bed type mill used for sale

REXON SB 25/16 G Column Drilling Machine Manufacturer REXON Model SB 25/16 G Year 1990 Condition untested Location 72589 Westerheim DE Lot 167

Drilling Ø: 35/40 mm Spindle holder: MK 3 Drilling stroke: 140 mm Projection: 293 mm Drive motor: 380 V, 1.5/1.9 kW Weight: 285 kg Space requirement: 900 x 550 x 1830 mm

Drilling Ø: 31.75 mm Spindle holder: MK 3 Speeds stepless. adjustable: 180 - 2100 rpm Projection: 280 mm Table size: 350 x 450 mm Large distance between table and quill: 700 mm Drive motor: 380 V, 0.9/1.3 kW Weight: 270 kg

For sale is a MAXION UNIMAX column drill, Made in Germany, in a heavy and robust industrial design. The machine is ideal for metalworking, locksmithing, mechanical engineering, maintenance as well as workshop and production operations. Technical data / equipment Manufacturer: MAXION Series: UNIMAX Production: Made in Germany Speed range: approx. 80–3,200 rpm Speed levels / ranges according to the machine shield: 80–720 rpm 160–1,460 rpm 180–1,600 rpm 360–3,200 rpm Pulleys: Ø 60 / Ø 140 mm according to the shift diagram Manual quill feed via large 3-arm hand lever Quick-release/drill chuck Solid height-adjustable work table Machine vise included Emergency stop switch Footswitch Solid machine stand with base plate CE marking The machine is in a used, age- and use-typical condition. Signs of wear and dirt are present and documented in the pictures.  ...

Industrial RFID Rotary Laser Engraving & Marking Machine. Very low number of hours of use: about 10 hours Built-in RFID programming and coding system 30W laser engraver EZCAD Software LMCV4-FIBER Laser Controller Panasonic Motor Controller MFP-30-NAEBA4.0 Laser Industrial rack computer included Purchase value in 2021: € 20,000 Sold without instructions for use. Auction-ID: A1-49938-4

Year 1998 2L 150hp Twin Spark petrol engine. Major mechanical restoration: Distribution, water pump, clutch, engine oil, gearbox oil, front rear pad and disc, rear front suspension, battery, ball joints and silent block also new. Homologated sports exhaust and original exhaust supplied with. Damaged and refurbished driver's seat. Slight scratch on the front left bumper. Otherwise in excellent working order. Will be sold with the original aluminum rims and not the one pictured. Auction-ID: A3-46164-35145

ROBERINE 1903 – PROFESSIONAL LAWN MOWER – 5 CUTTING UNITS – DIESEL – 5,942.8 H For sale: Roberine 1903 self-propelled professional lawn mower, specially designed for the quick and efficient maintenance of large grassy areas, parks, sports fields, estates and green spaces. This professional machine stands out for its 5 cylinder cutting units, consisting of 3 front units and 2 side units, allowing a large working width to be covered in a minimum of passes. The cutting elements have a lifting system that allows the machine to be easily adapted to the different work areas. The Roberine is equipped with a diesel engine developing 31 kW (about 42 hp) at 2,650 rpm. The meter shows 5,942.8 hours. The driver's station is installed in a fully enclosed cab, providing a good view of the cutting units and the working environment. It also has a passenger seat, mirrors, windscreen wiper, ...

2 x Bench Drill Flott

Bench drill Böhrer

Pallet with approx. 48 pieces of insulation spacers Fire resistance 120 min Auction-ID: A1-50251-473

Auction-ID: A7-50270-201

Eltra Control Transformer 14 used transformers are sold. Low-inrush control, safety and isolation transformer with tension spring connection terminals and combination base plate for screw and DIN rail mounting (TS-35 rail up to 250 VA) according to DIN 50022. kVA : 16000VA ED 100% U prime: 266V+-5% U sec: 230V - 400V Logistical data: Package: 1 piece Pallet dimensions : 1200mm x 800mm x 350 mm Dimensions of the device: 174mm x 180mm x181 mm Weight: approx. 20.5 kg per piece Pallet weight: 302 Auction-ID: A7-50493-13

Eicher Wotan 1 Type 3017S 6-Cylinder Fast Speed Tractor (1971) Specifications: Brand: Eicher Model: Wotan 1 Type: 3017S Year of construction: 1971 Engine: 6-cylinder in-line engine Transmission: ZF S high-speed gearbox Steering: Power steering Equipped with: ZF S high-speed gearbox Power steering PTO shaft (PTO) Hydraulic system Lifting device Original health session New leather seat upholstery Four new tyres Renewed lighting Renewed electrical installation New link New pressure group Special features: Original and rare example from 1971 Completely restored and technically overhauled a few years ago 6-cylinder in-line engine completely overhauled Equipped with the popular ZF S high-speed gearbox Gearbox shifts well according to specification Starts, drives, brakes and shifts properly The paintwork is in neat and well-kept condition Original health seat with ...

bore capacity in steel (diameter): 32 mm throat: 280 mm bore stroke: 145 mm taper MK: 3 MK table-size: 540 x 480 mm feeds: 0,08 bis 0,32 mm/U turning speeds: 180 - 2000 U/min total power requirement: 3,0 KW weight of the machine ca.: 0,9 t dimensions: 1,2 x 0,8 x 2,4 m Column drilling machine with: - Power feed - Thread-cutting attachment - Coolant pump - Machine light - Incl. machine vice - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column drill Ixion BS 30GL with reinforced motor. Year of construction: 1998. lead screw included. Also included are two drill masters, each with three threaded spindles, as well as an additional spare board.

Hand bending machine flat bar max. 16 mm square steel 16 mm round steel 16 mm Weight 45 Kg bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-50523-892

Dimensions of the containers 26 x 40 x 16 cm.Internal dimensions of the containers 23 x 35 x 15.5 cm.Thickness of the MDF top plate 10 mm.PP material (polypropylene) Storage spaces 12 boxes Condition: never used / new (5) Auction-ID: A7-50523-721

Articulated arm with Metabo grinder mounted on measuring table table 1500 x 1000 x 800mm Metabo straight grinder GE710 Plus speeds 10000 to 30500rpm articulated arm working range max. 1400mm see pictures Auction-ID: A7-50523-751

Mobile storage rack with 90 storage bins Dimensions of the red storage bins 9.5 x 16 x 9.5 cm.Dimensions of the blue storage bins 9.5 x 16 x 9.5 cm.Dimensions of the yellow storage bins 12 x 22 x 11.5 cm.Dimensions of the wheels 75 x 20 mm.Total dimensions 67 x 52 x 133 cm Condition: never used / new (5) Auction-ID: A7-50523-800

Machine vise with turntable. Jaw width 100 mm Clamping range 100 mm Clamping height 38 mm Weight 12 kg Dimensions L x W x H 260 x 140 x 120 mm Condition: never used / new (5) Auction-ID: A7-50523-865

Auction-ID: A1-50529-4

Universal tool trolley with 6 storage locations. Overall dimensions 99 x 40 x 87 cm. Container dimensions 26 x 40 x 16 cm.Internal dimensions container 23 x 35 x 15.5 cm.PP material (polypropylene) Equipped with four wheels, two castors with brakes. Condition: never used / new (5) Auction-ID: A7-50523-888

Dimensions of the containers 26 x 40 x 16 cm.Internal dimensions of the containers 23 x 35 x 15.5 cm.Thickness of the MDF top plate 10 mm.PP material (polypropylene) Storage spaces 12 boxes Condition: never used / new (5) Auction-ID: A7-50523-762

Shelf with 60 storage boxes. External dimensions of the boxes 100 x 295 x 105mm. Packaging dimensions 420 x 340 x 930mm. Weight approx. 30 kg. Storage spaces 60 boxes Weight 30 kg Dimensions L x D x H 780 x 320 x 1670mm Condition: never used / new (5) Auction-ID: A7-50523-729

HS DIALOG Digital control Control: Dialog touch 12\" incl. two sonotrodes (1:2 and 1:0.4) incl. additional control Dialog touch 12\" Instruction manual available Auction-ID: A1-50529-13

bore capacity in steel (diameter): 35 mm throat: 330 mm bore stroke: 180 mm table surface area: 765 x 620 mm 0: 130 - 1750 U/min feed: 0,1 - 0,2 - 0,3 mm/U tool taper: MK 4 total power requirement: 3,0 kW weight of the machine ca.: 0,7 t dimensions: 1,2 x 0,8 x 2,15 m Drilling machine with: Power feed 2 gear stages Tapping attachment Footswitch Machine light Coolant system Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weber slicer, type: MCS 902, number: 2625, year of construction: 07/2006, 400 V, 50 Hz, 10 kW, 6 bar, plastic wired outfeed belt, belt width: 400 mm, total dimensions: 3150 mm x 1700 mm x 2600 mm. Including Weber checkweigher, type: CCW, number: 2623, Wipotec weighing cells, type: WEB 99 T35S, plastic wire belt, belt width: 360 mm, total dimensions: 500 mm x 900 mm x 1100 mm and Weber rejecting belt, type: CCR 2623, year of construction: 2006, plastic wire belt, belt width: 360 mm, total dimensions: 500 mm x 900 mm x 1100 mm. Missing cover.

CFS grinder, type: UniGrind 250-L, machine number: 5000065420, year of construction: 04/07, 400 V, 3 Ph, 50 Hz, 105 A, 56 kW, plate diameter: 250 mm, total dimensions: 2750 mm x 1550 mm x 2250 mm. Including tool trolley, dimensions: 1350 mm x 770 mm x 750 mm. Switch cabinet, dimensions: 1000 mm x 800 mm x 370 mm.

Lippelt mobile bun machine/dough divider, type: Rustika mini, serial number: 906031/PB/0191, year of construction: 1999, 400 V, 3 Ph, 50 Hz, 1.1 kW, belt width infeed belt: 200 mm, belt width outfeed belt: 360 mm, total dimensions: 2250 mm x 750 mm x 1600 mm. With Lippelt mobile water bath, s/s mesh belt, belt width: 310 mm, total dimensions: 1450 mm x 720 mm x 1100 mm.

Carnitech double shaft vacuum paddle mixer, type: CT3027.01, number: 11-0037, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 41.5 A, volume: 2200 liter, machine weight: 3750 kg, dimensions: 3021 mm x 2187 mm x 3200 mm. Including s/s platform, 4 steps, working height: 1050 mm, total dimensions: 1680 mm x 920 mm x 2130 mm.

Carnitech frozen block grinder, type: CT 3126.02, number: 26864.00, year of construction: 2011, infeed clearance: 1100 mm x 1100 mm, plate diameter: 280 mm, total dimensions: 3600 mm x 1400 mm x 2540 mm. Including tool trolley, dimensions: 1310 mm x 600 mm x 1230 mm. S/s platform, 5 steps, working height: 1230 mm, dimensions platform: 1800 mm x 740 mm x 2300 mm. Sew-Eurodrive motor: 1200 mm x 850 mm x 630 mm. parts: 1200 mm x 800 mm x 800 mm.

MCR Machinery slicer, type: SNIJBAND, serial number: 210347-03, year of construction: 2021, plastic belt with dividers, belt width: 530 mm, divider height: 50 mm, distance between dividers: 100 mm, distance between knives: 70 mm, total dimensions: 2800 mm x 1000 mm x 1600 mm. The lot has already been professionally dismantled and stored.

Karl Schnell GmbH & Co.KG UHT system, type: 260, machine number: 14379, year of construction: 2011, 400 V, 3 Ph, 50 Hz, 38 A, 19 kW, capacity: 200 - 750 ltr/h, dimensions: 3450 mm x 1900 mm x 3000 mm. Including pallet with dismantled s/s pipes and valves. Function description UHT: The UHT system of KS is a direct and continuously working sterilisation system which has been designed for the shelf life extension of soft cheese, soft cheese preparation and similar products. The UHT system of KS consists of: - 2 Pipeline sections (which can be reconnected alternately for production and cleaning) - 2 Preheatings in the pipeline sections over which the cheese is heated up, different coupling panels with 2 direct steam injectors with steam valves - Bornemann product twin screw pump, type SLH - Fristam CIP centrifugal pump, type FPE 3532/175 - Dophin vacuum pump, type LH0060 - Flash tank - 2 CIP ...

Rheon encrusting machine, type: Double lane cornucopia, model: WN055, serial number: 172, year of construction: 10/2008, 380 V, 11.3 A, 4.3 kW, plastic belt width: (2x) 130 mm, clearance: 440 mm x 75 mm, total dimensions: 1800 mm x 1050 mm x 2240 mm. With Rheon dusting flour covering device, plastic belt, belt width:(2x) 100 mm, clearance: (2x) 70 mm x 40 mm, total dimensions: 1650 mm x 900 mm x 1750 mm. Incomplete, missing screw.

CFS Bakel B.V. mobile forming machine, type: MLF 400, machine number: 2206, year of construction: 2002, 400 V, 3 Ph, 50 Hz, 17.16 A, 7.77 kW, weight: 1186 kg, s/s mesh belt, belt width: 400 mm, dimensions dye: (6x) 180 mm x 20 mm, total dimensions: 2750 mm x 900 mm x 2150 mm. New controls installed in 2017.

Multivac traysealer, type: T300, serial number: 310724, year of construction: 2021, 400/230 V, 3 Ph, 50 Hz, 34.7 A, 8.8 kW, Busch vacuum pump, capacity: 100 m³ per hour, dimensions dyes: 247 mm x 314 mm, 230 mm x 145 mm, 175 mm x 228 mm and 256 mm x 175 (for skin packing), dimensions: 3200 mm x 1100 mm x 1700 mm. Transport rollies not included.

Karl Schnell ribbon mixer on weighing cells, type: 740, machine number: 13482, year of model: 2002 but date of delivery: 2011, 400 V, 3 Ph, 50 Hz, 60 A, 28 kW, volume: 1500 liter, total dimensions: 3020 mm x 2550 mm x 3060 mm. Including s/s control panel, dimensions control panel: 680 mm x 500 mm x 1500 mm and s/s working platform, working height: 1550 mm, total dimensions working platform: 3370 mm x 850 mm x 2670 mm.

double-table traveling column boring machine Software/CNC: Siemens Sinumerik 840D X: 18000 mm - Y: 5000 mm - Z: 1750 mm - W: 1400 mm - B: 360° - V: 3000 mm - U: 400 mm Table dimensions: 4000x3000 maximum workable height 5000mm

1 gebr. Column drill, Flott SB 23 Technical data (Flott SB 23) • Drilling capacity: approx. 23 mm to 25 mm in steel (continuous drilling capacity approx. 23 mm) • Max. drilling depth / stroke: 140 mm • Projection: approx. 300 mm • Spindle holder: MK 2 (Morse taper 2) • Speed range: Variable depending on the version (often approx. 100 to 2,000 rpm via gearbox/V-belt) • Column diameter: approx. 82 mm to 125 mm (depending on the construction generation) • Work table: approx. 415 x 385 mm (with T-slots, height adjustable by hand crank) • Motor power: approx. 0.9 kW to 1.4 kW (pole-switchable) • Electrical connection: 400 V / 50 Hz (three-phase current) • Machine weight: approx. 220 kg to 280 kg • Total height: approx. 1,950 mm

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

For Sale Used Corundum Disc Mill / Mustard Mill MK95