bed mil used for sale

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Seital SE15X Milk Separator Capacity 3.000 lt/h Comes with tools kit and instructions book

Seital SE20X Milk & Whey Separator Capacity 5.000 lt/h Comes with tools kit and instructions book

x-travel: 640 mm y-travel: 200 mm z-travel: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Milko Type: 12 Table length: 1.000 mm Table width: 220 mm X: 640 mm Y: 200 mm Z: 400 mm Spindle taper: ISO 40 Maximum speed: 1.700 RPM Digital readout: Fagor Automatic feeding on X Machine is equipped with Huron head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Miller TR 104 2 colors with perfector. color Control panel(Pult), 75 mil, roller and cylinder are without damage

Millitec PCM V100 Panini press Serial: 4671 2011, stainless, variable speed, belt dimensions 1850mm x 80mm, height adjustable hold down belt, 1Ph

diamond core drilling machine -Drill stand -vacuum pump -Core drill: Ø 202 mm (picture) -Machine dimensions: 500 x 370 x H1070 mm -Weight: 53 kg

FERROMATIK MILACRON ELEKTRA 155 injection moulding machine manufactured in 2003 in Germany after a general overhaul at a total value of approximately 14290 EUR. During the 2024 overhaul, components such as the clamping system drive screw, belt pulley, drive belt, lubrication system sensor, clamping pins, pan and drive belts in the plasticising unit were replaced. In addition, both motors in the plastification unit were refurbished and a periodic column tension check was carried out with the GEFRAN strain gauge system. The FERROMATIK MILACRON EE155 injection moulding machine is the perfect choice for the mass production of plastic parts of different colours, shapes and sizes by injection moulding. The machine’s high-performance components significantly enhance any, even the most intensive, machining process. These include an electric drive, which, compared to a hydraulic drive, offer ...

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years

Flow monitor -Volt: 24 V. -Dimensions: 105/105/H265 mm -Weight: 1 kg

SEITAL SE15 X MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATOR CAPACITY: 3.200 LT/H FOR MILK SKIMMING 4.500 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK.

SEITAL SE30 MILK & WHEY SEPARATOR APPLICATION: CREAM SEPARATION CAPACITY: 7.000 LT/H FOR MILK SKIMMING 10.000 LT/H FOR WHEY SKIMMING MACHINE COMES WITH TOOLS AND INSTRUCTIONS BOOK

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg

Qty. 1 Second-hand brew house Mfc.: Spomax, Zumec, Alfa Laval, Zieman, Bartec & others Built: 1996 – 2015 Capacity: 400 HL x 12 brews / Day

Stainless steel platform movable for bread roll presses / dough dividing machines suitable for all common bread roll presses Solid construction loadable with 1 t Easy locking Stainless steel for optimal cleaning Dimensions: 735 x 640 x 170 mm, WxDxH NEW More TOP bakery machines and equipment in stock!

for all light/dark leftovers etc. "the bio-universal shredder" Model: BG2 Stainless steel Capacity hrs./ 600 kg dry Sieve 5 mm (included) Connection 400V, 5.5 kW, 32A-CEE plug Dimensions: 720 x 690 x 1580 mm, WxDxH Ejection Height 470 New device 12 months warranty More TOP bakery machines in stock!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Milwaukee, double-acting hydraulic cylinder stroke 600 mm -Type: H-73 -Piston rod: Ø 16 mm -Holes: Ø 25 mm / Ø 18 mm -Dimensions: 885/220/H180 mm -Weight: 16.3 kg

WESTFALIA MSB 60-01-076 MILK SEPARATOR CENTRIFUGE USED FOR MILK SKIMMING, WHEY SKIMMING, CREAM SEPARATION, FAT SEPARATION FEED CAPACITY: 7.000 LT/H MACHINE COMES WITH TOOLS KIT AND SOME SPARE PARTS INSTRUCTIONS BOOKS ARE AVAILABLE 2 PCS AVAILABLE IN STOCK !

Pasteuriser for Milk 12,000 L/h Make : Fisher Model: E43 CFG Y.o.m : 2009 Capacity : 12,000 Litres Outlets : Separator & Homogeniser Thermal Circle : 4-45-65-75-4 Skid Mounted Condition : Very well maintained

FBF Homogeniser 12,000 L/h 180 bar Make : FBF Model :075 Capacity : 12,000 L/H Bar Pressure : 180 bar Motor :76.5 kw Y.o.m : 2008 Weight : 2850 kg Condition : very good condition

Key data: 18 t

Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm

Key data: 510 mm, 510 mm, 510 mm

Inv. Num. : 7409 Type: ARROW 500 Producer: CINCINNATI MILACRON Created: 1996 Parameters: Control system: ACRAMATIC A 2100 Number of stacking positions: 21 Work table length: 700 mm Work table width: 520 mm Maximum table load (uniform): 350 kg Maximum vertical spindle speed: 6000 1/min X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Cone: CAT 40 Machine height: 2650 mm Machine length: 2700 mm Machine width: 2000 mm Machine weight: 3050 kg Equipment: Tool Holder

Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head -Diameter: Ø 100 mm -Number of teeth: 6 -Indexable inserts: Carbide -Recording: SK50 -Weight: 4.5 kg

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

Simple proofer / heating oven Model: Fermentation mobile 4060 longitudinal Thermal double glass door with soft closed LED easy control with timer Temperature adjustable from 30 to 90°C Humidity adjustable from 60 to 95% Stainless steel, convection Capacity: 20 trays 400x600 mm lengthwise LED Lighting Connection 230 V, 2.7 kW New device, mobile Weight: 166 kg 3/4 inch water connection Dimensions: 650 x 875 x 2020 mm, WxDxH with 12 months warranty Option: 60x40 transverse rack Brita Filter Many more TOP bakery machines in stock!

Croissant Wrapper Wrapping Machine Model: Rondi Croissantroller Stainless steel Tabletop appliance for the efficient production of croissants Easy to use for unfilled croissants Output up to 700 pieces/hour Connection 400V, 200 Watt, 16A-CEE plug Dimensions: 300 x 450 x 270 mm, DxWxH NEW Machine with 24 months warranty + service package Option: Driving table Maintenance contract We have many more bakery machines in stock!

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040 Catalog Number: ZAFS51040 Provides up to 800 L/day of clinical laboratory reagent water. Dispensing Flow 15 MΩ-cm, at 25 °C H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches) Tank volume: 90 L, integrated Total Oxidizable Carbon Residue (TOC):

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

Used automatic butter packing machine MILCOM PA1. Technical parameters: capacity 60-110 pcs/min packaging format 200g cube dimensions 100x75x29mm centering unit – photocell stainless steel butter tank, with stainless steel screw and plastic cover electric board on the machine SIEMENS PLC electronic unit with visualization frequency converter for continuous speed control

Key data: 700 mm, 420 mm, 380 mm

General Manufacturer: DMG MORI Type: Milltap 700 Year of Make: 2016 Control: Siemens 840D SL Travel: X 700 mm Y 420 mm Z 380 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 NC swivel rotary table Table load: max. 100 kg Swivel range A: -100/+120° Rotation range C: 360° Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tool Changer Conveyor IKZ Internal tool cooling with high-pressure system Preparation for automation

MILLUTENSIL spotting press BV30E-RG New machine in stock for sale..

Millutensil BV 30 ERGYear of manuf. : 2022 Control : Siemens Simantic HMI ____________Description:In Generel:Table dimensions:1,500 x 1,000 mmMax. clamping force:500 kNMax. load capacity top plate:2,500 kgMax. load capacity under plate:7,000 kgRG version:plate can be pulled out and tilted:

With Lehmann rotary table and High pressure coolant unit X travel 700 mm Y travel 420 mm Z travel 380 mm Spindle speed 10.000 rpm Controller SIEMENS 840D

This single stage absorption chiller is on perfect condition ready to start working. It runs with hot water and use Advaguar as working fluid. Is available on two configurations, with the container where is installed and without it. Power:1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C YOM: 2008 Frequency: 50Hz Voltage:400 V Working Fluid: Advaguard

Millutensil spotting press BV25/PM - Output force adjustable (with max. pressure): 100 - 800 kgf - Ejector stroke max.: 120 mm - Hydraulic pressure adjustable from 5 - 100 bar - Width: 150 cm - Depth: 150 cm - Height: 200 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

Used machine in good condition. Available for immediate delivery. - Power source : 70 kVA - Control: SINUMERIK 880M - Driven tool speed: 6.000 rpm

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindl ...

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - / Contact us at -

Very nice condition Ryobi 784E Ryobimatic Damp PCS-F console 32 mil imps Semi Autoplate all Washers Straight machine Stream feeder 600mm x 788m in germany Production

Process Vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, WGR MR 125 magnetic agitator on the bottom, agitator flange on the underbody (drive missing) Product space: vacuum and pressure resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition

50,000 litre milk tank/ agitator tank made of V2A Cat No.: 25-0150EUBA Condition: Used Volume 50000 L Material V2A (AISI 304) 1.4301 Total height 7200 mm Diameter 3300 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Manufacturer: Holvrieka Built in 1972 Topsoil: Inclined cone base 2 crane eyes Level measurement sensor Ventilators Tank cylinder: Manhole 500 x 400 mm Agitator mixer - side with propeller Subsoil: Flat bottom with 2% slope Outlet bag DN 100 Sensor for level measurement

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height