bed mil used for sale

GeneralUniversal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS Working areaSwing diameter over guide ways500 mmTurning diameter400 mmMax. Turning Length1100 mmBar diameter max.65 mmWork spindle (left)Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmBench speed485 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)8,8 kWDrive power (40% DC)10,5 kWTorque (100% DC)73 NmTorque (40% DC)90 Nmlocking moment850 NmSwivelling range+/- 120 degreeTool magazineType of magazineChain Number of tools60 Max. tool diameter78 mmMax. tool-Ø with free adjacent pockets125 mmFloor space/WeightDimensions (L x W x H)5,19 x 2,11 x 2,47 mWeight approx.11200 KgBASICBasic, consisting of: - Basic ...

General2-axes universal turning center with driven tools and C-axis; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

Milling and boring mill Knuth DRIM 30

General2-axes universal turning center with driven tools and C-axis; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed550 mmSwing diameter over X linear guideways320 mmMax machining diameter300 mmClamping chuck Ø210 mmX travel232,5 mmZ travel410 mmMain drive 1Type of main driveAC Drive power (100% DC)9 kWDrive power (40% DC)11,7 kWSpeed range-4500 rpmTorque (100% DC)108 NmMax. torque (40% DC)140,4 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.5500 rpmPower max. (40% DC)5,44 kWTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemperatur. Mechanical oil mist extractor type AFS 600Mechanical oil ...

Arboga UM 3008 Drilling-Milling Machine -Drive: Gear (gear head) -Motor: 2-stage motor (3-phase / 380 V or 400 V) -Spindle speeds: 8 steps, 105–3,020 rpm -Tool holder: MK 3 (Morse taper 3) -Drilling capacity (steel): approx. 30 mm -Drilling depth (quill stroke): max. 130 mm (adjustable) -Max. distance spindle-table: 600 mm -Cross table dimensions: 585 × 245 mm -Adjustability head: height-adjustable and swivel in angle Dimensions: LxWxH 0.9x0.8x1.9 meters / Weight 600Kg

Milling machine Wagner Ares tc 450

MTRent MTCut V110TH - CNC milling machine - Mount: SK40 - X/Y/Z: 1100 / 610 / 610 mm - Heidenhain CNC control - Incl. milling tools, technical documents and operating instructions - Switch-on time: 21295 h - Spindle time: 6661 h - Year of construction 2015 Technical data Axles: - Travel X: 1100 mm - Travel Y: 610 mm - Travel Z: 610 mm - Rapid traverse X/Y/Z: 32 m/min - Feed: 1 - 12000 mm/min - Positioning accuracy: ± 0.005 mm - Repeatability: ± 0.003 mm - Spindle nose table: 120 - 730 mm - Guides X/Y/Z: Linear 45 / 45 / 45 mm - Machine bed: cast iron Machine table: - Dimensions: 1250 x 610 mm - Max. table load: 900 kg - T-slots in the table: 5 - T-slots width: 18 mm H8 - T-slot spacing: 100 mm Spindle: - Speed: 10000 rpm - Torque (40% ED): 256 Nm - Power (40% ED): 24 kW - Spindle cooling: Oil - Tool holder: SK40 - Tightening bolts: DIN 69871/72  ...

Quadro Comil 196S Cone Mill Stainless milling machine designed for efficient size reduction and particle size control, capacity 3600Kg per hour, 11Kw motor, on stainless mobile stand, comes with four different size cone meshs, 3Ph

GILDEMEISTER - CTX 310 V3 Stock number 1039-9126 CNC Turning and Milling Center Manufacturer: GILDEMEISTER Type CTX 310 V3 Year of construction 2003 Control 840 D Siemens Country of origin Italy Additional information: - Incl. 2x reducing tubes Technical details: Turning diameter 210 mm Turning length 580 mm Control 840 D Siemens Center height 190 mm Turning diameter over bed 330 mm Turning diameter above the face slide 260 mm Main spindle: Speed range - main spindle max. 4,000 rpm/-1 Drive power - main spindle 10 / 7.5 kW Max. torque 115 / 86 Nm Spindle bore 68.5 mm Usable rod diameter 51 mm C - Axis 0.001 ° Travels: Travel - x 185 mm Travel - z 455 mm Tool turret: Number of tool positions 12 pos. Tool holder VDI 30 Driven tool stations: 6 pos. Tailstock: Tailstock displacement 400 mm Suction pressure max. 4,000 N Feeds: Rapid traver ...

General Description Horizontal milling machine, exported by Stankoimport . Designed for milling, slotting and general machining operations. The machine is equipped with a horizontal arbor spindle and supplied with installed milling tooling and a table-mounted clamping fixture. Technical Details Machine type: Horizontal milling machine Exporter: Stankoimport Horizontal arbor spindle T-slotted work table Multiple milling cutters mounted on the arbor Table-mounted clamping fixture included Manual X/Y/Z table feeds Mechanical feed gearbox with feed and spindle speed selectors Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and clamping fixture installed. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-24

General Description Universal toolroom milling machine manufactured by AVIA , model FOP . Designed for precision milling, drilling, boring and toolroom machining. The machine is equipped with both vertical and horizontal spindle configurations, providing high versatility for a wide range of machining operations. Technical Details Manufacturer: AVIA Model: FOP Machine type: Universal toolroom milling machine Vertical spindle with quill Horizontal spindle with arbor support Swivelling universal milling head Mechanical feed gearbox Separate electrical control pendant Condition Used industrial condition. The machine appears complete with vertical spindle, horizontal spindle support, universal milling head, mechanical feed gearbox and separate electrical control pendant. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-2 ...

General Description Horizontal milling machine designed for milling, slotting, gear cutting and general machining operations. The machine is equipped with a horizontal spindle and arbor carrying multiple slitting saws and side-and-face milling cutters, making it suitable for production and toolroom applications. Technical Details Machine type: Horizontal milling machine Horizontal spindle with arbor installed Multiple slitting saws and side-and-face cutters mounted on the arbor T-slotted work table Manual X/Y/Z table feeds Mechanical feed gearbox Feed and spindle speed selector dials Condition Used industrial condition. The machine appears complete with horizontal spindle, arbor, milling cutters, T-slotted table and feed gearbox. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-23

Technical details Manufacturer: ZPS Type: Horizontal milling machine Configuration: - Horizontal spindle - Gear-driven spindle head - T-slotted worktable - Longitudinal, cross and vertical manual feeds - Automatic table feed system - Rapid traverse - Feed gearbox with multiple speeds - Horizontal arbor support mounting - Mechanical control levers - Electrical control cabinet Application: - Flat surface machining - Slot milling - Keyway machining - General metalworking - Workshop and maintenance operations Construction: - Heavy-duty cast-iron machine frame - Conventional manual operation - Industrial gearbox drive Dimensions: - Length: Approx. 2400 mm - Width: Approx. 2200 mm - Height: Approx. 1900 mm Weight: Approx. 3500 kg Condition: Used Observed condition: - Machine appears mechanically complete - Table appears straight - Spindle nose and feed gearbox ...

General Description Universal toolroom milling machine manufactured by AVIA , model FOP . Designed for precision milling, drilling, boring and general toolroom machining. The machine features both horizontal and vertical spindle configurations for versatile machining operations. Technical Details Manufacturer: AVIA Model: FOP Machine type: Universal toolroom milling machine Horizontal spindle with arbor mounting Vertical swivelling milling head Power-feed work table Mechanical gearbox Universal milling configuration Separate electrical control cabinet Condition Used industrial condition. The machine appears complete with horizontal spindle, swivelling vertical milling head, power-feed table, mechanical gearbox and separate electrical cabinet. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-28

General Description Heavy-duty horizontal spindle rotary table surface grinder of Soviet manufacture, exported by Stankoimport, Moscow, USSR . Designed for precision grinding of flat surfaces on large workpieces. The machine is equipped with two rotary work tables and a horizontal grinding spindle, making it suitable for grinding rings, discs and other circular components. Technical Details Manufacturer: Unknown (exported by Stankoimport, USSR) Model: Not identified Machine type: Horizontal spindle rotary table surface grinder Year: Not confirmed Origin: USSR Two independent rotary work tables Horizontal grinding spindle Manual longitudinal table movement Mechanical/manual cross feed Manual feed controls Coolant system Hydraulic/mechanical feed system Condition Used industrial condition. The machine appears mechanically complete with both rotary tables, grinding spin ...

Used and unchecked; viewing desired Auction-ID: A1-50737-45

Used and unchecked; viewing desired Auction-ID: A1-50737-70

General Description Universal vertical tool milling machine manufactured by the Kirov Machine Tool Plant, Odessa (USSR) . Designed for precision milling, drilling, slotting and general toolroom machining. The machine is equipped with a geared vertical spindle, T-slot work table and heavy-duty machine vise. Technical Details Manufacturer: Kirov Machine Tool Plant, Odessa (USSR) Machine type: Universal vertical tool milling machine Year: Not confirmed Spindle speeds: 145 / 290 / 580 / 725 / 1,450 / 2,900 rpm Vertical spindle head T-slot machine table Heavy-duty machine vise included Longitudinal power feed Separate electrical cabinet Machine work light Condition Fair to good used condition. The machine appears mechanically complete with spindle gearbox, T-slot table, heavy-duty vise and electrical cabinet installed. Cosmetic paint wear, industrial staining and light surf ...

General Description Universal horizontal milling machine designed for milling, drilling, slotting and general machining operations. The machine is equipped with a horizontal spindle fitted with a vertical milling head, providing flexibility for both horizontal and vertical machining applications. Technical Details Machine type: Universal horizontal milling machine Horizontal spindle with mounted vertical head Table length: Approx. 1,100 mm T-slotted work table Mechanical hand feeds Powered longitudinal table feed Multi-speed gearbox Heavy cast-iron construction Condition Used industrial condition. The machine appears complete with horizontal spindle, vertical milling head, T-slotted table and feed mechanisms. Operational status, spindle condition and machining accuracy have not been tested. Auction-ID: A7-50745-19

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38

Copy milling machine with a template-equipped workpiece table and overhead pneumatic clamping cylinder. Vertical cutter spindle with extraction hood, electric motor, belt-drive guard and pneumatic cylinder assembly. Equipped with extraction ducts and hoses, electrical controls and emergency stop button. Auction-ID: A1-50699-42

Copy milling machine with a circular rotary worktable, profiling template and overhead clamping cylinder. Equipped with a vertical milling spindle, electric motor, belt drive with protective guard, cutter extraction hood and flexible extraction hose. Front control panel with push buttons and selector switch. Serial number: 54286. Machine number: 55394. Manufacturer location: Hannover-Hainholz, Germany. Auction-ID: A1-50699-43

Voltage: 220 V, Frequency: 50/60 Hz, Motor power: 0,75 kW, Motor speed: 2850 rpm, Max. machinable profile height: 90 mm, Max. machinable profile width: 120 mm, Arbor diameter: Ø30 mm, Max. blade width: Ø140 mm. Auction-ID: A1-50595-8

Horizontal boring and milling machine WMW BMF 150, working travels X 7,300 mm, Y 3,200 mm, Z 1,000 mm. Year: retrofit 2015 Auction-ID: A1-50595-55

Wood milling machine equipped with two disc-type cutter heads with replaceable cutting inserts, mounted on a common horizontal shaft with spacer sleeves. Belt-driven shaft powered by a rear-mounted electric motor. Vertically guided worktable with pneumatic lifting cylinder, overhead pneumatic clamping assembly and foot pedal. Front and rear extraction hoods with flexible hoses, side belt-drive guard and emergency stop button. Auction-ID: A1-50699-41

CONTROLS   CNC controls SIEMENS BASIC FUNCTIONS   number of spindles: 4   number of turrets: 2   live positions: yes   number of c-axes: 4 WORKING RANGE TURNING   turning diameter (max): 100 mm   bar diameter (max): 20 mm MAIN SPINDLE   spindle revolutions (max): 5000 /min COUNTER SPINDLE   spindle revolutions (max): 5000 /min TOOL MAGAZINE   number of positions: 48 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 9600 mm   space requirements -front/back-: 1500 mm   total height: 2200 mm   total weight approx.: 2600 kg ATTACHMENTS (TURNING)   bar magazine: optional   - bar length (max): 3000 mm   chip conveyor: yes   coolant unit: yes   hydraulic system: yes Features: - various tool holders - various collets in every millimeter increment - bar feeder (dual channe ...

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device and machine light

with 2-axis digital display, Fabr. HEIDENHAIN, with angle milling head, 2 dividing heads, additional clamping table, counter holder, 3-jaw chuck, various interchangeable wheels, machine light and steel transport trolley

with 3-axis digital display, Fabr. HEIDENHAIN, with coolant device, machine light, angle milling head and counter holder

Auction-ID: A1-50867-45

Auction-ID: A1-50867-46

Can be dismantled by the customer up to extraction. Wooden chest of drawers containing milling heads not included. Auction-ID: A1-50226-5

Consisting of approximately 18 different milling heads, including CMT, LEITZ, FREZITE, in various sizes and designs, complete with various spare blades, lying in wooden chest of drawers 100 x 80 x 150cm Auction-ID: A1-50226-10

This 6-axis EMCO Hyperturn 665MC Plus turn-mill centre was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on both main and counter spindles, it offers a spindle speed up to 5000 min-1 for the main and 7000 min-1 for the counter spindle. Includes a 24-position tool magazine and SINUMERIK 840D control. If you are looking to get high quality turning and milling capabilities consider the EMCO Hyperturn 665MC Plus machine we have for sale. Contact us for more information about this machine.

Numerical Control: FANUC 18i-T Number of Axes: 5 (Twin-Spindle Configuration) Main Spindle: Present Sub-Spindle: Turrets: 2 Turrets with Motorized Tools: Present Configuration: Combined Turning and Milling Weight (kg): Approx. 9000 Year & Manufacturer: 2004 – HARDINGE Auction-ID: A1-50714-4017

Year of manufacture: 1986 Machine no.: 16401 Longitudinal stroke (X): 800 mm Cross stroke (Y): 300 mm Vertical stroke (Z): 520 mm Table dimensions: 1200 x 280 mm Weight: 2,150 kg Auction-ID: A1-50714-4080

Table dimensions: 1067 x 229 mm (42 x 9 inches) T-slots: 3 x 16 mm slots (63.5 mm o.c.) Longitudinal stroke (X): 762 mm Cross stroke (Y): 381 mm Vertical console travel (Z): 406 mm Spindle taper: ISO 40 (or R-8 depending on stock options) Spindle speeds: continuously variable from 60 to 4,250 rpm Duct travel: 127 mm, automatic descents 0.04 / 0.08 / 0.15 mm/rpm Spindle motor: 3 hp (2.2 kW) Weight: approx. 1,450 kg Auction-ID: A1-50714-4065

Control: Grundig Numerik NC Pilot Table dimensions: 800x360 mm The machines are generally offered without documentation. If documents are available, they are attached to the respective machine. Auction-ID: A7-50868-3

Serial number: 22760 Longitudinal stroke (X): 800 mm Cross stroke (Y): 550 mm Vertical stroke (Z): 500 mm Spindle taper: ISO 40 Spindle speeds: up to 4,000 rpm (or 6,300 rpm depending on transmission/drive versions) Motor power: 7.5 kW Operating voltage: 380 V three-phase, 50/60 Hz Auction-ID: A1-50714-4201

Longitudinal Stroke (X): 850 mm Transverse Stroke (Y): 275 mm Vertical Stroke (Z): 370 mm Auction-ID: A1-50714-4203

Manufacturer: LAGUN Year: 1991 Type: CNC universal milling machine Numerical control: Heidenhain TNC 355 Axes: 3 axes (X, Y, Z) Strokes: X 1100 mm / Y 600 mm / Z 600 mm Table: 1200 x 550 mm Spindle: 50 to 3000 rpm – motor power 20 kW Equipment: HURON universal head type, coolant system Remarks: Robust CNC universal milling machine for heavy and versatile milling. Auction-ID: A1-50714-4069

Manufacturer: CME Year: 1991 Type: CNC Universal Milling Machine Numerical Control: Heidenhain TNC 124 Axes: 3 Axes (X, Y, Z) Strokes: X 1100 mm / Y 700 mm / Z 500 mm Table: 1400 x 450 mm Spindle: ISO / SK 40 – 40 to 1800 rpm – motor power 10.6 kW Dimensions: 2400 x 2150 x 2100 mm Weight: approx. 3800 kg Notes: Robust universal CNC milling machine made in Spain. Auction-ID: A1-50714-4076

x-travel: 730 mm y-travel: 730 mm z-travel: 850 mm control: MSX 701 IV MAPPS 4 Main spindle:: max. spindle speed: 14.000 min/-1 power capacity - milling spindle: 22 / 18,5 kW tool taper: HSK A-63 distance ground floor - table top edge: 1.200 mm distance Spindlenose and center of table: 100 - 950 mm pallet changer:: numbers of pallets: 2 size of pallet: 500 x 500 mm max. workpiece weight: 500 kg max. workpiecediameter: 800 mm max. workpiece height: 1.000 mm change time of pallets: 7 sec Indexing-time: 1,57 sec B-axis (table): 0,001 ° Tool-Presetter:: number of toolpositions: 120 pos. tool taper: HSK A-63 max. tool diameter: 70 mm max. tool-dia with free toolbox: 140 mm max. tool length: 500 mm max. tool weight: 12 kg feeds:: rapid traverse: 50 m/min feed speeds: max. 50.000 mm/min Tipp feed: 0 - 1.260 mm/min total power requirement: 51 kVA weight of the machine ca.: 12 t dimensions o ...

Year of manufacture: 1999 Serial number: 1137 Hour meter: 4,468 h Numerical control: Heidenhain TNC 310 (3 axes controlled) Longitudinal stroke (X): 1,000 mm Transverse stroke (Y): 450 mm Vertical stroke (Z): 600 mm Table dimensions: 1,000 x 450 mm Permissible load on table: 500 kg Spindle taper: ISO 40 Rotational speed: up to 4,000 rpm (depending on variation ranges) Spindle motor power: 6.6 / 9.3 kW Overall dimensions (L x W x H): 2,300 x 2,300 x 2,400 mm Total weight: approx. 3,200 to 3,500 kg Disassembly and loading costs: €300 Auction-ID: A1-50714-4202

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI Slimline Fanuc i Series Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,3 x 2,44 x 1,95) mWeight approx.6500 KgPre-setting PackagePre-setting package: Option includes: - tool pre-setting probe MARPOSS - chip conveyor with right side discharge instead of chip tank - s ...

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm turning speeds: 50- 4000 U/min total power requirement: 17,5 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,0 x 2,7 x 2 m Description: - excellent condition - Heidenhain ND780 digital readout - infinitely variable speed control - infinitely variable feed drives - hydraulic tool clamping - mechanical handwheels - electronic handwheel - drilling quill - horizontal milling spindle - coolant system X-travel 620 mm Y-travel 420 mm Z-travel 400 mm Spindle taper ISO 40 DIN 69871A Spindle speeds 50 - 4000 rpm Table size 800 x 400 mm Table load 400 kg Feed rates infinitely variable, max. 2000 mm/min Rapid traverse 5 / 4 m/min Drive power - milling spindle (S1) 10.5 kW Quill stroke 80 mm Coolant system Operating voltage 400 V Total power requirement 17.5 kW Machine weight approx. 1.9 t Space requirement approx. 2.00 x 2.76 x  ...

Offer a WMW 315/8 milling machine here. One of the best from Auerbach before the turnaround. Is in a good, fully functional condition. An identical machine is available if you are interested. (complete except for pulley and belt) X Y Z 500/400/400 Spindles Sk40 Year of construction 1988 Feeds infinitely variable, rapid traverse both have West German export control cabinets Connected load 8.5kw electr. Tool clamping in both axes Coolant Setup Speed 56-2800rpm Weight 1.9t per piece All circuit diagrams documentation included

Fitzmill D6 Hammermill Stainless frame and contact parts, 16 swing knife blades powered by a 5Kw motor, 3Ph