belling machines used for sale

material width: 0200 mm material thickness: 3,00 mm no. of straightening rolls: 21 sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 30 mm speed: 56 m/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Hydraulic drive All rollers driven Side belt guide with handwheel PSS300 control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mm table width: 2000 mm burner heads: 1 laser capacity in Watt: 4 kW Capacity steel: mm Control: MicroStep total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - Working area: 4000 x 2000 mm + additional space for pipe cutting - Linear guides: Rexroth - Double-sided driven portal via racks: ATLANTA precision helical gearing on all axes - Gearbox: STOBER - Drives: Maintenance-free, processor-controlled AC servos from Panasonic - Maximum positioning speed: 130 m/min (one axis), 180 m/min (two axes simultaneously). Acceleration 10 m/s² Positioning speed of the Z-axis 50 m/min Travel distance of the Z-axis 150 mm Acceleration of the Z-axis 0.75 G Position deviation Pa 0.07 mm according to VDI/DGQ 3441 Repeatability Ps 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90% Machine in very g ...

Type F-2 Thickness of panel 10-55 mm Edging thickness 0,4-2 mm Feeding speed 13 m/min Air pressure 0,8 MPa Total install power 10 kW Panel width ≥ 80mm With pre-milling Transport dimensions 3700x600x1250 mm Weight 960 kg

Yamato 714 Multihead Weigher, Fully Stainless Steel | Rigidized |, Looking for a high-performance weighing solution for frozen or hard products? This Yamato 714 is a fully stainless steel, rigidized multihead weigher built for demanding production environments., Its flat feed chutes make it ideal for deep-freeze and hard items, preventing sticking or jamming. Optionally, we offer versions with angled chutes for lighter products such as vegetables or flat chutes for frozen products., The machine has been fully overhauled, thoroughly inspected, and is ready for immediate operation., ---------------------------------------------------------------, Specifications – Yamato 714, Weighing Heads - 14 heads, Weighing Range ~20 g up to 3,000 g (single dump); multi-dump possible, Speed - Up to 90 weighings per minute (product dependent), Chute Type - Flat chutes (ideal for frozen/hard product ...

With C axis Swing over bed Ø 610 mm Swing over slide Ø 360 mm Distance between centers on tailstock version 682 mm Maximum turning diameter Ø 500 mm Maximum part length 520 mm Maximum bar diameter Ø 65 Travel in X / Z 260 / 610 mm Spindle speed 5000 rpm Number of tool on turret 12 Tool holder type VDI30 Controller FANUC Oi TF

Width 72 cm Year of construction 2014 Pallet feeder FP 120 Pallet feeder with Vaculift and Vacubelt MC Control 1st station: 8 fold pockets 72 cm Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft Shed display partially overhauled - workshop tested - new folding rollers station 1 Machine condition: cleaned and checked Delivery date: immediately from stock

Key data: 1280 kN

Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm. Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.

Key data: 1800 kN

Clamping force: 180 t; 4-column toggle system; tie-bar spacing: 480×480 mm; platen size: 720×720 mm; mold height: 150–550 mm; opening stroke: 396 mm; ejector stroke: 130 mm; screw diameter: 60 mm (to be confirmed); injection volume: 678 cm³; 4 heating zones; power supply: 3×380 V–50 Hz; installed power: 45.3 kW; machine dimensions: 5950×1400×1920 mm; weight: 6700 kg; Machine No.: ED1020.

Key data: 800 kN

Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.

gebr. Long belt grinding machine JOHANNSEN T84 ST YOC 1990 Total connected load: 4.5 kW / 10.3 A Motor power: 3.8 / 4.5 kW 2 belt speeds (13.5 + 27 m/s) Table size: 270 x 80 cm electr. Table lift Belt dimensions: 150 x 7,100 mm Offset (both sides): 450x220 mm 2 sanding shoes Switch for clockwise/counterclockwise rotation Integrated lighting Extraction connection: 140 + 120 mm incl. various sandpapers Machine dimensions (approx. dimensions) W:400 cm D: 131 cm H: 141 cm Weight: approx. 700 kg The machine comes from a 1-man operation.

Max. size= 66 x 66 cm, Availability= 012026, Cutting Width 66 cm (26.4″ ) full programmable, easy-to-operate machine Push-Button Operation Digital Readout Safety Laser Beams LOT Loaded in truck or container

Stanko 2M55 Mk5 Admission in drilling-spindle (morse): Mk5 Max drilling capacity: 50 mm Base dimensions (1) Table dim (2) : 1650 x 830 mm Longitudinal travel drilling-head (X-axis): 1375 mm Height-travel arm (Y-axis): 1200 mm Max dist.round column -- drillingspindle: 1600 mm Speeds: 20 -> 2000 rpm Power on the spindle: 4.5 kW Cooling system: 4,7 ton

grinding length: 160 x 400 mm mechanical: ja weight of the machine ca.: 0,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 1600 mm tool adaptor: ja fabric-no.: 9787 weight: 4,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Maximale diameter onderdeel: 200 mm Balansringprocedures volgens ISO 1940 PC-gebaseerde grafische interface HSK 63 Gereedschapsinstelling: 9BB4KP00002000 Softwareversie: R150F09 make:: 230V Distance between centres :: 600 mm Weight of workpiece :: 20 Kg max

Key data: 1500 kN

Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.

Clamping force 135 t, toggle clamping system with 4 tie bars, tie-bar spacing 400 × 400 mm, mold height 150–500 mm, opening stroke 400 mm, ejector stroke 150 mm, screw diameters 45/50/55 mm, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, overall dimensions approx. 4,900 × 1,200 × 2,050 mm, weight approx. 5,000–5,700 kg. Machine No. 959.

Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm

grinding length: 6000 mm grinding width: 500 mm workpiece height: 250 mm speed of grinding head: 0,02 - 30 m/min table width: 700 mm segment head diameter: 630 mm grinding motor: 110 kW grinding wheel speeds: 1500 U/min magnetic clamping plate: 6200 x 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Precision vertical surface grinding machine equipped with : - segment grinding head - magnetic table 6200 x 200mm - inclinable - Traction drive grinding head by direct current via toothed rack - Coolant tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 5060 mm y-axis: 3200 mm z-axis: 1000 mm distance between columns: 2700 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5000 x 2400 mm workpiece weight: 18 t Control: FANUC 31i-MB total power requirement: - kW weight of the machine ca.: 45 t dimensions of the machine ca.: 12,6 x 6,5 x 4,15 m - CNC Control FANUC 31i-MB - Tool Changer 32-fold (BT 50) - 3 axes linear scales - Semi-auto universal head (C axis auto 5 degree indexing) - Extension head - Spindle oil cooler - Air conditioner for electrical cabinet - Hydraulic oil cooler - no coolant thru spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mm swing diameter: 680 mm turning height: 600 mm z-axis: 500 mm x-axis: 560 mm drive of main spindle: 65/80 kW main spindle speeds:: 2800 workpiece tool changer: 12 Plätze feeds z-axis: 0,01-30.000 mm/min feeds x-axis: 0,01-45.000 mm/min chuck: Rota NCR 630 mm coolant: voltage: 400 V frequency: 50 Hz control: Siemens 840 D pl total power requirement: 140 A weight of the machine ca.: 18 t dimensions of the machine ca.: 6,5 x 3,8 x 4,20 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm continious capacity: 25 mm throat: 315 mm bore stroke: 200 mm bore depth: 280 mm spindle taper MT: 4 feed range: 0,1-1,5 U/min number of feeds: 9 column diameter: ca. 230 mm table-size: 700 x 600 mm surface area: 450 x 560 mm distance spindle/base plate: 1100 mm dimensions: ca. 1000 x 700 x 2400 mm total power requirement: 2,6 kW weight of the machine ca.: 1,1 t emergency stop switch renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 345 mm bore stroke: 180 mm spindle turning speed range: 25-640 U/min column diameter: 180 mm table-size: Ø ca. 560 mm surface area: Ø 445 mm feeds: 0,1, 0,2, 0,3 mm/U spindle taper MT: 4 weight of the machine ca.: 1 t dimensions: ca. 650 x 1000 x 2100 mm with thread cutting device foot switch With coolant device in the base steplessly variable speeds, 2 gear stages, and 2 motor speeds The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Uhlmann C 130 horizontal cartoning machine ampoules / blister machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement guarantee mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Barcode reading of the folding box / package insert - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump / Venturi

Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement.

table length: 3048 mm table width: 1524 mm burner heads: 1 Control: CNC workpiece weight: 1095 kg traversing speed: 180 m/min weight: 4150 kg dimensions of the machine ca.: 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelli ...

x-travel: 710 mm y-travel: 250 mm z-travel: 400 mm table-size: 1200 x 300 mm control: konventionell tool adaptor: SK40 turning speed range: 50 - 2500 U/min quill stroke: mm total power requirement: 2,2 kW weight of the machine ca.: 1,7 t dimensions: 2,1 x 2,0 x 1,6 m Features: - Digital display - Coolant system - Huron milling head - Emergency stop device - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 4 Stk bore capacity in steel (diameter): 25 mm spindle distance: 475 mm table-size: 450 x 1900 mm morse taper: MK 4 total power requirement: 10,2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic

MAX DIAMETER 630 , MAX LENGTH 5000

Max. work-piece diameter: 254 mm Max. distance between centers: 1066 mm Max. length of grinding: 1041 mm Max. capacity of collet chuck: 38 mm Dimensions of standard grinding wheel: 408x25x205 mm Limits of grinding head turning: 45 degrees Centre tapers: Sea #4 Thread pitch: 0.42 – 305 mm Max. pitch correction: 0,1 mm on 100 mm of length Adjustable backing-off: 0-5mm Number of rotation speeds of grinding head: 20 Range of speeds of workpiece slide: 1/3 – 60 rpm Speeds on back-run: 25.4; 80 rpm or working speed Work-piece slide motor capacity: 0.75 HP Grinding head motor capacity: 3.5/1.25 HP Max. obliquity: 1:12 Width limits of grinding wheel: 9.5–75 mm Range of grinding wheel speeds: 850–1540 rpm Internal diameters processable: 19–228 mm Max. diameter of hobs: 178 mm Max. diameter of thread chasers: 254 mm Coolant tank capacity: 136 liters Dimensions: -L ...

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

Professional packaging machine from a renowned European manufacturer. Suitable for packaging catalogs, magazines and magazines, for example. The print product is fed to the machine and detected by a sensor. It is then automatically passed through the machine and foiled in the process. The packaged product is transported to working height via a conveyor belt. Technical data: -Packaging capacity up to 1200 products per hour. -220-230V / 50-60 Hz. -Forming shoulder machine. -Flat film of different thicknesses. -Sealing seam crosswise / back sealing seam lengthwise. -Independent hot-wire welding rails (impulse welding). -Electronic temperature control. machine can be moved and locked via castors. Setting options / options on the display: -piece and production counter. -Pressure longitudinal welding gun. -Pressure cross-welding gun. -Pressure guide wheels. -Welding time. - ...

Diameter of bending rollers 550 mm Drive Type Hydraulic Main motor power30 kW

Impressions=0 m, Condition= Very Good , Availability= 2025-12-23, Bobst Speria 106 Sheet Counter: 200 million Maximum format: 740 × 1060 mm Minimum format: 350 x 400 mm Maximum Speed: 7700 sheets/hour Pressure: 260 tons Stripping station CUBE control Centreline system for quick job changes Quick lock stripping frame Micrometric adjustment 1mm thin plate system Electronic sheet travel control Double-action stripping OS pull side lay OOS push side lay Make-ready table - stripping Non-stop delivery

pressure: - t stroke: - mm table-size: - mm total power requirement: - kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: - m : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRUMPF TruLaser 5040 6kW laser cutting machine was built in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded and maintained throughout its service life. A set of quartz tubes, all internal optics and the lamp were replaced in September 2022. A cleaning and calibration of the external optics, meanwhile, was performed in September 2025. All filters and oils were changed on an ongoing basis according to TRUMPF recommendations. Water was changed once a year, along with flushing of the CU and AL circuits. All these activities are confirmed by the corresponding service reports. The TRUMPF TruLaser 5040 (L18) laser cutting machine is the perfect choice for any industrial plant. It enables precision cutting of sheet metal made from, among others, steel, aluminium, copper and brass. Laser cutting is performed by means of a stable 6 kW laser b ...

AMADA LC-1212 ALPHA III laser cutting machine was built in 1999 in Japan by AMADA CO., LTD. The machine is used for precision machining of sheet metal with a maximum weight of 220 kg. Laser cutting is performed by means of a stable 2 kW laser beam, which guarantees the achievement of extremely smooth edges with no irregularities. All this is complemented by an advanced NC control and a laser source of the highest energy efficiency. The AMADA LC 1212 A3 laser cutting machine weighs 4500 kg. Technical specifications of the AMADA LC-1212 ALPHA III laser - laser power: 2 kW - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z axis: 1270/1270/300 mm - rapid traverse in the X/Y/Z axis: 80/80/60 m/min - working speed: 20 m/min - maximum sheet metal dimensions (L x W): 2540 x 1270 mm - maximum sheet metal weight: 220 kg - work table height: 820 mm - positioning accuracy: ± 0.01 mm - pos ...

MICROSTEP MSF-Pipe-T 6501.200L tube and profile fiber laser was built in 2018 in Slovakia by MicroStep spol. S.r.o. The machine, which is designed for precision cutting of tubes and profiles of various cross-sections and non-standard shapes, is an excellent choice for modern business. This is because a number of state-of-the-art technical solutions guarantee the most accurate cutting results throughout its entire service life. 2D or 3D cutting is performed by means of a stable 2 kW fibre optic beam, which is generated by a resonator of the highest energy efficiency. The 3D laser scanner accurately measures the workpiece before machining to determine its actual shape along the cutting trajectory. Advanced algorithms then allow the control system to appropriately adjust the movement of the cutting tool and supports, as well as compensate any workpiece inaccuracies. The work area is c ...

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 530 mm, 4 St.

Technical data/equipment: - Planing width approx. 530 mm - 4-knife shaft (strips) - Suvamatic planing shaft cover - Motor power 4 kW - Electric table adjustment - Suction nozzle Ø 160 mm - Swivelling dressing stop - Auxiliary stop for narrow workpieces - Weight approx. 910 kgTechnical data/equipment: - Planing width approx. 530 mm - 4-knife shaft (strips) - Suvamatic planing shaft cover - Motor power 4 kW - Electric table adjustment - Suction nozzle Ø 160 mm - Swivelling dressing stop - Auxiliary stop for narrow workpieces - Weight approx. 910 kg

faceplate diameter: 2950 mm swing diameter: 3200 mm turning height: 3500 mm table load: 20 t feed range: 3000 mm/min main drive motor: 70 kW milling drive: 16,1 kW Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control FAGOR 8070 C-axis with 360,000 positions Milling head Inspection under power in the factory possible. Machine location is Spain. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 5500 mm swing diameter: 6000 mm turning height: 4400 mm Control: FAGOR 8055 cross rail adjustment: 3000 mm ram adjustment: 1500 mm workpiece weight: 100 t faceplate speeds:: 1 - 25 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Retrofit in 2015 with CNC-control FAGOR 8055 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 1220 mm turning length: 5000 mm control: FAGOR 8055 TC swing diameter over bed slide: 880 mm spindle bore: 160 mm spindle turning speed range: 0 - 1000 U/min transmission ratio: 4 tailstock quill diameter: 180 mm tailstock quill stroke: 260 mm main drive motor: 40 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m In 2020 overhauled: - Grinding of carriage guides on the X and Z axes - Preloading of X and Z axis ball screw nuts - New Turcite placed on the X and Z axis carriages - General review and disassembly of the engine and head regulator - General review and disassembly of the motors and regulators of the X and Z axes - Disassembly and inspection of the SAUTER tool holder - Checking and cleaning the electrical cabinet - Complete review of the hydraulic circuit CNC-control FAGOR 8055 TC Tool turret SAUTER 4-jaw chuck Ø  ...

Key data: 4 , 180 mm, 120 mm

Used machine Workpiece width 180mm Workpiece height 120mm 4 spindles: 1) Horizontal bottom 180mm 3.7kW 2) Vertical right 120mm 4kW 3) Vertical left 120mm 4kW 4) Horizontal top 180mm 5.5kW Diameter of spindles 30mm

Filling machine Vemag Robot 500, Oil change vacuum pump made, without twisting gear, Connection 400V, 6.5kW, dimensions LxWxH approx. 85x60x145cm, weight approx. 410kg, used, older device, but in very good condition, fully functional

Slicer Graef Master 3020, with scale, Connection 400V, knife diameter 300mm, Dimensions LxWxH approx. 60x57x42cm, weight approx. 38kg Year of manufacture 2018, with signs of use, technically perfect condition

6 + 6 meter rollenbanen voorzien van handmatige achteraanslag en digitale uitlezing Rollenbanen zijn in hoogte verstelbaar. maximale breedte 500 mm inclusief verbindingsstukken om de rollenbanen aan uw machine te kunnen bevestigen

Biscuit forming machine Janssen FM128 K580S used Janssen FM 128K580S pastry forming machine with 600mm working width including 2 forming rollers. The machine is mobile on rollers, completely covered with stainless steel sheets. The machine is in good visual and technical condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - 60cm sheet size - With 2 forming rollers (optionally extra forming rollers) - With additional heating - Stainless steel cladding - Automatic sheet metal feeding - For trays: 60x40cm, 60x80cm or 60x100cm - Heating: 2 x 2000W - Connected load: 380 volts