beer tank used for sale

450 litre, Stock number: T3630, Litre: 450, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 2 pcs. legs, Top: Closed, Bottom: Conical, Tank cover: In the top, Inner diameter: Ø 1000 mm., Dimensions: B 1150 x H 1550 mm., Manufacturer: Helsted Maskinfabrik, Year: 1975

550 litre, Stock number: T3629, Litre: 550, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with strengthening ring, Bottom: Conical, Pump: Centrifugal pump in the bottom, Inner diameter: Ø 1000 mm., Outer diameter: D 1200 mm., Total height: H 2050 mm.

600 litre, Stock number: T3628, Litre: 600, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open with strengthening ring, Bottom: Conical, Agitator: From bridge at the top, Agitator type: 3-bladed propeller, Motor: 3 kW - 230/400 Volt - 51 rpm., Turbolence plate: 4 pcs., Inner diameter: Ø 940 mm., Total height: H 1750 mm.

21.500 litre, Stock number: T3621, Litre: 21.500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical 15°, Bottom: Conical 20°, Tank cover: In the top, Ø 500 mm., Working temperature: 0-+50°C., Working pressure: Unpressurized, Scope of application: A, Inner diameter: Ø 2500 mm., Total height: H 5330 mm., Density: 1.0, Plate type: Stained type B2, Inner finish: All weldings are sanded grain 60, Outer finish: All weldings are sandblasted, Manufacturer: Handing, Other: 3 pcs. connection pieces

3.800 litre, Stock number: T3618, Litre: 3.800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: On legs, End bottoms: Oval, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 430 mm., Agitator: Yes, from the top, Dimensions: L 2450 x W 1800 x H 1350 mm., Manufacturer: Packo, Model/type: REMDX, Year: 1996

1.000 litre, Stock number: T3611, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: På 4 stk. ben, Top: Open with strengthening ring, Bottom: Dished, Agitator: Yes, Agitator type: 3-bladed propeller, Motor: 1,5 kW - 220/380 Volt - 220/920 rpm., Inner diameter: Ø 1000 mm., Total height: H 2150 mm.

Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph

15.000 litre, Stock number: T3610, Litre: 15.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm. and in the side 400 x 500 mm., Turbolence plate: Yes, 3 pcs., Agitator: Flange for agitator in the top, CIP: Yes, 2 pcs., Working temperature: 50 °C, Working pressure double jacket: 45 Baro, Working temperature double jacket: 80 °C, Inner diameter: Ø 2200 mm., Outer diameter: D 2400 mm., Total height: H 5200 mm., Manufacturer: Gjettermann & Nielsen, Year: 1986

5.000 litre, Stock number: T3607, Litre: 5.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm. In the side, 400 x 500 mm., Turbolence plate: 3 pcs., Agitator: Yes , Agitator type: Ekato agitator, 3-bladed propeller, Motor: 1,5 kW - 220/380 Volt - 295 rpm., CIP: 2 pcs., Working temperature: 20° C, Inner diameter: Ø 1600 mm., Outer diameter: D 1750 mm., Total height: H 4960 mm., Manufacturer: Gjettermann & Nielsen, Year: 1985

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

10.500 litre, Stock number: T3608, Litre: 10.500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 420 mm. and the side, Ø 350 x 500 mm., Turbolence plate: 4 pcs., Agitator: Yes, Agitator type: 3-bladed propeller with bottom guideway, EKATO, Agitator placement: In the side, Motor: 2,2 kW - 220/380 Volt - 440 rpm., Inner diameter: Ø 2100 mm., Total height: H 3980 mm.

26,000 litre milk tank / agitator tank / storage tank made of V2A Properties: Volume 26000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Cylinder height 4500 mm Diameter 3400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Topsoil: Clapper bottom 2 crane eyes Level measurement 1/2" CIP line with CIP cleaning Tank cylinder: Manhole 450 x 370 mm Agitator mixer Stelzer type SN-63 H D2 - side with propeller (for tank ST2 right, for tank ST1 left) Socket 1/2" Subsoil: Clapper bottom with foot ring Outlet surround with flange connection Sensor for level measurement Important note: The agitator installed here contains a seal that must be protected from dry running.

7.500 litre, Stock number: T3606, Litre: 7.500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the side, 500 x 400 mm., Turbolence plate: 2 pcs., CIP: Yes, Working temperature: 20° C, Inner diameter: Ø 1600 mm., Outer diameter: D 1750 mm., Total height: H 5020 mm., Manufacturer: Gjettermann & Nielsen, Year: 1986

40,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 40000 L Material V2A (AISI 304) 1.4301 Insulation 100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6300 mm Cylinder height 4500 mm Diameter 3900 mm Number of feet 6 Description: Topsoil: Curved bottom 2 crane eyes CIP ball on the side Level measurement with socket 1/2" Agitator agitator decentralised with 4 paddle stages Manhole Ø DN 440 Breathing nozzle Ø 700 mm with condensation drain 2 x CIP Ball Subsoil: Flat bottom with small cone bottom at the front forward-drawn residual drain pipe with flanges DN80 6 tube feet with spherical plates - height adjustable with base plate

3.350 litre, Stock number: T3604, Litre: 3.350, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 420 mm., Agitator: Flange for agitator in the side (See R1112), CIP: Yes , Inner diameter: Ø 1500 mm., Outer diameter: D 1620 mm., Total height: H 2800 mm.

2.000 litre, Stock number: T3597, Litre: 2.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the top, Ø 455 mm., Agitator: Yes, Agitator type: 2 pcs. mixing rotor, Motor: 1,1 kW - 230/400 Volt - 55 rpm., Inner diameter: Ø 1100 mm., Total height: H 3700 mm., Manufacturer: Pasilac

30,000 liter agitator tank / storage tank insulated from V2A Properties: Volume 30000 L Material V2A (AISI 304) 1.4301 Insulation 60 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 6000 mm Cylinder height 3700 mm Diameter 3900 mm Number of feet 4 Description: Topsoil: Curved bottom CIP Ball Guiding Beam CIP Ball Sensor for level measurement Threaded Socket DN65 Stick Agitator Mixer with Propeller Manhole Ø DN 480 Ventilator DN 300 Tank cylinder: Tasting tap Subsoil: Cone base Outlet surround with disc valve DN80 Sensor for level measurement 4 profile feet with domes - height-adjustable with base plates

10.000 litre, Stock number: T3593, Litre: 10.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 500 mm., Inner diameter: Ø 2400 mm., Outer diameter: D 2520 mm., Total height: H 3600 mm., Manufacturer: Pasilac Therm, Model/type: 7342-10000, Other: Prepared for electric heating

60,000 litre service water tank UTH made of V2A insulated horizontal Properties: Volume 60000 L Overall length 6100 mm Cylinder length 4500 mm Total height 4300 mm Diameter 4200 mm Material V2A (AISI 304) 1.4301 Insulation 150 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: Tank crest: CIP Ball Ventilation nozzle In front: Level indicator with scale Manhole 440 x 340 mm Ladder hooks Residual drain with disc valve Thermometry Subsoil: 4 trumpet feet with domes - height adjustable with bearing cup stiffener Thermometry Behind: Connection Thermometry

1.200 litre, Stock number: T3588, Litre: 1.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Closed, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, 500 x 380 mm., Turbolence plate: 1 stk., Agitator: 2 pcs., Agitator type: Anchor agitator, screw agitator, Motor: 3,5 kW - 220/380 Volt - 1-20 o/min., 2,5 kW - 220/380 Volt - 58-290 o/min., CIP: 2 stk., Working temperature: 20° C, Working temperature double jacket: 100° C, Working pressure: 1 Bar, Inner diameter: Ø 1240 mm., Outer diameter: D 1440 mm., Total height: H 2600 mm., Manufacturer: Grenaa Rustfrit Staal aps, Year: 1986

7.000 litre, Stock number: T3580, Litre: 7.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Heating coil: Yes, Insulated: Yes, Outer cladding: Riveted, Tank cover: In the top, Ø 500 mm., Inner diameter: Ø 1790 mm., Outer diameter: D 1900 mm., Total height: H 4120 mm.

3,000 litre agitator tank made of V2A Properties: Volume 3000 L Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Total height 3500 mm Cylinder height 2000 mm Inner diameter 1350 mm Width 1500 mm Number of feet 3 Vertical design Last use of additives Description: Topsoil: Inclined cone base Level measurement Filling line pulled down Thermometry CIP Ball Manhole Ø 450 mm Agitator with propeller Ventilator Ø 350 mm Tank cylinder: CIP ball at the bottom of the agitator propeller Agitator type R132S - 8/4 PRG motor. No. 82/495 Flow breakers around propellers Perforated Pipe Tube Subsoil: forward-drawn residual drain pipe with disc valve Thermometry 3 trumpet feet with dome height adjustable with stiffeners on the legs and bottom

1.400 litre, Stock number: T3559, Litre: 1.400, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Insulated: Yes, Outer cladding: Riveted aluminum, Working temperature: 0-90° C, Working pressure: -1 - +3 Bar, Inner diameter: Ø 1100 mm., Outer diameter: D 1250 mm., Total height: H 2000 mm., Manufacturer: Svensk SLS, Year: 2008, Other: The tank is slightly dented in the outer cladding

1.400 litre, Stock number: T3558, Litre: 1.400, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Insulated: Yes, Outer cladding: Riveted aluminum, Inner diameter: Ø 1100 mm., Outer diameter: D 1250 mm., Total height: H 2070 mm.

16,000 litre milk tank/ agitator tank / pre-stacking tank Properties: Volume 16000 L Material V2A (AISI 304) 1.4301 Total height 3500 mm Cylinder height 2800 mm Inner diameter 2900 mm Outer diameter 3100 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Tank was used for the pre-stage of finished product. Topsoil: Inclined cone base 2 crane eyes CIP Cleaning Vent nozzle Thermometry Tank cylinder: insulated 6 cm Manhole 450 x 350 mm Agitator mixer Stelzer type DRK6P/12 with propeller CIP ball under the agitator Thermometry Level measurement Subsoil: Flat bottom with 3% slope Residual drain pipe with flanges Motor Tank 1/4 - Agitator to the left of Manhole Agitator Mixer Stelzer Type DRK6P/12 No.39139 IP44 Re Art. S1 7.571.5 kW 970/480 rpm 50 Hz 380 V YY/Y switch. 16 ...

400 litre, Stock number: T3557, Litre: 400, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs, Top: Open with lid and strengthening ring, Bottom: Conical, Agitator: Edge-mounted, Agitator type: Propeller, Motor: 0,25 kW - 220/380 Volt - 930 rpm.., Inner diameter: Ø 790 mm., Total height: H 1565 mm.

S58 - used approx. 67 m³ / 67.000 L steel tank, standing. Technical details: Content: approx. 67 m³ / 67,000 litres Material: Steel tank single-walled Manufacturer: GEMS Metaalwerken Dimensions: approx. Ø 3.00 m × H Tank 9.90 m / H incl. railing 11.50 m Other: Used steel tank, professionally cleaned and in good condition. Vertical storage tank with flat bottom, dome on the tank body and on top of the roof, several inlets and outlets. Tank repainted from the inside in reddish brown (with a paint for the interior paint Brantho-Korrux "3 in 1", anti-rust paint, metal protection paint, maintenance paint, Brantho-Korrux 3in1 may be used according to the regulations of the Federal Health Office (XL) for the interior coating of food containers and food processing machines (tested by Lab. Dr. Kittel 01/1989). Only the pure tank is sold, without add-on parts such as pipes, fit ...

1.250 litre, Stock number: T3552, Litre: 1.250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cooling tank, Standing: Frame with 6 pcs. legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Motor: Cooling compressor, Inner diameter: Ø 1300 mm., Outer diameter: D 1420 mm., Dimensions: L 2170 x H 1200 mm., Manufacturer: Alfa Laval

4.000 litre, Stock number: T3546, Litre: 4.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg console with 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Tank cover: In the top, Ø 400 mm., Agitator: Yes, Agitator type: Frame agitator from the top with bottom guide way, Motor: 2,2 kW - 400 Volt - 20 rpm., Inner diameter: Ø 1500 mm., Outer diameter: D 1550 mm., Total height: 4350 mm.

3.000 litre, Stock number: T3545, Litre: 3.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Tank cover: In the top, Ø 400 mm., Agitator: Yes, Agitator type: Frame agitator from the top with bottom guide way, Motor: 2,2 kW - 380/440 Volt - 25 rpm., Working temperature: Max 134° C, Working temperature double jacket: Max 120° C, Working pressure: 2 Bar, Working pressure double jacket: 1 Bar, Inner diameter: Ø 1400 mm., Outer diameter: D 1450 mm., Total height: H 4230 mm.

Lamella water sedimentation tank 7000 lt/Hour Stainless steel 304, 4mm thickness

1.300 litre, Stock number: T3543, Litre: 1.300, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Closed, Double jacket: 2 pcs. on shroud, Heating coil: Yes, Insulated: Yes, Outer cladding: Riveted aluminum, Tank cover: In the top, Ø 310 mm., Turbulence plate: 2 pcs., Agitator: Yes, Agitator type: Stamo Turbine stirrer, Motor: 3 kW - 220/380 Volt - 700 rpm., Inner diameter: Ø 1000 mm., Outer diameter: D 1150 mm., Total height: H 3150 mm.

2.200 litre, Stock number: T3544, Litre: 2.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: Leg konsol with 4 pcs. of wheels, Top: Dished, Bottom: Dished, Double jacket: Yes, Tank cover: In the top, Ø 400 mm., Turbolence plate: Yes, Agitator: Yes, Agitator type: Frame agitator from top with bottom guideway, Motor: 4 kW - 380 Volt - 50,7 rpm., Inner diameter: Ø 1200 mm., Outer diameter: D 1250 mm., Total height: H 2610 mm.

770 litre, Stock number: T3542, Litre: 770, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On leg consol, Top: Dished, Bottom: Dished, Double jacket: Yes, Heating coil: Heating/cooling coil, Insulated: Yes, Outer cladding: Riveted cladding, Inspection cover: In the top, Ø 200 mm., Agitator: Yes, Motor: 1,5 kW - 220/380 Volt - 240 rpm., Inner diameter: Ø 786 mm., Outer diameter: D 926 mm., Dimensions: L 1350 x W 1350 x H 3250 mm., Manufacturer: K.A. Ekström & Son, Year: 1964

500 litre, Stock number: T3541, Litre: 500, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, closed and boltet, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Aluminum, Tank cover: In the top, Ø 200 mm., Agitator: Yes, from the top, Motor: 1,1 kW - 220/380 Volt - 930 rpm., Working temperature: Max 148° C, Working pressure: Max 2 Bar, Inner diameter: Ø 800 mm., Outer diameter: D 900 mm., Total height: H 1480 mm.

1.000 litre, Stock number: T3540, Litre: 1.000, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Riveted aluminum, Inspection cover: In the top, Ø 250 mm., Turbolence plate: 2 pcs., Agitator: Yes, Agitator type: Stamo Turbine stirrer, Motor: 3 kW - 380/420 Volt - 700 rpm., Inner diameter: Ø 990 mm., Outer diameter: D 1190 mm., Total height: H 2715 mm.

600 litre, Stock number: T3539, Litre: 600, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Standing: 4 pcs. of legs, Top: Open, Double jacket: Yes, Agitator: Yes, Agitator type: Horizontal frame agitator with scrape, Motor: 0,71/1,3 kW - 380/420 Volt - 700/1330 rpm., Inner diameter: Ø 1050 mm., Dimensions: W 1900 x H 1970 mm., Manufacturer: DE DANSKE MEJERIERS MASKINFABRIK

1.000 litre, Stock number: T3528, Litre: 1.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 stk., Item: Tank, Standing: 4 pcs. legs, Top: Open, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: From bridge at the top, Motor: 0,55 kW - 220/380 Volt - 1410 rpm., Inner diameter: Ø 1150 mm., Outer diameter: D 1220 mm., Total height: H 1500 mm.

Material: stainless steel, stainless steel type: 1.4301, volume: 1900l. Including agitators. An on-site inspection is possible.

470 litre, Stock number: T3527, Litre: 470, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open, Bottom: Dished, Double jacket: Yes, Agitator: Yes, Agitator type: Frame agitator from the top, Motor: 3 kW - 220/380 Volt - 30 rpm., Inner diameter: Ø 900 mm., Outer diameter: D 960 mm., Total height: H 2150 mm.

BIG hook lift container with 5000 l tank

250 litre, Stock number: T3519, Litre: 250, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. of legs with wheels, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 300 mm., CIP: Yes, Working temperature: 0 - 90° C, Working temperature double jacket: 0 - 133° C, Working pressure tank: -1/0 bar, Working pressure double jacket: 3 bar, Inner diameter: Ø 650 mm., Outer diameter: D 800 mm., Dimensions: L 900 x W 750 x H 2000 mm., Manufacturer: SRS, Model/type: PVX1/DJ 250, Year: 2003

1.200 litre, Stock number: T3509, Litre: 1.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 400 mm., Agitator: Yes, Agitator type: 3-bladed propeller, Motor: Scaba, D30T-M2, 1.8 kW, CIP: Ja, Inner diameter: Ø 1100 mm., Outer diameter: D 1200 mm., Total height: H 2400 mm.

800 litre, Stock number: T3500, Litre: 800, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: 4 pcs. legs, End bottoms: Dished, Insulated: Yes, Outer cladding: Riveted aluminum cladding, Inspection cover: In the top, Ø 180 mm., Inner diameter: Ø 980 mm., Outer diameter: D 1180 mm., Dimensions: L 1520 x H 1500 mm.

Various barrels are available. 1) 12x as-new Speidel barrels with accessories. 2) 3x stackable tanks C. F. Maier KK, year of manufacture: 2004, capacity: 650l. An on-site inspection is possible.

800 litre, Stock number: T3499, Litre: 800, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Inspection cover: In the top, Ø 245 mm., Agitator: Flange for agitator in the top, Working temperature: 0 - 133° C, Working pressure: 2.0 Baro, Inner diameter: Ø 740 mm., Outer diameter: D 840 mm., Total height: H 2530 mm., Manufacturer: KOFA, Year: 1987

3.200 litre, Stock number: T3489, Litre: 3.200, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 400 mm., Agitator: Yes, Agitator type: Mixing wing, Motor: 0,55 kW - 380/420 Volt - 25 rpm., Inner diameter: Ø 1800 mm., Outer diameter: D 1900 mm., Total height: H 2130 mm., Manufacturer: Wedholms, Year: 1979

4.000 litre, Stock number: T3483, Litre: 4.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tank, Lying: 4 pcs. legs, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., Agitator: Yes, Agitator type: 2 pcs. 4-bladed mixing wings with bottom guideway, Motor: 0,55 kW - 380/420 Volt - 46 rpm., CIP: Washingwing, Inner diameter: Ø 1410 mm., Outer diameter: D 1530 mm., Dimensions: L 2670 x H 2080 mm., Manufacturer: Wedholms, Model/type: DF 85 AD

2.750 litre, Stock number: T3478, Litre: 2.750, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: 4 pcs. legs, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., Agitator: Yes, Agitator type: 2 pcs. 4-bladed mixing wings, Motor: 0,55 kW - 230/400 Volt - 46 rpm., CIP: Washing wing, Inner dimensions: L 2030 x W 1460 x H 1180 mm., Outer dimensions: L 2130 x W 1560 x H 1780 mm.