belt dryer used for sale

Auction-ID: A1-50393-196

Auction-ID: A1-50750-429

Belt width 500 mm. Height adjustable. Viewing by appointment. Auction-ID: A1-40324-170

Pouring height: 200 cm Sold with small conveyor. Auction-ID: A1-50867-37

Specifications: - Product type: conveyor / belt conveyor - Version: horizontal conveyor belt - Tire type: rubber/plastic treaded tire - Belt surface: coarsely profiled / non-slip - Frame: steel construction - Frame colour: green - Electrically powered - CE components available - Length and bandwidth: to be measured Drive: - Engine brand: Transtecno - Engine type: TS711-4 - Engine serial number: 1705001 - Version: 3-phase asynchronous electric motor - Operating mode: S1 - Protection class: IP55 - Insulation class: F - Motor weight: approx. 5 kg - Cos φ: 0.73 Motor data at 50 Hz: - Power: 0.25 kW - Speed: 1,395 rpm - Voltage: 220–240 V Δ / 380–415 V Y - Current: 1.38–1.27 / 0.80–0.73 A Motor data at 60 Hz: - Power: 0.30 kW - Speed: 1,680 rpm - Voltage: 264–288 V Δ / 456–498 V Y Equipped with, among other things: - Profiled conveyor belt - Electric drive motor - Drive roller  ...

Complete with some various sanding belts Auction-ID: A1-50226-58

Function: for surface cleaning/structuring/marking or for cutting/welding Laser 1: Part number. 3248890 Laser 2: Part number: 3248890 Laser power: 100 W Wavelength: 1064 nm Computer Datec: with Windows 11 Pro 64 bit, type: CLX 24-06232 Auction-ID: A7-50858-3

Hydraulic spreader / straw distributor with cross belt – quick-change pickup Specifications: Brand: unknown Version: hydraulic spreader / straw distributor Large Stock/Cargo Box Hydraulically driven Internal horizontal dosing roller Dosing roller equipped with cleats Hydraulic cross/conveyor belt Green rubber conveyor belt Robust welded steel construction Suitable as an attachment for shovel, telehandler or front loader with suitable mounting Suitable for agricultural use and bedding of stables Features: Hydraulic hoses and quick couplings Quick-change pickup on the back Particularities: Condition: used, with signs of wear and wear Operation not tested Can be loaded. Auction-ID: A1-47393-351

Fitted: Bearings and rubbers replaced 7 years ago, and feeding trays replaced about five years ago Auction-ID: A1-47393-211

Hours: 01940,02 Power supply: 400 V, 3-phase, 50/60 Hz Largest Heater Load: 14.5 A Short Circuit Interrupting Capacity: 5,000 A CE marking Technical data: The 1707 MKIII has 7 upper and 7 lower heating zones with hot air convection. The heated process section is approximately 1.85 m, the maximum process temperature is 350 °C. As standard, printed circuit boards can be processed approximately 50–460 mm wide; the maximum transport speed is about 1.88 m/min. Please note: Lot 2 and lots 51-56 are sold only with reservations. The seller still has to confirm the bid Lot 2: the complete processing line. There you will also find a video on the individual process steps and machines Lot 51-56 Individual parts of the machining line. These are the same parts as Lot 2. Either Lot 2 OR Lot 51-Lot 56 is sold Auction-ID: A7-50858-55

Tipper with discharge belt and cross conveyor for the food processing industry, This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away., The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/foodeq-tvb400-4350/, Type: Tipper with discharge belt and cross conveyor, Belts: Blue food-safe  ...

Inclined conveyor for moving product in food processing lines, This Eillert TR-3700-400-425 is an inclined belt conveyor with a stainless steel frame and a blue plastic belt fitted with cleats. It stands on a mobile frame with adjustable feet, allowing the conveyor to be levelled and repositioned on site. The drive runs on 400V three-phase power and is fitted with its own control box with start-stop button. Eillert, based in Ulft in the Netherlands, is known as a manufacturer of processing machinery for the vegetable, fruit and potato sector., Located in Emmeloord, the Netherlands. Immediately available. Asking price: EUR 7,000., More photos and full specifications: stcfoodsolutions.nl/en/machine/eillert-tr-3700-400-425/, Type: Inclined belt conveyor, Belt: Blue plastic belt with cleats, Frame: Stainless steel, mobile, adjustable feet, Power supply: 400 V, three-phase, Controls: Own cont ...

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-486

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-485

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-487

MABO SPECIAL professional long belt sander, equipped with a long sanding table, an abrasive belt and an integrated suction system. Manufacturer: MABO, Rimini (Italy) Power supply: 380 V Equipment: long work table, abrasive belt, suction and emergency stop Visual condition: used workshop machine with visible signs of use. Auction-ID: A1-50714-4211

with Siemens frequency-controlled drives, belt width 1,400 mm, belt length 2,600 mm / 1300 mm, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself Auction-ID: A1-50766-484

Ribbon departer Maja Skinny, with table for open use, Connection 400V, dimensions LxWxH approx. 80x82x123cm, weight approx.: 200kg, good used condition, fully functional

• Electronic sectioned sanding pad with 56 sectors for wide belt sander • Dimensions of the unit: approx, 1600 x 150 x 260 mm • Sanding pad length approx, 1500 mm • It includes 2 control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-204

Belt dewarper Weber ASB 600/2, with ribbon and open use, 2 speeds, for an extra charge, the belt and the pressure wheels can be renewed, Connection 400V, dimensions LxWxH approx. 85x77x125cm, weight approx. 220kg, very good used condition, fully functional

Technical description : 2 UNITS SCRAP CONVEYOR SYSTEMS consisting of: - First unit being approx. 35 meters length - Second unit being approx. 40 meters length - Each having a drive unit, gearbox, reversing station - Conveyor width is approx. 1100mms - Conveyor height is approx. 1200mms. Both units were professionally dismantled, cleaned and stored carefully into containers in our warehouse in D-57258 Freudenberg some 140 km north of Frankfurt International Airport

Batch weigher, consisting of: elevating belt, plastic belt with dividers, belt width: 350 mm, 220 mm, divider height: 50 mm, distance between dividers: 90 mm, elevating height: 1700 mm, and Rewa weighing scale, type: 83Z, min/max weight: 0.04/60 kg, dimensions scale: 770 mm x 440 mm x 520 mm, total dimensions: 3200 mm x 1000 mm x 2130 mm.

• Lot of 2 electronic sectioned sanding pads with 56 sectors for wide belt sander • Dimensions of each unit: approx, 1600 x 150 x 260 mm • Sanding pad length  approx, 1500 mm • They include the control cards that appear in the photographs • Operating conditions of this machine: unchecked. • This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A7-50834-199

Transport system, consisting of, - transport belt, rubber belt, belt width: 600 mm, - steel platform, working height: 4800 mm, total dimensions platform: 2600 mm x 2270 mm x 5800 mm - platform with 2 bunkers, dimensions bunkers: (2x) 410 mm x 2250 mm x 600 mm, working height: 3300 mm, dimensions platform: 7100 mm x 6200 mm x 4400 mm.