bed type milling used for sale

Automatic sub-u. Upper feeder Top rolled rivet, shank diameter bottom record cap 10 mm The rivet length is variably adjustable With cross-light target facility Safety trigger The machine is in very good condition, as the machine was only used for a short time

Packaging line Ishida / Prewa The packaging line was used for packaging accessories. Available now. The facility consists of: 1 St. Ishida multihead weigher (10 heads), built in 2004 1 St. Ishida multihead weigher (10 heads), built in 2003 1 St. Prewa vertical packaging machine (type 25/40), built in 2005 2 Z-shaped conveyor belts 2 St. vibrating gutters 1 piece of bunker tape

Rovema Type GS+ SPA 644+DAS 128 Year of construction 1998 Outer carton folding, lid folding and packaging

Rovema Type ETO Year of construction 2009 Outer carton folding and packaging

Mixers, make Haarup, planetary mixers = - Make Haarup, type 2250/1500 (2,250 l mixer) - 75 kW, dead weight 6,600 kg - Condition very well maintained and maintained - Available from the end of August 2026

General SKU291Y830 MakeJohnson LocationBarneveld Main Features MaterialRubber Lined Volume20000 Ltr. Motor1.1 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity± 20 m³/h With motor1,1 kW (230/400 V 680 rpm) InletDN40 OutletDN40 Eccentric Screw Pumps MaterialRubber, Stainless steel 1.4408 General Floorspace0,75 x 0,36 m Total height0,4 m Weight50 kgPaints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicJohnsonIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersPumps > Eccentric Screw PumpsIndustries > Food & Feed > Feed addit ...

Lift-tilt device, lifting tipper Make Itec, type 2700, built in 2017 for 200 and 300 litre standard loading trolleys Max. lifting capacity: 350 kg Dumping height: 2,231mm incl. 1 standard loading trolley 3x460V 50 Hz 0.75 kW - very good condition, hardly used - Was used to feed a piston filling machine - Documentation/operating instructions available Viewing possible in Korntal-Münchingen

Key data: 1000 kN, 157 g/PS, 42 mm

1.0 pcs. Two-component injection moulding machine electric Manufacturer: DR. BOY Type: 100E Type: 552 Year of Make: 2017 Clamping force: 100 tons Spar spacing (hxv) 430 x 360 mm Installation height MIN. 250 mm Screws DN 1: 42 mm Moulded part weight 1: 157.6 g/hp Screws DN 2: 24 mm Moulded part weight 2: 39.1 g/hp Control: PROCAN ALPHA Equipment: 1 x Core Pull Highly wear-resistant plasticizing unit Control Pneumatic Needle Gate Nozzle Dryer, manufacturer: FARRAG, year of manufacture: 2016

machine number type model year clampingforce distance between openingstroke screw shotvolume tiebars diameter ton mm mm mm cm3 1 2000-1450 S+ 2011 200 530x530 550 62 845 E-screwdrive 2 2000-850 S+ 2012 200 530x530 550 52 499 E-screwdrive 3 2000-850 S+ 2012 200 530x530 550 45 374 E-screwdrive 4 2500-850 S+ 2006 250 585x585 575 45 374 E-screwdrive 5 2500-1450 S+ 2009 250 585x585 575 62 845 E-screwdrive 6 3300-2150R S+ 2010 330 630x630 620 62 513 E-screwdrive 7 3300-5650 SXS 2006 330 630x630 620 84 1247 E-screwdrive 8 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 9 4400-3550 S+ 2010 440 730x730 720 72 1547 E-screwdrive 10 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 11 4400-5650R-2K SXS 2007 440 845x845 850 84 1247 E-screwdrive 12 4400-5650R S+ 2008 440 730x730 720 84 1247 E-screwdrive 13 4400-5650 S+ 2009 440 730x730 720 84 249 ...

HAHNDORF Type SEW 52/300mm / Groove Shaping Machine -Keyway slotting machine suitable for slotting inner keyways into gears / Pulleys or hubs. -Stroke length max. 300mm -Groove width max. 32mm -Cutting speed 5 meters/minute - Return approx. 5 meters / minute -Face plates / table diameter approx. 380 x 300 mm -Smallest bore with spec. Bumper blade 6mm -With plunger inserts 20mm -With normal bumper 60mm -Drive power 1.1 KW -Bumper with bumper insert -Connection cable Dimensions: LxWxH 1.2x0.6x1.6 meters / Weight 350Kg

AEG Double Grinding and Polishing Machine – Type DP 300/2200 -Operating voltage: 380 V -Motor power: 2.2 kW -Max. disc diameter: Ø 300 mm -Max. pane width: 50 mm -Polishing spindle speed: 1,400 rpm Dimensions: LxWxH 1.2x0.4x0.9 meters / Weight 180Kg

for sale 30 units nozzoles Fram

CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 CTP Computer to Plate Heidelberg Topsetter 102 Type 2310 Baujahr / Year 2001 - Serial-No. 013940157 Plate Format min. 370 × 323mm - max. 930 - 1140mm Plate thickness 0.15 - 0.40mm Up to 15 plates/h Auto loading Without RIP and Dongle. Up to 15 plates/h

Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.

Key data: 3050 mm, 20 mm, 800 mm

Hydraulic Sheet Metal Shear / Hydraulic Guillotine Shear Make: Steiner Type: HTS 30/20 Year of manufacture 1978 -Cutting length: 3050 mm -Cutting thickness: 20 mm -Back gauge: 800 mm, via handwheel - Motor power: approx. 30 Kw -Spare blade Basic machine: 4650 mm long, 2610 mm wide, 3200 mm high Weight: approx. 27,000 kg -Mechanical, in good condition- -Optical, in good condition- Hydraulics leak slightly no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense

Model: P3700 Auction-ID: A7-50081-46

This 3-axis Soraluce SM 8000 Bed Type Milling Machine was manufactured in 1999. It features an impressive X-axis travel of 6,250 mm, Y-axis travel of 1,200 mm, and Z-axis travel of 1,500 mm. The machine includes a spacious table dimension of 8,000 x 1,100 mm and a powerful 30 kW spindle. If you are looking to get high-quality milling capabilities, consider the Soraluce SM 8000 machine we have for sale. Contact us for further details.

This 3-axis MTE BF 4200 was manufactured in 2002. It features an impressive X-axis travel of 4,000 mm and Y-axis travel of 1,200 mm, with a robust table size of 4,200 × 1,000 mm and a maximum table load of 13,000 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 4200 bed type milling machine we have for sale. Contact us for further details.

This 3-axis MTE BF 2200 Bed Type Milling Machine was manufactured in 2004. It features a substantial X-axis travel of 2,000 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a large table size of 2,200 × 1,000 mm and can handle a maximum table load of approximately 7,200 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 2200 machine we have for sale. Contact us for further details.

This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machines transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information.

This 4-axis GORATU G Master 31 was manufactured in 2006. It features a large table of 3000 x 900 mm, capable of handling a maximum weight of 6000 Kg. The machine offers extensive travel with 3000 mm on the X-axis, 900 mm on the Y-axis, and 1500 mm on the Z-axis. It includes a 24-slot tool changer and a powerful main motor of 22/27 kW. Contact us for more information about this machine.

This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine.

This 4-axis JOBS FRAZER cnc milling machine was manufactured in 2017. It features a large fixed table of 3100x1000 mm and high-speed axes capable of up to 35 m/min, ensuring efficient machining. The machine includes a Heidenhain iTNC 530 HSCI CNC for precise control and a 24-position disc tool magazine. If you are looking to get high-quality milling capabilities, consider the JOBS FRAZER machine we have for sale. Contact us for more information.

This 3-axis Parpas MT100 was manufactured in 1995, featuring a large working envelope of 3500x2000x1000 mm and equipped with 2 cast iron teams. Ideal for complex milling tasks, consider the opportunity to buy this Parpas MT100 Bed Type Milling Machine. Contact us for more information.

This 3-axis Parpas SL100 Bed Type Milling Machine was manufactured in 1989. It features a large working envelope of 2500x1500x1000 mm and is equipped with 2 steel teams. Consider the opportunity to buy this Parpas SL100 Bed Type Milling Machine. Contact us for more information.

This 3-axis VHF CAM 2030 Bed Type Milling Machine was manufactured in 2004. It features a substantial weight of 450kg, ensuring stability and robust performance for precision milling. Consider the opportunity to buy this VHF CAM 2030 Bed Type Milling Machine. Contact us for more information.

This 3s JOBS THORA RT Bed Type Milling Machine manufactured in 2016 features a robust table measuring 1,200 mm by 1,200 mm, accommodating workpieces up to 5,000 kg. With a spindle speed of 5,000 rpm and a tool magazine capacity of 40 tools, it offers efficient milling capabilities. Consider the opportunity to buy this JOBS THORA RT Bed Type Milling Machine. Contact us for further details.

This 3-axis TIGER TFA6 Bed Type Milling Machine was manufactured in 1998. It features a longitudinal travel of 2000 mm, transversal travel of 1000 mm, and vertical travel of 1000 mm. The machine is equipped with a Heidenhain TNC 426 CNC, a manual bi-rotary head, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the TIGER TFA6 machine we have for sale. Contact us for further details.

Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible.

This 3-axis DEBER BTM 5A was manufactured in 2000. It features a continuous rotary table with a size of 1,500 x 1,000 mm and a maximum spindle speed of 3,000 rpm. The machine is equipped with a twin-spindle head and an automatic tool changer, enhancing its operational efficiency. If you are looking to get high-quality honing capabilities, consider the DEBER BTM 5A horizontal honing machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-20 bed type milling machine was manufactured in 2005. It features a substantial table size of 2,000 x 800 mm with a maximum table load of 4,000 kg. The machine offers impressive X-axis travel of 2,000 mm and rapid traverse speeds of 25,000 mm/min. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-20 machine we have for sale. Contact us for further details.

This 3-axis Soraluce TA-A20 bed type milling machine was manufactured in 2005. It features a longitudinal traverse of 2,000 mm, a cross traverse of 1,000 mm, and a vertical traverse of 800 mm. The machine is equipped with an automatic indexing head and a spindle speed range of 20 to 4,000 rpm. If you are looking to get high-quality milling capabilities, consider the Soraluce TA-A20 machine we have for sale. Contact us for further details.

This 3-axis ALESA MONTI MAF45 was manufactured in 1992. It features an impressive X-axis travel of 1,900 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 700 mm. The machine is equipped with a universal head and has a maximum spindle speed of 2,000 rpm. If you are looking to get high-quality machining capabilities, consider the ALESA MONTI MAF45 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis Auerbach FBE 3000 Bed Type Milling Machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of handling a maximum table load of 10,000 kg. The machine is equipped with a multi-position milling head KFM 1, a tool holder SK 50, and offers a spindle power of 25 kW with speeds up to 4000 rpm. If you are looking to get high-quality milling capabilities, consider the Auerbach FBE 3000 machine we have for sale. Contact us for more information.

This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details.

This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 18,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details.

This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine.

This 5-axis SACHMAN TS10 bed type milling machine is manufactured in 2026 and brand new. It features an impressive X-axis travel of 2,500 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 1,200 mm. The machine includes a robust table size of 2,700 x 800 mm and a maximum table load capacity of 3,000 kg. If you are looking to get high-quality milling capabilities, consider the SACHMAN TS10 machine we have for sale. Contact us for further details.

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up oper ...

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

CNC FIDIA CXR Axis Travel: X mm 2500 Y mm 1000 Z mm 1200 rapid feedrate mm/min 15.000 TABLE: Dimensions mm 2700x900 MAx load on the table 8000 kg n. 7 T slots 22 mm RAM square section mm 390x390 spindle motor power 20 Kw SPINDLE automatic birotative milling head 1 / 3 degree Spindle nose ISO 50 Max spindle speed 4500 rpm Max torque Nm 760 EQUIPPED WITH: n.2 chip conveyor Movable and rotating operator panel Cooling unit Auction-ID: A1-48745-14

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-9

x-travel:2000 mm y-travel:800 mm z-travel:800 mm table-size:2.000 x 700 mm workpiece weight:3500 kg drive capacity - spindle motor:17 kW spindle cone:50 ISO spindle turning speed range:3000 U/min dimensions of the machine ca.:5265 x 3250 x 2730 m weight of the machine ca.:9 t CNC controller:HEIDENHAIN TNC-426 :manuell used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs done in this machine, are the same than those done to all of our machines. - Completely repair of the head, replacing bearings, shafts and engaging gears. - Completely replacement of all the bearings of the machine. - Replacing the joining screws of the bodies. - Completely repair of spindles. - Adjustment and repair of axis. - Grinding and adjusting all guides, because of deterioration. - Grinding and adjusting of the guide ways of the ...

x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table

x-travel:1400 mm y-travel:400 mm z-travel:500 mm total power requirement:ca. 7,5 kW weight of the machine ca.:ca. 2,7 t dimensions of the machine ca.:ca. 2,60 × 2,30 × 2,20 m The KNUTH KB 1400 is a conventional bed-type milling machine designed for precise milling, drilling and threading operations on medium to large workpieces. The robust bed construction ensures high rigidity and machining accuracy, even for demanding machining tasks. Thanks to its robust construction, the machine is ideally suited for use in mechanical engineering, toolmaking, maintenance, and in single-part and small-batch production. Technical data ·X-axis travel: 1,400 mm ·Y-axis travel: 400 mm ·Z-axis travel: 500 mm ·Table size: 1,700 × 400 mm ·Table load capacity: approx. 800 kg ·Spindle chuck: SK 40 (DIN 69871) ·Spindle speed: 40?2,000 min?¹ ·Main drive: 7.5 kW ·Machine weight: approx. 2,700 kg  ...

x-travel:2500 mm y-travel:935 mm z-travel:1000 mm table surface area:I 1615 x 800 mm table surface area:II 800 x 800 mm spindle taper ISO:50 milling head speed:60 - 3000 U/min feed speeds:1 - 3000 mm/min rapid speed:10 m/min total power requirement:45 kW weight of the machine ca.:18,5 t dimensions of the machine ca.:5 x 5 x 4 m with CNC HEIDENHAIN TNC 426 Universa Milling Head -C-axis automatic Horiz-Vertical - Intermediate angles manual table II 800 x 800 mm as B-axis ( rotary table ) coolant attachment diverse accessories

x-travel:2000 mm y-travel:1500 mm z-travel:1460 mm milling spindle motor:35/30 kW spindle taper ISO:50 spindle turning speed range:24 - 3000 U/min table surface area:1350 x 1550 mm table load:6 t feed speeds:10 - 3000 mm/min rapid speed:10 m/min total power requirement:48 kW weight of the machine ca.:24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

Table size: 500 x 1200 mm traverse path x: 1000 mm stroke y: 550 mm traverse path z: 600 mm spindle retainer: ISO 40 spindle speeds: 60-2700 rpm spindle drive: 10 kW Electr. Supply: 380 V, 20 kVA kW space: 3200 x 2800 x 2650 mm weight: 7.3 t

oven 1150 inner chamber dimensions 1 x 1 x 2m t max 1150 Celsius PLC Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungsöfen Abwärmerückgewinnung Aluminiumgiessereimaschinen Anlassofen Brennöfen Dentalofen Durchlauföfen Emaillierofen Fusingöfen Generatives Fertigungsverfahren Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für sbguss Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Indust ...