135,188 used machines on RESALE, but how to find them? Machine Search
bore capacity in steel (diameter): 35 mm x-travel: 450 mm y-travel: 250 mm z-travel: 500 mm digital: ja Dimensions (L/W/H): 1,2 / 1,1 / 1,95. mm thread dia.: 24 mm weight of the machine ca.: 800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a single-spindle copy milling machine from Elumatec, type AS 70/44, built in 2007. The machine was overhauled in the workshop (almost overhauled). As part of the overhaul, the following new spare parts were installed: - both bearings on the spindle, - both bearings on the engine, - Straps, - all linear bearings (10 pieces), - Gas pressure spring, - Both clamping cylinders including rubber buffers - Copy lever, - Öler (Festo), - Pressure reducers (Festo), - Foot valve with protective tube, - Clamping lever (5 pieces), - Copy scales, - CEE plug, - all hoses and plugs. In addition, the large horizontal and two vertical shafts were re-chromed. Most of the galvanized parts were re-galvanized. All information without guarantee. The price quoted is a VB net price. The machine is sold on account with VAT. Payment can be made in cash on site ...
x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
For sale is a copy milling machine from the renowned Italian manufacturer FOM, built in 2006. The machine was overhauled at the factory. As part of the overhaul, the machine was completely dismantled and all parts were cleaned individually. The support plate was ground and galvanized. Many other parts were also re-galvanized. Some parts were repainted. The bearings on the engine were replaced, as were the bearings on the milling spindle. In addition, a new belt and a new gas strut were installed. Technical features according to the manufacturer: - Spindle with double speed - Quick-lock spindle to facilitate tool change - Horizontal clamping devices - Copy template - Diving stops - Pneumatically operated copy pen with Ø 5 and Ø 10 mm diameter - Spray mist lubrication according to the Venturi principle All information without guarantee. The machine can be shipped t ...
DECKEL MAHO DMC 63 V CNC vertical machining center was built in 2003 in Germany by DECKEL MAHO Geretsried GmbH. The machine has been regularly serviced and maintained throughout its entire service life. As part of the service work carried out, the CNC controller power supply, the coolant pump in the cooling system and the Y-axis cover scrapers were replaced. The gripper clamping force was adjusted and a new spindle covered by a one-year warranty was installed. The DECKEL MAHO DMC 63 V is designed for precision milling, drilling and threading of metal workpieces. Machining is performed by a spindle cooperating with an automatic, 24-position tool magazine. The spindle, driven by a high-power motor, reaches a maximum speed of 10000 rpm. The tool measuring probe, together with the readout system supports correct tool setting, ensuring high precision of the operations performed. All proces ...
• Table with 7 T-slots and an attached ALLMATIC machine vice, jaw width: 160 mm • Incl. 3-axis digital readout manufactured by HEIDENHAIN
With six slots and an attached vise, jaw width: 100 mm.
Attention: without the machine vises seen in the photos! • incl. three axis digital read out • incl. universal milling head
• Table with 7 slots • Incl. 3-axis digital readout manufactured by HEIDENHAIN
Offer 26215 Technical data: - Drilling capacity 28 mm - Drilling spindle holder MK 3 - Tightening thread M 12 - Drilling spindle speeds - level 1 120 / 215 / 360 / 600 / 1080 rpm - Level 2 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit height-adjustable by hand crank - Smallest / largest distance table / boring spindle 60 / 390 mm - Drilling spindle stroke 100 mm - Spindle fine stroke adjustment by handwheel - Drilling spindle projection 260 mm - Coordinate table with 3 T-slots 600 x 240 mm - Table travel X-axis 350 mm - Y-axis 160 mm - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 800 x H 1800 x D 900 mm - Weight approx. 300 kg
for sale is a MAHO600E which is currently not running because the emergency committee reports an error (ERR 0 23,M 02).
Key data: 880 mm, 630 mm, 630 mm
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 T With track control Heidenhain iTNC 530 Year of Make: 2002 Travel: X 880 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Rotary Table 0 700 mm integrated into Rigid Angle Table 1250 mm x 700 mm Clamping surface Vertical tool changer with 32 magazine positions (SK 40) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Spiral Screw Conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
8 pieces diameter 16 mm; 4 pieces diameter 20 mm; 2 pieces diameter 32 mm; unused and in original packaging Auction-ID: A1-49785-198
Includes 100 matching inserts LNGQ1206 Auction-ID: A1-49785-172
Includes 7 different magnetic clamping blocks Auction-ID: A1-49785-33
Including face milling, drilling, collet, tapping bush holders; approx. 45 pieces Auction-ID: A1-49785-43
Reference: 744-05; own weight approximately 100 kg Auction-ID: A1-49785-260
Diameter: 60 mm; various sizes; approx. 130 pieces; lying in 2 drawers Auction-ID: A1-49785-272
Various recordings with ABS40/ ABS50 coupling; in 2 cardboard boxes Auction-ID: A1-49785-209
Including face mill, ER collet holders; Includes various boring tools/ 42 pieces in total Auction-ID: A1-49785-45
Various sizes; unused and in original packaging Auction-ID: A1-49785-303
7 pieces diameter 50 mm with reference A21150R08-11; 8 pieces diameter 63 mm with reference A21163R10-11; unused and in original packaging Auction-ID: A1-49785-164
Including diameter 22 and 32 mm; various lengths; unused and in original packaging Auction-ID: A1-49785-94
Including T-slot / diameters 63 x 3 mm, 63 x 5 mm, 100 x 4 mm; Including matching inserts and miscellaneous; in 2 cardboard boxes Auction-ID: A1-49785-230
Various diameters including 2 pieces diameter 32 mm, 1 piece diameter 175 mm, 2 pieces diameter 315 mm; unused and in original packaging; Including pallet box Auction-ID: A1-49785-77
4 pieces with diameter 25 mm and length 165 mm; 7 pieces with diameter 25 M12; 9 pieces diameter 32 M16; Series 490; unused and in original packaging Auction-ID: A1-49785-132
Various diameters; unused and in original packaging; 8 pieces in total Auction-ID: A1-49785-50
2 pieces diameter 63 mm; 2 pieces diameter 100 mm; 1 piece diameter 125 mm; 1 piece diameter 160 mm Auction-ID: A1-49785-136
Equipped with lower and upper clamping Auction-ID: A1-49785-49
Minimaster; with cylindrical absorption; including matching inserts; with accompanying Lista inlay trays; Horizontal and including pallet box Auction-ID: A1-49785-90
x-travel: 3500 mm y-travel: 2500 mm z-travel: 1000 mm Control: HEIDENHAIN iTNC-530 table-size: 4.500 x 1.500 mm distance between columns: 2300 mm rapid travel x/y/z: 15/12.000 mm/min feeds: 5.000 mm/min tool taper: ISO 50 number of spindle speeds: 5000 U/min/rpm Spindle power: 30 kW table weight: 10 t handwheel: HR- 410 weight of the machine ca.: 31 t dimensions of the machine ca.: 11 x 3,44 x 4,9 m - CNC control Heidenhain iTNC 530 - Tool changer 30-fold (ISO 50) - Milling head CH -45 - Coolant through spindle - Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition; it can be tested by prior arrangement.
CONTROLS conventional BASIC DESIGN basic design: cross bed WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 1120 mm Y-axis travel: 350 mm Z-axis travel: 400 mm distance spindle nose - table surface (max.): 420 mm TABLE table surface (left-right): 1600 mm table surface (front-back): 400 mm workpiece load (max): 1500 kg SPINDLE / HEAD spindle type: tilting head - mode of operation: manual - mode of operation: manual spindle revolutions (max): 28 /min number of gears: 1400 tool fixture: ISO SK 40 AXIS DRIVES feed velocity (min): 16 mm/min feed velocity (max): 800 mm/min ELECTRICAL SPECIFICATIONS total power consumption: 14.5 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 2350 mm total height: 2150 mm total wei ...
CONTROLS Point-to-point control (NC) HEIDENHAIN TNC 124 WORKING RANGE -CUBIC- X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm TABLE table surface (left-right): 800 mm table surface (front-back): 425 mm workpiece load (max): 250 kg SPINDLE / HEAD spindle revolutions (max): 4500 /min tool fixture: ISO SK 40 drive power: 7.5 kW ELECTRICAL SPECIFICATIONS mains power supply: 13 kVA DIMENSIONS / WEIGHTS space requirements -left/right-: 2720 mm space requirements -front/back-: 1850 mm total height: 2300 mm total weight approx.: 2025 kg ca 2000 h
x-travel: 400 mm y-travel: 400 mm z-travel: 400 mm table surface area: 700 x 460 mm spindle taper: SK 40 spindle turning speed range: 31,5 -5000 U/min spindle drive: 5,5 kW quill stroke: 80 mm vertical head swivelling: +/- 90 ° control: DIALOG 11 feeds x/y/z -stepless: 3000 mm/min rapid traverse: 6 m/min total power requirement: 13,8 kVA weight of the machine ca.: 2 t dimensions of machine L x W x H: 2,73 x 2,0 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quil retraction, dividing unit HOFFMANN, RW/NC 125 L, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6 Monate ab Auftragse : Taiwan : 41800 € : 798.38 € : 65 - 2600 U/min : ISO 40 : 420 x 220 x 380 mm : 840 x 390 mm : 2.2 kW : 1600 mm : 1700 mm : 2000 mm : 1145 kg : 840 x 390 mm : 1000 mm/min : 5 : 14 x 63 mm : 200 kg : 420 mm : 220 mm : 380 mm : 0 - 600 mm/min. : 0 - 600 mm/min. : 65 - 2600 : 90 - 310 mm : 65 - 2600 : +/- 90° ° : 100 mm : manuell : 2,2 kW : 950 x 250 mm : 90 - 310 mm : 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for h ...
x-travel: 600 mm y-travel: 400 mm z-travel: 320 mm table-size: 900 x 420 mm control: konventionell tool adaptor: SK40 turning speed range: 35,5 - 1800 U/min quill stroke: ja mm total power requirement: 5,0 kW weight of the machine ca.: 1,45 t dimensions: 1,6 x 1,2 x 1,9 m Features: - Digital display - Coolant system - Milling head with quill The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Various tools including batch of inserts, tap holders, 1x insert drill ø 55 mm; 1x Akko AKSR 90-120 cutter head. Auction-ID: A1-49889-28
including: interchangeable inserts, core drills, countersink Auction-ID: A1-49889-294
Universal Milling Machine Operating hours 2672 according to meter Universal milling head can be swivelled 360° Mounting SK 30 Table eyelet 900 × 300 mm with three T-slots Including machine vise Machine in very good condition immediately ready for use Auction-ID: A1-50529-6
Lot of roller end mills, 7 pieces, different sizes, see pictures. Auction-ID: A1-50529-220
x-travel: 760 mm y-travel: 381 mm z-travel: 450 mm quill stroke: 152 mm table-size: 1300 x 305 mm control: Heidenhain TNC 360 tool adaptor: SK40 turning speed range: 100- 4.000 U/min rapid speed: 5000 / 7000 m/min feed speeds: 2,5 bis 3000 mm/min power requirement: 2.2 kW diameter of quill: 101 mm total power requirement: 15,0 kW weight of the machine ca.: 2,4 t dimensions: 2,4 x 2,3 x 2,2 m Equipment: - Heidenhain TNC 360 - Coolant system - Hydraulic tool clamping - Milling head with quill - Machine light - Chip tray - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
