjustment Pneumatic Oscillation Two types of feed speed 5.5kw main power
Number of sanding units: 6 st. sanding width: 45-165 mm Sanding height max.: 45-92 mm weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer -------------------------------------------- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturers description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, c ...
Wide belt sander SCM Sandya 3 RCS 95 Working width 950 mm Number of generators 2: 1 steel shaft generator 2 station wagon unit – rubber shaft + boot Boot automatically fired Oscillation on photo cameras 2 transport belt speeds Motor power 11KW Paper Size 1900×970 mm
AC 700 Manufacturer: AC Type: 700 Motor: 4 kW Table dimensions: 740640mm Wheel: 700mm Saw height: 405 mm Max saw widt: 680mm Saw band length: 5.020 / 5.140 mm Band width: max. 40mm Tilting/blade: 45° Working height: 960 Dust extraction: ø120 mm Machine dimensions: 1.3506702170 Noise: 82,3 dB(A)
cutting diameter: 300 mm capacity 90 degrees: flat: 330 x 250 mm capacity 90 degrees: square: 250 x 250 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 260 x 200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 170 mm band speed: 15 - 100 m/min dimensions of saw-band: 3650 x 27 x 0.9 mm Control: MEP CNC total power requirement: 2.2 kW weight: 1190 kg Fully automatic electro-hydraulic band saw, featuring additional operating modes: semi-automatic semi-automatic dynamic manual Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) MEP Direct control technology User interface with intuitive 10 touchscreen display Mechanical buttons for saw operating functions Guarantees reliable, simple, and intuitive operation Real-time monitoring of all cutting parameters Pivoting arm allows for convenient and safe operation Di ...
Centauro CL900 Manufacturer: Centauro M-Nr.: 2064 Year: 1996 Motor: 5.5 KW with electro-pneumatic brake Table dimensions: 1.100800 mm Wheel: 900mm Saw height: 550 mm Max saw widt: 850mm Saw band length: 6.190 – 6.380 mm Saw band width: 30 – 50mm Tilting/blade: 45° Working height: 960 mm Dust extraction: ø120 mm Weight: 925 KG Noise: 82,3 dB(A)
Weinig 806-255 Conveyor belt Manufacturer: Weinig Year: 1998 Total beltlength: 7.000 mm Width belt: 3000 mm
Agazzanio N’RA700 Bandsaw Manufacturer: Agazzani Motor: 2,2kW Table size: 740640mm Wheel: 700mm saw height: 405 mm Max saw widt: 680mm Saw band length: 5020/51400mm Band width: max. 40mm Tilting/blade: 45° Working height: 960 Dust extraction: ø120 mm Machine dimensions: 13506702170 Average sound level: 82,3 dB(A)
Transport Band z.B. für Klebebinder / Transport Belt for example for Perfect Binder Kolbus FS.L 683 Transport Band / Transport Belt Kolbus FS.L 683 Baujahr / Year 1988 - SN. 737 mit Eigensteuerung / with SelfControl Geschwindigkeit regulierbar / Speed adjustable Höhenverstellbar / Height adjustable Bandlänge / Band length 150cm, Bandbreite / Band width 38cm Bandhöhe / Band high 90cm
It is a complete system for dyeing and polishing the side edges of the belt, with 3 heating ovens, extraction system and automatic ejection at the end.
Technical characteristics Useful lg: 1,350 mm – H. max: 160 mm Dimensions of sanding belt: 1,380 x 2,620 mm Number of suction outlets: 3 x Ø180 mm Roller I: Ø190 mm, rubber coating 85 SH Roller II: Ø190 mm, 65 SH rubber Roller/Pad III: Ø230 mm, 35 SH rubber P. 1 Band Engine: 15 HP P. 2 & 3 strip engine: 15 HP each Advance belt: with dimmer Machine dimensions: 2,000 x 2,400 x 2,350 mm Weight: 3,000 kg Electricity consumption: 54 A Auction-ID: A1-50215-30
KÜNDIG PRIMO 1100-E wide-belt sander • Year : 2004 • Working width: 1100 mm • Main motor power: 10.5 kW • Power supply : 380 V / 50 Hz • Amperage : 22 A • Adjustable feed speed: 3–15 m/min • Electrically adjustable working height • Electronic \"Smart Select\" control with digital display • Motorised feed belt• Suction: 2 vents Ø 150 mm • Weight : approx. 1200 kg Auction-ID: A1-50215-4
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50066-236
Description: Set consisting of a feed bunker for a wood pellet production line with a set of 2 associated industrial belt conveyors. Bunker : Capacity: 6 m³ Power supply: 3×230/400 V, 50 Hz, TNS Installed power: 1.5 + 1.5 + 0.37 kW Conveyors: Power: 0.75 kW each Year: 2022 Manufacturer: Ortbauer Metall & Maschinenbau GmbH Model: Förderband Z1144/11 and Förderband Z1144/10 Serial No.: Z1144/11 / Z1144/10 Features: Set of 2 industrial belt conveyors, 3×230/400 V 50 Hz TNS power supply, Topoz motor, S/N motors 4211 0066 and 4211 0065. Dimensions (mm): approx. 5000 × 900 × 2600 each Weight (kg): 150 each Note: Both conveyors are combined with the feed bunker and are sold as a single set. Auction-ID: A1-50223-102
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50066-136
Pneumatic belt sander for 10x330 mm belts. Powered by a flow of compressed air, it is perfect for sanding in hard-to-reach places. Equipped with a telescopic belt tensioner and quick tool-free belt change. Auction-ID: A7-50066-36
Type: Belt conveyor / feed hopper Brand: Dewaele-Briche Condition: Used, complete industrial assembly Equipment: control cabinet, frequency inverters, motors, sensors, hopper, inclined conveyor, technical documentation. Year: 2022 (according to visible plates on subassemblies) Note: Sold as is, according to photos. Auction-ID: A1-50223-107
Cutting height: 120 mm Motor output: 11 kW cutting width: 420 mm Cutting length: 5200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
We offer you a chain conveyor belt for Presona channel balers Technical specification Strip width: 1.1 m Height of the side in the ascending part: 0.85 m Length of the horizontal loading section: 6.0 m Gooseneck: 1.0 m Belt depth in the horizontal loading area: 0.5 m Length of the rising part: 9.0 m Lifting height: 1.0 m Motor power: 3.0 kW If you have any questions, please call us: +48 696 072 985
Aluminium telescopic conveyor belt, Gawronski – used - : Price ex location: only 14.950.-€ (net), incl. loading! Manufacturer: Gawronski GmbH Type: 686001 Year of Make: 2019 Series: Universal Belt Packages with Counter Mains voltage: 380/50 V/Hz Power 1.8kW, max. 2.2kW Working platform height, infinitely adjustable in height from 140mm to 965mm Max. load working platform: max. 1 person 150kg Length of transport position: 8,700mm Weight: 1.160kg General cargo max. 50kg/ldm Condition: good Available: immediately Location: 57223 Kreuztal
Conveyor Belt Straight Type GL MTF Technology Length 3.30 m Width 0.57 m with usual signs of use Price is exclusive of VAT
TECHNICAL DATA: Dimensions: 3200 x 700 mm Rotation: 90°
Telescopic belt conveyor, Caljan, 12m total length, laterally movable on rail (the rails are screwed on the ground) – used - : Price from location: only 25.000.-€ (net), incl. loading! Manufacturer: Caljan Year of Make: 2022 Project No.: 30-7322-00 Type: CB3M 5/7-600 Length retracted: 5.10m Length extended: cq. 12m Strap width 60cm Serial No.: 215652 Rated Voltage: 3 × 400VAC+N+PE Nominal frequency: 50 Hz Rated current: 6.44 A Nominal power: 2.47 kW Weight: approx. 2,000 kg Former new price over 70.000.-€ (net) Condition: good to very Available: immediately Location: 86161 Augsburg
Böma Conveyor Belt FB-50-KU-410-2250 incl. SEW-Eurodrive Geared Motor WAF20 DR63L4 Auction-ID: A7-50356-23
Scope of delivery can be seen in the pictures Sample images, deviations in optics and serial number possible Auction-ID: A7-50356-2
Sanding width 1350 mm. Workpiece thickness: 3 - 200 mm Equipped with 3 aggregates, 1st steelroller, motor 18,5kW 2nd roller 65? Shore, motor 15kW shared with 3th aggregate 3th Kombi unit, combination roller with 45? Shore and pneumatic controlled sanding shoe Electrical height adjustment of the transport table. Pneumatic sanding belt tension. Sanding belt oscillation. Pneumatic sanding belt cleaning Throughput speed with variator Workpiece thickness measurementm with manual setting at the machine feed Sanding belt dimensions: 1370 x 2150 mm 4 rollers on in- and outfeed table
Useful sanding width: 1100 mm. Sanding belt dimensions: 1110 x 1900 mm. Number of sanding aggregates: 3 Roller steel grooved 15 kW, Roller 70? shore 18.5 kW, Roller 50? shore Aggregate 2 & 3 with shared motor Max. sanding thickness: 150 mm. Throughput speeds: 2,5 - 11 m/min Motor through-belt: 0,55 kW Height adjustment motorized, motor 0,26 kW Automatic thickness adjustment Input rollers length 700mm Output rollers 1600mm Touchscreen
Sanding width 1350 mm. Workpiece thickness: 4 - 170 mm Equipped with 3 aggregates, 1st steelroller, motor 22kW 2nd roller 65? Shore, motor 15kW 3th Kombi unit, motor 12kW, combination roller with 45? Shore and pneumatic controlled sanding shoe cleaning brush at outfeed Electrical height adjustment of the transport table. Pneumatic sanding belt tension. Sanding belt oscillation. Pneumatic sanding belt cleaning Throughput speed with variator Workpiece thickness measurementm with manual setting at the machine feed Sanding belt dimensions: 1370 x 2620 mm 5 rollers on in- and outfeed table
Unit 1: Combination sanding unit Effective sanding width: 650 mm. Sanding belt dimensions: 1900 x 650 mm. Sanding belt motor: 7.5 kW Sanding belt runs over a contact roller and sanding shoe Unit 2: Brush unit / structuring Sanding brush motor: 5.5 kW Brush diameter 240 mm, shaft bore 50 mm Minimum workpiece length: 290 mm. Workpiece thickness: 0.5 ? 200 mm. Workpiece feed via conveyor belt, feed speed 8 and 16 m/min Motorised height adjustment with digital electronic thickness gauge Thickness sensor Air Pressure safety device
Wide belt sander with 2 units Max. working width: 910 mm. Panel transport by belt, 2 feed speeds, 4,5 / 9 m/min Equipment: Roller with motor 11 kW, 90? Shore lifting facility of first roller on control panel Combi unit with single belt over roller and pad, roller 45? Shore mecanical lifting of second roller oscillation with infrared detection electro magnetic break main motors
Fine sanding machine Working width: 1300 mm. Workpiece thickness: 3-140 mm N? of units: 2 Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 18,5 kW motor,0,5-12 m/s belt speed with freq. Controlls, belt cleaning Wide belt, CSD sanding pad, belt sizes 2620 x 1350 mm, 15 kW motor, 0,5-12 m/s belt speed with freq. Controlls, belt cleaning Brush cleaning unit scotch bride 250 mm diameter, 4 kW Brush cleaning unit 150 mm diameter, 1,5 kW Feedbelt speed 5 - 25 m/min, 1,5 kW motor, frequency control Working height 930 mm +/- 20 mm Carpet cleaning brush EA dedusting machine high-pressure blow-off system with rotating nozzles and ionization for statically charged dust
Optima/WIPOTEC-OCS EC automatic continuous scale 1400-700-585 RA2392 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 1999 Machine type: automatic checkweigher Total size: approx. 1400 x 700 x 840 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative humidity 20 - 80 Volume: the A-weighted equivalent continuous sou ...
Key data: 1900 mm, 4 , 380 mm
Description 1 indestructible 4 roller wide belt sanding machine from Böttcher & Gessner - grinding width ca. max.1900 mm, machine can drive up to approx. 390 mm, constant table machine. Two grinding rollers at the top and two at the bottom, one of which oscillates at the top and one at the bottom, retaining belts are clamped directly on the individual rollers. Weight approx. 10 t... With roller conveyor to the left and right of the machine 1. Performance data grinding machine Upper grinding motor No. 1 30 kW / 80 A Upper Grinding Motor No. 2 30 kW / 80 A Lower grinding motor No. 1 30 kW / 80 A Lower Grinding Motor No. 2 30 kW / 80 A Feed motor 7.5 kW / 25 A Motor table adjustment 7.5 kW / 25 A Fuse main switch with 400 A. Overhead crane for dismantling is available. Sale as seen without warranty from location and without dismantling.. But help is being provided. ...
Code: 0484 Brand: VOLPATO Model: LBO-60/G - CE Standard Cast-iron belt sanding machine with 3 motors for wood, composites, metals, aluminium and various materials - CE Standard Technical data: Cast iron base Table length mm 3000 Table width mm 1000 Vertical stroke mm 680 Belt size mm 8400 x 150 Motor Kw 4,12 - Speed 18 mt/sec Reverse belt rotation Vacuum motor Kw 0,56 Diameter pulleys mm 240 Suction diameter mm 120 Overall dimensions mm 4500 x 1500 x 1500 h Weight kg 600
maximum number of results exceeded
please refine your search
1.800 € 
