bed type mill used for sale

Worm Gear Cutter KLINGENBERG Type A 6519 C01S HF.9.432 Bore Ø 32 mm New !' Dimensions: 70 x 70 x 60 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1844 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 69 x 69 x 58 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS type G module 2 0175 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0191 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0510 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1432 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 69 x 69 x 58 mm

hobs, tooth gear hob for hobbing machine WMW / PWS type G module 2 0120 HSS / Co TGL 29-8002 bore Ø 32 mm New !' Dimensions: 78 x 78 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1646 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1042 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 0062 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Hob, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0233 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 79 x 79 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 0093 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0144 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Hob, tooth gear hob for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0630 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 78 x 78 x 71 mm

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 0140 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 1.5 1454 HSS / Co TGL 29-8002 Bore Ø 22 mm New !' Dimensions: 54 x 54 x 38 mm

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS) Type K Module 2 2109 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm

Key data: 50 mm, 800 1/min

Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition

Hobs, tooth gear hob for hobbing machine WMW / PWS Type K Module 2 2503 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 62 x 62 x 48 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2 605 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 63 x 63 x 48 mm

Hobs, sprocket hobs WMW / PWS ( WMW/PWS ) Type BP II ( BPII ) Chain pitch 9,25 rollers Ø 5 mm 9317 HSS / Co Bore Ø 27 mm New !' Dimensions: 70 x 70 x 57 mm

Hobs, tooth gear cutters for hobbing machine WMW / PWS ( WMW/PWS ) Type A Module 1.5 351 HSS / Co TGL 29-8002 Bore Ø 27 mm New ! Dimensions: 85 x 85 x 40 mm

Hobs, tooth gear cutters for hobbing machine JUGOALAT type M module 1.5 5591 HSS bore Ø 22 mm New ! Dimensions: 57 x 57 x 39 mm

Hobs, Gear Hobs for Hobbing Machine JUGOALAT Type M Module 1.5 5697 HSS Bore Ø 22 mm New ! Dimensions: 56 x 56 x 39 mm

Hobs, tooth gear cutters for hobbing machine JUGOALAT type M module 1.5 5719 HSS bore Ø 22 mm New ! Dimensions: 57 x 57 x 39 mm

Hobs, Sprocket Hobs JUGOALAT Type BB Chain pitch 31,75 rolls Ø 19.05 mm 1018 HSS DIN 8198 bore Ø 32 mm New !' Dimensions: 120 x 120 x 40 mm

Hob Cutter, Gear Mill for Hobbing Machine BUDPESTER CUTTING TOOL FACTORY, BFG Type A Module 1.5 802215 HSS Bore Ø 22 mm New ! Dimensions: 56 x 56 x 38 mm

Hobs, Gear Mills for Hobbing Machine BUDPESTER CUTTING TOOL FACTORY, BFG Type A Module 3,75 712160 HSS Bore Ø 32 mm New ! Dimensions: 90 x 90 x 72 mm

bore capacity in steel (diameter): 50 mm throat: 385 mm bore stroke: 240 mm table surface area: ø 500 mm spindle taper MT: 5 spindle turning speed range: 40 - 800 U/min feeds: 0,1/0,14/0,2/0,28/0,4 mm/U column diameter: 220 mm distance between table/spindle: max. 670 mm distance spindle/base plate: 1180 mm total power requirement: 4 kW weight of the machine ca.: 1,4 t dimensions of machine L x W x H: 1,5 x 0,75 x 2,4 m Accessories: drill chuck, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 70 mm throat: 420 mm bore stroke: 260 mm thread capacity: 50 M spindle taper MT: 5 MK column diameter: 220 mm bore spindle turning speed range: 51-966 U/min table-size: 600x600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 132-1852 U/min table-size: 420x400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

Key data: 45 mm, 1350 , 298 U/min

Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

bore capacity in steel (diameter): 23 mm throat: 310 mm bore stroke: 150 mm turning speeds: 90 - 2000 U/min : 420 x 360 mm total power requirement: kW / Volt weight of the machine ca.: 650 Kg dimensions: 1,2 x 0,8 x 2,4 mm Bench drill - Left/right rotation - Advance - Base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity steel/GG: approx. 25 mm Spindle mount: 2 MK Projection: 300 mm Table size: 305 x 380 mm Quill stroke: 115 mm Spindle speeds: 200 - 1200 rpm Drive motor: 380 V, 1/1.5 kW Space requirement: 800 x 400 x 1800 mm Weight: approx. 280 kg

Specifications: Drill Diameter: 1.5 - 3 Drill chuck holder: B16 Spindle stroke: 50 mm Projection: 150 mm Column diameter: 46 mm Motor power: 350 W Connection: 230 V Dimensions (WxDxH), approx.: 220 x 450 x 590 mm Weight, approx.: 55 kg Equipment: - Machined foot with T-slots - Sprocket chuck

bore capacity in steel (diameter): 40 mm throat: mm bore stroke: mm total power requirement: 4 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Lg.Nr. 25072 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable rpm - Projection 350 mm - Max. distance from drilling spindle to table 580 mm - Table with 2 T-slots 600 x 450 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 1950 x D 950 mm - Weight approx. 650 kg -with: - Machine vise - Keyless chuck 1-13 mm -Lighting

bore capacity in steel (diameter): 50 mm throat: 350 mm bore stroke: 180 mm thread capacity: 35 M spindle taper MT: 4 MK column diameter: 150 mm bore spindle turning speed range: 132-1852 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 35 mm throat: 300 mm bore stroke: 150 mm thread capacity: 27 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 100-2000 U/min table-size: 420x400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 160 mm thread capacity: 30 M spindle taper MT: 4 MK column diameter: 125 mm bore spindle turning speed range: 75-2100 U/min table-size: 480x480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

Specifications: - Drilling capacity in wood 40 mm - Drilling capacity in steel 18 mm - Drilling spindle holder MK 2 - Quill stroke 120 mm - Drilling spindle speeds infinitely variable in steps - 60 - 2840 rpm - Max. distance table – drilling spindle 600 mm - Boom / unit tiltable left + right 45° each - Boom / unit swivel left + right - Table size 450 x 450 mm - Drive 400 V / 0.33 / 0.55 kW - Space requirement approx. W 500 x H 1870 x D 1200 mm - Weight approx. 150 kg

Key data: 13 mm

Made in Germany Drill chuck: B 16 Speed: 480 - 4,000 rpm