bed type mill used for sale

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.

A CNC slant bed lathe Focus is offered. Swing diameter over bed: 600mm, max. turning diameter: 330mm, max. turning length: 669mm, spindle bore: 88mm, spindle speed: 3400rpm, travel X/Z: 260mm/762mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, tool stations: 12, tool holder: VDI40, quill diameter: 85mm, tailstock taper: MK4, controls: Siemens. Weight: approx. 5700kg, machine dimensions: X/Y/Z: approx. 3600mm/1800mm/1800mm. Inspection possible by appointment.

turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The machine has been completely overhauled. Capto C6 milling chuck Double prism lathe chuck The machine has many optional accessories that can be purchased separately. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms  ...

HARDINGE CONQUEST T42SP ist eine CNC-Drehmaschine mit Schrägbett, für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenweite 350 mm, DrehØ über Bett 269 mm, drehbar 231 mm, Spindelbohrung 42 mm; Wege Z 353 mm, X 135 mm; Revolver 12 Pos. Drehz. 50–5000 t/min; Motor 7,5 kW. Zubehör: 3-Backenfutter Ø150, hydraul. Reitstock, Messarm Renishaw. Ermöglicht enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

SOMAB TRANSMAB 200 ist eine CNC Drehmaschine mit Schrägbett für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Ø über Bett 260 mm, Spindelbohrung 35 mm, Z 300 mm, X 125 mm, Revolver 8 Pos., Schaft 16 mm, Reitstockhub 80 mm (Ø52). Technik: A2-4", Innenkegel 20 mm, 200–5000 U/min (stufenlos), 4 kW Motor, 3x400 V, Gewicht ~2500 kg, 1900×1400×1980 mm. Zubehör: Spannzangensatz, Lampe, Reitstock, Werkzeugschr., RS232, Fußpedal. Für enge Toleranzen in Automotive, Luftfahrt, MedTech. Technische Daten ohne Gewähr

SOMAB TRANSMAB 200 is a CNC Drehmaschine mit Schrägbett, für präzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehdurchmesser 260 mm, Spindelbohrung 35 mm; Wege Z 300 mm, X 125 mm; DUPLOMATIC Revolver 8 Pos., Werkzeugschaft Ø16 mm. Daten: 200–5000 min-¹ stufenlos, Spindelmotor 4 kW, Aufnahme A2 4", Innenkonus 20 mm; Reitstock Morse 3, Hub 80 mm, Ø52 mm; 3×400 V 50 Hz; Gewicht ~2500 kg; L1900×B1400×H1980 mm. Zubehör: Spannzangen F38, Beleuchtung, Reitstock, Werkzeugschrank, RS232, Fußpedal, Werkzeughalter. Für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr

SOMAB TRANSMAB 200 ist eine CNC Drehmaschine mit Schrägbett, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Drehdurchmesser über dem Bett 260 mm, Spindelbohrung 35 mm; Verfahrwege Z 300 mm, X 125 mm. Revolverschlitten DUPLOMATIC, 8 Positionen, 8 feste Werkzeuge, Werkzeugschaft 16 mm, Innenkegeldurchmesser 20 mm. Spindeldrehzahlen stufenlos 200–5000 U/min, Spindelmotor 4 kW, Spindelaufnahme A2 4", Reitstock Morse 3 mit Pinolenhub 80 mm und Durchmesser 52 mm, Druck 1200 N; Anschluss 3x400 V 50 Hz; Gewicht ca. 2500 kg; Abmessungen L1900×B1400×H1980 mm. Ausstattung: Spannzangenaufnahme F38, Satz Spannzangen, Beleuchtung, Werkzeugschrank, RS232-Schnittstelle, Fußpedal, Satz Werkzeughalter. Ermöglicht Bearbeitungen mit engen Toleranzen; typische Branchen: Automobil, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrmacherei. Technische Daten ohne Gewähr

Technical details Manufacturer: PFAFF Model: 3834-3/11 Type: Automatic pocket welting sewing machine Configuration: - Programmable electronic control panel - Numeric keypad and display interface - Automated sewing cycle functions - Automatic positioning system - Pocket and welt sewing station - Thread trimming functions - Industrial production worktable - Heavy-duty drive system Application: - Jacket pocket production - Trouser pocket manufacturing - Welt pocket sewing - Fashion garment production - Uniform manufacturing - Automated garment assembly operations Construction: - Industrial sewing workstation - Electronic process control system - Dedicated pocket-setting configuration Dimensions: - Length: Approx. 1200 mm - Width: Approx. 750 mm - Height: Approx. 1300 mm Weight: Approx. 180 kg Condition: Used Observed condition: - Machine head complete - Orig ...

consisting of 39 pieces , partly shrunk, partly normal incl. tool carrier system Reference: Alesco - Lot 46 Auction-ID: A7-49882-24

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-47444-49

Bed table with steel frame and high-density panel. Base with 4 removable castors Ø 50 mm (2.5\") including 2 with brake. Height (from 72 to 110 cm) adjustable and angle. Top: 41 x 61 cm. Delivered as a kit. Packaging: 65 x 7 x 67 cm Multilingual instructions: GB, FR, IT, ES, PT, DE, RO, SI. Auction-ID: A1-50069-248

Reference: 1136111 Auction-ID: A1-50069-39

Content consisting of disc cutters, saw blades, milling cutters, countersinks Reference: Wahl - Lot 58 Auction-ID: A7-49882-302

Contents consisting of a cutter head . Twist drills, various keys, parallel supports, taps, twist drills, clamping devices Attention: without the clamping system shown in the photos Reference: Option - Lot 63 Auction-ID: A7-49882-304

Content consisting of various milling cutters, radius milling cutters and clamping devices Reference: Option - Lot 61 Auction-ID: A7-49882-303

• Made of plastic • White • Washable 94°C Auction-ID: A1-50069-31

Content consisting of various milling cutters, inserts in different sizes, reamers, twist drills Attention: all items stored on the workbench are not included in the scope of delivery! Reference: Choice - Lot 68 Auction-ID: A7-49882-305

MOL 3-axle tipper semi-trailer, put into service on 03/06/2003. Features: Brand: MOL Type: Dump Semi-Trailer Configuration: 3 axles GVW: 39,000 kg Tare: 6,000 kg Payload: 33,000 kg Overall length: 10,040 mm Wheelbase: 6,330 mm Rear overhang: 2,460 mm Kingpin / rear distance: 8,875 mm Kingpin load: 15,000 kg Air suspension. Air braking with WABCO brake corrector. Tipper with side panels (longitudinal or lateral tilting). Auction-ID: A3-46162-35841

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Auction-ID: A7-49599-8

Auction-ID: A7-49599-53

Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Pitch: ~ 650 mm Cutting width: ~ 170 mm Cutting height: ~ 40 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Tester for the detection of particles in infusion bottles; two polarizing filters and magnifying glass; for brown bottles with cold light. Cold light source with Included in delivery, light guide missing. Dimensions 600×400×380 mm; Weight 24 kg; Field of view Ø 250 mm; Magnifying glass Ø 300 mm; 230/115 V, 50–60 Hz; 3 fluorescent lamps; 2 m cable. Auction-ID: A7-49816-163

Testing device for the detection of particles in infusion bottles; two polarizing filters and magnifying glass; for brown bottles with cold light. Cold light source with Included in delivery, light guide missing. Field of view 250 mm; 3 fluorescent lamps; 230 V, 50 Hz, 0.5 A; Power consumption 24 W; 2 m cable, switch, Schuko plug. Auction-ID: A7-49816-162

HSE HUGO SACHS Simulator C Type 224 (15064) + TAM-A Type 705-1 (15545) The Stimulator C is a compact and highly stable square pulse stimulator with precise digital time control. Its large LCD display (2 lines of 40 characters) and reduced controls simplify installation and use. Ideal for pacing with isolated cardiac systems. Auction-ID: A1-49883-236

HSE HUGO SACHS Simulator C Type 224 (16076) + TAM-A Type 705-1 (16556) The Stimulator C is a compact and highly stable square pulse stimulator with precise digital time control. Its large LCD display (2 lines of 40 characters) and reduced controls simplify installation and use. Ideal for pacing with isolated cardiac systems. Auction-ID: A1-49883-161

Table clamping surface: 500 x 1600 mm table movement x: 1220 mm table movement y: 500 mm table movement z: 500 mm spindle retainer: SK 50 spindle speeds: 56-2800 rpm feeds longitudinal & cross: 10-1800 mm / min feed vertically: 2.5-450 mm / min. Supply: 400 V, 16 kVA kW space: 2000 x 2250 x 2150 mm weight: 4500 kg

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

Key data: 850 mm, 270 mm, 355 mm

Table width 315 mm, table length 1250 mm Tool holder SK 50 Speed range 28 - 1400 rpm Feed range 16 - 800 mm/min Travel x=850 mm, y= 270 mm, z=355 mm Connected load 8 kW Incl. Electric clamp horizontal Vertical head in X swivel with manual tightening Dispensing as present, no longer energized

Code 4923 DESCRIPTION Universal milling machine Make DEBER Model FU 1 Serial No. 228 Year Table 1250 x 300 mm Longitude table 750 mm Vertical table 405 mm Cross table 240 mm Spindle taper 40 ISO Speeds 40 - 2000 rpm Feeds X-Y-Z 14 - 700 mm/min Rapides 1 and 2 m/min Spindle motor 5,5 kW - 380 Volts Weight of machine 2000 kgs Accessories universal millinghead ( 2 x turnable ) Coolant Condition Machine is in very good condition

bore capacity in steel (diameter): 110 mm x-travel: 2.100 mm y-travel: 1.500 mm z-travel: 1.000 mm w-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVA Working Spindle: - boring quill diameter: 110 mm spindle taper: DIN 69871 ISO 50 spindle power: 22 kW transmission ratio: 2 turning speed range: 2.000 U/min clamping table: - max. workpiece weight: 4.000 kg surface area: 1.100 x 1.300 mm feeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/min feed range W-axis: 0 - 10.000 mm/min rapid motion - x-axis: 10.000 mm/min rapid feed Y, Z, W-axis: 10.000 mm/min Control: total power requirement: 22 kW weight of the machine ca.: 23.000 kg dimensions of the machine ca.: 7,1 x 6,5 x 3,7 m Equipment. • CNC-control HEIDENHAIN 430 • support bearing • manual milling head • coolant tank with pump The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

Key data: 4700 mm, 6100 mm, 1470 mm

Portal milling machine with fixed portal and 2 separately movable machine tables for pendulum machining. The tables can be coupled to form a large table. Designed for the typical applications in model and mould making and in the machining of (small) series parts with high efficiency. In addition, the machine can be equipped with a zero-point clamping system for quick replacement of clamping fixtures or prepared parts. Areas of work: X-axis: 4,700 mm Y-axis: 6,100 mm Z-axis: 1,470 mm A-axis: ± 115° C-axis: ± 360° Control: OSAI Openkey 2-axis milling head with spindle: Spindle power: 15 kW Spindle speed: max. 24,000 min-1 Torque: 20.9 Nm Tool holder: HSK 63F Tool tensioning: pneumatic blowing air / MQQ: outside Clamping table: Clamping surface: 2 x 1,950 x 2,500 x 213 mm (coupled: 4,000 x 2,500 mm) Aluminium with grid threaded holes Max load: 1000 kg distributed over th ...

For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...

Key data: 1120 mm, 345 mm, 550 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 rpm Feed range 16-800 mm/min Travel x 1120 mm ; y 345 mm; z 550 mm Connected load approx. 14.5 kW Accessories: 2 counter bearings Electric clamp horizontal and vertical spindle Vertical milling head SK50 with snap bearing

Key data: 1400 mm, 630 mm, 500 mm

Table size 1800 x 630 mm Speed range 56 - 2800 1/min Tool holder ISO 50 Travel X / Y / Z 1400 / 630 / 500 mm Feed range X, Y 10 - 2000 (Z 2.5 - 500 ) mm/min infinitely variable Main motor 15 kW, connected load approx. 20 kW Incl. Universal milling head IUG 32A swivel 360° horizontal milling spindle Rapid traverse, automatic cycle Digital display Heidenhain ND 750 Coolant Setup Work area cladding hydraulic tool clamping CE Declaration of Conformity

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsTable surface900 x 560 mmMaximum load (table centre)600 KgDrive power (100% DC)9 kWSpeed max.12000 rpmDrive power (40% DC)13 kWDimensions (L x W x H)3,03 x 3,49 x 2,94 (5,8 x 5,5 x2,94) mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z600/560/510 mmSpindle taperSK 40 DIN 69871 Max. torque82 NmTool Magazine with30 PositionsTorque (100% DC)54 NmWeight approx.5200 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange between the IoTconnector and CELOS APPs such as the NETservice. The integrated firewall with automatic updates ensures the hSafety Package for Power FailureSafety Package for Power ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Cross520 mmLongitudinal650 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct t ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS with Heidenhain TNC 640 Technical DataRapid traverse longitudinal/transverse/vertical42/42/42 m/minFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minWorking area 1Cross700 mmLongitudinal1450 mmVertical550 mmIntegrated motor spindle speedMASTER®Integrated motor spindle speedMASTER® At speeds > 18.000 min-1, the use of tools with dual contact system (BIG-PLUS®) is stipulated.Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTableTable surface 1760 x 750 mmClamping System DIN ISO 7388-3-ADSpindle taper SK40 Tool holder DIN ISO 7388-1-ASpeed range - 20000 rpmTorque (40% DC) 130 NmSlot width 14 mmMaximum load (table centre) 1500 KgNumber of Slots 7Distance between T-Slots 100 mmCabin roofCabin roof In sheet steel design Open and close via front doorSpecial equipmentClamping pneuma ...

GeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with40 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgSpindle speed 20 - 12,000 rpm SK50, 288NmSpindle speed 20 - 12.000 rpm SK50 for tool taper according to DIN ISO 7388-1-A50 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% DC) (differently from standard)Tool magazine 40 pocketsTool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rateInternal coolant su ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper,  ...

CharacteristicsTable surface1460 x 750 mmMaximum load (table centre)1500 KgTool Magazine with30 PositionsMovement X / Y / Z1150/700/550 mmRapid feed X / Y / Z42/42/42 m/minWeight approx.12900 KgGeneralVertical-Machining centre Stealth Design; Control: CELOS X with Siemens 840D SL Operate Spindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possibleTool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper, incl. manually direct loading into the tool magazineCoolant-air blast change-overCoolant - Air-blast changeover external switchable via M-FunctionAir blast through spindle centreAir blast through spindle centre activated by M function, maintained air with low oil rat ...

GeneralVertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control CharacteristicsMaximum load (table centre)800 KgDimensions (L x W x H)3,3 x 2,7 x 2,94 mRapid feed X / Y / Z30/30/30 m/minMovement X / Y / Z800/560/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with30 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmTable surface1100 x 560 mmWeight approx.5550 KgDirect measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SysteminlineMASTER® spindle 12.000 rpminlineMASTER® spindle 12.000 rpm Spindle speed range 20 to 12.000 rpm Tool Taper SK40 DIN69871 with BIG PLUS inteface Tool clamping according to DIN69872 Power: 13kW (40% DC) / 9kW (100% DC) Torque: 83 Nm (40% DC) / 57 Nm (100% DC) bearings oil-air lubrSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872NC-D ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air wi ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline X Multi-Touch control CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minSpindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Func ...

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 40 barProduction Package 40 bar Option includes: - Internal coolant supply 40 bar; - Tank capacity: 600l with papertype filter; - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal -Tool clamping buttons on the headstockTool Clamping and Unclamping Buttons placed on the Headstock CoverAir coolant internal (through spindle centre)Air Coola ...