bed milling used for sale

Horizontal milling machine Steinel SH1 Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

2x double spindle milling machine Walther Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Horizontal milling machine Steinel Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Hermle horizontal milling machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Deckel Maho 4-axis CNC milling machine DMC 64 V linear Working Range: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - With 520 Heidenhain control - With coolant system + paper filter - Probe preparation, but probe is missing - Few operating hours - Machine is first owned - from the production of individual parts of precision parts - All 4 axes can be moved, only the transmitter of the main spindle is defective Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or ...

max. wheel diameter: 180 mm gear width: ca. 220 mm max. module: 3 / 5 mm Control: Siemens 840D sl max. radial velocity: 5000 mm/min max. workpiece diameter: 180 mm table rotation speed: 800 U/min table diameter: 145 mm axial travel: 250 mm mm back rest:: axial travel: 300 mm clamping force max.: 13 kN milling head:: swivelable +/-: 45 ° drive capacity: 23 kW turning speeds: 6000 U/min diameter of tools max.: 90 mm tool clamping length max.: 211 mm module hobbing max.: 3 module profile milling max.: 5 tangential speed max.: 7500 mm/min weight of the machine ca.: 9,5 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Equipment / Accessories: - The machine is equipped for dry milling. - workpiece magazine - parallel gripper: - workpiece weight form-fit max. 15 kg - workpiece length max. 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table 600 x 300 mm Travel distances X / Y / Z: 400 / 300 / 350 mm Spindle holder SK 40 Spindle speeds: 50 - 2500 rpm Drive power 2.2 kW Accessories: Vise, dividing head, rotatable vertical milling head, Weight 1,500 kg Machine dimensions: L 1485 x W 1475 x H 1680 mm Instruction manual in German

X-axis: 1000/1245mm, Y-axis: 630mm, Z-axis: 550mm, angle table: 1200x630mm, quill stroke: 75mm, tool holder: SK40, drive power: 7.5kW, spindle speed (continuously variable): 20-7,000/min, feeds: 1-20,000mm/min, rapid traverse: 20,000mm/min, connected load: 14kW, rated current: 24A, control: HEIDENHAIN TNC 426 with hand-held control unit, total connected load: 17kVA, weight: 6t, operating hours, machine on: 122,355h, control on: 18,579h, program run: 36,747h, with Knoll 400 K-1 scraper belt conveyor. Equipment: manually swivelling vertical milling head, protective enclosure with viewing window, coolant system, chip conveyor, HEIDENHAIN 3D touch probe TS 642. An on-site inspection is possible.

x-travel: 10000 mm y-travel: 1500 mm z-travel: 3000 mm Control: Heidenhain TNC 430 tool taper: ISO BT 50 spindle turning speed - stepless: 10 - 3000 U/min feed range: 10000 mm/min rapid traverse: 15 m/min main drive motor: 37 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC-control HEIDENHAIN TNC 430 40-station ATC NC-Universal Milling head, automatic positioning (A/B axis 0.001 / 0.001 deg) Chip conveyor Optional (price upon request): CNC rotary table Juaristi 3000 x 3000 mm - Table load 30 to - Longitudinal movement 2000mm - Separate CNC-control FAGOR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-spindle copy milling machine with stops for aluminium and plastic profiles Maximum spindle speed: 12,000 rpm Stop arms right and left Good condition

Vision Wide VF4000 portal milling machine for sale. 2-axis milling head (1 degree C-axis and 1 degree B-axis) with position determination Encoder SK50 VTEC VF4000 Dimensions X-axis 4200 Y-axis 2300 Z-Axis 1020 Tool magazine 40WZ Control Siemens 840D SL

Chain milling machine on its own stand with various accessory components (b. Chains and Swords)

A Deckel Maho 5-axis CNC milling machine in need of repair is offered. Travel X/Y/Z: 1080mm/710mm/710mm, NC-mounted rotary table C-axis X/Y: 800mm/620mm, swiveling milling head B-axis: 90°, max. spindle speed: 12000rpm, tool taper: SK40, tool positions: 32, control: Heidenhain iTNC 530, control-on hours: 75100h, program run hours: 24720h. Equipped with internal air blast supply, external coolant supply, Heidenhain infrared touch probe, Heidenhain electronic handwheel, Rotoclear rotating inspection window, chip conveyor, oil mist extraction system, coolant system with paper band filter, chip flushing gun, work area light and clamping support next to the mounted rotary table for longer workpieces. The milling head clamping system is leaking, but the machine is still operational. An on-site inspection is possible.

CMZ TD-30-TM-800 CNC Turning-Milling Center Technical Specifications Manufacturer: CMZ Model: TD-30-TM-800 Year of Manufacture: 2021 Control System: FANUC 32i-TB Plus Maximum Turning Length: 800 mm Maximum Turning Diameter: 550 mm Spindle Power: 42 kW Bar Capacity: 82 mm Tool Turret: 16 positions Machine Weight: 8,700 kg Equipment: Driven Tools, C-axis, Chip Conveyor

3-sided machining in one clamping Speed: 12,000 revolutions per minute 2 pneumatic copy pins at the bottom, 1 copy pin at the top Pneumatic material clamping Minimum quantity spraying device Milling area vertical (top): 330 x 130 mm Milling area horizontal (from front or rear): 220 x 95 mm Stroke: 110 mm With lateral stops Weight: approx. 350 kg

max. workpiece diameter: . mm threading length: . mm max. module: 10 min. module: 1 diameter of hob: 150 mm milling width: 100 mm hob turning speeds: 45 - 560/900 U/min Various reconditioned milling heads and other accessories available for HECKERT ZFWVG 250 long-thread and gear hobbing machines. - Heavy-duty gear hobbing head ApFW (reconditioned) - Heavy-duty thread milling head ApGs (reconditioned) - Thread milling head ApG (reconditioned) - ApGi internal milling head (refurbished) - Various bushing sets - Lunettes - Counterholder with 3-jaw chuck - Various milling mandrels and much more, as shown in the pictures If you are interested in individual items or the entire package, please send me your price proposal. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pehu CNC-besturing 5500 mm invoerrolband met CNC-positionering Admission in spindle (cone x): Mk4 Max drillingdepth: 180 mm Max drillingcapacity: dia 32 mm THROAT DEPTH DRILLING-SPINDLE: 550 mm Speeds: 55 > 5000 rpm Digital read-out: Pehu CNC positioning Motor power: 3 kW

INTOS ?ebrák FN 20 Fräsmaschine Universal + Zubehör Hersteller: INTOS ?ebrák Typ: FN 20 Zustand: gebraucht Baujahr: 2003 Gewicht der Maschine: 910 kg Abmessung: ? Länge mm: 1690 ? Breite mm: 1270 ? Höhe mm: 1175 Aufspannfläche des Senkrechttisches: 216 x 680 Aufspannfläche des Winkeltisches: 240 x 600 Die breite und Abstand der T-Nuten mm: 12H8 x 45 0,1 Spindeldurchmesser im Vorderlager mm: 45 Spindelkegel: ISO 40 Spindeldrehzahlen: 18 Bereich U/min: 50 ? 2000 Vorschübe : 18 Bereich mm: 8 ? 400 Eilvorschub mm/min: 1340 Bewegung des Spindelstockes: ? von Hand: 200 ? selbstständig: 190 Durch Verstellung des Halters erzielte Auslegung mm: 42 Tischlängsbewegung: ? von Hand mm: 300 ? selbstständig mm: 290 Senkrechtbewegung des Tisches: ? von Hand mm: 350 ? selbstständig mm: 340 Lieferumfang: ? INTOS ?ebrák FN 20 Fräsmaschine Universal ? Zubehör  ...

DECKEL FP1 Aktiv Fräsmaschine Hersteller: Deckel Typ: FP1 Aktiv Zustand: sehr gut Steuerungsart konventionell Steuerung Aktiv HEIDENHAIN TNC X-Weg 300 mm Y-Weg 160 mm Z-Weg 340 mm Werkzeugaufnahme SK40 Drehzahl 40-2000 U/min. Steuerung Aktiv HEIDENHAIN TNC Gesamtleistungsbedarf 2 kW Maschinengewicht ca. 0,73 t Raumbedarf ca TBH 1200x1100x1600 mm

Universalfräsmaschine Deckel FP4M Aktiv Hersteller: Deckel Typ: FP4M Zustand: gebraucht, gut Digitalanzeige: 3 ? Achsen- Digitalanzeige Heidenhain Verfahrwege: X ? Achse: ca. 500 mm Y ? Achse: ca. 400 mm Z ? Achse: ca. 400 mm Tischaufspannfläche: ca. 700 x 400 mm Drehzahlbereich: ca. 50 ? 2500 U/min Werkzeugaufnahme: ISO 40 Werkzeugklemmung hydraulisch Antriebsleistung: ca. 6,0 kW Vorschübe & Eilgänge: in allen 3 Achsen Vorschubbereich: ca. 8 ? 630 mm/min Eilgänge: ca. 3,0 m/min L x B x H: ca. 2300 x 1800 x 1800 mm Gewicht: ca. 1750 kg Maschinenleuchte Spindelschutz Lieferumfang: ? 10x Werkzeugaufnahmen ? Hochdruckschraubstock Allmatic ? Dokumentation ? Spindelschutz

Fräsmaschine Macmon M 434 NC Hersteller: Macmon Typ: 434 NC Steuerung: Heidenhain TNC 124 Baujahr: 2008 Zustand: gebraucht X-Achse: 400 mm Y-Achse: 250 mm Z-Achse: 400 mm Aufspannfläche 600 x 320 mm Hauptantrieb: AC-Motor kW 3 Drehzahlbereich: Vertikal stufenlos 30 ? 6300 Horizontal stufenlos 0 ? 4200 ? Vorschub 0 ? 10 m/min Werkzeugaufnahme ISO 40 Betriebsspannungn 400 / 50 Volt / Hz Steuerspannung 24V Gewicht 1200 kg Lieferumfang: ? Dokumentation ? Maschinenfüße ? Kühlmittelanlage ? Spindelschutz ? Maschinenleuchte ? HR410 Handrad ? Horizontalspindel Gegenhalter

Kunzmann WF 7 CNC Fräsmaschine TNC 410 Steuerung Hersteller: Kunzmann Typ: WF 7 Baujahr: 2001 Zustand: gebraucht, unter Strom Steuerung: Heidenhain TNC 410 X-Weg 610 Y-Weg 400 Z-Weg 400 Aufnhame SK 40 Drehzahl 1-5000U/min Kipp/-Schwenktisch Lieferumfang: ? Unterlagen ? Diverse Werkzeugaufnahmen

Kunzmann WF 600 M Fräsmaschine (2012) Hersteller: Kunzmann Typ: WF 600 M Baujahr: 2012 Zustand: gebraucht, sehr gut Steuerung: Heidenhain TNC 124 X ? Achse 600 mm Y ? Achse 400 mm Z ? Achse 400 mm Tischlänge 650 mm Tischbreite 350 mm Spindeldrehzahl 4500 U/min Vertikalpinole und Horizontalpinole ? SK40 Hydraulisches Anzugssystem Hauptantriebsmotor: 5,5 kW Abmessungen ca.: 2 x 2 x 2 m Gewicht ca 2000 Kg Kühlmittelanlage Lieferumfang: ? Dokumentation ? Maschinenleuchte ? Maschinenfüße ? Maschinenschraubstock

Kunzmann WF 4/3 Fräsmaschine TNC 320 Hersteller: Kunzmann Typ: WF 4/3 Fräsmaschine Baujahr: 2009 Zustand: gebraucht, aus Lehrwerkstatt, gereinigt und unter Strom, vorführbereit Spindelstunden: 2.542h x-Weg: 400 mm y-Weg: 350 mm z-Weg: 400 mm Werkzeugaufnahme SK 40 Spindeldrehzahlen 1,0 ? 4.500 U/min Vorschübe 0 ? 2000 mm/min Pinolenhub 60,0 mm Tischgröße 650 x 350 mm T-Nuten 14 H7 Steuerung TNC 320 Motorleistung 5,5 kW Gewicht 1920 kg Raumbedarf ca. 2000 x 2000 x 2100 mm Gesamtleistungsbedarf: ca.7 kVA Zentralschmierung Kühlmitteleinrichtung CE-Konform Lieferumfang: ? Technische Dokumentation ? Vollschutzkabine ? LED Maschinenleuchte

Year: 2008 - technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed - cooling installation - cutter quick change system

Lg.Nr. 26305 Technical data: - Operation via two-hand lever - Material clamping by pneumatic clamping cylinder - Workpiece width / clamping range W 115 x D 100 mm - Milling area at the top after stop / copy template. W 340 x D 100 mm - Stroke at the top T 110 mm - Milling area at the bottom after stop / copy template. W 240 x 90 mm - Stroke bottom front / rear 95 / 45 mm - Spindle speed 12000 rpm - Dosing spray device - Air consumption per work cycle - without spraying 12 ltr - with spraying 24 ltr - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. W 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

MIKRON XSM 400 is a CNC Hochgeschwindigkeits Fräsmaschine, ausgelegt für hochpräzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Verfahrwege X 400 mm, Y 450 mm, Z 350 mm; max. Werkstückgewicht auf dem Tisch 100 kg; Paletten EROWA 320x320 mm, Anzahl Paletten 7; Werkzeugmagazin 68 Plätze. Spindelaufnahme HSK E 40 bis 42000 t/min; Frässpindelmotor 14 kW; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 6500 kg; Abmessungen ca. 4000x4000 mm. Zubehör: Späneförderer; Kühlmitteleinrichtung; Kühlnebelsprüheinrichtung; Papierfilteranlage; Beleuchtung; Kühlmittel-/Nebelabsaugung; Palettenwechseleinrichtung; Zustandsleuchte. Geeignet für enge Toleranzen in Branchen wie Automobil, Uhrmacherei, Werkzeugbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr

ABENE VHF 360 TI ist eine CNC Fräsmaschine für präzise Bearbeitung mit hoher Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 1200x450 mm, Wege X650 Y480 Z475 mm, max. Werkstückgewicht 400 kg, Pinolenhub 75 mm, Schwenkbereich 0–140°, Aufnahme ISO40. Technik: stufenloser Spindeldrehzahlbereich 55–4000 t/min, Vorschübe stufenlos bis 4000 mm/min (X/Y) und 1500 mm/min (Z), Frässpindelmotor 7,5 kW, Gesamtleistung 14 kW, 3x400 V 50 Hz, Maschinengewicht ~2300 kg, Platzbedarf 3000x3000 mm. Zubehör: Bohrspindel, mechanische Handräder, Kühlmitteleinrichtung, Maschinenlampe. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

Tool milling machine Maho, 700C Control : Maho 432, Year of construction 1989, Mounting SK40, Process : X-700, Y-450, Z-500, quill Machine can no longer be viewed under power. Has lost parameters! Would also sell spare parts, table, milling head, drives, control, ...

CNC milling machine, cover FP3A, spare parts machine, control defective / incomplete We sell parts. of this machine, SK40 milling head, with quill, tool changer, ... Control unit, table, spindles, motors, spindle nuts, ... Or total: Euro 1800,- ex works

We are pleased to offer for sale a complete high-precision manufacturing cell designed for the production of long, helical and screw-profile components, including PCP and mud motor rotors, extruder and injection molding screws, compressor and pump spindles. The equipment includes: 1. 2008 LEISTRITZ PW190.8000.HP Peeling / Whirling — Fully Operational Capacity: 120 mm (4.72”) diameter × 8,000 mm (315”) length Machine weight: 92,594 lbs (42,000 kg) 2. 2011 LEISTRITZ LWN300 Milling / Hobbing — Fully Operational 3. 2009 LEISTRITZ PW300PM Milling / Hobbing — Not in Service 4. 2014 WEINGÄRTNER FINISH 450 Finishing / Polishing — Fully Operational This equipment forms a comprehensive production route covering roughing, profile machining, semi-finishing and final surface finishing of long, high-precision helical and screw-profile components. Typical applic ...

Huvema X: 790 - Y: 420 - Z: 420 mm Max longitudinal travel X-axe: 790 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 420 mm Max height workpiece: 440 mm Power on spindle: 3 HP Max quill travel Z´: 127 mm Admission in boring head (ISO): ISO 40 Spindlespeeds: 50 > 3750 rpm Table size: 1300 x 260 mm Digital screen: yes Weight: 1760 kg

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm tool taper: SK40 spindle turning speed range: 110 - 1230 U/min table-size: 270 x 700 mm total power requirement: 3,7 kW weight of the machine ca.: 900 kg dimensions of the machine ca.: 1400 x 1400 x 1700 mm Features: - 3-axis digital display - Milling head swivels ± 45 degrees - Coolant system - User manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872

x-travel: 12000 mm y-travel: 3600 mm z-travel: 1600 mm spindle turning speed - stepless: 5000 U/min spindle motor: 34 kW table-size: 13000 x 2500 mm feeds longditudinal/cross/vertical: 15000 mm/min rapid motion -longitudinal/cross/vertical: 30 m/min no. of tools in the magazine: 100 Stück control: HEIDENHAIN TNC 640 total power requirement: 60 kW weight of the machine ca.: 88 t - CNC Control Heidenhain TNC 640 - Universal Milling Head, Automatic A/B Axis, MILLESIMAL POSITIONING - ATC for 100 tools (ISO 50) - Rotary Table 1500X1500mm, 15t - MOBILE WORKING PLATFORM - PERIMETER FENCES - STATIC RTCP OF ROTATING TABLES - STATIC RTCP IN THE SPACE - AUTOCAL - Vibration Detection Probe - Green Mode Function - Chip Conveyor - Laser Tool Setter - Coolant with Paper Band Filter (High-Pressure 40bar) - Touich Probe - Portable Handwheel Power On: 12400h, Machine ON: 6300h, Program Run: 3950h, Spindl ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)4th Axis package4th Axis package Option includes: - rotary table type EA-510.L NE with indirect measuring system - electrical and pneumatic preparation - software preparation to work with rotary table - cycle TRACYL which allows to define contour on the cylinder - swSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwhe ...

2005Siemens 840D Powerline ShopMillØ630 x 500 mm200 kg115° (-5°/+110°)500 mm450 mm400 mm20-10,000 rpm9 kW13 kW82 Nm0.010 mm0.01 mm24 m/min20 m/minChain magazine with double gripper, 30 positions SK40 (DIN 69871)80-130 mm (speed dependent)290 mm6 kg80 l17 kW4,860 x 4,350 x 2,424 mm2,210 x 2,120 x 2,150 mm4.05 t35,880 h9,609 h400 V / 50 HzDirect linear encoders (X/Y/Z)Heidenhain TS641 (infrared)

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Air coolant external and internalAir coolant external and internal (through spindle centre) switchable via M-FunctionElectronic HandwheelExternal electronic Handwheel

Milling cutters, end mills, drop cutters, reamers, unused Mostly Kestag, Seco, Sandvik, Walter, Böhlerit, ... different diameters, singles, sets or entire batches ! Please request a list !

Angle table of Moho 700C milling machine. very good condition Clamping surface 900 x 500mm, with T-slots Also sell other spare parts of this Maho CNC milling machine, milling head SK40 with quill and clamping, control pult, control parts, drive motor, spindles, ... please inquire Angle table from EMCO milling machine, unused; L-600mm last photo ! Euro 480,-.

SK40 milling head, with flange, with quill and tool clamping, swivelling. good condition. Is from a CNC tool milling machine MAHO 700C, Would also have a smaller one from a DECKEL FP3A. Also with quill and clamp. Also sell other spare parts of this MAHO 700C, clamping table, control parts, motor, spindles, control panel. ...

5 pcs end mill MK, various, incl. SK50 mount For boring mill MK or milling machine SK50 , See also our post End mills ! Also have items with SK40 .

Machine : Vert. Milling head Make : DECKEL, MAHO, WMW, ... Are all swivel and with quill ! A - Universal milling head, DECKEL, of FP3, SK40, with quill stroke 80mm, tool clamping with hydraulics and control panel. swivelling, price: 1200,- B - Universal milling head, MAHO, SK40, with quill and autom. Tool clamping, swivelling, L-33cm, W-30, H-60, swivel device, flange φ approx. 250mm Price : 1200,- Would also have milling spindles - SK30 - SK40

X-axis travel: 1,050 mm Y-axis travel: 550 mm Travel Z-axis: 520 mm Spindle speed (max.): 12,000 rpm Overall height: 2,778 mm Overall width: 2,977 mm Overall length: 3,635 mm Total weight: 6,700 kg Workpiece weight (max.): 800 kg - Control: SIEMENS 828 D incl. OPERATE and ShopMill - Number of magazine slots: 30 - Tool holder: BBT 40 - Internal cooling: 20 bar - Tool weight: max. 8 kg - Tool change time: 3 s - Chip-to-chip time: 5.5 s - Blum probe ZX-Speed IR - Blum 3-D touch probe TC-52 LF

MAKTEK VM 400 CNC vertical machining center was built in 2015 in Poland by MAKTEK Jerzy Zalewski (currently CORMAK). The machine is suitable for both unit and series production, particularly for manufacturing components requiring high precision and repeatability. It enables precise milling, threading and drilling of workpieces using a reliable spindle. The spindle, driven by a high-power motor, reaches a maximum speed of 4000 rpm. It cooperates with an automatic, 10-position tool magazine, streamlining the subsequent machining operations. The rigid design of the MAKTEK VM 400 CNC milling machine ensures stable operation even during intensive use. The machine is equipped with a SIEMENS SINUMERIK 808D MILLING CNC controller with an intuitive interface. The VM400 CNC machining center weighs 1850 kg. Technical specifications of the MAKTEK VM 400 milling center - CNC controller: SIEMENS S ...

IMPORTANT - PLEASE READ If you are interested, please contact us by phone. Location of the machine on request Sale preferably from location, buyer organizes dismantling and transport For sale is a high-precision tool milling machine from the Austrian manufacturer EMCO, model FB-5 (Emcomat). This industrial machine is appreciated in toolmaking, prototyping and training workshops for its excellent geometry and reliability. Equipped with universal table as well as horizontal & vertical spindle for maximum versatility in milling and drilling work including extensive accessory package (various cutter holders/SK40 taper; clamping devices etc.)