bed type milling used for sale

12 galvanized conveyor belts, belt width 650 mm, capacity 150 to 200 t/h Lengths from 8 meters to 60 meters Left - clockwise rotation, with traction drive 037 KW Tel. 01715213204

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

Automatic Groove and Grip Hole Eyelet Machine Hang Type 115-20 incl. Conveyor Belt and Ceiling Magazine Built in 1988 OKU-Automatic eyelet sorter, Conveyor belt Length 2,500, width 500 mm, Folding unit HANG, Benefit Investors Machine is in good condition

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

PULVERBESCHICHTUNGSANLAGE, TRANSFER-TYP Aushärteofen - Gas, Diesel oder elektrische Quelle Pulverbeschichtungskabine - Zyklontyp oder mit Patronenfilter Pulverbeschichtungsanlage - manuelles oder automatisches System Hängefördersystem - Raupenfahrwerke und Rumpfform Wir bieten die besten technischen Lösungen und wettbewerbsfähige Preise Deutschsprachiger Ansprechpartner in Deutschland Kontaktieren Sie uns für weitere Informationen und Angebote VOGAMAKINA Ltd. abcs://vogamachine.com info@vogamakina

TRANSFER TYPE POWDER COATING LINE Curing oven - gas, diesel or electrical source Powder coating booth - cyclone type or cartridge filtered Powder coating equipment - manual or automatic system Overhead conveyor system - tracks trolleys and frull structure Contact us for quotation We provide the best technical solutions and competitive prices German speaking contact in Germany VOGAMAKINA Ltd.

800 x 600 470 mm 137 Piece(s)

800 x 600 445 mm 159 Piece(s)

1. ELECTRICAL BOX TYPE OVEN Purpose of use : Powder curing Maximum temperature : 220ºC The furnace heating system is designed as forced convection system. It is based on the principle of pumping the oven volume air into the oven with the help of a circulation fan and increasing the oven temperature with the heat transfer provided by the air passing through the heating unit. The walls of the furnace and heating unit are made of modular sheet metal and high density insulated panels. Air distribution ducts with regulated flaps inside the oven ensure that the oven temperature is homogenous at every point. The temperature control device is digital type and provides precise adjustment of the oven temperature. The heating unit is placed on the side, rear or top of the oven and consists of an insulated heating chamber, heating cell with resistance inside, circulation fan that can opera ...

Weld studs, ceramic rings, tip ignition studs, head studs -Welding studs: with ceramic rings, 40 different types Quantity/Version: see photo parts list -Delivery/Price: only complete set -Dimensions: 1200/800/H120 mm Total weight: 64 kg

Flange connection, V-flange -Weld neck flanges. 183 pieces -Type: DIN2633 / EN1092 26 different versions see photos parts list -Price/tax: complete -Weld neck flanges: please inquire about other sizes in stock -Transport dimensions: 1200/800/H540 mm -Weight: 533 kg

2-component gun, multi-function gun, cartridge gun, cartridge press, battery gun, battery-powered cartridge press -Manufacturer: Meritool, cordless gun PowerPush 5026 Type 2 -Cartridge: 600 ml -Accessories: incl. battery 20 V, see photos -Dimensions: 630/80/H290 mm -Weight: 2.3 kg

Sliding head lathe Star SR 38 Type A :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 31i model B Main spindle power: 11Kw Main spindle bar clearance: 38mm Headstock stroke (Z1): 320mm Main spindle speed: 7000 Number of linear axes: 7 Number of fixed tool holder plate positions: 14 Number of driven tool holder plate tool slots: 7 Rapid feeds for linear axes X Y Z: 36m/min High refrigerant pressure: yes External tank system with filter: yes Sub-spindle: yes Sub-spindle speed: 7000 Power against spindle: 5.5Kw Bar clearance: 38mm Number of motorized rear tools: 8 Coolant Used: Neat Oil Model and brand of bar loader: Iemca Boss 552-HD for 4 meter bars Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Length: 2740mm Width: 1315mm Height: 2120mm Weight: 4300Kg

General - Bertolaso Filling and Sealing Combine, YOC 2006 - Running direction left/right - Capacity range up to 8,000 bph 63-digit clamp overhead rinser - Ozone sterilization medium - Fully automatic sterilization before the start of filling - Centrally adjustable inlet stars, easy inlet screw replacement 40-Digit Vacuum Filler - with new gearbox - Centrally adjustable inlet screws - Easy inlet screw replacement - Fully automatic damping - Central height adjustment 6-digit natural cork seamer - with separate cork supply 6-head screw capper for BVS 30/60 and MCA 28 - Central cap supply - with central control station - Automatic faulty bottle ejection and collection station - With fully automatic star adjustment and easy screw change The filling and capping combine is immediately available and can be visited at any time after consultation. Used machines ...

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

Stainless steel grating mill

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Manufacturer: Demag, control unit control head -Type: DSM5 CSA Type 4 -Connector: Cable see photos -Transport dimensions: 390/200/H210 mm -Weight: 2.5 kg

Signal towers, signal lights, signal lamps, indicator lights, signal light columns, light signal alarm systems -Manufacturer: Werma, 3-stage signal tower -Type: Type 12 -Item No.: 640 810 00 -Voltage: 24 V -Number: 1x signal tower available -Dimensions: Ø 70 x 365 mm -Weight: 0.4 kg

Prisma 09C3 inline checkweigher for shipping/display cartons and similar articles, weight range up to 26.88kg.

For lawn tractors, ride-on mowers, lawn mowers, lawn tractors, mower decks, lawn mowers, cutter bars, disc mowers -Lawnmower blades: 48 pieces Types: different -Package: complete -Price: complete -Weight: 120 kg

plug socket -5x: 7000-08351-0000000 -5x: 7000-08321-0000000 -4x: 7000-08361-0000000 -5x: 7000-08341-0000000 -5x: 7000-08371-0000000 Price: complete -Weight: 2 kg

Combined surge arrester module Blitzductor, Profibus single module, for PLC control, lamp holder -3x: 919670 -3x: 919562 -6x: 919506 Price: complete -Weight: 0.5 kg

Grain conveyor belts capacity 150 t/h, belt width 650 mm, MZN 650, galvanized, also for hall filling 2 pieces 60 meters, stationary 1 drum motor each 2 pieces 60 meters revisable LEFT 7 RIGHT, 2 drum motors each, 2 displacement drives, IPE 200 mm rails, trailing cable 1 piece 30 meters, with drum motor 2 pieces 20 meters, with drum motor 1 piece 26.6 meters with regulating gear motor 15 KW, was receiving conveyor with many rollers 2 pcs 5 meter drum motor 2 pieces 7.5 meter drum motor Pictures are welcome to be sent. Dismantled, immediately available. Tel. 01715213204

Annular seal in link chain design, pipe sealing cushion -Various: Diameter -Can be used as a wall penetration, tank embedding and casing pipe sealing -Transport dimensions: 600/500/H350 mm -Weight: 35 kg

Milk pipe fittings, milk pipe nuts, stainless steel fittings -9x Size: DN 65 -9x Size: DN 80 -5x Size: DN 100 -Screw connection: 23 Price: complete -Weight: 12 kg

Terminal block, terminal block, feed-through terminal block -5x: 165 113 16 -8x: 111 035 05 -4x: 115 129 14 -4x: 165 130 23 -14x: 112 579 24 -4x: 115 124 07 -4x: 165 115 10 -1x: 116 298 27 -3x: 115 142 11 -1x: 115 120 17 Price: complete -Weight: 38 kg

Sensor module, G2 flat module, safety switching device -1x: HR-121126 -1x: VAA-4E-KF2-ZE -3x: KFA6-ER-16 Price: complete -Weight: 3 kg

Punching tools for window construction -various types: AM 06 93 -993333/993352-1/993335/993334/94-234907 -Sale: only complete set -Total weight: 50 kg

Lauber Wood dryer longitudinal ventilation, type 4 K-7, Chamber with stacking trolley Contents of the wood dryer: The wood dryer holds 1 parcel with a width of 1.40 m 1 parcel in height of 1.25 m 1 parcel in length of 6.40 m The wood dryer has a total gross volume of 11.2 m³. The wood dryer holds 7.2 m3 of wood net, based on a wood thickness of 50 mm, a stacking strip thickness of 20 mm and 90% width utilization with edged wood. External dimensions of the wood dryer excl. control cabinet: Width: approx. 1.60 m Height: approx. 1.90 m Length: approx. 7.50 m Heating capacity 24.0 kW More info on request

Key data: 1600 KG, 3600 mm, 9000 mm

We offer: Pallet racking, new 600 pitches Manufacturer: Maxrac Specifications: 32 stand frames, approx. 1,700 x 1,050 mm 240 supports, approx. 3,600 mm 480 locking pins Shelf load is 1,600 kg (with evenly distributed load). 19.992,00 € net plus 19 % VAT from stock 21698 Harsefeld. Subject to changes and errors. We are a professional provider – invoice with VAT indicated.

We are selling here a cooking system from the manufacturer Schröter, type HR1 Wg in a very good used and functional condition. Runs on 400 volts, 45 kW, built in 1999, completely stainless steel, Reich digital control, incl. 2 cars, workshop checked, immediately ready for use, dimensions W/D/H 140/130/265 cm, others on request.

Content: 1.000 Ltr. Working pressure: Max. steam pressure 1.1 bar at 50°C, 1.3 bar at 55°C Material: Stainless steel, 1.4404 inner tank, 1.4301 frame and outer jacket Design: cubic, upright, on 4 feet, with welded construction for access by forklift or pallet truck, Insulating jacket with perlite insulation, electrically heated up to 120 °C, 2,000 W, 230 V, Inner tank lined with ETFE coating Spout with disc valve DN 80 reduced to DN 50, cover DN 400, 1 x Safety Valve, 1 x Camlock Coupling 1", Total weight 381 kg Last Purpose: Food Height: approx. 1,670 mm Width/Length: approx. 1,200 mm/1,100 mm

Used Chain Conveyor Belt Manufacturer: BOA Type: 1500 HG 29°HTK 11770 Year of Make: 1997 Technical data of the chain belt conveyor belt: Drive power 3 kW Length of feed belt 650 mm Length of climbing strap 10770 mm Inclination: 29° Usable width 1400 mm Height of drive axle above ground 4,260 mm Height of sidewall riser strap, inside 800 mm

ID3425 MRS type 2-5 year/Baujahr 2019 6.4 t Motorized clamshell bucket with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, dredged approx. 200,000 cbm), inclusive identical bucket (built in 2008) as spare parts carrier (the predecessor of the new bucket) Motorized clamshell grab with electro-hydraulic drive, 4.3 cbm capacity, (was only in use for 1 year, excavated approx. 200,000 cbm), including identical grab (built in 2008) as spare parts carrier (the predecessor of the new grapple)

completely stainless steel Track width 800 mm 2 engines "JVM GmbH & Co.KG", type JV 156-250 Opening grille: dia. 14-22 mm Power: 2 x 0.95 kW Dimensions : ± 2,700 x 1,600 x 1,000 mm

Edelmann Computer Print V38 Web - Web Offset Printing Machine - - Type: RF. RB 8"81 / 3" . 12″ - Year of construction: 11/1989 - Number of printing units: 3 -Colour - Paper web width: 380 mm - Print width: 38 mm - Speed: 170 u/h - Movement: Alcolor - Current: V380 / A-30 / 15KW / Hz:50 - With accessories - Location of the machine: Germany Well maintained machine Machine is technically and visually in good condition

Screw Capper Dr. Datz with 4 capping heads, with electric height adjustment, Capacity: 8,000 bph, running direction: left-right, 28 mm closure

We sell our PPK baler. the main pump and auxiliary pump were replaced this year 2024. Invoices are available. The press only pressed cardboard boxes. It can be demonstrated and put into operation at any time.

turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inkjet Printer Videojet 1520/1560/1630 Different types Type 1520 Type 1560 Type 1630 Various consumables available (1 pallet) A total of 25 pieces Very good condition, straight from the production

Used cutter manufactured by Nowicki model KS B110 type 276 MM. New 2008. Zinastalled power 18.5 kW. Power supply 3x400V/50Hz. Max current 45A. Weight 500kg. Material - stainless steel.

SNACH PL01 Type 15213 Print Card

heavy 40s Gillardon with cross table

Working area X 4000 mm, Y 2000 mm, Z 115 mm Weight 16000 kg parameters L x W x H: approx: 9800 mm x 5300 mm x 2000 mm Siemens Sinumerik 840 D type of laser TruFlow 4000 W max thickness 20 mm 4000 mm x 1250 mm feed 3400 mm Dismantling, loading, crane is not in price of machine - plus price per all services NC: 88631 - Resonator/HD pump 1: 87603 - Beam on/pump 2: 53667

LANFRANCHI PET Bottles unscrambler capacity adjustable up to 27.000 bph Type L3 SR21 in top condition Was processing 0.50L and 1.25L PET bottles including : - full exit device to air conveyor system - electrical panel and drive Siemens S7 - already dismantled and packed Equipment in top condition Can be loaded & dispatched immediately

13900 kg net weight List available on request

Mitsubishi Heavy Industries Ltd Type - SC1F ( Single Cylinder Single Flow ), Condensing Steam Turbine Power : 205.440MW HP Steam : 85 ata, 538 C LP Steam : 5.5 ata 193 C Steam Turbine Generator Model : MB-H Power - 241, 680 KVA Voltage - 16.5KV, 50 Hz

Inv. Num. : 8195 Type: AR35 Type 11 Producer: Reform Created: 1998 Parameters: Control system: Sinumeric 805 Magnet: 3500 x 700 mm Machine height: 3000 mm Machine length: 8800 mm Machine width: 2250 mm Machine weight: 28000 kg

Rothenberger Robull Type L Hydraulic Pipe Bending Machine Larger, Sturdier Version Think it's type L. The number on the nameplate begins with L. The version that you can still buy at the moment is smaller and the bending glasses at the front are not so stable. Good used condition, full function, without the tripod foot. This is available to buy at Rothenberg, or simply build it yourself. Total weight 68 kg. Further dimensions can be found in the pictures. Shipping is done on several packages due to the weight