bed mil used for sale

A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible.

Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible.

Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible.

Voltage: 380V, frequency: 50Hz, spindle power: 10hp continuous, 15hp for 30 minutes, amperage of largest motor: 40/60A, KA. DC gradation: 10, control: Mazak MAZATROL T-1, weight: 4.5t, with programming manual. An inspection on site is possible.

A CNC slant bed lathe Focus is offered. Swing diameter over bed: 600mm, max. turning diameter: 330mm, max. turning length: 669mm, spindle bore: 88mm, spindle speed: 3400rpm, travel X/Z: 260mm/762mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, tool stations: 12, tool holder: VDI40, quill diameter: 85mm, tailstock taper: MK4, controls: Siemens. Weight: approx. 5700kg, machine dimensions: X/Y/Z: approx. 3600mm/1800mm/1800mm. Inspection possible by appointment.

turning diameter: 850 mm turning length: 2000 mm turning diameter over slide rest: 690 mm control: Siemens type: 840 C Cooling through the spindle: 23 bar centre height: 450 mm spindle diameter in front bearing: 200 mm spindle hollow: 128 mm power capacity: 60 kW turning speeds: 7-1800 U/min Torque: 7908 Nm workpiece weight: 4000 kg tailstock quill diameter: 160 mm tailstock quill taper MT: 5 3 jaw chuck Forckrath: 600 mm Tool changer: 60 work piece power: 30 kW turning speeds: 56-3000 U/min total power requirement: kW weight of the machine ca.: 18 t dimensions of the machine ca.: 6,3x2,4x3,3 m The machine has been completely overhauled. Capto C6 milling chuck Double prism lathe chuck The machine has many optional accessories that can be purchased separately. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms  ...

HARDINGE CONQUEST T42SP ist eine CNC-Drehmaschine mit Schrägbett, für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Spitzenweite 350 mm, DrehØ über Bett 269 mm, drehbar 231 mm, Spindelbohrung 42 mm; Wege Z 353 mm, X 135 mm; Revolver 12 Pos. Drehz. 50–5000 t/min; Motor 7,5 kW. Zubehör: 3-Backenfutter Ø150, hydraul. Reitstock, Messarm Renishaw. Ermöglicht enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik Technische Daten ohne Gewähr

SOMAB TRANSMAB 200 ist eine CNC Drehmaschine mit Schrägbett für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Ø über Bett 260 mm, Spindelbohrung 35 mm, Z 300 mm, X 125 mm, Revolver 8 Pos., Schaft 16 mm, Reitstockhub 80 mm (Ø52). Technik: A2-4", Innenkegel 20 mm, 200–5000 U/min (stufenlos), 4 kW Motor, 3x400 V, Gewicht ~2500 kg, 1900×1400×1980 mm. Zubehör: Spannzangensatz, Lampe, Reitstock, Werkzeugschr., RS232, Fußpedal. Für enge Toleranzen in Automotive, Luftfahrt, MedTech. Technische Daten ohne Gewähr

SOMAB TRANSMAB 200 is a CNC Drehmaschine mit Schrägbett, für präzise Bearbeitung, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Drehdurchmesser 260 mm, Spindelbohrung 35 mm; Wege Z 300 mm, X 125 mm; DUPLOMATIC Revolver 8 Pos., Werkzeugschaft Ø16 mm. Daten: 200–5000 min-¹ stufenlos, Spindelmotor 4 kW, Aufnahme A2 4", Innenkonus 20 mm; Reitstock Morse 3, Hub 80 mm, Ø52 mm; 3×400 V 50 Hz; Gewicht ~2500 kg; L1900×B1400×H1980 mm. Zubehör: Spannzangen F38, Beleuchtung, Reitstock, Werkzeugschrank, RS232, Fußpedal, Werkzeughalter. Für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr

SOMAB TRANSMAB 200 ist eine CNC Drehmaschine mit Schrägbett, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Drehdurchmesser über dem Bett 260 mm, Spindelbohrung 35 mm; Verfahrwege Z 300 mm, X 125 mm. Revolverschlitten DUPLOMATIC, 8 Positionen, 8 feste Werkzeuge, Werkzeugschaft 16 mm, Innenkegeldurchmesser 20 mm. Spindeldrehzahlen stufenlos 200–5000 U/min, Spindelmotor 4 kW, Spindelaufnahme A2 4", Reitstock Morse 3 mit Pinolenhub 80 mm und Durchmesser 52 mm, Druck 1200 N; Anschluss 3x400 V 50 Hz; Gewicht ca. 2500 kg; Abmessungen L1900×B1400×H1980 mm. Ausstattung: Spannzangenaufnahme F38, Satz Spannzangen, Beleuchtung, Werkzeugschrank, RS232-Schnittstelle, Fußpedal, Satz Werkzeughalter. Ermöglicht Bearbeitungen mit engen Toleranzen; typische Branchen: Automobil, Luftfahrt, Medizintechnik, Werkzeugbau, Uhrmacherei. Technische Daten ohne Gewähr

consisting of 39 pieces , partly shrunk, partly normal incl. tool carrier system Reference: Alesco - Lot 46 Auction-ID: A7-49882-24

Equipped with insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-47444-49

Bed table with steel frame and high-density panel. Base with 4 removable castors Ø 50 mm (2.5\") including 2 with brake. Height (from 72 to 110 cm) adjustable and angle. Top: 41 x 61 cm. Delivered as a kit. Packaging: 65 x 7 x 67 cm Multilingual instructions: GB, FR, IT, ES, PT, DE, RO, SI. Auction-ID: A1-50069-248

Reference: 1136111 Auction-ID: A1-50069-39

Content consisting of disc cutters, saw blades, milling cutters, countersinks Reference: Wahl - Lot 58 Auction-ID: A7-49882-302

Contents consisting of a cutter head . Twist drills, various keys, parallel supports, taps, twist drills, clamping devices Attention: without the clamping system shown in the photos Reference: Option - Lot 63 Auction-ID: A7-49882-304

Content consisting of various milling cutters, radius milling cutters and clamping devices Reference: Option - Lot 61 Auction-ID: A7-49882-303

• Made of plastic • White • Washable 94°C Auction-ID: A1-50069-31

Content consisting of various milling cutters, inserts in different sizes, reamers, twist drills Attention: all items stored on the workbench are not included in the scope of delivery! Reference: Choice - Lot 68 Auction-ID: A7-49882-305

MOL 3-axle tipper semi-trailer, put into service on 03/06/2003. Features: Brand: MOL Type: Dump Semi-Trailer Configuration: 3 axles GVW: 39,000 kg Tare: 6,000 kg Payload: 33,000 kg Overall length: 10,040 mm Wheelbase: 6,330 mm Rear overhang: 2,460 mm Kingpin / rear distance: 8,875 mm Kingpin load: 15,000 kg Air suspension. Air braking with WABCO brake corrector. Tipper with side panels (longitudinal or lateral tilting). Auction-ID: A3-46162-35841

Equipped with pointed roof with balcony/canopy 2 meters long; insulated walls and roof; 2 bedrooms; living room with corner kitchen; bathroom with shower, toilet and sink; each room equipped with lighting and sockets 230V; meter cupboard; PVC floor; aluminum windows and doors; lockable; water, electricity and drainage can be easily connected is prepared; unused and ready for transport (note furniture not included) (transport dimensions 590x220x248 cm, weight 3100 kg) Auction-ID: A1-47445-28

Traceable back to Vin: WV4ZZZT14PS031968 Part number of the bumpers: 2HJ807417DT Dismantled before the car has been driven. Auction-ID: A1-47417-268

Features: Pall iCELLis Nano System with mPath Control Tower, Year 2021 Auction-ID: A1-50093-56

Equipped with: Unique color, electrically adjustable, BJX toppers, 2x Hardness Firm (sturdy), Bed motors, headboard Auction-ID: A1-47446-502

BDF swap bed / swap body C30 Open version with foldable side walls 4 support legs, JOST type SS 86 SK/TSK Marking: DIN EN 284, DB 629 DB designation: 01896/23, DB no. 1094772 Identification number: 51 919 121049 Steel structure, painted blue Used condition with signs of wear and tear due to age and use Paint chips, scratches and surface corrosion in places Loading floor partially dismantled or open/missing floor areas visible Side walls and fittings with signs of wear Manufacturer of the swap body not clearly visible Year of manufacture, dead weight and payload not known or not readable Sale in existing condition according to photos Auction-ID: A1-49588-10091

Important and outstanding design features of the RaptorX-SL with steel substructure in gantry design RaptorX-SL1200/S15 The range of applications of a RaptorX-SL CNC Fraesmaschine is variable due to the adjustable working area (through-lasshoehe under Bruecke: 150mm, 300mm or 400mm ) and the traversing height of 300mm in the Z-axis (at no extra charge) extremely large. Special size up to 17,500 mm (on one piece) x 3000 mm x 600 mm are feasible ! If you are interested please ask ! This way you are able to process plate materials with the greatest stability of the Z-axis just as accurately as 200mm high 3D-Koerper. Use the system as a plasma cutting system or waterjet cutting system, appropriate extensions are available. In the middle range of the machine (between the foot tubes) you can even process parts up to a height of 850mm (beam rail etc. ) or 3D body up to about 400mm h ...

Important and outstanding design features of the RaptorX-SL with steel substructure / The range of applications of a RaptorX-SL CNC Machine is variable due to the high-adjustable working area (read-through under bridge variable : 150mm, 300mm or 400mm ) and the 300mm travel height in the Z-axis (no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-parts. Use the system as a plasma cutting system or water jet cutting system, corresponding extensions are available. In the middle range of the machine (between the foottubes ) you can even process parts up to a height of 850mm (beam shrare etc. ) or 3D body up to about 400mm height ( at 400mm long Fraeser ) ...

1 gebr. Corundum disc mill type T4, in vertical version Technical data: Make: KORUMA Type: T4 Drive power: 18.5 KW three-phase motor (completely new drive motor) Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 54 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: shaft sealing ring Side seals: EPDM Connections: Suction side DN 80 DIN 11851 Capacity: 300-1800kg/h Grinding discs: 240mm Gehäuse_ with double sheath for heating/cooling

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. echnische data: External dimensions LxWxH: 1650x1440x1950 mm Weight: approx. 650 kg Clamping surface XxY: 930x630 mm Travel XxYxZ: 900x600x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reverse play: appr ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Work facilitation through basic equipment The basic equipment includes, for example, an ergonomic control panel, which contains the stepper motor control and an industrial PC with touch function. Software (CAD/CAM, control software, operating system Win 10 Pro) are already pre-installed. Thus, the CNC milling machine can be operated conveniently and conveniently. A multi-zone vacuum table ensures a comfortable, fast clamping of workpieces and a strong hold during milling. Furthermore, the machine is equipped with a manual central lubrication, which makes it easier for you to grease and increases the service life of the CNC milling machine. Various applications The most diverse materials can be processed on our T-Rex, whether plastic, wood, metal or stone, nothing is impossible. Whether engraving, milling, cutting, drilling, dosing, gluing, etc., no wishes remain unfulfille ...

Usable for the: Milling and engraving labeling, marking Drilling, cutting Dosing and much more. (Applications require optional accessories) inclusive: Design software ConstruCAM 3D Control software KinetiC-NC incl. CAM software Estlcam Multi-zone vacuum table with recessed T-nuts sliding Control panel including step control manual central lubrication The offer here is a CNC milling machine with the above-mentioned accessories (without further ado possibly shown on the photos accessories). For operation, a milling motor is also required, which can optionally be purchased from us. Technical specifications: External dimensions LxWxH: 1970x2150x1950 mm Weight: approx. 950 kg Clamping surface XxY: 1230x1320 mm Travel XxYxZ: 1200x1300x200 mm (optional 300/400 mm in Z-axis) Width linear guides X,Y,Z: 20 mm Repeatability: 0.01 mm Reve ...

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

For sale is the four-roller grist mill of the Seeger brand, which can be seen in the pictures The mill was in use in a brewery until the end and is functional. The bearing has already been overhauled on the predecessor. Specifications: Manufacturer: Seeger Model: VSM 350 Capacity: 750 kg/h Measurements: see last picture

For Sale Used Corundum Disc Mill / Mustard Mill MK95

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 33064 Year of construction approx. 1960 Overhauled in 2012Travel distances X: 300 mm Y: 150 mm Z: 330 mmTable size 600 x 210 mmSpindle holder MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 1.1 and 1.4 kWNerg connection 380 volts, 50 Hz- Feed in the X and Y axis- Pinol displacement on the vertical milling head- Fixed angle table- Coolant device with mechanical pump in the machine foot-

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 52185/08 Year of construction 1968Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 250 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.4 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Two motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- Coolant device in the machine foot- Adjacent control cabinet- Counter holder

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 51265/08 Year of construction approx. 1967Travel distances X: 300 mm Y: 150 mm Z: 340 mmTable size 600 x 2100 mmSpindle holder SK 40 - S20 x 2Spindle speed 40-2000 rpm. 16 stagesMotor power 1.0 and 1.6 kW pole-switchableMains connection 380 volts, 50 Hz- Feed in the X and Z axis- Spindle speed over 2 motor speeds and 8 gear stages- Pinol shift on the vertical milling head 60 mm- Fixed angle table- adjacent control cabinetSpace requirement L x W x H 1100 x

Univ. Tool Milling Machine DECKEL Type FP 1Masch. No. 28317 Year of construction approx. 1960Travel distances X: 245 mm Y: 150 mm Z: 340 mmTable size 600 x 210 mmSpindle holder horizontal MK 4 - S20 x 2Spindle speed vertical 95-1900 rpm. 12 stepsSpindle speed horizontal 60-1200 rpm. 12 stepsMotor power 0.8 and 1.1 kW pole-switchableMains connection 380 volts, 50 Hz spindle speed over 2 motor speeds and 6 gear stages- Feed in the X and Z axis coolant device with mechanical pump in the machine base

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill, prism cutter -Angle milling cutters: Attachment angle milling cutters, prism milling cutters -Type: Ø85 x 35 mm -Hole: Ø 27 mm -Quantity: 1x milling cutter available -Dimensions: Ø 85 x 35 mm -Weight: 0.8 kg

- Fast comminution with rotational speeds up to 400 rpm - Loss-free grinding even below 1 μm - Uniform fine comminution of large sample amounts - Safe tensioning of the bowls with Safe-Lock-System - Useful capacity up to 4 x 225 ml Currency; MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)