bed mill used for sale

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-68

1900x1400x2150 Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-70

Year of Make: 2015 Machine type: BC 1001 HS Total production hours: 1608h Total standby time: 5070h

Cobalt milling machine set, 20 pieces High quality HSS M42 - 8% Coabalt milling cutters. Supplied in a beautiful wooden storage box. Technical specifications of the HBM 20-piece HSS - 8% cobalt cutter set. The set consists of the following keyway cutters: 3 - 4 - 5 - 6 - 8 - 10 - 12 - 14 - 16 - 20 mm. The set consists of the following end mills 3 - 4 - 5 - 6 - 8 - 10 - 12 - 14 - 16 - 20 mm. Condition: never used / new (5) Auction-ID: A7-46460-613

Equipment: 3-axis digital display Digital depth display Motorized feed for X and Y Left/Right Run Emergency stop Swivelling drill head Spindle protection. Machine Light Tool case with contents Drilling capacity in steel 35 mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 40 Spindle speeds 115 - 1750 rpm Table adjustment transverse 375 mm Table adjustment longitudinal 175 mm Table clamping area 1000 x 240 mm Max. distance between work table and spindle nose 120 - 375 mm Connection voltage 400 V Total power requirement 0.85 / 1.5 kW Machine weight approx. 0.95 t Space requirement approx. 1.3 x 1.2 x 2.1 m Condition: never used / new (5) Auction-ID: A7-46460-525

Drilling and milling machine (demonstration machine) with - Cross support - Feed via hand crank - Chip protection - 16mm drill chuck - Mechanical MK tool clamping Drilling capacity in steel 16 mm Projection 180 mm Drilling stroke 85 mm Spindle Holder MK 2 Spindle diameter 47 mm Spindle speeds 320 - 3300 rpm Table adjustment transverse 230 mm Table adjustment longitudinal 100 mm Table clamping area 420 x 155 mm Connection voltage 230 V Total power requirement 0.75 kW Condition: never used / new (5) Auction-ID: A7-46460-563

Equipment: 3-axis digital display. Pinole path has separate digi display. Automatic feed in X-axis and quill. Motorized Z-axis. Tapping device. Coolant system. Machine base. Collet set, SK tool holder. Other machine accessories in box. Drilling capacity in steel45 mm Quill stroke 125 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm Spindle speeds 75 - 3200 rpm max. cutter diameter 80 mm Spindle holder ISO 30 max. distance between work table and spindle nose 460 mm Projection 230 mm Connection voltage 230 V Total power requirement 1.5 kW Machine weight approx. 580 kg Space requirements approx. 1.2 x 1.0 x 2.1 m Condition: never used / new (5) Auction-ID: A7-46460-554

Equipment: - Digital display - Coolant system - Huron milling head - Emergency stop facility - Documentation x-travel 710 mm y-travel 250 mm z-travel 400 mm Table size 1200 x 300 mm Conventional control Mounting SK40 Speed range 50 - 2500 rpm Total power requirement 2.2 kW Machine weight approx. 1.7 t Dimensions L x W x H 2.1 x 2.0 x 1.6 m Auction-ID: A7-46460-413

Facilities Two-stage gearbox via flat belt (no longer plastic gears) Infinitely variable speed range Quill fine feed via switchable handwheel Digital quill depth display Right-left rotation Robust dovetail guides with adjustable wedge strips Bellows covers for the guideways Adjustable control panel Chip protection with safety circuit Machine base optional. Drilling capacity in steel 25 mm Projection 185 mm Drilling stroke 50 mm Spindle mount MK 3 Spindle speeds: 50 - 2500 rpm Table adjustment transverse 178 mm Table adjustment longitudinal 480 mm Table clamping area 700 x 180 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 160 kg Space requirement approx. 0.75 x 0.8 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46460-495

Universal Milling Machine - Huron Head - Mounting device for Huron head - horizontal counter holder - Documentation - Coolant system - Machine feet x-travel 700 mm y-travel 250 mm z-path 300 mm Table size 1000 x 230 mm Spindle holder ISO 40 Spindle speeds 35- 1500 rpm Total power requirement 3.0 kW Machine weight approx. 1.4 t Dimensions L x W x H 1.55 x 1.4 x 1.65 m Auction-ID: A7-46460-457

Drilling and milling machine with Powerful 2-speed engine. Recording MC 3 - B16. Drill chuck 3 - 16 mm. Left/right switch. Spindle protection. Fine tuning. Ejection wedge. Clamping threaded rod for tool Related tools. Drilling capacity in steel 32 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 425 mm Table clamping area 700 x 210 mm Connection voltage Vmax. Distance between work table and spindle nose 470 mm Total power requirement 1.5 kW Machine weight approx. 230 kg Dimensions approx. 0.75 x 1.05 x 1.2 m Condition: never used / new (5) Auction-ID: A7-46460-501

Machine equipped with: - Digital display - Machine light - Coolant device - Machine feet Technical Details / Accessories / Addition: Value Unit Technical data: x-travel 600 mm y-travel 270 mm z-travel 430 mm Upper slide - travel 630 mm Table size 1120 x 270 mm Spindle speeds: 45 - 1660 rpm Spindle holder SK 40 Conventional control Spindle drive 2.2 kW Total power requirement 2.4 KVA Machine weight approx. 1.35 t Dimensions L x W x H 1.8 x 1.4 x 1.8 m Auction-ID: A7-46460-472

Technical data Manufacturer: MAHLO Type: FU 1300 Machine number: 2257 Voltage: 220–380 V / 50 Hz Clamping surface: 1300 x 300 mm T-slots: 5 (spacing 60 mm) Travel (X/Y/Z): 950 / 275 / 500 mm Spindle holder: ISO 40 Speed range: 30–1200 rpm Weight: approx. 1750 kg Configuration Accessories: 1 HILMA machine vice, 1 RÖHM four-jaw chuck, diameter approx. 200 mm Application: General milling work in tool and mechanical engineering Auction-ID: A1-46480-2028

Drilling/milling machine with: • Drilling capacity 40mm • Milling capacity 32mm • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 730 x 210 mm Connection voltage 400 V Drill feeds: 0.1 - 0.18 - 0.26 mm/rev Total power requirement 1.1/1.5 kW Machine weight approx. 0.35 t Space requirement approx. 0.8 x 0.75 x 1.85 m Condition: never used / new (5) Auction-ID: A7-46460-536

Equipment: - Digital display - Coolant system - Milling head with quill x-travel 600 mm y-travel 400 mm z-travel 320 mm Table size 900 x 420 mm Conventional control Mounting SK40 Speed range 35.5 - 1800 rpm Quill stroke yes mm Total power requirement 5.0 kW Machine weight approx. 1.45 t Dimensions L x W x H 1.6 x 1.2 x 1.9 m Auction-ID: A7-46460-444

Universal Milling Machine - Digital display - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Counter bearings - Chip tray x-travel 400 mm y-travel 320 mm z-travel 440 mm Table size 80 x 325 mm Spindle holder ISO Sk 40 Spindle speeds: 63 - 3150 rpm Quill stroke 60 mm Total power requirement kW Machine weight approx. 1.5 t Dimensions L x W x H 1.8 x 1.8 x 1.9 m Auction-ID: A7-46460-540

Universal Milling Machine - Digital display - Chip protection - Coolant system - Machine light - Chip tray x-travel 560 mm y-travel 300 mm z-travel 420 mm Table size 1055 x 240 mm Spindle holder ISO Sk 40 Spindle speeds 40 - 1550 rpm Total power requirement 5.5 kW Machine weight approx. 1.3 t Dimensions L x W x H 1.6 x 1.5 x 1.85 m Auction-ID: A7-46460-401

Milling machine with - Heidenhain TNC 135 - Rapid traverse - Milling head with hydr. Tool sparing - Coolant system - Central lubrication x-travel 1000 mm y-travel 450 mm z-travel 450 mm Table clamping area 1370 x 400 mm Number of T-slots 5 pcs. Spindle speeds: 32 - 1500 rpm Tool holder SK 50 Total power requirement 7.0 kW Machine weight approx. 3.1 t Dimensions L x W x H 2.1 x 1.7 x 1.9 m Auction-ID: A7-46460-409

Drilling/milling machine with: • Tapping device • Cross table with adjustable guides • Drill quill feed • Manual transmission • SK 40 mount Drilling capacity in steel 40 mm Projection 275 mm Drilling stroke 120 mm Spindle Holder MK 4 Speed range 75 - 3200 rpm Table adjustment transverse 190 mm Table adjustment longitudinal 490 mm Table clamping area 700 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1/1.5 kW Condition: never used / new (5) Auction-ID: A7-46460-404

ZAYER 4BM horizontal milling machine Technical characteristics Brand: ZAYER. Model: 4BM. Serial number: 35121. Type: Horizontal milling machine. Motor power: 11.75 HP. Power supply: 220 V. Frequency: 50 Hz. Phases: 3. Intensity: 32 A. Untested operation. The batch is delivered loaded by truck. Dismantling and loading costs are indicated as additional costs. Auction-ID: A7-46053-1

Horizontal milling machine - Incl. partial table x-travel 780 mm y-travel 220 mm z-travel 410 mm Table length 1100 mm Table width 270 mm Spindle speeds 40 - 960 rpm Spindle holder SK 40 Total power requirement kW Machine weight approx. 1.7 t Space requirements approx. 1.8 x 1.6 x 1.8 m Condition: unchecked (6) Auction-ID: A7-46460-515

Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right Switch Head swivel left/right 90° Spindle protection. incl. toolbox with various tools Drilling capacity in steel25 mm Projection 175 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle holder ISO 30 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 380 mm Table adjustment longitudinal 175 mm Table clamping area 700 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-46460-458

Equipment: - Heidenhain digital display - Feed and spindle infinitely variable - Coolant system - Chip protection - hydr. Vise - Good condition - SK40 Tool Holders and Accessories see pictures x-travel 850 mm y-travel 300 mm z-travel 450 mm Table size 1100 x 250 mm Conventional control Mounting SK40 Speed range 35.5 - 1800 rpm Quill stroke mm Total power requirement 5.0 kW Machine weight approx. 1.25 t Dimensions L x W x H 1.8 x 1.7 x 1.8m Auction-ID: A7-46460-432

Equipment: Drill chuck with ISO-30 mount Digital depth display Left/right switch. Emergency stop Swivelling drill head Spindle protection. Feed via handwheel. Small tool case Machine base optional. Drilling capacity in steel 45mm Projection 230 mm Drilling stroke 125 mm Spindle holder ISO 30 Spindle speeds 75 - 1600 rpm max. cutter diameter 80 mm Table adjustment transverse 560 mm Table adjustment longitudinal 230 mm Table clamping area 800 x 240 mm max. distance between work table and spindle nose 460 mm Connection voltage 230 V Total power requirement 1.1 kW Machine weight approx. 320 kg Space requirements approx. 1.0 x 0.8 x 1.45 m Auction-ID: A7-46460-476

Equipment: - New TFT screen - Coolant system - Hydraulic tool clamping - Milling head with quill - Documentation x-travel 410 mm y-travel 310 mm z-travel 400 mm Table size 700 x 280 mm Control Heidenhain TNC 145 Mounting SK40 Speed range 40- 2,000 rpm Rapid traverse speed 1.5 m/min Feed speed 1500 mm/min Drive power 2.2 kW Quill stroke 63 mm Weight 1.3 t Total power requirement 2.2 kW Machine weight approx. 1.5 t Dimensions L x W x H 1.4 x 2.1 x 2.0 m Auction-ID: A7-46460-469

Drilling and milling machines: digital depth and speed display, 2 gear stages with fine adjustment and variable speed, Includes left-right switch Left and right swivel head Comes with associated tools Drilling capacity in steel 25 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 16 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 280 mm Table adjustment longitudinal 155 mm Table clamping area 500 x 180 mm Connection voltage 230 V max. distance between work table and spindle nose max. 320 mm Total power requirement 0.8 kW Machine weight approx. 150 kg Dimensions approx. 670 x 550 x 910 m Condition: never used / new (5) Auction-ID: A7-46460-414

CNC Milling Machine - Heidenhain TNC 310 with handwheel - hydr. Tool Clamps - Central lubrication - Coolant system - Machine light - Machine feet - Enclosure x-travel 600 mm y-travel 400 mm z-travel 400 mm Table size 800 x 400 mm Spindle holder ISO Sk 40 Spindle speeds: 10 - 3150 rpm Quill stroke mm Total power requirement 12.0 kVA Machine weight approx. 2.2 t Dimensions L x W x H 2.0 x 1.85 x 1.95 m Auction-ID: A7-46460-587

Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. Powerful 2-speed engine. Left/Right Switch Head swivel left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. Spindle protection. incl. toolbox with various tools Drilling capacity in steel30 mm Projection 200 mm Drilling stroke 70 mm Capacity finger milling machine 16 mm Spindle mount MK3 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 565 mm Table adjustment longitudinal 220 mm Table clamping area 840 x 210 mm Connection voltage 400 V max. distance between work table and spindle nose max. 470 mm Total power requirement 1.1 kW Machine weight approx. 230 kg Space requirements approx. 0.75 x 1.05 x 1.3 m Condition: never used / new (5) Auction-ID: A7-46460-546

Milling unit with holder for disc cutter sepatae drilling unit Deh Speeds 1750rpm 1.5 KW Pneumatic clamping unit see pictures Auction-ID: A7-46460-573

Drilling/milling machine with: • Digital display • Digital depth gauge for quills • Adjustable guides through wedge strips • Large 12-step speed range from 75 - 3200 rpm • Extremely smooth running due to hardened and ground gears running in oil bath • Right-counterclockwise rotation • Prism guides in all axes • Gear head can be swivelled 90° • Chip protection with safety circuit Machine base optional. Not included. Drilling capacity in steel 40 mm Projection 290 mm Drilling stroke 130 mm Spindle holder SK 40 Spindle speeds 75 - 3200 rpm Table adjustment transverse 500 mm Table adjustment longitudinal 230 mm Table clamping area 720 x 210 mm Connection voltage 400 V Milling cutter diameter max. 80 mm Total power requirement 1.1 kW Machine weight approx. 0.35 t Dimensions approx. 1.1 x 0.9 x 1.2 m Condition: never used / new (5) Auction-ID ...

Universal tool milling machine - Digital display - Horiz. Milling device - Coolant system - Vise - Instruction manual x-travel 600 mm y-travel 410 mm z-travel 200 mm Speed range - horizontal 30 - 1280 rpm Speed range - vertical 50 - 2150 rpm Head swivels +/- 90° Spindle holder ISO SK40 Table area 1000 x 315 mm Total power requirement 3.2 kW Machine weight approx. 1.44 t Space requirement approx. 1.6 x 1.7 x 2.1 m Condition: unchecked (6) Auction-ID: A7-46460-538

Milling machine with - Toolmaker's table - Heidenhain digital display - Rapid traverse - Coolant system - Central lubrication - Machine feet - Incl. drawer cabinet with contents x-travel 600 mm y-travel 400 mm z-travel 400 mm Table clamping area 720 x 410 mm Spindle speeds 40 - 2000 rpm Tool holder SK 40 Total power requirement 3.0 kW Machine weight approx. 1.4 t Dimensions L x W x H 1.8 x 1.6 x 1.9 m Auction-ID: A7-46460-411

Drilling and milling machine with - Variable spindle speed - Cross support - Rotatable spindle head left/right 90° - Feed via hand crank Drilling capacity in steel 16 mm Projection 185 mm Drilling stroke 50 mm Capacity finger tiller 20 mm Spindle Holder MK 2 Spindle speeds 100-1500 / 200-3 rpm Table adjustment transverse 175 mm Table adjustment longitudinal 280 mm Table clamping area 500 x 180 mm Connection voltage 230 V Total power requirement 0.85 kW Machine weight approx. 0.12 t Space requirement approx. 0.86 x 0.6 x 0.9 m Condition: never used / new (5) Auction-ID: A7-46460-504

Drilling and milling machine with - Variable spindle speed - Digital depth display - Left/right switch - Cross support - Swivelling spindle head - Feeds via hand crank - Tool case with contents Drilling capacity in steel 13 mm Projection 170 mm Drilling stroke 50 mm Capacity finger milling machine 13 mm Spindle Holder MK 2 Spindle speeds: 50 - 3000 rpm Table adjustment transverse 220 mm Table adjustment longitudinal 160 mm Table clamping area 500 x 140 mm Connection voltage 230 V Total power requirement 0.5 kW Machine weight approx. 0.06 t Space requirement approx. 0.6 x 0.45 x 0.76 m Attention: Machine is without digital display! Condition: never used / new (5) Auction-ID: A7-46460-488

CONTROLS   CNC controls NUM 1060 WORKING RANGE TURNING   swing diameter (max): 2000 mm   workpiece weight max.: 25000 kg CROSS BEAM SLIDE   - rotation speeds (min): 2 /min   - rotation speeds (max): 450 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4100 mm   space requirements -front/back-: 3500 mm   total height: 5600 mm

A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

Key data: 600 mm, 400 mm, 400 mm

MAHO MH 600 E CNC milling machine – used, functional (only for commercial use) For sale is a MAHO MH 600 E CNC milling machine from 1989 in used condition. The machine shows signs of wear and tear according to its age, but is basically in functional condition and is currently under power, so that an inspection and demonstration during operation is possible at any time by arrangement. Technical data: Travels: X 600 mm / Y 450 mm / Z 450 mm Spindle speed: max. 4,000 rpm Tool holder: SK40 Condition / Notes: Machine running and ready for use All axes can be moved Control system functional Z-axis clearly audible during the process (according to the fitter's statement, not unusual for this type) Slipper clutch of the Z-axis is oily and should be replaced when the opportunity arises Note: Sale only to tradespeople Under exclusion of any warranty and guarantee N ...

Spindle vertical stroke 150 mm Table size 1300x450 mm For ISO 40 cones Max piece weight about 1000 kg Accessories and tools INCLUDED DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-28

Multi-purpose machine rarity Circular saw, milling machine, slotted hole drilling machine in one machine Solid Casting Block Auction-ID: A1-46501-2596

Bäuerle table milling machine with swivelling table Auction-ID: A1-46501-2584

Length 2100mm 320 x 120 1 piece 320 x 160 2 pieces 200 x 100 5 pieces With Atlas connectors on the front side Auction-ID: A1-46501-2089

Auction-ID: A1-46501-2986

Festool cordless screwdriver with two batteries in plastic box Bosch Lamello milling machine green, 220V Black & Decker, Eccentric Sander 220V In plastic box Auction-ID: A1-46501-3002

1pc steel 125x50x30 1pc aluminum 125x50x30 1pc steel 100x50x30 1pc steel 85x100x30 1pc steel 150x51x30 Auction-ID: A1-46501-2149

Mobile breadcrumb mill, with collection container + drawer Auction-ID: A7-45960-182

LAMELLO ZETA P2 CORDLESS GROOVE MILLING MACHINE, DIA The battery-powered P-System groove milling machine, with which all connecting fittings of the Lamello P-System can be milled quickly and precisely. After changing the milling cutter, classic flat dowels can also be milled in. TECHNICAL DATA Voltage: 18 V Speed: 9,000 rpm Cutting Material: DIA Number of cutting edges: Z3 Max. milling depth: 20 mm Weight: 3.7/4.1 kg with battery 4.0Ah/5.5Ah FEATURES AND BENEFITS Fast, form-fitting anchoring of all P-System fittings. After changing the milling cutter, classic flat dowels made of wood can be milled in. Member of the \"Cordless Alliance System\" CAS → batteries from external companies of the CAS compatible. Time saved, as fittings are simply inserted by hand - no additional fastening material required. A wide variety of mounting brackets can be realized by swivel stop. Cabinet connec ...

diameter mill: 880mm, width bunker 3180mm, equipped with: towing eye tightening, Scania DSC 1455 V8 turbo diesel engine, 425/65R22.5 tires, air brakes, Dutch license plate registration, LED work lighting, hydraulically driven conveyor belt (5000mm), wiring remote control, 1.5 to 14mm sieve, Auction-ID: A1-40137-31

milling unit with double segment suspension, Quick-change system for milling spindle Milling table opening 230 mm, Under-sink extraction Electric height adjustment of the tiller Electric angle adjustment 90°-45° with end stops in the end positions Digital LED display for milling spindle height and waves Milling spindle D-30 mm, shank length/clamping length/ Effective length (90°) 117/124/115 mm, 3500/6500/8000/10,000 rpm Dispensing and slotting table Z ANODIZED length 1000 mm, table movement 1000 mm Sliding table prepared Tap and slot clamping set.Router table size with Sliding table L = 1010 mm x W = 760 mm Milling fence \"230\" Milling fence with infinitely variable fine adjustment of the acceptance side, quick clamping ADDITION: Feeder S\"308\" 3 x 400 V - 50 Hz Technical data: 8 feed speeds: 3.2/6.3/8.3/ 12.5/16.7/25/32/63 m/min., forward and return 3 wheels, D= 120 mm Roll wi ...

Auction-ID: A1-46501-2133

Oertli high-performance folding cutter with indexable inserts Z3 Auction-ID: A1-46501-2146