belt oven used for sale

ELEKTRISCHER KASTENOFEN Verwendungszweck : Pulverhärtung Maximale Temperatur : 220ºC Das Heizsystem des Ofens ist als Zwangskonvektionssystem ausgelegt. Es basiert auf dem Prinzip, dass die Luft des Ofenvolumens mit Hilfe eines Umwälzgebläses in den Ofen gepumpt wird und die Ofentemperatur durch die Wärmeübertragung der Luft, die durch die Heizeinheit strömt, erhöht wird. Die Wände des Ofens und der Heizeinheit bestehen aus modularen Blechen und hochdichten Isolierplatten. Luftverteilungskanäle mit regulierbaren Klappen im Inneren des Ofens sorgen dafür, dass die Ofentemperatur an jedem Punkt gleichmäßig ist. Die Temperaturregelung ist digital und ermöglicht eine präzise Einstellung der Ofentemperatur. Die Heizeinheit wird seitlich, hinten oder oben am Ofen angebracht und besteht aus einer isolierten Heizkammer, einer Heizzelle mit Widerstand im Inneren, eine ...

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Availability: immediately Condition: in working order, new mesh belt Dismantling: by buyer Overall length: approx. 26,500 mm Length of baking chamber: approx. 24,000 mm Overall width: approx. 2,650 mm Net belt width: approx. 1,700 mm Usable width/working width: approx. 1,500 mm Inlet length: 1,000 mm Spout length: 1,300 mm Sheet metal: painted white

KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 33 kW = 28,380 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is operated with gas burner 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 3,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 58 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...

Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...

Powder furnace el. or gas Powder curing furnace 6,500 x 1,900 x 2,000 mm 1 Inner dimension length 6,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 7,500 = 15,000 m³/h 10 electric motors 2 pcs 2x 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 110 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device fo ...

Hedinair Oven 2 door opening 4 shelves 8 Vacuum ports Specification Power : 3phase 415V Kilowatts : 47.6 Amps: 66.5 Internal Dimensions: 1830D x 1900W x 1830 H External Dimensions: 2090D x 2150W x 2190H Air Circulation: 2 off 1.5kW Axial Fan motors direct connection to fan blades internal. Bleed Air & exhaust 1 off bifurcated Fan. Safety: 2 Explosion to rear of oven. Heat Control 1 Eurotherm 3508 segment Programable controller with comms. Overtemperature: 1 Eurotherm Policemen unit

Houno Combi oven Stainless oven, touch screen controls, programmable recipes with timer and temperature controls, seven tray, tray dims 530mm x 320mm, with Brita purity steam unit, mounted on stainless rack, 3Ph

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Carbolite Gero AX30 Heating Oven Original price 3185 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. The tabletop units are equipped with R38 PID controllers as standard. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 1000 Holding power ...

Carbolite Gero AX30 Heating Oven Original price 3385 € Heating cabinets of the Apex AX series are economy laboratory devices for temperatures up to 250°C. Digital PID Controller R38 Recirculating air fan for short heat-up times and excellent temperature homogeneity Stainless steel inner chamber Two height-adjustable, chrome-plated lattice shelves Door with locking function and airtight silicone gasket Complies with safety standard BS EN 61010-2-010:2003 Maximum temperature 250°C Minimum temperature RT + 30°C Volume (litres) 28 Temperature homogeneity (°C) ±5.0 250°C Heat-up time (min) 23 Recovery Time (min) 3 Dimensions: Inside H x W x D (mm) 295 x 300 x 320 External dimensions H x W x D (mm) 440 x 590 x 465 Load per grid/total 10/20(kg) Air change per h 65 Max. power (W) 918 Holding power (W) 342 Weight (kg) 24 Condition: new, without original packaging  ...

Tempering Furnace ARTUR NOLZEN Type TL30/30/50Convection Oven, Convection Oven, Heating OvenFabr. No. 14785 Year of construction 1996Temperature range max. 750C Internal dimensions 300 x 300 x 480 mmInner width at the center bar 260 mmConnected load 6 kWnet connection 400 Volt, 50 Hz- Temperature control NOLZEN Type TRO t - 96 1a.re4- Time control THEBEN, Type TR 635 top- Heating time to 750 C in approx. 95 min. Required space L x W x H 1300 x 1100 x 1400 mmWeight 310 kgGood condition; used

Heraeus Kendro UT 6120 Drying Oven For sale is a used laboratory heating furnace from Kendro Laboratory Products – model UT 6120, manufactured in Germany (Hanau). This instrument is ideal for laboratory applications, drying, heating and material testing up to 300°C. Technical details: Model No.: UT 6120 Order number: 51008822 Factory number: 99108504 Max. temperature: 300 °C Supply voltage: 230 V Frequency: 50 Hz Power consumption: 2.4 kW Current consumption: 10.2 A Protection class: Class 2 Degree of protection: IP 20 Temperature protection: DIN 12880/1 Connection type: 1N/PE Origin: Made in Germany (Hanau) Condition: Used, externally with slight signs of wear (see pictures). More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

Technical Data – Heraeus UT 20 1. Basic data • Model: UT 20 (convection drying oven, Function Line) • Usable volume: 210 litres • External dimensions (W × D × H): approx. 754 × 910 × 720 mm • Internal dimensions (W × D × H): approx. 610 × 672 × 514 mm 2. Temperature range • Working temperature: ambient temperature +20 °C to max. 250 °C 3. Temperature constancy according to DIN 12880 • Deviation at 150 °C (spatial): ± 3 K • Deviation at 150 °C (temporary): ± 0.3 K 4. Electrical data • Power supply: 230 V, 50/60 Hz • Rated power: 2320 W (2.32 kW) • Weight: approx. 100 kg 5. Equipment and construction • Standard: 2 shelves, expandable up to 16 • Stainless steel interior, easy to clean (removable straps, rounded corners) • Circulating air system for even temperature distribution • Microprocessor temperature control (optional: P v ...

Memmert B60 Incubator For sale is a used B60 incubator from the manufacturer Memmert. Technical details: Manufacturer: Memmert Model No.: B60 Design: Incubator / Incubator / Heating Oven Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Application: Laboratory, Research, Industry, Medicine Condition: Used, functional Buy Memmert B60 incubators and other items at low prices – Here you can buy goods from professionals for professionals – In our SHOP you will find more attractive offers.

Combustion chamber output: 175 kW; Working power: 140 kW; Smoke flue diameter: 200 mm; Hot air delivery pipes: 1 x 500mm; Furnace length: 950 mm; Furnace width: 600 mm; Furnace height: 860 mm; Air flow rate: 8900 m³/h; Power consumption: 3500 W; designed for room volume: 3000 m³; Area to be heated: 500/600 m²; Furnace height without hot air delivery pipes: 2200 mm; Furnace width: 930 mm; Furnace length without flue gas fan: 1700 mm; Weight: 615 kg; Hot air furnace with a combustion chamber made of stainless chrome thermal steel, with reinforcing fins and flue exchanger. On

Machine: Heating press Heating area: 3700 x 1400 mm Max. temperature: 180 °C Power: 37 kW Control: Digital with Auto Timer + Audible/Light Alert Tabletop: anodized aluminum, double-sided heated System: Vertical pneumatic opening/closing Working height: 1000 mm Total dimensions: 4610 x 1580 x 1790 mm Weight: 1635 kg Mobility: Ø125 mm swivel wheels with brake Power supply: 220/400 V, 3~, 50/60 Hz Auction-ID: A1-46801-31

Lippert belt conveyor inclined belt GF 7000-650-500 RA1480 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 7000 mm (upper straight 1000mm + arch 500mm + inclined belt 5500mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 ...

Lippert belt conveyor ascending conveyor GF 6330-650-500 RA1476 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6330 mm (ascending conveyor 2930mm + arch 400mm + upper straight 2000mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (U ...

Lippert belt conveyor ascending conveyor GF 6960-650-500 RA1459 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6960 mm (ascending conveyor) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Be ...

Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulle ...

Lippert belt conveyor inclined belt GF 3100-650-500 RA1494 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3100 mm (upper straight 470mm + inclined belt 2630mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive dru ...

Lippert Belt Conveyor Riser with arch and straight GF 6150-650-500 RA1440 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveyor length (NL): 6150 mm (ascending conveyor 2310mm + upper straight 3840mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR):  ...

Lippert belt conveyor ascending belt GF 4360-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4360 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Dri ...

Lippert Belt Conveyor Riser with arch and straight GF 6640-650-500 RA1420 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 6640 mm (ascending conveyor 5390mm + arch 500mm + upper straight 750mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection  ...

Conveyor belt, belt conveyor, belt conveyor MOVING (Sweden) Type BGL22-02-4000-800Order No: 4019584 year of construction 2004Effective length: 3900 mmBelt width: 800 mmBelt length: approx. 8100 mmOverall height frame profile: 120 mmDeflection pulley diameter: 105 mmBelt speed: approx. 10 m/min. Conveyor belt height: approx. 900 to 1300 mmMotor power: 0.25 kWNerg connection: 400 volts, 50 Hz.- Drive via ABB/ geared motor- Movable on 6 fixed castors with brake- Inclined position of the conveyor belt due to different heights of the 3 mobile footrests -

Belt conveyor/ webbing/ conveyor belt approx. 180 linear metres Manufacturer: Trapo AG Condition: Used Year of construction: 2011/ 2012 Drive Type: Belt Total length: approx. 180 meters Total width without motor: approx. 575 mm Total width incl. motor: approx. 700 mm Belt width: approx. 500 mm Strap Type: Smooth/Longitudinal Grooves Frame height: approx. 130/ 90 mm Material: Steel Color: Blue Including SEW motors (0.75 and 1.1 KW): 12 drive units Price per meter Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2025112003 Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor technology ran until dismantling. Goods are delivered in disassembled condition, belt must be glued on site. Thanks to the excellent workmanship of the conveyor techno ...

Properties Used belt conveyor of manufacturer Overbeck Color: Blue Feet must be ordered separately Incl. SEW motor Material: Steel Ideal for fast material handling Expertly disassembled and packed Condition: fully operational 2 STK. in stock Belt conveyors The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances. Technical data: Mass of the belt conveyor Overall length: 2,500 mm Overall width incl. motor: 820 mm Overall width withou ...

<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt conveyor Specification no.: U1009424-V0091 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 Förderhöhendiff.: 500mm <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt Specification no.: U1009424-V0520 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

Conveyor belt / wire belt / mesh belt -Length: approx. 4350 mm -Working width: 300 mm -belts are similar to the pictures

Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of manufacture: unknown Condition: Used Model/Type: Strap Manufacturer: unknown total length: approx. 730 mm Total width incl. motor: approx. 760 mm Total width without motor: approx. 730 mm Belt width: approx. 600 mm Strap Type: Smooth Colour: Grey/ Blue Material: Stainless steel/ Aluminum Frame height: approx. 100 mm Drive type: Motor Includes SEW motor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics. For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to provide you with an individual offer or advise you on co ...

Pesa Feed Belt 1.2 m Belt Conveyor 60 cm Pesa Length: 1195 mm Belt width: 600 mm Ingress protection: IP54 3x400 VAC 0.37 kW 0.6 m/s Year: 2008 More items - new and used - can be found in our shop! International shipping costs on request!

Transnorm Belt Conveyor 1000-600-500 RA1281 The Transnorm belt conveyor is from 2013 and is in a new (used) condition. It is perfectly suited as a feeding belt and has a reflective light barrier with double lens (SICK WL100 P4430) to control the flow of goods. It has an engine of the brand SEW and MOVIMOT converter to control the speed. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Transnorm Type: B11 Built: 2013 Condition: as good as new (exhibition machine) Engine: fully functional Conveyor length (FL): 1000 mm Nominal/outer width (NB):600 mm Usable width (NUB): 540 mm Belt width (GB): 500 mm Engine Type: SEW Gear Motor + MOVIMOT Inverter Motor Power: kW 0.75/S1 Hz 50 A 1.90 Conveyor speed: adjustable from 2 to 90 m/min Drive: Head drive Weight: 80 kg Scope of delivery: without supports (if necessary plea ...

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any other angle adjustable, upper arch and supports customizable Condition: functional and visually good condition Features: Construction year: 2007 condition: very good (used) Conveying length in mm: 6449 ...

Data sheet Retrofit Pos. Tr 015 TRANSNORM strap foerers 800-600-500 Type TRANSNORM TS 1100 Laenge strap foerers 800 mm Total width 600 mm Strap width 500 mm Strap type E 8/2 gruen Drive station COMPACT Drive drum motor Type: TM 113 B25-434 Z, FU preprepared Power: 0.25 kW Voltage: 230/400 V, 50 Hz conveying speed 1.02 m/s Stuetzen without hustle and craps, please request if necessary Functional, visually good condition Features: Construction year: 1999 condition: good (used) Conveying length in mm: 800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: Van der Graaf Trommelmotor KW: 0,25/S1 Ampere: 0,71 Conveyor speed m / s: 1,02 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ih ...

Kannegiesser GF 2500-890-800 RA1255 The Kannegiesser belt conveyor is from 2014 and is in a new (used) condition. It has 13 white striped straps made of 2-layer PET on an edged, expiring stainless steel sheet construction. Technical data: Manufacturer: Kannegiesser Type: Belt conveyor 800 Built: 2014 Condition: very good (used) Engine: fully functional Length: 2500 mm (measurement stretched over everything) Belt width: 50 mm (13 pieces) Scaffolding width: approx. 890 mm Height/strip curve: from 175 mm up to 750 mm Number of support feet: 2 pieces on rollers Load: 30 kg Conveyor speed: 0.6 m / s constant Drive: Spur gear motor Electrical data: 0.37 kW 230 / 400 V 60 Hz Deflection drum: diameter = 50 mm, stainless steel Belt reel roll: diameter = 50 mm, stainless steel Belt: 2-layer PET belt, white Design: CNC - lasered and edged stainless steel sheet construction. Material: 1.4016  ...

Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: ...