bed mill used for sale

Stainless Steel Control Box, Control Cabinet PAGUS 600 x 245 x 775 mm ( 600x245x775mm ) with control panel SIEMENS Operation Panel Coros OP 15-C1 6AV3515-1MA20-1AA0 SIEMENS 6ES7 214-1AC01-0XB0 6ES7 223-1HF00-0XA0 Dimensions: 600 x 245 x 775 mm

turning diameter: 800 mm turning length: 900 mm control: Fanuc 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: D726, Coater/fluid bed, stainless steel,, Niro type Combi Coata II,, for filmcoating tablets/capsules/granulates., Electric heating., Sprayfunction ex. pump., 20 l. product container., Material: Stainless steel AISI 304

Stock number: D699, Fluid bed, stainless steel,, type EB 20, for filmcoating of caps./tablets., Electric heating., 20 l. product container., Watson-Marlow feed pump., Steering panel., Material: Stainless steel AISI 304

Stock number: D693, Hose fluid bed table, stainless steel,, with heat and blower and timer,, with space for 5 pc. hose., L 3750 x W 620 mm., Material: Stainless steel AISI 304

• Suitable for drying and granulation (intended for preparations for in vitro diagnostic use) • Batch operation • Peristaltic pump for spray liquid • Top spray nozzle for spray liquid • Scales • Product container volume 24 L • Batch volume max. 16 L • Batch weight 1-8 kg (depending on product) • Product suction lance from Müller barrel • Conical transition piece for emptying into Müller barrel • Heating register • Star filter for separating product and air flow • Inflatable seals • Product temperature max. 85°C • Explosion-proof container • Max. explosion pressure 10 bar • ATEX Zone 20 inside the mixer (according to conditions in 2010) • Equipment category 1 according to Directive 94/9/EC • Equipment group II, D (dust) • Protection class IP 5x • Max. surface temperature 180°C • Operator terminal MP 277 Touch • Process data acquisition with ...

Features: automatic non-stop delivery with conveyor, non-stop feeder with rods, pull mark left, push mark right, quick clamping frame for tooling, lower stripping station, upper stripping station, two exchange frames for lower stripping station. Without die-cutting plates. Processable materials: min. paper 90g/m², max. solid board 2000g/m², max. corrugated board/ with MasterSet 4/ 2mm, max. sheet size 760x1060mm, min. sheet size/with MasterSet 300x350/ 350x400mm, max. cutting pressure: 2.6MN/ 260t, max. machine speed: 8000 sheets/h, max. feeder pile height without non-stop/ in non-stop operation: 1500/ 1200mm, max. feeder pile weight: 1500kg, max. delivery pile height: 1400mm, max. delivery pile weight: 900/ 1340kg. Operating hours: 1525h. An on-site inspection is possible.

A Ueda Shiko Kikai (Seiko) flatbed die-cutting machine from the 1980s is available. Throughput capacity: approx. 3600 sheets/h, max. sheet length: 1370mm, max. sheet width: 970mm, min. sheet format X/Y: 530mm/300mm, machine dimensions X/Y/Z: approx. 8150mm/2350mm/2050mm, weight: approx. 20000kg. An on-site inspection is possible.

turning diameter: mm turning length: mm control: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A slant bed lathe Traub Sonim is available. Turning diameter over bed/cross slide: 350mm/160mm, turning length: 200mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3200mm/1500mm/1700mm, weight: approx. 3500kg. An on-site inspection is possible.

CONTROLS   CNC controls TRAUB TX 8 BASIC FUNCTIONS   number of spindles: 1   number of x/z slides: 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING   swing diameter (max): 450 mm   turning diameter (max): 350 mm   bar diameter (max): 60 mm   worpiece length max.: 490 mm MAIN SPINDLE   spindle revolutions (max): 4000 /min   c-axis: yes TOOL MAGAZINE   number of positions: 12 ELECTRICAL SPECIFICATIONS   total power consumption: 39 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3150 mm   space requirements -front/back-: 2100 mm   total height: 2100 mm   total weight approx.: 4000 kg ATTA ...

Power: 2,000 W CW Fiber Laser; λ 1,064 nm; upgrade-ready 500–18,000 W Operating parameters: Max. speed 120 m/min; positioning repeatability ±0.02 mm; auto Z-axis height ctrl. (BCS100 V3.0); auto central lubrication Workpiece capacity: 2 exchange tables 3,050 x 1,550 mm each; double-bed system; machine dim. L 7,850 x W 2,350 x H 1,950 mm Supported edges: Steel, stainless steel, Al, Cu, brass & other metals (fiber laser cutting) Edge types: High-precision 2D metal cutting; contour + nesting operations Included equipment: Laser source (Raycus/Max/IPG); Raytools cutting head w/ auto focus; servo motors (Schneider/Yaskawa) – Y: 2x 2,000 W (dual drive), X: 1x 1,000 W, Z: 1x 400 W; planetary reducers Apex (USA); linear guides HIWIN; CypCut control + nesting software; wireless remote; Hanli HL-3000 chiller (laser + head) Compliance: Industrial CNC fiber laser system; CE N/ ...

Manufacturer: WFS YOM: 2001 W090011081RW72071 Serial number S/81283 Car transport approved in documents new air cushions no rust in perfect working condition Dimensions 8700 x 2300 mm weight 5000 kg Unladen 1700 kg Auction-ID: A7-40551-19

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

Without support and contents, including vice Auction-ID: A1-45406-8

Spacing : 2000 mm Permissible diameter on bench : 720 mm Diameter on straggler : 430 mm X stroke : 410 mm Z stroke : 2000 mm Spindle speed : 1 – 1800 rpm Spindle bore : 106 mm Spindle nose : DIN 55027 size 11 Installed power : 28 kW Power supply : 400 V Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-44765-206

Equipped with pointed roof with balcony/canopy 2 meters long; insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-40103-12

Brand : Hedin Lagan AB Type : Forklift heavy duty bed trailer Dimension l : 620 cm Dimension w : 235 cm Dimension h : 95 cm Auction-ID: A1-42013-52

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note color is stone motif as in the first photo) (note furniture not included) (note this model does not have a glass wall on the left side wall photos are for illustration, inside it is exactly the same) (transport dimensions 590x220x248 cm, weight 3500 kg) Auction-ID: A1-40104-45

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-40104-46

With residual content, content may differ from the pictures Auction-ID: A1-45711-18

SS + SC standard bed centre lathe, 1000mm between centres, 220mm swing over bed, with 3 jaw chuck, with 18 spindle speeds from 21 rpm to 1500 rpm Auction-ID: A1-45187-213

Unaudited Auction-ID: A7-45427-219

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Used Fritsch Pulverisette 19 Year of construction 2014 Good condition 220 V 1.5 KW

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

Stock# U2448-3 Used Jehmlich (Germany) model Rekord BT turbo/cage mill designed in carbon steel. Mill has rotor with diameter 320 mm and insert with screen. Insert has outside diameter 380 mm. Top feeding, via carbon steel hopper. Bottom discharge outlet. Mill is belt driven by an explosion-proof electric motor with a power of 18.5 kW, 2930 rpm, 400 V, 50 Hz. Mill is mounted on carbon steel frame.

For Sale Used Corundum Disc Mill / Mustard Mill MK95

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

Milling holders with milling cutters and drills mostly SK40, total 25 parts

Agitator bead mill / bead mill Manufacturer: Netzsch Type LMZ 2 – ZETA system Power 6 kW Weight approx. 280 kg Grinding chamber volume approx. 1.6 litres Regrind volume approx. 0.8 litres Grinding vessel cantilevered attached Agitator speed infinitely adjustable via frequency converter Drive from the motor via belt drive to the drive shaft. Documents available