bed type mill used for sale

Inlet: 1200 x 950 mm Rotor width: 1200 Rotor diameter: 800 Stator knives: 4 Rotor blades: 7 x 4

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Inlet: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor blades: 3 Stator knives: 2 Drive: 7.5 kW Double bevel cut With roller feeder, electrical control box and soundproofing box

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, reducing sleeve -Milling holders: adapter intermediate sleeve reducing sleeve SK40 MK5 -Mounting: SK40 -Holder tool: MK5 -Dimensions: Ø 63 x 405 mm -Weight: 5.6 kg

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 7 pieces -Intake: Ø 50/40/32/22 mm see photos -Transport dimensions: 390/220/H250 mm -Total weight: 27.2 kg

Refer to code 1060 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 -Intake: Ø 32 mm see photos -Dimensions: 250/90/H95 mm -Weight: 3.5 kg

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 50 mm -Recording: SK50 -Shaft: R=25,000 / L=120,068 mm -Dimensions total: Ø 98 x 255 mm -Weight: 4.4 kg

Ball Mill Vollrath EFC 200 Wet and dry grinding Ferrous grinding with steatite balls Lining hard porcelain Capacity 200 l Drive power 1.4 kW Speed 42 1/min 3 ball mills each mounted on steel structure Very good operational condition, directly from production!

PROMA FVV-135PD universal milling machine was built in 2018 in the Czech Republic. The highly reliable machine with a rigid construction is designed for precise machining of workpieces both vertically and horizontally, thanks to the vertical and horizontal spindle with an ISO 40 taper. The milling process is performed in the X,Y,Z axes on a fully illuminated working area with dimensions (L x W) of 1320 x 320 mm. The milling machine is additionally equipped with, among others, a SINO digital readout and cooling. The total weight of the machine is 2100 kg. Technical data of the PROMA FVV-135PD milling machine - work table size (L x W): 1320 x 320 mm - axis work feed: X,Y,Z - feed of table in X/Y axis: 1000/300 mm - rotation angle of rotary head: 360° - maximum vertical milling diameter: 25 mm - maximum horizontal milling diameter: 125 mm - maximum milling head diameter: 125 mm  ...

Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Tool holder, milling holder, milling tool, test mandrel -Test mandrel: Ø 39.99 mm -Mounting: SK40 -Shaft: R=19.995 / L=219.014 mm -Dimensions total: Ø 65 x 314 mm -Weight: 2.8 kg

Tool holder, milling holder, milling tool, long milling arbor, arbor holder, cutter head holder, cutter head holder -Milling holder: Type SK50 -Shaft: Ø 60 mm -Mounting: Square 24x24 mm / Shaft Ø 16 x 35 mm see photos -Dimensions: 365/96/86 mm -Weight: 6.5 kg

Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Dovetail: 190 to 165 mm -Bore: Ø 56 mm -Number: 2x counter bearings available -Price: per piece -Dimensions: 265/77/H122 mm -Weight: 6.1 kg/piece

Refer to code 1077 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 48 mm / height 150 mm -Dovetail: 140 to 115 mm 22 mm high -Dimensions: see technical drawing in the photos -Dimensions: 215/80/H210 mm -Weight: 6.8 kg

Counterholder, counter bearing, bearing block, pillow block, bearing for milling machine -Counter bearing: for milling machine -Bore: Ø 40 mm / height 108 mm -Dovetail: 79 to 59 mm 15 mm high -Dimensions: see technical drawing in the photos -Dimensions: 140/73/H155 mm -Weight: 3.6 kg

Refer to code 1079 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Tool holder, milling holder, milling tool, long milling arbor, mounting bracket -Milling chuck: SK50 chuck -Type: 50 x 50 x 630 mm -Shaft: Ø 27 mm / Sleeves Ø 40/85 mm see photos -Dimensions: Ø 100 x 835 mm -Weight: 23.5 kg

Refer to code 1085 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

Water slot milling machine, water slot milling machine -Three-spindle -electropneumatic circuit -pneumatic workpiece clamping -Fine adjustment via spindles and handwheels

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

horizontal slotting machine / high-speed planer Manafacture: Klopp Model: 550 Year of construction: 1982 Planer length: 550mm Weight: approx. 1250 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Horizontal milling machine Table length 65 cm x 400 mm y 120 mm Z 300 mm Length 1.20 m Width 1 m Height 1.60 m Vice

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Stock Number: 3786 PROCESSING Manufacturer: YCM, Type: FV56A Machine NO.: 401397, Year of manufacture: 2004 Specifications: Gr. table load 300 kg Longitudinal movement (X) 560 mm Transverse movement (Y) 410 mm Vertical movement (Z) 450 mm Gr. distance spindle/table 444 mm Spindle speeds 0-8000 rpm Tool changer 20 places Control Fanuc MXP 100I Fabr. Controlled in axes 3 Operating hours spindle 4042 hours Accessories: Pallet changer 2 - 560 x 420 mm Cooling by spindle Operating instructions Length: 2500 mm, Height: 2450 mm, Width: 1965 mm, Weight: 3000 kg

Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Horizontal milling machine Reckermann EW 900 Pony TNC 135 380 V 32 A 12,35 KW X 720 mm Y 370 mm Z 350 mm ISO 40 Weight 4 tons Vogel central lubrication Grooves 18 mm Speed range 40 - 2000 rpm Feed in all axes Data

Gear milling machine Micron 106 16 A 380 V

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece