bed milling used for sale

x-travel: 1200 mm y-travel: 700 mm z-travel: 750 mm Control: Heidenhain type: TNC 151 table surface area: 1200x630 mm spindle taper ISO: 50 turning speeds: 20-2900 U/min milling-head swivable +/-: total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mm y-travel: 1000 mm z-travel: 1300 mm Control: Heidenhain type: TNC 155 surface area: 3700x1120 mm power capacity: 26 kW transmission ratio: 2 turning speeds: 40-2000 U/min spindle taper ISO: 50 Feed: 3000 mm/min Rapid movement: 8000 mm/min total power requirement: 40 kW weight of the machine ca.: 21 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2500 mm, 1600 mm, 1000 mm

Stock number: 3949 CNC BED MILLING MACHINE Manufacturer: SORALUSE, Type: TL-25 Machine NO.: 101016, Year of manufacture: 1998 Specifications: Table size 2860 x 1000 mm Large table load 7500 kg Longitudinal movement (X) 2500 mm Transverse movement (Z) 1000 mm Vertical movement (Y) 1600 mm Spindle Taper 50 ISO Stepless spindle speeds 20-3000 rpm Spindle motor power 22 Kw Total power 38 kW Tool changer 30 stations Control Heidenhain TNC 426/430 CB Fabr. Controlled vertical head 2.5 degrees Spindle Hours 12272 Hours Rapid traverse 15 m/min Accessories: Cooling by spindle Chip conveyance. Cooling water system. Electronic handwheel Line measuring system Various accessories. Length: 9500 mm, Height: 3820 mm, Width: , Weight: Approx 25.000 kg

2007 Union Bielefeld BF 400 U2 Bed milling machine. Mechanically it is completely fine, but there is a defect in the control system. no Machine is no longer used at all. All motors are running and mechanically everything is fine. I can´t say what exactly is wrong with the control system. Find more here - / Contact us at -

Manufacturer SORALUCE Model TA-D-35A Year 2009 CNC HEIDENHAIN TNC-530 Table Table Surface 1250 x 1,250 mm. Max weight allowed on table 4.000 kg Travels and feeds Longitudinal Travel (X Axis) 3,500 mm. Transversal Travel (Y Axis) 1,200 mm. Vertical Travel (Z Axis) 1,250 mm. Rapid Traverse 25,000 mm/min Main Spindle Head Type Automatic 2.5º/2.5º Taper ISO 50 DIN 69871 AD Turning Speeds 4,000 rpm Head Power 24 kW Equipment Integral protecting guards INCLUDED Chip conveyor INCLUDED Chip conveyor INCLUDED Internal Coolant INCLUDED Deposit 500l with magnetic and paper filter INCLUDED Portable Handwheel Heidenhain HR-410 Others Total Power 46 kVA Machine Weight 18,000 kg Machine Dimension 7,800 x 4,850 x 3,530 mm.

Urban 4 m bed milling machine SK40 against bid. Slightly used, was only rarely used! In February 2023, the machine was set up and put into operation by the company Urban and has only very few operating hours. As an accessory, the machine has a pick-up station including angular head drive. Bids from the Dossenheim location.

X-Hub 4000mm Y-Hub 900mm Z-Hub 950mm Weight: 18.500kg Headstock Range: 100 – 12,000 rpm Spindle design: SK40 Tool Stations: 66pcs. Control Type: iTNC530 Release date

Key data: 2300 mm, 1200 mm, 700 mm

Weight: 22.000kg Headstock Range: 30 – 7500 rpm Spindle design: SK50 Tool Stations: 60pcs. Control Type: iTNC530 Release date : 20

2 column portal gantry milling machine between columns: 2550 mm cooling through spindle total power: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2550 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Control: Siemens Power needed (KVA): 90 Weight: 55 ton ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Manual turning head Hydraulic clamping Longitudinal travel X-axe: 2000 mm Cross travel Y-axe: 1000 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 2200 x 800 mm Power on spindle: 18,5 kWt Admission in millinghead (ISO): ISO 50 Max speedrange: 1500 rpm Control: Heidenhain Weight: 14000 kg

x-travel:3.000 mm y-travel:700 mm z-travel:1.200 mm Spindle RPM:2.500 1/min tool taper:SK50

Inv. Num. : 8284 Type: CS 105 Producer: MECOF Created: 2003, GO 2023 Parameters: Work table length: 6020 mm Work table width: 1060 mm Milling spindle speed: 5-2000 1/min Maximum table load (uniform): 8000 kg X-axis travel: 8300/9300/10300 mm Y-axis travel: 760 mm Travel Z axis: 1200/1700 mm Machine weight: 36000 kg Equipment: Straight extension milling head Universal milling head AC1 Additional table (2 pieces) Additional bracket (2 pieces) GO 2023: Extension head Compensating cylinder leak Transfer 2018: Modification of the steering and drive motor

Immediately available from location, CNC control Heidenhain TNC 155 Travel X: 600 mm Travel Y: 200 mm Travel Z: 150 mm Max. workpiece weight: 300 kg Table clamping surface: 800 x 300 mm Table height: 800 mm Spindle speeds infinitely variable 40-2000 rpm, Drive power 4 kW, Stepless feeds in all directions, Dimensions L x W x H: 2200 x 2700 x 2400 mm Weight approx.: 2000 Kg

Zayer 30KCU/AR 2003

Ho Chun UH-1250A - CNC Bed Milling Machine - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods in all axes - Ball screws - Hydraulic tool feeder - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened membranes - Plastic-coated counter guide -Electromagnet. Main spindle brake - Automatic central lubrication - Integrated coolant system - Steel telescopic cover for transverse path - Steel telescopic cover for longitudinal travel - Work light - Year of construction 2011 Specifications Workbench: - Table clamping surface: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel: - X-axis longitudinal travel: 1250 mm - Y-axis transverse travel: 540 mm - Y-axis - transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and stand: 500 mm Stand: - Z-axis ...

Control Heidenhain ... TNC 426 Table dimensions ... 6020x1060mm Axis X ... 8300mm Axis Y ... 760mm Axis Z ... 1200mm SK 50 Spindle speed ... 5-2000 rpm. Max.table load... 8000kg Machine weight ... 36000kg The machine is in good condition, possible to sample under power.

Key data: 3600 mm, 1250 mm, 1600 mm

Brand: Kiheung Machine No: F668 Type KNC-U1000 CNC brand Heidenhain CNC type TNC 426 Year of construction 2002 Table length 4,100 mm Table width 1,050 mm Maximum table load 8,000 kg X 3,600 mm Y 1,250 mm Z 1,600 mm Holder BT50 Fast 10,000 m/min Speed 0 - 4,000 RPM Movable table Huron Milling Head CNC controlled milling head Conveyor Machine size (LxWxH) 11,000 x 5,000 x 3,800 mm Machine weight 28000 kg Magazine slots: 30 Spindle drive motor: 29 Kw Equipped with 4th axle. Table diameter: 630 mm Ø Load: 900 kg

Ho Chun U-1000B - Universal Bed Milling Machine - 3-axis position indicator - Universal milling head - Hardened and ground guideways - Infinitely variable feeds - Stepless speeds with 2 levels - Horizontal milling device - Hydraulic tool feed - Drive 11 kW - Automatic central lubrication - Coolant device - Table covering - CE certification - Incl. operating instructions and documents - Year of construction 2001 - Complete service carried out Specifications Workbench: - Table clamping surface: 1500 x 360 mm - Table load: 800 kg Travel: - X-axis longitudinal: 1000 mm - Y-axis transverse: 540 mm - Z-axis vertical: 430 mm Workspace: - Distance spindle nose / table: 50 - 480 mm - Distance between spindle center / stand: 350 mm Feeds: - Number of feeds: infinitely variable - Feed longitudinal / transverse: 16 - 1200 mm/min - Feed rate: 8 - 450 mm/min - Rapi ...

Key data: 4300 mm, 1200 mm, 1050 mm

Brand: Anayak Engine No: F607 Type HVM-5000 CNC brand Heidenhain CNC Type TNC-426 Year of manufacture 1997 Table length 5,000 mm Table width 1,000 mm X 4,300 mm Y 1,200 mm Z 1,050 mm Tool Changer 40 Probes Milling head B as gestuurd Huron Milling Head Pivot BT 50 CNC controlled milling head Index after 2.5 ° Number of axes 4 Cooling by spindle Conveyor Machine weight +- 35000 kg Movable column

A Huron CNC bed milling machine is available. Travel X/Y/Z: 2400mm/1000mm/1000mm, control: Heidenhain TNC 415. An on-site inspection is possible.

A Maho CNC 4-axis universal bed-type milling machine is available. Travel X/Y/Z: 1600mm/800mm/800mm, table dimensions X/Y: 1250mm/800mm, max. table load: 3000kg, spindle mount: SK50, main spindle speed: 4000rpm, power: 22kW. Tool positions: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16000kg, control: Philips CNC 232. An on-site inspection is possible.

An NC bed milling machine DPM (Digital Precision Machine) with defective control is available. Travel X/Y/Z: approx. 800mm/430mm/600mm, table dimensions X/Y: 1270mm/255mm, spindle mount: R8/CAT40, speed: 5000rpm, spindle power: 2.2kW, max. table load: 340kg, rapid traverse: 2.54m/min. Dimensions X/Y/Z: approx. 2000mm/2600mm/2300mm, weight: approx. 2500kg. On-site inspection is possible.

Travel X/Y/Z: 1300mm/900mm/1000mm, table dimensions X/Y: 2000mm/750mm, max. table load: 5000kg, rapid traverse: 6m/min. Machine dimensions X/Y/Z: approx. 3650mm/2700mm/2700mm, weight: approx. 9000kg, control: Heidenhain TNC 150. Documentation available. An on-site inspection is possible.

CNC controller: Siemens Sinumerik 3.8 Axes X-axis travel mm: 6.000 Y-axis travel mm: 1.600 Z-axis travel mm: 1.000 B-axis degrees: Automatic head at 2,5º Feed rates m/min: 37 Rapid traverse m/min: 8 Worktable Number of pallets: 3 Table dimensions mm: 6.000 x 1.000 Max. workpiece weight kg: 3.000 Spindle Spindle speed rpm: 213 - 2.000 Spindle drive power kW: 22 Tool system Tool holder: SK-50 Tool magazine slots: 40 With free neighboring places mm: 350 With occupied neighboring places mm: 110 Max. Tool Length mm: 200 Max tool weight kg: 15 Tool-to-tool time s: 11 Cooling Tank capacity: 350 L; 3 to 8 bar Equipment Chip conveyor Mist collector Workarea light Blowing air and cooling outside the spindle Basic machine dimensions / weight Length mm: 10.200 Width mm: 4.700 Height mm: 3.887 Weight kg: 28.000

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1500 mm Control: Heidenhain 355 weight max.: 10 t head swivability: ° : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8678 Type: GBM 31 Producer: GORATU Created: 2006 Parameters: Control system: Heidenhain iTNC 530 Work table length: 3100 mm Work table width: 900 mm Maximum table load (uniform): 6000 kg Maximum vertical spindle speed: 3000 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Power output: 22/27 kW Number of all tools: 24 Number of axes: 4 pieces Machine weight: 13410 kg

Travel: x=1600mm Y=800mm Z=900mm Spindle speed max. 2000 revolutions per minute Control HH 407 A Cover of the z axis present but defective.

MAGNUM YAMA SEIKI BT-1300 CNC bed milling machine was built in 2007 in Taiwan by Magnum Machinery CO., Ltd. The machine, distinguished by its very rigid design and good kinematics, is an excellent choice for precision machining of heavy workpieces. The machining process is performed inside an enclosed workspace, which includes among others a large work table with a length of 1300 mm and a reliable spindle. Feed in the X and Y axes is performed by the work table, while in the Z axis it is performed by the spindle, which moves along precise vertical guides. All this is complemented by the installed MITSUBISHI CNC control, thanks to which the offered YAMA SEIKI BT-1300 CNC bed mill is extremely easy to operate. Technical specifications of the MAGNUM YAMA SEIKI BT-1300 milling machine - CNC controller: MITSUBISHI MELDAS 60S - work table length: 1300 mm - T-slot number: 5 - power: 22 k ...

CNC Floor Milling Machine for Bed CNC control Heidenhain iTNC 530 Controlled NC table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Travel X-axis 8000 mm Y-axis travel 2100 mm Travel Z-axis 1300 mm Travel W-axis 1000 mm C-axis swivel of the milling head body by 360° A-axis swivel of the milling head by 180° Spindle speed 36 - 6,000 rpm Spindle motor 42 / 30 kW Spindle holder DIN 69871-SK 50 Tools in Tool Magazine 48 If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 1600 mm, 800 mm, 650 mm

CNC bed milling machine with Heidenhain control 415, good condition, hydraulic tool clamping, coolant device, central lubrication, lighting,.. Travel X1600/y800/z650/ Spindle holder SK 50 Spin elder speed 60-1800rpm Working feed rate 10-3000mm/min Rapid traverse 10m/min Table clamping surface 1800x610mm Machine weight 9500kg Table load 3000kg Extra -3d button -Kommet Boring Tool -40pcs SK 50 mounts +milling cutter Machine can be viewed under power.

Table dimensions: 5000 x 2000 mm Auction-ID: A7-32339-6

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-9

Table dimensions: 3000 x 1280 mm Including attached clamping table 2000x1200x500 Auction-ID: A7-32339-7

Including attached clamping table 3000x2000x300 Auction-ID: A7-32339-8

Key data: 2000 mm, 1200 mm, 1200 mm

Soraluce bed milling machine with Heidenhain CNC 415, NC swivel head SK 50, chip conveyor, with drilling + milling tools + holders, approx. 50 parts. The machine was used for 1 layer for light machining and is now no longer needed. Please request further data.

This 3-axis Correa XB-420 Bed Type Milling Machine was manufactured in 1990. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this Correa XB-420 Bed Type Milling Machine. Contact us for more information.

This 3-axis Parpas THS125/2000TG was manufactured in 2003. It features a SELCA 3040 control unit, a main spindle with 5000 rpm and 22 kW power, and an electrospindle that reaches up to 28,600 rpm. The machine includes a 24-position tool changer and accessories like a chip conveyor and through-spindle coolant. If you are looking to get high-quality milling capabilities consider the Parpas THS125/2000TG machine we have for sale. Contact us for more information.

This 3-axis Huron X 61 38 bed type milling machine was manufactured in 1991. It is equipped with a Heidenheim TNC 415 control system and offers substantial travel dimensions with an X-axis of 2400 mm, Y-axis of 1000 mm, and Z-axis of 1000 mm. The machines transport dimensions are 3000 mm in breadth, 1400 mm in thickness, and 3000 mm in height. Consider the opportunity to buy this Huron X 61 38 machine we have for sale. Reach out for more information.

This 4-axis GORATU G Master 31 was manufactured in 2006. It features a large table of 3000 x 900 mm, capable of handling a maximum weight of 6000 Kg. The machine offers extensive travel with 3000 mm on the X-axis, 900 mm on the Y-axis, and 1500 mm on the Z-axis. It includes a 24-slot tool changer and a powerful main motor of 22/27 kW. Contact us for more information about this machine.

This 3-axis Nicolas Correa CF-22 Bed Type Milling Machine was manufactured in 1998. It features a universal manual U22 head with dual orientation, hydraulic tool clamping, and an ISO 50 tool taper. The table dimensions are 2,500 × 700 mm, supporting a maximum load of 4,000 kg. Spindle speeds range up to 4,000 rpm, powered by a 29 kW motor. Reach out for further details regarding this machine.

This SACHMAN TRT314 H was manufactured in 2008. A robust bed type milling machine featuring a large table size of 1200 x 1200 mm and extensive X, Y, Z travels of 2500 mm, 1400 mm, and 1500 mm respectively. It includes a SELCA S 4045 PD CNC for precise control and dual chip conveyors for efficient chip evacuation. Consider the opportunity to buy this SACHMAN TRT314 H bed type milling machine. Contact us for more information.

Año de Fabricación 1999 CNC HEIDENHAIN TNC-430 Superficie de la mesa 2500 X 700 mm. Recorrido Longitudinal (Eje X) 2500 mm. Recorrido Transversal (Eje Y) 800 mm. Recorrido Vertical (Eje Z) 800 mm. Avances (X/Y/Z) 5.000 mm/min Avance Rápido Ejes 12.000 mm/min Cono Cabezal ISO 50 Gama de Revoluciones 4000 rpm Potencia de cabezal 22 Kw Peso Admisible sobre mesa 4.000 kg. Peso de la Máquina 10.000 kg. Cabezal Automático 2,5° / 2,5° Amarre Hidráulico de Herramientas INCLUIDO Dimensiones Maquina 6450X2700X2830 mm

This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine.

This 4-axis JOBS FRAZER cnc milling machine was manufactured in 2017. It features a large fixed table of 3100x1000 mm and high-speed axes capable of up to 35 m/min, ensuring efficient machining. The machine includes a Heidenhain iTNC 530 HSCI CNC for precise control and a 24-position disc tool magazine. If you are looking to get high-quality milling capabilities, consider the JOBS FRAZER machine we have for sale. Contact us for more information.

x-travel: 4500 mm y-travel: 2000 mm z-travel: 1200 mm spindle taper: ISO 50 Cube: 2 weight of the machine ca.: 20.000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reckermann Combi, 1000 milling machine Has run until the end, in good condition to give away cheaply Sale without guarantee and warranty

Inv. Num. : 8965 Type: FSQ 80 NC Producer: TOS Created: 1989 Parameters: Control system: HEIDENHAIN NS 700 Work table length: 3000 mm Work table width: 800 mm Maximum vertical spindle speed: 2500 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine height: 3500 mm Machine length: 5660 mm Machine width: 4400 mm Machine weight: 18000 kg

This 3s MECOF CS 88 G Bed Type Milling Machine was manufactured in 1990. It features a working table length of 6,000 mm and a maximum permissible load of 8 tons per meter. The spindle motor power is 14.7 kW, with a speed range of 10 – 1,207 rpm. If you are looking to get high-quality milling capabilities, consider the MECOF CS 88 G machine we have for sale. Contact us for further details.

This 3-axis Parpas MT100 was manufactured in 1995, featuring a large working envelope of 3500x2000x1000 mm and equipped with 2 cast iron teams. Ideal for complex milling tasks, consider the opportunity to buy this Parpas MT100 Bed Type Milling Machine. Contact us for more information.

This 3-axis Parpas SL100 Bed Type Milling Machine was manufactured in 1989. It features a large working envelope of 2500x1500x1000 mm and is equipped with 2 steel teams. Consider the opportunity to buy this Parpas SL100 Bed Type Milling Machine. Contact us for more information.