134,009 used machines on RESALE, but how to find them? Machine Search
WJATECH WJA D096P A MA screen printing conveyor dryer built in Poland in 2020 is dedicated to the advertising industry, where efficient drying of prints on fabrics or textiles is required. Fast achievement of the right temperature and a conveyor belt with a large working space make the WJATECH screen printing dryer the best solution in this field. Technical specifications of the WJATECH WJA D096P A MA screen printing conveyor dryer - HMI panel: WEINTEK - main switch - power: 64 kW - working pressure: 6 bar - power supply: 3×400 VAC; 50 Hz - dimensions (L x W x H): 4500 x 2200 x 1700 mm - weight of machine: 900 kg
Ingersoll Rand D480IN-A Refrigerated air dryer 2020, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph
Drying cabinet vacuum tray dryer, tray dryer, Zschocke 630 liters I offer a vacuum drying oven from a liquidation. The drying oven is made entirely of stainless steel (food-safe) on the inside and allows drying under vacuum up to 1 mbar (depending on the drying material and connected pump). External heating is provided by a thermal fluid (water, oil). The heating circuit is absolutely tight, various attachments and flanges are available. The dryer was used to dry wood chips and is therefore not contaminated. The location of the device is Traben-Trarbach. Inspection possible, delivery in a radius of 200km possible by arrangement, otherwise only pick-up. Technical data: Boiler room capacity 630 litres, boiler room dimensions 780x1050x890mm³, number of heating plates 8, plate dimensions 730x1000mm², usable height between plates 85mm, 1 door with gasket Manufacturer Conrad Tschokke A ...
Used stainless steel batch fluid bed dryer made by Aeromatic model Stre-30 G-W101. New 1978. Swiss production Wirbelschicht - Trockenungsaniage - Capacity of 150 liters of water evaporation / hr. - A shower - The heat exchanger - A blower - There is a buffer tank - The control panel - Channels are filter - Two tanks interchangeable - Worked at the pharmacy (product unknown) - A bag filter, co channels - Removed, not running around. Year - Complete documentation and schematics - Dimensions: Wed. 90 cm, length 170 cm, the total size of approx. 3 m height. Approx. 170 cm
Used CAMES bottle dryer - Year 2001Technical Specifications & Performance DataThis pre-owned bottle drying tunnel is engineered to remove surface moisture from containers before downstream operations. Manufactured by CAMES, model TNN 1, it provides consistent air-blown drying to stabilize labels and packaging quality across a wide range of beverage production lines. Its continuous tunnel configuration supports steady throughput and uniform drying performance suitable for high-demand industrial packaging environments.Manufacturer: CAMESModel: TNN 1Year: 2001Machine type: Drying Tunnel (air-blowing)Primary function: Bottle surface drying prior to labeling and packagingContainer compatibility: Designed for PET and Glass bottle handlingOperating principle: Directed airflow across bottle surfaces in a continuous tunnelIntegration: Inline installation on conveyors between rinsing/filling and l ...
Ingersoll Rand D480IN-A Refrigerated air dryer 2011, 1.73Kw, coolant R407C-1, ambient temp +2/50'C, 1Ph
Availability: as of now Machine dimensions (LxWxH): 0.8 x 0.8 x 2.0 m Weight: 150 kg Bottle drying system was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel. Consisting of: - 1 Paxton high-performance centrifugal blower XT 500 4kW - 2 stainless steel heavy-duty air blades 580mm lg. - 2 stainless steel air blade holders for Adjustment in 3 levels - 1 stainless steel base frame with attached Blower - 1 stainless steel air distributor 2 x DN 76 mm - 1 soundproof enclosure for XT 500 blower - 4 stainless steel covers on all sides as Splash guard Additional equipment: - 1 pc. Geset stainless steel nozzle 40 x2 mm incl. piping and hose For lid blow-off before inkjet The Gesete XT 500 bottle drying machine was manufactured in 2014 and is designed for drying bottles in front of a labeling machine (Etima) ...
ATEX stainless steel 316 3V Tech 250 FPP/SD FM nucha filter dryer with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industry. Material Stainless Steel 316/316L Technical characteristics Model 250 FPP/SD FM Year of manufacture 2010 Working body pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume 3450 L Working pressure half-round/liner -1/+10 bar Working temperature of half round/shirt -25/+200 ºC Half-calf/shirt volume 80+20 L Filtration area 2.5 m2 Equipment Setup ATEX Electrical panels Bag filter Hydraulic power plant Centrifugal pump Transportation Information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 Kg Unused
Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
Forklift battery charger, industrial charger, forklift battery charger, industrial charger, charger for scrubber dryer -Manufacturer: Gansow, charger for scrubber-dryer -Type: E 24/24 DIGI-CONTROL -Input voltage: 230 V 50 Hz -Power: 24 V / 24 A -Dimensions: 340/250/H225 mm -Weight: 12.1 kg
Offered for sale is an M&R Economax D conveyor dryer. Heating capacity: 7.5kW, belt width: 610mm, heat chamber length: 1140mm. Dimensions X/Y/Z: approx. 2400mm/840mm/1350mm, weight: approx. 227kg. An inspection is possible by prior arrangement.
Heating- and drying oven for temperatures from +20°C up to 300°C. Special turnstile drive for 1L bulkhead jars, TwinDISPLAY. Max. loading of chamber: 300 kg.
Frozen in time Ltd Mini Lablyo Freeze dryer 2017, bench top freeze dryer with adjustable temp display, 20cm x 25cm deep ice condenser, chamber with 3kg ice capacity, condenser temp -55'C,
Specifications: - Operating pressure 16 bar - Inlet capacity up to 1100 m³/h - Refrigerant R 134 A - Drive 400 V / 2.95 kW - Space requirement approx. W 1550 x H 2200 x D 860 mm - Weight approx. 280 kg
I am selling a heating air drying tunnel BURKLE Model: Easy Dry JET 1300 Filter: TRDUE / 700 m3/h Fan 7,5kW / 6800m3/h / 35 m/s Working width 1400mm Overall length 6.00m Electrical connection 36.5kW Heating air system 12 bladder units Heating medium water up to 80°C Max. heating capacity 45 kW Max. temperature of heating surfaces 120°C Siemens Simatic Touch Control Panel Year of construction 2014. System NEW, already not used ! Available soon.
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
Vacuum Mixer/Dryer/Inclined Bucket Mixer Manufacturer: Drais Type TR 50 EX protected with chopper The mixing plant was opened in November 2008 Renewed by the Lödige company. Material stainless steel 1.4571 / stainless steel 1.4571 Electr. Connected load Drive Vibrator 10.5 kW Adjustable, 31.5 – 380 rpm 1445/2905 rpm Product room printing Product room Temp. Product space Content Double coat Double Jacket Content With head capacitor, Double-acting mechanical seal -1/+6 bar 300 °C 56.5 liters 6 bar 7 litres Weight approx. 2000 kg Length x width x height approx. 2200 mm x 1620 mm x 2065 mm Machine is in good condition ! From plant extraction, pilot plant equipment Installation and operating instructions, as well as electrical diagram and drawings available.
Lauber Wood dryer longitudinal ventilation, type 4 K-7, Chamber with stacking trolley Contents of the wood dryer: The wood dryer holds 1 parcel with a width of 1.40 m 1 parcel in height of 1.25 m 1 parcel in length of 6.40 m The wood dryer has a total gross volume of 11.2 m³. The wood dryer holds 7.2 m3 of wood net, based on a wood thickness of 50 mm, a stacking strip thickness of 20 mm and 90% width utilization with edged wood. External dimensions of the wood dryer excl. control cabinet: Width: approx. 1.60 m Height: approx. 1.90 m Length: approx. 7.50 m Heating capacity 24.0 kW More info on request
We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.
Dryer HERBOLD T 508 Rotor diameter: 500 mm Rotor width: 1200 mm kW: 30
Dryer / Centrifugal Dryer / Dry Cleaner Can be used for pre-shredded plastic waste (hard plastic, films), Throughput depending on the type of material approx. 0.5-2 t/h Drive power 30 kw
For sale is a robust and reliable industrial refrigeration dryer from the German quality manufacturer ALUP Kompressoren (model Oekodry DT 260). The device effectively removes moisture from the compressed air and thus protects downstream tools and machines. Technical data (according to nameplate): Manufacturer: ALUP-Kompressoren GmbH Model / Type: Oekodry DT 260 Year of Make: 1998 Permissible operating pressure compressed air: max. 16 bar Permissible compressed air temperature: max. 60 °C Operating voltage: 230 V (1 phase / 50 Hz, normal Schuko plug) Nominal consumption: 0.67 kW Refrigerant: R 134a (0.750 kg capacity) Equipment: Integrated automatic steam trap at the bottom of the front Condition & Use: Visually normal workshop condition with usual signs of use. Compact design, is currently ready for transport on pallet.
New washer/dryer Manufacturer Getinge Lancer Type GEW P 888-1 electrically heated, single-door version Goods to be washed, glassware and parts of bottling plants Chamber size: 805 x 770 x 805 mm (W x H x D) External dimensions 2,000 x 2,170 x 1,076 mm (W x H x D) Dimensions in disassembled state / min. clearance 2395 x 2100 x 1395 (W x H x D) Weight Approx. 1100 kg (without load) Housing wall stainless steel AISI 304 (1.4301), Ra < 0.9μm Frame AISI 304 stainless steel (1.4301), with adjustable feet. Version Single-door version with automatically operated vertical sliding glass door, for loading and unloading. • Loading area 900 mm • 2 independent washing levels GMP
Capacity: 1200 l/min Auction-ID: A1-49000-81
Pressure: 16 bar Motor: 0,9 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 510 x 860 x 790 Weight: 64 kg Compressed air connection: 1 1/2
Pressure: 16 bar Motor: 1,4 kW Free air delivery: 8 m³/min Measurement (WxHxD): 510 x 860 x 790 Weight: 75 kg Compressed air connection: 1 1/2
Pressure: 50 bar Motor: 0,33 kW Free air delivery: 1,2 m³/min Measurement (WxHxD): 370 x 470 x 520 Weight: 32 kg Compressed air connection: 3/8
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2
Pressure: 50 bar Motor: 1,5 kW Free air delivery: 5,25 m³/min Measurement (WxHxD): 550 x 880 x 610 Weight: 89 kg Compressed air connection: 1
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
Pressure: 14 bar Motor: 1,13 kW Free air delivery: 12 m³/min Measurement (WxHxD): 706 x 1065 x 1046 Weight: 145 kg Compressed air connection: 2
Pressure: 16 bar Motor: 0,57 kW Free air delivery: 6,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 55 kg Compressed air connection: 1 1/2
Pressure: 16 bar Motor: 0,3 kW Free air delivery: 1,4 m³/min Measurement (WxHxD): 350 x 490 x 450 Weight: 27 kg Compressed air connection: 1
SPECIFICATIONS: Installed power: 1 kW Maximum pressure: 14 bar Ambient temperature: max. 43 C Refrigerant: R410A
Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2
Pressure: 16 bar Motor: 0,11 kW Free air delivery: 0,4 m³/min Measurement (WxHxD): 350 x 490 x 450 Weight: 19 kg Compressed air connection: 1/2
Pressure: 16 bar Motor: 5,7 kW Free air delivery: 22 m³/min Measurement (WxHxD): 1390 x 1100 x 740 Weight: 265 kg Compressed air connection: 2 1/2
Pressure: 14 bar Motor: 3,22 kW Free air delivery: 35 m³/min Measurement (WxHxD): 703 x 1410 x 1150 Weight: 270 kg Compressed air connection: 2 1/2
Pressure: 16 bar Motor: 0,04 kW / 60 Hz Free air delivery: 0,93 m³/min Measurement (WxHxD): 525 x 1075 x 216 Weight: 36 kg Compressed air connection: 1/4
Pressure: 16 bar Motor: 0,15 kW Free air delivery: 1,4 m³/min Measurement (WxHxD): 337 x 665 x 593 Weight: 35 kg Compressed air connection: 3/4
Pressure: 16 bar Motor: 0,18 kW Free air delivery: 0,7 m³/min Measurement (WxHxD): 350 x 490 x 450 Weight: 21 kg Compressed air connection: 1/2
Pressure: 16 bar Voltage: M 05 Volt Free air delivery: 0,688 m³/min Measurement (WxHxD): 167 x 522 x 60 Weight: 3 kg Compressed air connection: 3/8
maximum number of results exceeded
please refine your search
50 € 
