136,416 used machines on RESALE, but how to find them? Machine Search
used
GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSlide 1Longitudina ...
Unused stock machine from the demonstration room BJ 2021 - V 700 CNC machining center Siemens 828D Unused stock machine from the demonstration room BJ 2021 - MCV CNC Machining Center Siemens 828D Please see the photos for the details
The data of the machine can be found in the attached files. The machine is still energized and can be examined. The machine is available now.
used
General- partial hollow clamping device (hydraulic), - C-axis and spindle brake (hydr.) - upper compound slide with turning-/ milling spindle, with hydraulic locking reception HSK-A63, DIN 69893 - Y-axis ±210 mm - B-axis ±120º interpolating, Torque motor - tool magazine 36-fold disc magazine, ergonomic front load - absolute, direct measuring systems in X-, Y-, Z1-axis - cooling pump 6 bar;20 l/min, - USB-interface, Ethernet-interface; Control: CELOS X with Siemens 840D SL Operate Working areaSwing diameter over guide ways700 mmTurning diameter700 mmDistance between spindles3360 mmClamping chuck diameter max.630 mmBar diameter max.125 mmMain drive 1Drive power (100% DC)40 kWDrive power (40% DC)52 kWSpeed range- 2500 rpmTorque (100% DC)1700 NmMax. torque (40% DC)2200 NmC-Axis Speed2500 rpmTorque of C-Axis (holding torque)1700 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 698 ...
This 4-axis SPINNER TC800 110MCY was manufactured in 2016. It features a Siemens control system, operating at a voltage of 400 V and a frequency of 50/60 Hz. The machine has a full-load current of 63 A and a nominal current of 80 A. If you are looking to get high-quality turn-milling capabilities, consider the SPINNER TC800 110MCY machine we have for sale. Contact us for further details.
Heynumill 2700-PF from the manufacturer Heyligenstaedt. The machine is also energized and can be viewed at any time. Please refer to the photos for the data If you have any questions or need more information, please feel free to contact me.
Dear Ladies and Gentlemen, we sell our machine Deckel FP4 NC and associated div. milling cutter chucks. Please see the photos for details. The machine is energized and can be viewed at any time.
This 4-axis Hurco TMX8MYS was manufactured in 2014. It features a tool turret and includes a main spindle chuck, sub-spindle chuck, and parts catcher. With a robust design, this turn-mill centre is ideal for complex machining tasks. If you are looking to get high-quality turning and milling capabilities, consider the Hurco TMX8MYS turn-mill centre we have for sale. Contact us for further details.
x-travel: 1000 mm y-travel: 380 mm z-travel: 430 mm total power requirement: 5,5 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2 m No. 4471 Universal milling machine IBERIMEX U 1000 Working area: 1000 x 540 x 430 Drive: 5.5 kW Control: Visulesta 4 digital display Table clamping surface 1500 x 360 mm documentation Spindle holder ISO 50 Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 tons The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
milling machine, year 1997, CNC 426. Used machine. More info & price on IndustrialBuyer.
Offer 24309 Specifications: - Table size 710 x 315 mm - Working range of the axes - X (longitudinal) mech./ hand 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm - Distance between milling spindle and table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds regulated horizontally in 16 steps. 56 - 1800 rpm - Spindle speeds regulated vertically in 16 steps. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg
Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machining NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning ...
Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw
Mikron Universal Milling Machine Type 21D Heidenhain Control TNC 355 Tool holder ISO 40 21 spindle speeds from 40 - 4000 rpm Clamping table 350 x 700 mm Displacement distances: X=450 mm / Y=400 mm / Z=400 mm 400 V Control voltage 24 V Total weight approx. 2410 kg
Used and unchecked; viewing desired Auction-ID: A1-50737-88
YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to ...
Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible.
about 19500 meters Auction-ID: A1-50513-86
CNC Vertical Slot Milling Machine Year of Make: 1989 Workspace: x-axis 1300mm y-axis 150mm z-axis 200mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. groove length: 1200 mm Max. groove width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant Setup Dimensions: 1600 mm x 1500 mm x 1800mm (LxWxH) Hydraulic system Partially overhauled, milling spindle new. Commissioning within a radius of 200 km included in the price.
Car is in great condition and has all the documentation. Hardtop included Auction-ID: A3-46098-20752
For sale is a pulverizer that was previously used for fine grinding trials in the food sector. The machine is robust, reliable and powerful. Specifications: + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is ready for immediate use. Just plug it in and get started. It is still in mint condition and can be restored by arrangement can be visited. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.
YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...
Key data: 3100 mm, 2100 mm, 1000 mm
First commissioning: 2024 Control: OSAI Arbeitsbereich / Working Ranges X-axis: 3,100 mm Y-axis: 2,100 mm Z-axis: 1,000 mm Clamping table: 3,100 x 2,100 mm T-slot spacing: 250 mm Table load: 1,000 kg Milling unit: Spindle power:10 kW Spindle speed: Max. 24,000 min-1 Torque: 10.9 Nm Tool holder: HSK 63F Drives Linear Axes Feed speed X/Y axis: up to 40 m/min Z-axis feed speed: up to 25m/min Electrical connected loads: Voltage: 400 V Frequency: 50 Hz Fuse: 45 A Power requirement: 35 kVA Dimensions & Weights: Machine space requirements: approx. 4,800 x 5,000 x 4,300 mm Total weight: approx. 6.5 tons Colour: light grey Auxiliary: - 15-fold tool changer - Mobile control panel Machine Condition: New Availability: Immediate - subject to prior sale
Key data: 4000 mm, 2700 mm, 1250 mm
Year of manufacture: 2024 Steuer / Control: Heidenhain TCN640 inkl. HR520 Handrad - handwheel Arbeitsbereich / Working Ranges X-axis / X-axis: 4,000 mm Y-axis / Y-axis: 2,700 mm Z-axis / Z-axis. 1,250 mm Clamping table: aluminium table with T-slots at a distance of 250 mm Milling Unit / Milling Head Spindle power: 22 / 25 kW Spindle speed / rotation speed: Max. 24,000 min-1 Drehmoment / torque: 18 Nm Tool holder: HSK 63A Drives Linear Axes / Feed & Acceleration Feed speed X/Y-axis / max feedrate X/Y-axis. Up to 60/40 m/min Feed speed Z-axis / max feedrate Z-axis: Up to 35 m/min Electrical Connection Values / Electronic Consumption Spannung / voltage: 400 V Frequenz / frequency: 50 Hz Fuse / current power: 45 A Power requirement / power required: 25 kVA Dimensions & Weight & Dimensions: Required space: approx. 9,100 x 5,100 x 4,400 mm Total weight / ...
power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...
Fully functional Mikron Milling Machine Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.
HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw
Carousel milling machine 1 shaft for BERMAQ cats mod. C.T.C. - CE - used - Drilling unit - spindle moulder - matr. 02010 - year 2002
Key data: 13000 mm, 4500 mm, 1000 mm
CNC gantry milling machine (for aluminum skin drilling/milling operations) MTorres MGP-51350-TT Year of construction 2003 Siemens Sinumerik 840D CNC Control Travel: X 13,000 mm - Portal longitudinal path Y 4,500 mm - Crossbeam path of the milling support Z 1,000 mm – Milling ram vertical travel Positioning speed / rapid traverse speed 15,000 mm/min. 2-axis rotary/swivel milling head A & C A-bushes simultaneously Positioning speeds / rapid traverse speeds 10 rpm. Spindle drive power 20 kW Spindle speeds up to max. 30,000 rpm (electrospindle) 20-fold tool changer Tool diameter max. 80 mm Tool length max. 125 mm Tool weight max. 10 kg 16 units TorresTool pogo stick clamping system - NC controlled 5-axis gantry milling and drilling machine. Designed for high-speed milling and drilling of aircraft structural compone ...
x-travel: 700 mm y-travel: 800 mm z-travel: 800 mm control: Siemens 840D total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 5,2 x 3,8 x 3 m Brand Deckel Maho Machine no F630 Type DMC 70 H duo Block CNC Brand Siemens CNC Type Siemens 840D powerline Year of make 2006 Table length 500 mm Table width 500 mm Number of pallets 2 X 700 mm Y 800 mm Z 800 mm Spindle taper SK 40 Speed maximum 18.000 RPM Machine size 5.200 x 3.800 x 3.000 mm Machine weight 18.500 kg Tool magazine positions: 120 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm control: Siemens 840D total power requirement: 13/9 kW weight of the machine ca.: 4,7 t dimensions of the machine ca.: 3,4 x 2,5 x 2,2 m Brand DMG Mori Seiki Machine no F652 Type DMU 50 Ecoline Control Siemens 840D Year of make 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle taper SK40 Speed minimum 20 RPM Speed maximum 10.000 RPM Maximum table load 200 kg Chip transport Machine size 3.400 x 2.500 x 2.200 mm Machine weight 4.700 kg Tool magazine positions: 30 B-as: -5/+110 ° C-as: 360 ° Engine power: 13/9 Kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Good working condition Auction-ID: A1-47365-122
MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
Key data: 102 mm, 1530 mm, 900 mm
Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,530 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,500 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: Digital readout
FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in ...
Key data: 102 mm, 1600 mm, 900 mm
Spindle diameter Ø 102 mm Taper ISO 50 Horizontal spindle travel 710 mm Cross travel (X) 1,600 mm Vertical Travel headstock (Y) 900 mm Longitudinal travel (Z) 1,520 mm Table 1,250 x 1,400 mm R.P.M. 8 – 1,600 (18x) kW 11 Volts 380 Cycles 50 Including: 3-axis Digital readout with point to point control Heidenhain 310
x-travel: 720 mm y-travel: 360 mm z-travel: 420 mm total power requirement: 8 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,56 x 2,56 x 1,82 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 8-axis DOOSAN PUMA TT 1800 SY was manufactured in 2012. It features a maximum turning diameter of 230 mm and a maximum workpiece length of 700 mm. The machine is equipped with two spindles and two turrets, providing enhanced machining capabilities. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN PUMA TT 1800 SY turn-mill centre we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
100 € 
