bed type mill used for sale

Equipped with: petrol engine, manual start, milling wheel approx. Ø 27 cm, milling wheel speed approx. 4,700 rpm, maximum milling height 25 cm above ground level, maximum milling depth 23 cm below ground level, direct belt drive, manual mobile, folding control lever, weight approx. 61 kg and dimensions approx. 142 × 58 × 114 cm (L×W×H), folded approx. 92 × 58 × 59 cm. NEW ENGINE NOT YET RUN Auction-ID: A1-47394-291

Hammer mill, ccm grain, equipped with 257Kw MAN water-cooled engine. Automatic addition for acid/bacteria Auction-ID: A1-47394-39

max. Displacement speed 65 m/min Max working speed 45 m/min. Controller HNC, 4 axes simultaneous Motor HNC motor Automatic tool change Swivel milling motor can mill an angle with oblique phase to the material. Aluminum vacuum table divisible into zones, lockable on the front by means of switches Auction-ID: A1-47366-95

Universal milling machine CME (Spain) Model FU-1E Longitudinal displacement : 1000 mm Transverse travel : 300 mm Displacement height : 500 mm Table dimensions : 1300 x 300 mm Machine dimensions W x D x H : 1900 x 1500 x 2200 mm Universal Huron type milling head with ISO 40 holder Includes various tool mounts and milling Auction-ID: A1-47366-73

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2240

Manufacturer: Brandt Kantentechnik GmbH Model: Optimat KDN 350 C Machine type: single-sided edge banding machine Year of Make: 2005 Engine No.: 0-261-06-3872 Electrical connection: 400 V / 50 Hz / 3~ Control voltage: 24 V Fuse: 16 A Edge thickness: 0.4–3 mm Workpiece thickness: 8–50 mm Workpiece width: min. 70 mm Workpiece length: min. 140 mm Feed rate: 11 m/min Edge magazine: automatic for roll material and fixed lengths Cross-cut unit: 2 motors, 0.18 kW / 12,000 rpm each Milling unit: top/bottom, 2 × 0.27 kW / 12,000 rpm Shape milling unit: top/bottom Scraper unit: for PVC edging Buffing unit: 2 motors, 0.09 kW each Control: electronic PC control Accessories: existing edge rollers and edge material to the right of the machine included Suction: separate small suction unit behind the machine included Auction-ID: A ...

Technical data Manufacturer: Haas Automation, Inc. Model No.: VF-3YT Serial Number: 1126820 Date of manufacture: 03/2015 Travels: X 1,016 mm / Y 660 mm / Z 635 mm Table: approx. 1,372 × 610 mm, 7 T-slots, 80 mm spacing Spindle holder: 40-taper Power supply: 3-phase, 50/60 Hz, 354-488 V AC Full load current: 40 A Maximum load current: 70 A Control: Haas CNC Control Version: Vertical CNC machining center, YT version with extended Y-travel Configuration Equipment: Tool changer with tool holders, T-slot table, work area with cooling/lubrication device. Remarks - 2026 Buffer battery replaced - Without clamped or surface-mounted tools! Offer refers to the machine only! Note Only operating instructions, but no technical documents available. Information researched to the best of our knowledge and belief. No guarantee is assumed for completeness and corre ...

Millipore Milliflex PLUS MXP PUMP 03; ; Model: MXP PLUS 03; With 3 microwire adapters; 3 Filtration Pumps (Milliflex Plus); 3 x 24 W; ; Internal reference: FA-1329; Auction-ID: A1-50994-1094

Year & Manufacturer: Bobcat. Working parameters: Hydraulic milling machine for planing pavements, with rotor equipped with milling teeth and visible hydraulic adjustment. Equipment included: Hydraulic hoses and integrated control cylinders. Notes: Heavily worn condition with significant corrosion visible on structure, components and hoses. Several milling teeth are visible. Auction-ID: A1-50671-10

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040; Catalogue number: ZAFS51040; Provides up to 800 L/day of clinical laboratory reagent water; Dispensing Flow <4 L/min; Operating weight of 222 kg (489.4 lb); Flow rate of 4 L/min; Make-up flow rate of 40 L/h; 800 L/day maximum. use; Resistivity: >15 MΩ-cm, at 25°C; H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches); Tank volume: 90 L, integrated; Total Oxidizable Carbon (TOC) Residues: <30 ppb (Produced Water); Comes with many accessories and filters:; 6 x Progard XL-S-C / PR0GTXLCS1 - Pre-treatment Pack; 2 x Q-GARD XL-4/QGARDTXL04 - Polishing Cartridge; 2 x Opticap XL Filter 4\" 0.22UM Q1 / 0PTIA04NN1 - Filter; 3 x Durapore Cartridge CVDI01TPS; Year of Manufacture: 2019; Resins and filters need to be changed.; Delivered without connectors;  ...

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2239

W-axis 630 mm Table dimensions (lxw) 1,250 x 1,400 mm Number of tables 1 Auction-ID: A1-50373-15

USED HERMLE FWH 630 MECHANICAL MILLING MACHINE Serial No.: 3221 Table dimensions: 650 x 180 mm Strokes: X=450 - Y=120 - Z=340 mm Spindle speed: 100 to 4480 rpm Equipped with 1 SA30 cone tilting head Manual and automatic longitudinal movement Dimensions and weight Pallet Europe 1200x1200xH1800mm - weight 600 kg Auction-ID: A1-50950-25

Auction-ID: A1-50373-16

Main spindle drive power 14 kW Table dimensions (lxw) 1000 x 560 mm Table load 800 kg Number of tool locations in the magazine 20 incl. handwheel Auction-ID: A1-50373-13

Table dimensions (lxw) 1800 x 1500 mm Table load 15000 kg Speed 2.3 - 810 rpm Spindle stroke max.800 mm Total power requirement 30 kW Table size 2,000 x 1,500 mm Face plate with NC face slide and NC rotary table Heidenhain Digital Display Various tool holders Various clamping devices Auction-ID: A1-50373-14

5-axis universal machining centre, Hermle Siemens CNC control (control panel with TFT screen) Round/swivel table integrated Tool magazine available Full protection cab Electronic handwheel Coolant Setup Machine Light CE marking Auction-ID: A1-51071-7

Round post cylindrical milled right angle cut 1 side crowned ø10 x 300 cm. The wood is smoothly planed. One side is shortened at right angles, the other side is crowned. Auction-ID: A1-45120-2241

x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Control: Dialog 11 total power requirement: 15 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3 x 4 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

boring mill, year 2000, CNC 0i - MD. Used machine. More info & price on IndustrialBuyer.

Reckermann FW 1300 S - Vertical milling machine - 3-axis - Heidenhain position display - Vertical head - Year of construction 1983 Technical data - X-travel: 1175 mm - Y-travel: 430 mm - Z-travel: 430 mm - Table size: 1500 x 400 mm - Milling carriage horizontally adjustable: 430 mm - Distance from spindle center to stand: 670 mm - Quill stroke vertical: 80 mm - Spindle taper: ISO 50 - Milling speed: 33 - 1800 rpm - Feeds longitudinal and transverse: 10 - 1000 mm/min - Feeds vertical: 4 - 400 mm/min - Rapid traverse longitudinal & transverse: 4.0 m/min - Rapid traverse vertical: 1.6 m/min - Feed motor: 3.2 kW - Coolant pump: 0.1 kW - Drive power: 14.8 W - Dimensions: approx. 3000 x 2200 x 2000 mm - Machine weight: approx. 4000 kg

- Engine power 0.94 KW-2690 rpm. - Maximum part capacity 150 x 75 mm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-605

- Motor power 0.75 KW. - Maximum rotational speed 3400 rpm. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-606

Machine Type: Milling Machine Manufacturer: Hermle Type: FW 801 Condition: used Offer will only be sent if a complete imprint is provided! Price 3.450 Euro incl. 19% VAT Location Warstein , Germany Reference number M-HER-1026 DESCRIPTION We offer you a used milling machine from the manufacturer Hermle. Incl. machine vise, Counter bearing for horizontal milling and mounted cutter head. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your complete contact details in order to receive an offer with our terms and conditions of payment. Errors in the descriptions and offers are reserved

CNC universal milling machine HERMLE U 630 T With track control Heidenhain TNC 426 Year of Make: 1998 Travel: X 630 (875) Y 500 Z 500 Speed range: 20 – 7,000 rpm infinitely variable With the following accessories: Rigid angle table 900 mm x 528 mm clamping surface Vertical tool changer with 16 magazine positions Full protection cabin with sliding doors and interior lighting Electronic handwheel 3 D Probe Heidenhain Coolant Setup 4 Height Adjustable M

New and used milling cutters and drills. Various manufacturers Approx. 300-350 pieces The table is not part of the auction. Auction-ID: A7-51143-1

Vintage: 2018 Appellation: Champagne Region: Champagne Quantity: 6 bottles Capacity: 75 cl Classification: Hommage William Deutz Meurtet Vintage 2018 - Brut - Champagne Deutz - Champagne Packaging: case of origin Auction-ID: A1-51167-20

GeneralTraveling column machine; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal2000 mmCross800 mmVertical850 mmTool changerType of magazineChain Number of tools40 Max. tool weight8 KgMax. tool length400 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmSwivelhead, B-axisControlled NC swivel milling head 15,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12 Drive power (100% DC) 16 kWDrive power (40% DC) 21 kWTorque (100% DC) 85 NmTorque (40% DC) 111 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder D ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63 Clamping System HSK-A 63 Toolchanger with set up station for tool loadingNumber of tools 30

Control Heidenhain TNC 124 Travel X/Y/Z: 500 x 400 x 400 mm Spindle speed 4,500 min-1 Tool holder SK 40 Manual rotary table with swivel axis 700 x 500 mm

FOOKE ENDURA 83.1 Portal milling machine The FOOKE ENDURA 83.1 is a 5-axis CNC portal milling machine with three linear axes X, Y, Z and two rotary axes A and C. The clamping surface consists of two machine tables of 3,200 mm x 1,000 mm each. An additional, brand-new spindle unit from the manufacturer SPL is included in the scope of delivery. Year of construction 2003 Control SIEMENS SINUMERIK 840D Travel X - 3,500 mm / Y - 2,500 mm / Z - 1,200 mm / A - ± 120° / C - 365° Rapid traverse X/Y/Z axis up to 20 m/min Rotation speed A/C axis up to 15 rpm Equipment: Spindle HSK 63A make SPL, type/DRF-FO-180M-W-16-34 with 34 kW up to 16,000 rpm. Tool changer for 20 tools / diameter up to 100 mm Internal cooling IKZ up to 30 bar Spindle cooling Paper belt filter system KNOLL Hinged belt chip conveyor KNOLL Automatic doors Full enclosure Electronic handwheel Machin ...

travel -x axis: 800 mm travel -y axis: 500 mm travel -z axis: 610 mm control: HEIDENHAIN - TNC 530 table load: 600 kg number of spindle speeds: 14.000 U/min numbers of positions in the tool changer: 46 tool taper: HSK-A63 Milling Machine - Vertical | FEHLMANN - PICOMAX 95 equipped with 46-way tool changer and chip conveyor. Equipment / Scope of Delivery: - touch probe: HEXAGON - tool measurement system: Blum - oil mist separator: Donaldson - high-pressure coolant system with coolant pump: Fehlmann - burn Engineering FD 2500-F11 cooling unit - Knoll 300 K-1 scraper belt conveyor The machine is in a well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PICOMAX95 | PICOMAX-95 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DATRON MLCube B CNC gantry milling machine – Year of construction 2019 - Professional high-speed CNC milling machine with ± 6,000 operating hours. - Working range X/Y/Z: 1,520 × 1,020 × 245 mm. - Water-cooled HF spindle 1.8 kW – 48,000 rpm, HSK-E25. - DATRON HSCpro control with DATRON next terminal. - Automatic tool changer with 12 positions. - Unique 4-fold synchronous driven rotational axis construction with pneumatic tailstocks. - Including industrial Ringler/Kärcher extraction system (5.5 kW) with custom-made pipe construction. - Includes vacuum clamping, 3D probe and minimum lubrication. - Complete, comprehensively equipped CNC installation, suitable for precision machining and series production. Auction-ID: A3-46142-20703

Table boring mill UNION BFT 110 CNC Yom: 1997 Spindle diameter: 110 mm Travel: X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg

Auction-ID: A3-46142-6014

KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces. Travel paths of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of large-volume components. The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled). Hirth gearing ensures precise angle settings. Powerful main spindle drive with approximately 30 kW. Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm. Additional equipment includes a 60-tool changer (KWE60), Chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per a ...

x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Control: HEIDENHAIN, TNC 114 B table surface area: 800 x 390 mm spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min spindle drive: 3 kW max. torque on the spindle: 5 Nm feeds X-axis: 4 - 1600 mm/min feeds Y-axis: 4 - 1600 mm/min feeds Z-axis: 4 - 1000 mm/min rapid traverse X/Y/Z axis: 1,6 / 1,6 / 1,0 m/min power feed x/y/z: 5000 N table load capacity: max. 250 kg total power requirement: 6 kW weight of the machine ca.: 1,6 t dimensions of machine L x W x H: 2,30 x 2,30 x 2,40 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills -Indexable insert end mills: Indexable insert end mills with internal cooling, 2 pieces -Hole: Ø 20 mm -Drill diameter: 20 mm -Submission/Price: complete -Transport dimensions: 20/40//H155 mm -Weight: 0.6 kg

Deckel FP4MA 2204 - CNC Tool Milling Machine - 2022 refurbished - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearings for long milling mandrels - Hydraulic tool clamping - Automatic manual transmission - Automatic clamping in the X, Y and Z axis - Automatic central lubrication - Coolant device - Direct displacement measurement - Anti-collision clutch in the Y and Z axes - Year of construction 1988 - Incl. tool holders, drilling/milling tools & tool trolleys Specifications Working Range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head can be moved manually on the headdle block: 150 mm Main Drive: - Pole-switchable three-phase brake motor: manual transmission with clockwise/cou ...

Manufacturer: AYCE Maquinaria S.A.L. – Spain Model: AC100-K4 Year of Manufacture: 1999 Serial Number: 744 Machine Type: CNC Horizontal Boring and Milling Machine Country of Origin: Spain 1. Technical Specifications Specification Value Spindle diameter 100 mm Spindle taper ISO 50 / MT5 (depending on configuration) Spindle speed range 12–1,200 rpm Number of spindle speeds 18 Horizontal spindle travel (W-axis) 700 mm Vertical headstock travel (Y-axis) 1,200 mm Longitudinal table travel (X-axis) 1,500 mm Cross travel (Z-axis) 1,700 mm Rotary table dimensions 1,100 × 1,200 mm Table rotation (B-axis) 360° Working feed rates 2–1,500 mm/min Rapid traverse (X/Y/Z) 3,000 mm/min Rapid traverse (spindle) 1,500 mm/min Electrical power 16 kW Electrical supply 380 V Frequency 50 Hz Approximate machine weight 12,700 kg Auction-ID: A1-51153-72

Bridgeport Interact 1 CNC Milling Machine Type: CNC milling machine Manufacturer: Bridgeport Model: Interact 1 X-axis travel: 457 mm Y-axis travel: 305 mm Z-axis travel: 365 mm T-slot table size: 410 x 1065 mm Speed range: up to 4000 rpm Machine weight: 1600 kg Dimensions (L x W x H): approx 1700 x 1300 x 2300 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-19

Plot has been tested for operation Auction-ID: A1-40164-245

Also from Pokolm, Depo, incl. inserts, weight Auction-ID: A7-51245-74

Cegonheira conventional centre lathe with chuck, toolpost, tailstock and screwcutting gearbox. Used industrial lathe; centre distance, spindle bore and operation to be confirmed. Auction-ID: A1-51153-7

Incl. inserts, weight 22kg Auction-ID: A7-51245-97

Partly new from Wirth / Hachenbach / Osborn, 3 degrees, 4 degrees, 10 degrees and other stock 12 to 20mm Auction-ID: A7-51245-54

From Voha/Garant, D=0,5... 1RO,5/2R1/3R1,5/4R2/5R2,5/6R3/8R4/10R5/12R6/16R8/20R10, partly long, weight 3kg Auction-ID: A7-51245-11

Auction-ID: A1-47368-1456

Deckel FP2LB Universal Milling Machine Type: Universal milling machine Manufacturer: Deckel Model: FP2LB Year of manufacture: 1977 X-axis travel: 800 mm Y-axis travel: 300 mm Z-axis travel: 400 mm Approx. dimensions (L x W x H): 1750 x 1700 x 1750 mm Includes various accessories and documentation Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-51153-21

DROOP & REIN FS 130 G – CNC Vertical Milling Machine Manufacturer: Droop & Rein (Germany) Model: FS 130 G Year: 1978 Machine Type: Heavy-Duty CNC Vertical Milling Machine CNC Control: Fagor Manufacturer Droop & Rein Model FS 130 G Year of Manufacture 1978 Machine Type CNC Vertical Milling Machine CNC Control Fagor Number of Controlled Axes 3 (X, Y, Z) Spindle Orientation Vertical Table Type T-Slotted Milling Table Spindle Head Vertical Milling Head Electrical Supply 380 V / 50 Hz Control Voltage 42–60 V Rated Current 120 A Order Number 04790 Country of Manufacture Germany Equipment and Features - Fagor CNC control panel - Fagor servo drive modules - Heavy-duty vertical milling head - Large T-slotted worktable - Automatic axis feed system - Centralised lubrication system - Electrical cabinet with technical documentation - Industrial steel and cast-iron construction Specification Refe ...