bed type mill used for sale

Rational combi steamer, type: 61 G, number: G61SH15032450014, 6 floors, dimensions floors: (6x) 540 mm x 330 mm, total dimensions: 850 mm x 850 mm x 800 mm.

Climaventa condensor, type: NX/K/S 0262P, number: 32097890, year of construction: 2018, 400 V, 3 Ph, 50 Hz, 60 A, 32 kW, weight: 860 kg, refrigerant: R410A 19.7 kg, dimensions: 1300 mm x 2550 mm x 1950 mm.

F.A.C. Srl automatic slicer, type: F 350 I AUTOMATIC M8S, number: 24000280, year of construction: 2024, 230 V, 50 Hz, 0.370 kW, dimensions: 700 mm x 550 mm x 700 mm.

Hegro fryer, 3 pans, type: Tornado HR44, fatory number: 0624052017 / 0524052017 / 0424052017, year of construction: 2017, 230 V, 50 Hz, 21 kW, gas heated, dimensions: 2400 mm x 900 mm x 1550 mm.

Hegro fryer, 3 pans, type: Tornado NG3, fatory number: 0324052017 / 0224052017 / 0124052017, year of construction: 2017, 230 V, 50 Hz, 25 kW, gas heated, dimensions: 2400 mm x 900 mm x 1550 mm.

Multivac thermoformer, type: R515, serial number: 16767, year of construction: 2012, dimensions: 8000 mm x 1100 mm x 2100 mm. Including pallet with parts, without vacuum pump.

Kenwei 14-head multihead weigher, type: JW-A14, identify code: A14-1-17, 220V, 50/60 Hz, 10 A, 1200W, weight: 470 kg, hopper volume: 1.6/2.5L, dimensions: 1300 mm x 1200 mm x 1900 mm. Including s/s infeed frame and pallet box with parts.

Gram Commercial A/S refrigerator, type: ECO PLUS K 70 RAG L2, serial number: 10225228, year of construction: 2016, dimensions floors: 600 mm x 550 mm, dimensions: 870 mm x 700 mm x 2120 mm.

Frey mobile piston filler, type: KOMPAKTA2, machine number: K230C10434895, year of construction: 2015, 400 V, 50 Hz, 3.7 kW, dimensions: 1000 mm x 800 mm x 1230 mm.

Frey Maschinenbau piston filler, type: KOMPAKTA2, serial number: K230C11735976, year of construction: 2016, 400 V, 50 Hz, 3.70 kW, capacity: 30 liter, dimensions: 800 mm x 650 mm x 1300 mm.

Netzsch progressing cavity pump, type: NM033B0, serial number: 462024, year of construction: 2014, capacity: 0.80/2.10/4 m³/h, dimensions: 2050 mm x 350 mm x 350 mm.

Nesto frozen block cutter, type: CUT MAX, serial number: 2069, year of construction: 2026, 400 V, 3 Ph, 50 Hz, 5 kW, weight: 530 kg, working width: 470 mm, total dimensions: 2100 mm x 800 mm x 1800 mm. Never used.

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Hood Dishwasher Hobart UXTLH-A-SEF / UXTLH-10A Year: 2018 - Dishwasher, hood type dishwasher - Manufacturer: Hobart - Model: UXTLH-A-SEF - 400V 50Hz 3/N - 21.6 kW - Year of construction 2018

bore capacity in steel (diameter): 13 mm throat: 235 mm bore stroke: 60 mm spindle taper: B 16 spindle turning speed - stepless: 100-3000 U/min table surface area: 290x270 mm column diameter: Ø 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): Ø 25 mm throat: 209 mm bore stroke: 95 mm turning speeds: 12 Stufen spindle taper: MK 3 table surface area: 308x308 mm distance spindle /table: 770 mm spindle turning speed range: 200-2440 U/min total power requirement: 0,75 kW weight of the machine ca.: 105 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-phase choke, throttle EAW Type V (3 pcs) TGL 200-8402 2 x 0.4 mH 16 A 500 V used ! Dimensions: 295 x 180 x 95 mm

Instrument transformer FEUTRON Type 1373 Mains connection: 220 V AC 7 VA Output: 0 - 10 V Switching capacity: 250 V 50 W max. 3 A New !' Dimensions: 185 x 100 x 125 mm

Directional Control Valve, Pneumatic Valve FESTO Type: 9983 Vl/O-3-1/2 Series: H802 Pe: 1 - 10 bar Dimensions: 140 x 120 x 50 mm

Auction-ID: A3-46113-11023

This 6-axis Hanwha SL32HP swiss type turning machine was manufactured in 2003. It features a maximum turning diameter of 32 mm and a spindle speed range of 200–8,000 rpm. The machine includes a robust tooling system with multiple tool positions and is equipped with a counter spindle for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the Hanwha SL32HP machine we have for sale. Contact us for further details.

This 5-axis Hanwha XE35H was manufactured in 2022. It features a maximum turned diameter of 35 mm and impressive axis travels, including 312 mm in X (2) and 340 mm in Y. The machine is equipped with a maximum main spindle speed of 6500 rpm and a tool capacity of 21. If you are looking to get high-quality turning capabilities, consider the Hanwha XE35H swiss type turning machine we have for sale. Contact us for further details.

Hydraulic cylinder HUNGER Type 116801 Piston Ø 200 mm Rods Ø 140 mm Working pressure 300 bar Test pressure 400 bar Max. stroke 180 mm Dimensions 600 x 300 mm

Directional Control Valve, Pneumatic Valve FESTO Type: VSVA-B-P53C-H-A2-1C1 Series: D602 24 V New ! Dimensions: 110 x 75 x 20 mm

Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible.

Tool Settler, Universal - Measuring Stand, Measuring Stand SOMET TYPE 685062 Projection: 35 - 135 mm Measuring height: 40 - 460 mm Measuring table: Ø 140 mm Accessories - see ME742 ! used, tested ! Dimensions: 700 x 400 x 1000 mm

Guide cylinder FESTO Type: DFM-12-50-P-A-KF 10 bar Dimensions: 110 x 60 x 30 mm

Viscous measuring device, viscometer, rotational viscometer MLW PRÜFGERÄTEWERK MEDINGEN type RN 211 220 V AC 50 Hz in wooden case, lock defective ! used, tested ! good condition ! Dimensions: 220 x 440 x 450 mm

Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3GS-QS-8 Series: S402 196906 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm

Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3ES-QS-8 Series: S402 196902 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm

Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3GS-1/8 Series: U402 196938 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm

Maintenance unit with pneumatic switch WMW, EAW Type: 3 1026/19 switch st H2 NW 6 0 - 1 MPa New ! Dimensions: 380 x 240 x 150 mm

Directional Control Valve, Pneumatic Valve FESTO Type: MBEH-5/2-D-1-ZSR-FR-C Series: RN02 184494 3 - 10 bar 24 V with connection plate ! Dimensions: 125 x 115 x 100 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/12 0 - 400 kPa New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/18 0 - 1 MPa New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/17 0 - 140 (400) kPa New ! Dimensions: 320 x 150 x 135 mm

This 9-axis TSUGAMI HS327 swiss type turning machine was manufactured in 2017. It features a maximum machining diameter of 32 mm and includes a main spindle with 8 positions for turning tools. The machine has been completely overhauled in 2022, ensuring optimal performance. If you are looking to get high-quality turning capabilities, consider the TSUGAMI HS327 machine we have for sale. Contact us for further details.

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1003/01 0 - 4 kp/cm² New ! Dimensions: 330 x 125 x 80 mm

Filter pressure reducer, maintenance unit EAW REGLERWERK DRESDEN Type: 3.1026/13 0 - 1 MPa New ! Dimensions: 345 x 125 x 80 mm

6 new bobbins included - need to be replaced due to stationary Auction-ID: A3-46097-16598

Pneumatic cylinder BÜRKERT TYPE 0047 0047-AX01-040-450-AL-B-00 stroke: 450 mm Rod diameter: Ø 16 mm used, tested ! Dimensions: 660 x 55 x 55 mm

Directional Control Valve REXROTH MECMAN TYPE 5-X13-2 04938 335 02 New ! Dimensions: 85 x 80 x 40 mm

This 7-axis DOOSAN Puma ST32G was manufactured in 2012. It features a maximum machining diameter of 32 mm and includes a main spindle with a Z1/C1 axis. The machine is equipped with 6 turning tools and 4 driven cross-machining tools, providing versatile capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma ST32G swiss type turning machine we have for sale. Contact us for further details.

Pneumatic cylinder, double-acting, with swivel fastening JOUCOMATIC series 450 type PES2 45070759 p: max. 10 bar stroke: 250 mm piston diameter Ø 100 mm rod diameter: Ø 25 mm rod thread: M20 x 1,02 5, Length: 40 mm 2x swivel pins: Ø 25 mm, Length: 25 mm Swivel pin spacing: 130 mm pneumatic connections: 1/2 ( inches ) New, with underlays ! Dimensions: 485 x 185 x 125 mm

Directional Control Valve REXROTH MECMAN TYPE 6-X13-2 04938 335 02 New ! Dimensions: 85 x 80 x 40 mm

Directional Control Valve, 5/2-Way Valve REXROTH, MECMAN TYPE 5-X13-2 04938 335 02 New, with underlays ! Dimensions ( Directional Control Valve ): 78 x 39 x 75 mm Dimensions ( Package ): 125 x 110 x 45 mm

Submersible pump POMPES POLLARD type 3,100 W immersion depth: 150 mm foot: Ø 85 mm flange: Ø 122 mm 200 l/h 220 / 380 V Dimensions 190 x 122 x 122 mm

SIME INDUSTRIE brake type 650 RM N° 27231 50 V Dimensions: 200 x 200 x 300 mm

1:1 Pressure Converter, Pressure Converter VDO MESS- UND REGELTECNIK GmbH Type: 21 / 16 Best: No. 055834 Supply air pressure: 1.4 - 4.4 bar to Measured value: 4 mbar - 4.0 bar with accessories New ! Dimensions: 78 x 78 x 45 mm

Laser measuring head EGM GMBH Type 220/70 Item no.: XL000.346.41.00 Measuring range: 185 - 255 mm Dimensions: 210 x 130 x 55 mm