bed milling used for sale

Dmg DMU 125P Hidyn Machining Center ::SPECIFICATIONS::: CNC Model: Heidenhain Tool holder: SK 40 Spindle speed: 20000 Number of tools: 60 X-axis stroke: 1250mm Y-axis travel: 880mm Z-axis stroke: 800mm Rotary Table: Yes Rotary Table Type: Continuous Table size: 1250 x 1000mm Allowable load on the table: 1500Kg Fourth and fifth axis head: yes Fourth and fifth axis head type: continuous High refrigerant pressure: yes External tank system with filter: yes Chip conveyor: belt conveyor :::D DIMENSIONS AND WEIGHT::: Weight: 18500Kg

For sale: Kiheung cnc milling machine type Point-U6 with Huron Universal milling head with Heidenhain control. The X, Y and Z axis movement is 1600 x 720 x 760 mm. Table size is 2.200 x 550 mm. Main motor power 11 kW, speed range 40 - 1,600 rpm/min. ISO 50 spindle mount. . Machine weight is 8,000 kg. The machine is in good condition. Still visible under power. Available at short notice, subject to prior sale.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: each 150 by 181 mm 48 mm high -Drawing with the photos -Dimensions: 390/115/H310 mm -Weight: 34 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 125 by 160 mm 25 mm high -Drawing with the photos -Dimensions: 300/110/H205 mm -Weight: 14 kg

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Acquisition shaft: Ø 20 mm -Tool: mm -Dimensions: 250/80/H170 mm -Weight: 4.7 kg

Stock number: 3886 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 15521, Year of manufacture: 2002 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30,000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 530 Fabr. Operating hours spindle 10220 hours Accessories: Chip conveying. Cooling water system. Probe Renishaw OMP 60 Cooling by spindle Spindle Cooling Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weig ...

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm -Weight: 1.8 kg

DMG DMU 75 monoBLOCK universal machining centre (5-axis): Year of construction 2015 Travel 750 mm x 650 mm x 560 mm Heidenhain TNC640 control system with DXF import option Tool magazine with 60 places Tool holder HSK-A 63 Spindle with 18,000 rpm Production package with scraper belt conveyor Coolant system 600 litres with IKZ 40Bar Blowing air through spindle center Blum Laser Tool Measurement Heidenhain Probe TS649 Oil and Emulsion Separation Plant Rinsing gun Operating mode 4 Zero-point clamping system from Lang Weight: approx. 9.5t Machine times (as of 04/2024): Machine on: 16.665h Spindle on: 3.386h

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.4 kW at 11300 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 20 mm -Tool: mm -Dimensions: 250/60/H130 mm -Weight: 3.8 kg

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.05 kW 18000 rpm at 300 Hz -Voltage: 165 volts -Take shaft: Ø 16 mm -Tool: Ø 70 x 25 mm -Dimensions: 285/60/H140 mm -Weight: 3.6 kg

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Table size mm 320×1320 Table turning (left – right) degree 45° Travels, X/Y/Z mm 950/320/460 Spindle taper ISO 50 Number of speeds 18 Spindle speed range rpm 40÷2000 Longitudinal and cross feeds range mm/min 12,5÷630 Vertical feeds range mm/min 5÷262 Main motor power kW 7,5 Overall dimensions mm 1747×2050×1780 Weight kg 2850

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Hole: Ø 50 mm -Weight: 14 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 15 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm -Weight: 9 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -right tool -Socket: Ø 50 mm -Weight: 14 kg

Axis:XYZ (3-axis) Max. travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530

Axis:XYZ (3-axis) Max. travel: 500x450x400 Tool:CAT-50 Control:SEICOS A10M Dimensions: 3180x2200x2500mm

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Year: 2016 - technically efficient, ready to work - after full service - spindle 2.2 kW - axis movement range: X – 2675 mm, Y – 355 mm, Z – 224 mm - pneumatic rotary table A: -90° / 0° / +90° - 4 pneumatic clamps - magazine for 6 tools - automatic quick tool change system - cooling and lubrication installation - operator panel, Windows 7 with online access - protective cabin - weight 1400 kg, dimensions: 3600 x 1660 x 1900 mm

Slotted discs, window milling tools, indexable inserts, window construction tools -Slotted discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Hole: Ø 40 mm -Price/Sale: complete -Quantity: 1x pallet of tools, various sizes -Weight: 46 kg

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

DMG MORI SEIKI DMC 635 V Ecoline CNC machining center was built in 2013. The machine, designed for precision machining of workpieces, is distinguished by its extremely stable construction made of high-quality cast iron, which perfectly dampens any vibrations and oscillations. To achieve the highest precision and accuracy, reliable components in the form of cutting tools and a high-speed spindle are used in the machining process. Tools are changed in a very short time, so that the overall milling time is significantly reduced. The DMG DMC 635 V ECO CNC vertical machining center is offered with a modern touchscreen control panel and integrated chip conveyor. To this date, the machine has only worked for 9069 hours. The DMC 635 V ECOLINE milling center weighs 3900 kg. Technical specifications of the CNC milling machine DMC 635 V ECO - number of axes: 3 (X,Y,Z) - feed in the X/Y/Z ax ...

Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -Dufix: Nr/Var 46616 -Socket: Ø 50 mm -Weight: 6.8 kg

Tool holder, milling tool holder -Recording: SK50 -End milling cutter: MK5 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Weight: 6 kg

Collet set 15 pieces with drill chuck Vertical Drilling and Milling Head - T-Slot Width 12 mm Cutter head Coolant Setup x - travel 500 mm y - travel 200 mm z - travel 400 mm Feed: 5.6 - 238 mm/min with quill stroke Speed: 35.5 - 1800 rpm with rapid traverse Clamping area: 800 x 300 mm Total power requirement 16 A Spindle holder ISA 40 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Tool holder, milling tool holder -Recording: SK50 -End milling cutter: MK5 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Weight: 6 kg

Tool holder, milling tool holder -Recording: SK50 -End milling cutter: MK3 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Weight: 3 kg

Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps - infeed and outfeed feeders - cooling and lubrication installation

Key data: 800 mm, 670 mm, 500 mm

High-speed milling machine for graphite machining Year of manufacture 2004 with a lot of accessories such as collets, graphite vacuum cleaners, etc.

Tool holder, milling holder, milling tool, adapter, clamping unit -Milling tool: Milling adapter ring set -Various sizes: see photos, more pictures can be sent -Dimension box .: 280/180 / H80 mm -Weight: 3.3 kg

Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Price/Sale: complete -Overall dimensions: 220/140/H110 mm -Weight: 4.2 kg

Stock number: 3896 PROCESSING Manufacturer: HERMLE , Type: C800 V Machines NO.: 14337, Year of manufacture: 2001 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Stepless spindle speeds 0-16000 rpm Spindle motor 25/16.8 Kw Total power 31 KVA Control Heidenhain 430 - 3 Axis Fabr. Operating hours spindle 9666 hours Accessories: Tool holders 2 pcs Operating instructions Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weight: 7000 kg

Key data: 500 mm, 400 mm, 300 mm

Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !

revolutions per minute: 8000 U/min x-travel: 1000 mm y-travel: 500 mm z-travel: 570 mm Control: Siemens weight of the machine ca.: 5000 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Collet holder, tool holder, tool holder, milling holder, milling tool -Milling adapter: SK50 5 pieces -Type: different versions see photos -Tool holder: Ø 12/14/16 mm -Price / fee: complete -Dimensions: 400/300 / H160 mm -Total weight: 19.1 kg

Notching milling machine -automatic hydropneumatic milling feed -Maximum cutter diameter: 250 mm

Tool holder, milling holder, milling tool, cutter head, milling arbor -Milling holder: tool holders SK40 -Cutter holder: O 3.5 mm -Number: 2x milling fixtures available -Price per piece -Dimension: Ø 63/118 mm -Weight: 0.9 kg / pc.

Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, short-shaft system -Manufacturer: DEPO, milling mount SK50 -Type: 100 5 77 -Milling tool holder: conical, Ø 34/24 mm M16 -Dimension total Ø97x385mm -Weight: 5.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Milling holder: SK50 2 pieces -Type: different versions see photos -Milling tool holder: M16 -Price/delivery: complete -Total dimensions: 190/100/H260 mm -Total weight: 6.3 kg

Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg

Tool holder, milling holder, collet holder, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Sandvik Coromant milling holder SK45 -Type: 390.140-45 50 027 -Dimension: O83 x 140 mm -Weight: 1.7 kg

Tool Milling Machine Cover FP3 2201 Travel XYZ: 500-300-380mm Spindle holder : ISO 40 S20x2 Spindle speeds: 40 to 2000 Universal table (or angle table) With active digital display on 3 axes Heidenhain TNC 113 Drill quill hor and vert Stepless feed and rapid traverse on all 3 axes Motor 3 Kw Built in 1979 220 Volt 3ph (with transformer 400-220V if necessary) The machine has been technically tested

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B45 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 3.9 kg/pcs.

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Fahrion, milling chuck with accessories -Type: NCGFLK 160-AD+B50 -Number: 8x chuck available -Price per piece -Dimensions box: 270/195/H110 mm -Weight: 4.9 kg/pcs.